Ebrahim Nazarimofrad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ebrahim Nazarimofrad has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Seyed Mehdi Zahrai
School of Civil Engineering, College of Engineering, University of Tehran, Tehran, Iran
5 shared publications Ali Barkhordar
1 shared publicationAli Shokrgozar
Department of Civil and Environmental Engineering Idaho State University Pocatello Idaho USA
1 shared publication- Behnam Golfam1 shared publication
- Faiz Uddin Ahmed Shaikh
School of Civil and Mechanical Engineering, Curtin University
1 shared publication Mahmoud Nili
Civil Engineering Department, Bu-Ali Sina University, Hamedan, Iran
1 shared publication
Latest Publications
- 1 August 2019
- Published by Wiley in The Structural Design of Tall and Special Buildings
- Vol. 28 (16) , e1666
Seismic performance of steel braced frames with self‐centering buckling‐restrained brace utilizing superelastic shape memory alloys
Summary: Buckling‐restrained braced frame (BRB) is one of the newest seismic force‐resisting systems used in buildings. However, one of the requirements for designing a structure is to provide a ductility behavior of structures to dissipate earthquake energy and to avoid residual drifts. These days, self‐centering seismic lateral force‐resisting systems have drawn attention due to their potentials to solve the above mentioned issues. On the other hand, shape memory alloys (SMAs) are characterized by unique superelastic behavior, which enables the material to recover its original shape after experiencing large deformations. The goal of this study is to assess BRBs whose ductility are improved by utilizing SMA. Nonlinear time history and incremental dynamic analysis techniques are applied to investigate the behavior of the two frames with different stories (four and eight stories) under different ground motion records. The results showed that utilizing BRB made of hybrid steel and SMA resulted in increasing ductility of the structure and decreasing residual displacements of the structures.
- 1 August 2019
- Published by Wiley in The Structural Design of Tall and Special Buildings
- Vol. 28 (16) , e1666
Seismic performance of steel braced frames with self‐centering buckling‐restrained brace utilizing superelastic shape memory alloys
Summary: Buckling‐restrained braced frame (BRB) is one of the newest seismic force‐resisting systems used in buildings. However, one of the requirements for designing a structure is to provide a ductility behavior of structures to dissipate earthquake energy and to avoid residual drifts. These days, self‐centering seismic lateral force‐resisting systems have drawn attention due to their potentials to solve the above mentioned issues. On the other hand, shape memory alloys (SMAs) are characterized by unique superelastic behavior, which enables the material to recover its original shape after experiencing large deformations. The goal of this study is to assess BRBs whose ductility are improved by utilizing SMA. Nonlinear time history and incremental dynamic analysis techniques are applied to investigate the behavior of the two frames with different stories (four and eight stories) under different ground motion records. The results showed that utilizing BRB made of hybrid steel and SMA resulted in increasing ductility of the structure and decreasing residual displacements of the structures.
- 26 December 2018
- Published by Wiley in The Structural Design of Tall and Special Buildings
- Vol. 28 (4)
Multiobjective optimal placement of active tendons to control irregular multistory buildings with soil–structure interaction
Summary: In recent decades, many researchers have conducted research studies on structural control to improve the safety and serviceability of high‐rise buildings against earthquakes and strong winds. On the other hand, applying active control systems and controlling strategies in buildings are costly process, and it is necessary to reduce the number of controllers.In this paper, a multiobjective genetic algorithm is proposed to optimize the placement of active tendons in a 2D shear frame and a 3D irregular building considering soil–structure interaction effect to reduce active control cost and response of structures at the same time. For multiobjective optimization, multiobjective genetic algorithm of the MATLAB toolbox is used to find a set of Pareto optimal solutions for a multiobjective minimization. The results indicate that the method is capable of finding the number and location of the required active tendons in both 2D shear frame and 3D irregular building with 10 and 20 stories while the base shear of structure is minimized. The specific advantage of the employed algorithms is to reduce the number of mounted active tendons approximately by 50%.
- 26 December 2018
- Published by Wiley in The Structural Design of Tall and Special Buildings
- Vol. 28 (4)
Multiobjective optimal placement of active tendons to control irregular multistory buildings with soil–structure interaction
Summary: In recent decades, many researchers have conducted research studies on structural control to improve the safety and serviceability of high‐rise buildings against earthquakes and strong winds. On the other hand, applying active control systems and controlling strategies in buildings are costly process, and it is necessary to reduce the number of controllers.In this paper, a multiobjective genetic algorithm is proposed to optimize the placement of active tendons in a 2D shear frame and a 3D irregular building considering soil–structure interaction effect to reduce active control cost and response of structures at the same time. For multiobjective optimization, multiobjective genetic algorithm of the MATLAB toolbox is used to find a set of Pareto optimal solutions for a multiobjective minimization. The results indicate that the method is capable of finding the number and location of the required active tendons in both 2D shear frame and 3D irregular building with 10 and 20 stories while the base shear of structure is minimized. The specific advantage of the employed algorithms is to reduce the number of mounted active tendons approximately by 50%.
- 1 December 2018
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 115, 838-852
Fuzzy control of asymmetric plan buildings with active tuned mass damper considering soil-structure interaction
- 1 December 2018
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 115, 838-852
Fuzzy control of asymmetric plan buildings with active tuned mass damper considering soil-structure interaction
- 1 November 2018
- Published by Elsevier in Applied Mathematical Modelling
- Vol. 63, 362-373
Bending, second-order and buckling analysis of non-prismatic beam-columns by differential quadrature method
- 1 November 2018
- Published by Elsevier in Applied Mathematical Modelling
- Vol. 63, 362-373
Bending, second-order and buckling analysis of non-prismatic beam-columns by differential quadrature method
- 13 March 2018
- Published by Taylor & Francis in Australian Journal of Structural Engineering
- Vol. 19 (2) , 118-130
Evaluation of the seismic behavior of semi-supported steel shear walls with different ratio and shape of openings
One of the most important advantages of the steel plate shear wall is to create openings with different sizes and arbitrary locations on the infill plate depending on their application. In this study, the effects of the semi-supported steel shear walls (SSSWs) with square and rectangular openings on the seismic behavior of the structural systems are investigated. The ultimate strength, stiffness and energy absorption of the SSSWs are evaluated under non-linear static analysis and cyclic loading for different opening ratios and the results are compared. The results showed that the openings in the walls have a substantial effect on the seismic behavior of the system for different opening ratios and must be considered in the design stage of the buildings.
- 13 March 2018
- Published by Taylor & Francis in Australian Journal of Structural Engineering
- Vol. 19 (2) , 118-130
Evaluation of the seismic behavior of semi-supported steel shear walls with different ratio and shape of openings
One of the most important advantages of the steel plate shear wall is to create openings with different sizes and arbitrary locations on the infill plate depending on their application. In this study, the effects of the semi-supported steel shear walls (SSSWs) with square and rectangular openings on the seismic behavior of the structural systems are investigated. The ultimate strength, stiffness and energy absorption of the SSSWs are evaluated under non-linear static analysis and cyclic loading for different opening ratios and the results are compared. The results showed that the openings in the walls have a substantial effect on the seismic behavior of the system for different opening ratios and must be considered in the design stage of the buildings.
- 17 April 2017
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 25 (7) , 592-599
Effect of rotationally restrained and Pasternak foundation on buckling of an orthotropic rectangular Mindlin plate
- 17 April 2017
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 25 (7) , 592-599
Effect of rotationally restrained and Pasternak foundation on buckling of an orthotropic rectangular Mindlin plate
- 1 October 2016
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 89, 100-115
Seismic control of irregular multistory buildings using active tendons considering soil–structure interaction effect
- 1 October 2016
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 89, 100-115
Seismic control of irregular multistory buildings using active tendons considering soil–structure interaction effect
- 9 September 2016
- Published by Taylor & Francis in Journal of Sustainable Cement-Based Materials
- Vol. 6 (1) , 54-68
Effects of steel fibre and silica fume on impact behaviour of recycled aggregate concrete
This paper presents the effects of silica fume and steel fiber on the mechanical properties and impact behavior of recycled aggregate concrete containing two types of recycled coarse aggregates (RCAs). In total, 20 series of concretes are considered and they are divided into 4 groups. The first group consisted of 1 control concrete containing natural coarse aggregate and 4 control recycled aggregates concretes containing 50 and 100% RCA of two types (A and B). The second and third series are similar to the first series in every aspect except the former contained 8% silica fume as partial replacement of ordinary Portland cement and the latter contained 1% steel fiber by volume. In the fourth series, both 8% silica fume and 1% steel fiber are used. Compressive and split tensile strengths of all concretes are measured in terms of mechanical properties evaluation and low velocity impact hammer test is conducted to evaluate the impact behavior of all concretes. Results show that the concrete containing RCA obtained from high strength parent concrete exhibited better mechanical properties than that containing RCA made low strength concrete. The addition of silica fume improved the split tensile and compressive strengths of recycled aggregate concretes containing both types of coarse aggregates. The addition of steel fibers significantly increased the compressive and split tensile strengths of all concretes, especially recycled aggregate concretes. The simultaneous use of silica fume and steel fibers had a significant effect on the compressive and split tensile strengths of all recycled aggregate concretes, probably due to better bond of steel fibers with mortar containing silica fume as well as improved ITZ between RCA and mortar. The addition of 100% RCA of both types significantly reduced the impact resistance of recycled aggregate concretes. The same is also true even when silica fume is added. The addition of steel fibers significantly improved the impact behavior of recycled aggregate concretes. The addition of silica fume, however, did not show any significant improvement in impact resistance of steel fiber-reinforced recycled aggregate concretes.
- 9 September 2016
- Published by Taylor & Francis in Journal of Sustainable Cement-Based Materials
- Vol. 6 (1) , 54-68
Effects of steel fibre and silica fume on impact behaviour of recycled aggregate concrete
This paper presents the effects of silica fume and steel fiber on the mechanical properties and impact behavior of recycled aggregate concrete containing two types of recycled coarse aggregates (RCAs). In total, 20 series of concretes are considered and they are divided into 4 groups. The first group consisted of 1 control concrete containing natural coarse aggregate and 4 control recycled aggregates concretes containing 50 and 100% RCA of two types (A and B). The second and third series are similar to the first series in every aspect except the former contained 8% silica fume as partial replacement of ordinary Portland cement and the latter contained 1% steel fiber by volume. In the fourth series, both 8% silica fume and 1% steel fiber are used. Compressive and split tensile strengths of all concretes are measured in terms of mechanical properties evaluation and low velocity impact hammer test is conducted to evaluate the impact behavior of all concretes. Results show that the concrete containing RCA obtained from high strength parent concrete exhibited better mechanical properties than that containing RCA made low strength concrete. The addition of silica fume improved the split tensile and compressive strengths of recycled aggregate concretes containing both types of coarse aggregates. The addition of steel fibers significantly increased the compressive and split tensile strengths of all concretes, especially recycled aggregate concretes. The simultaneous use of silica fume and steel fibers had a significant effect on the compressive and split tensile strengths of all recycled aggregate concretes, probably due to better bond of steel fibers with mortar containing silica fume as well as improved ITZ between RCA and mortar. The addition of 100% RCA of both types significantly reduced the impact resistance of recycled aggregate concretes. The same is also true even when silica fume is added. The addition of steel fibers significantly improved the impact behavior of recycled aggregate concretes. The addition of silica fume, however, did not show any significant improvement in impact resistance of steel fiber-reinforced recycled aggregate concretes.
- 16 March 2016
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 23 (10) , 1144-1148
Buckling analysis of orthotropic rectangular plate resting on Pasternak elastic foundation under biaxial in-plane loading
- 16 March 2016
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 23 (10) , 1144-1148
Buckling analysis of orthotropic rectangular plate resting on Pasternak elastic foundation under biaxial in-plane loading