Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Emad Natsheh has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Toward better solar pv panel fault detection: a multi-ML approach for series and parallel hotspot analysis

    by Sabri Odeh, Emad Natsheh

    Localized overheating, also known as hot spotting, can occur in specific areas of a solar panel where excessive heat is generated within photovoltaic (PV) systems. This problem may occur as a result of uneven distribution of current, inconsistencies in shading, issues with soldering, or failures in the packaging, leading to a condition of reverse bias and localized heating. The presence of hot spots not only accelerates the degradation of PV systems but also increases the risk of permanent damage to the panels. Therefore, it is crucial to promptly identify and rectify any hot spot faults to ensure the safe and reliable operation of the PV system. This research investigates to analyzing hotspots series and parallel faults by incorporating advanced machine learning algorithms for fault detection and classification. Unlike conventional methods that rely solely on hotspots faults in general. Six distinct machine learning classifiers were used to the identification and categorization of early hot-spots in PV modules. Among these classifiers, the artificial neural network (ANN) emerges as the most suitable machine learning technique for early detection of PV hot-spots, exhibiting an impressive detection accuracy of 97% when appropriate data samples are employed. The data collection was done by real measuring instruments such as: current and voltage sensors, also environmental sensors for irradiance and temperature. Before the implementation of the machine learning tool, the data of each examined PV module was applied by preprocessing data methods such as: cleaning, deleting outliers, and transforming raw data into a format suitable for training and evaluating machine learning models.

  • Open Access

    Optimized indoor radio signal prediction with 3D ray tracing model at 2.4 and 5 GHz

    by Saed Tarapiah, Batoul Sulaiman, Emad Natsheh, Shadi Atalla, Suleiman Abu Kharmeh, Abdallah Rashed

    Channel propagation models are essential in developing efficient wireless communication networks. Indoor propagation relies on the nature of the surrounding environment. Therefore, many researchers have provided different ways for effective propagation modeling and received power prediction. In this paper, ray-tracing-based site-specific propagation models are presented. The actual measurements are obtained using many wireless access points (AP) based on IEEE 802.11 with different technologies a/b/g and n as transmitters and mobile phone with a proposed mobile application used as a receiver to collect the power at different locations called reference points (RPs), these measurements are done without the existence of people movement. The simulation results are obtained using wireless InSite simulator depends on 3D shoot and bounce ray (SBR) method. The simulation measurements are assessed by comparing it with the actual measurements and they analyze statistically such that the correlation coefficient R between them reaches up to 80% which is an indicator to an acceptable agreement. Path loss characteristic affected by the building materials and distance along the receiver’s route is evaluated.

  • Open Access

    Indoor WiFi-Beacon Dataset Construction Using Autonomous Low-Cost Robot for 3D Location Estimation

    by Suleiman Abu Kharmeh, Emad Natsheh, Batoul Sulaiman, Mohammad Abuabiah, Saed Tarapiah

    Datasets used for artificial-neural-network and machine-learning applications play a vital role in the research and application of such techniques in solving real-life problems. The construction and availability of large datasets to be used in the off-line phase of ANN training is usually a crucial and time-consuming step towards system construction. In this work, a framework for autonomous construction of a diverse, extensive, and open dataset* with built-in redundancy is demonstrated. As part of the framework, a low-cost robot using off-the-shelf components is built that constructs the dataset autonomously. The robot includes a controller network with multiple WiFi-transceiver nodes for collecting received-signal-strength indicators (RSSIs) at various elevation points throughout the building. All nodes are configured with direct internet access to streamline the data collection towards an online database that is constructed as part of this framework. Preliminary validation and analysis of the dataset are discussed, and an exploration of the application domain of the dataset is carried out. Moreover, this paper investigates the effect of the height of the hand-held mobile WiFi antenna attached to the robot on the received power strength of the WiFi signal.


  • Open Access

    A Multi-Level World Comprehensive Neural Network Model for Maximum Annual Solar Irradiation on a Flat Surface

    by Ramez Abdallah, Emad Natsheh, Adel Juaidi, Sufyan Samara, Francisco Manzano-Agugliaro

    With the growing demand for clean and economically feasible renewable energy, solar photovoltaic (PV) system usage has increased. Among many factors, the tilt and azimuth angles are of great importance and influence in determining the photovoltaic panel’s efficiency to generate electricity. Although much research was conducted related to solar PV panels’ performance, this work critically determined the tilt and azimuth angles for PV panels in all countries worldwide. The optimum tilt and azimuth angles are estimated worldwide by the photovoltaic geographic information system (PVGIS). Also, annual and average daily solar irradiation incident on the tilted and oriented plate optimally (AR1 and DR1) are calculated. Besides, annual and average daily solar irradiation incident on plate tilt optimally and oriented because of the south in the northern hemisphere and because of the north in the southern hemisphere (AR2 and DR2) are estimated. PVGIS is also used to calculate the annual and average daily solar irradiation incident on the horizontal plate (AR3 and DR3). The data collected from PVGIS are used to develop an efficient and accurate artificial neural network model based on feed-forward neural network approach. This model is an essential subpart that can be used in an embedded system or an online system for further PV system analysis and optimization. The developed neural model reflected very high accuracy in predicting the PV panels’ optimal tilt and azimuth angles worldwide. The benefit of tilting is generally increased by increasing the latitude. As the latitude increases, the tilt factor (F) increases because of the increase in the optimum tilt angle by increasing the latitude. The optimal orientation is due to the north in the southern hemisphere and due to the south in the northern hemisphere for most cities worldwide. In sum, it can be concluded that the optimum tilt angle is equal to or greater than the latitude until the latitude 30°. The optimum tilt angle becomes less than the latitude, and the difference is increased until it reaches more than 20°. Hence in this study the aim is to develop a simple neural network model which can accurately predict the annual radiation and optimum tilt and azimuth angle in any region of the world and can be easily implemented in a low-cost microcontroller.


  • Open Access

    Tree Search Fuzzy NARX Neural Network Fault Detection Technique for PV Systems with IoT Support

    by Emad Natsheh, Sufyan Samara

    The photovoltaic (PV) panel’s output energy depends on many factors. As they are becoming the leading alternative energy source, it is essential to get the best out of them. Although the main factor for maximizing energy production is proportional to the amount of solar radiation reaching the photovoltaic panel surface, other factors, such as temperature and shading, influence them negatively. Moreover, being installed in a dynamic and frequently harsh environment causes a set of reasons for faults, defects, and irregular operations. Any irregular operation should be recognized and classified into faults that need attention and, therefore, maintenance or as being a regular operation due to changes in some surrounding factors, such as temperature or solar radiation. Besides, in case of faults, it would be helpful to identify the source and the cause of the problem. Hence, this study presented a novel methodology that modeled a PV system in a tree-like hierarchy, which allowed the use of a fuzzy nonlinear autoregressive network with exogenous inputs (NARX) to detect and classify faults in a PV system with customizable granularity. Moreover, the used methodology enabled the identification of the exact source of fault(s) in a fully automated way. The study was done on a string of eight PV panels; however, the paper discussed using the algorithm on a more extensive PV system. The used fuzzy NARX algorithm in this study was able to classify the faults that appeared in up to five out of the eight PV panels and to identify the faulty PV panels with high accuracy. The used hardware could be controlled and monitored through a Wi-Fi connection, which added support for Internet of Things applications.


  • Open Access

    Intelligent PV Panels Fault Diagnosis Method Based on NARX Network and Linguistic Fuzzy Rule-Based Systems

    by Sufyan Samara, Emad Natsheh

    The expanding use of photovoltaic (PV) systems as an alternative green source for electricity presents many challenges, one of which is the timely diagnosis of faults to maintain the quality and high productivity of such systems. In recent years, various studies have been conducted on the fault diagnosis of PV systems. However, very few instances of fault diagnostic techniques could be implemented on integrated circuits, and these techniques require costly and complex hardware. This work presents a novel and effective, yet small and implementable, fault diagnosis algorithm based on an artificial intelligent nonlinear autoregressive exogenous (NARX) neural network and Sugeno fuzzy inference. The algorithm uses Sugeno fuzzy inference to isolate and classify faults that may occur in a PV system. The fuzzy inference requires the actual sensed PV system output power, the predicted PV system output power, and the sensed surrounding conditions. An artificial intelligent NARX-based neural network is used to obtain the predicted PV system output power. The actual output power of the PV system and the surrounding conditions are obtained in real-time using sensors. The algorithm is proven to be implementable on a low-cost microcontroller. The obtained results indicate that the fault diagnosis algorithm can detect multiple faults such as open and short circuit degradation, faulty maximum power point tracking (MPPT), and conditions of partial shading (PS) that may affect the PV system. Moreover, radiation and temperature, among other non-linear associations of patterns between predictors, can be captured by the proposed algorithm to determine the accurate point of the maximum power for the PV system.


  • Open Access

    Toward Better PV Panel’s Output Power Prediction; a Module Based on Nonlinear Autoregressive Neural Network with Exogenous Inputs

    by Emad Natsheh, Sufyan Samara

    Much work has been carried out for modeling the output power of photovoltaic panels. Using artificial neural networks (ANNS), one could efficiently model the output power of heterogeneous photovoltaic (HPV) panels. However, due to the existing different types of artificial neural network implementations, it has become hard to choose the best approach to use for a specific application. This raises the need for studies that develop models using the different neural networks types and compare the efficiency of these different types for that specific application. In this work, two neural network types, namely, the nonlinear autoregressive network with exogenous inputs (NARX) and the deep feed-forward (DFF) neural network, have been developed and compared for modeling the maximum output power of HPV panels. Both neural networks have four exogenous inputs and two outputs. Matlab/Simulink is used in evaluating the proposed two models under a variety of atmospheric conditions. A comprehensive evaluation, including a Diebold-Mariano (DM) test, is applied to verify the ability of the proposed networks. Moreover, the work further investigates the two developed neural networks using their actual implementation on a low-cost microcontroller. Both neural networks have performed very well; however, the NARX model performance is much better compared with DFF. Using the NARX network, a prediction of PV output power could be obtained, with half the execution time required to obtain the same prediction with the DFF neural network, and with accuracy of ±0.18 W.