Josef Chmelař
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Josef Chmelař has a total of 77 co-authors. Here are the top co-authors by number of shared publications:
- Juraj Kosek
University of Chemistry and Technology Prague, Department of Chemical Engineering, Technicka 5, 166 28 Prague, Czech Republic
10 shared publications Vladimír Velebný
Contipro As, Dolni Dobrouc 401, Dolni Dobrouc 56102, Czech Republic
6 shared publicationsMartina Hermannová
Contipro As, Dolni Dobrouc 401, Dolni Dobrouc 56102, Czech Republic
5 shared publicationsJaromír Kulhánek
Contipro a.s., Dolní Dobrouč 401, 561 02 Dolní Dobrouč, Czech Republic
3 shared publicationsPetr Bělský
New Technologies Research Centre, University of West Bohemia, Univerzitni 8, 306 14 Pilsen, Czech Republic
3 shared publicationsAndra Nistor
Department of Chemical Engineering, Institute of Chemical Technology Prague, Technická 5, 166 28 Prague 6, Czech Republic
2 shared publications
Latest Publications
- Open Access
- 18 October 2023
- Published by MDPI AG in Pharmaceutics
- Vol. 15 (10) , 2487
Enhancing Dental Applications: A Novel Approach for Incorporating Bioactive Substances into Textile Threads
In the realm of surgical and dental applications, hyaluronic acid (HA) braided threads show significant therapeutic potential due to their incorporation of pharmaceutical active ingredients. This study primarily focuses on resolving the crucial challenge of devising a deposition method that can ensure both precision and uniformity in the content of the active ingredient Octenidine dihydrochloride (OCT) within each segment of the threads. Our objective in this study was to develop a continuous deposition method for OCT onto a braided thread composed of 24 hyaluronic acid-based fibers, aiming for a specific OCT content of 0.125 µg/mm, while maintaining a maximum allowable deviation of ±15% in OCT content. The motivation behind designing this novel method stemmed from the necessity of employing a volatile solvent for the active agent. Conventional wetting methods proved unsuitable due to fluctuations in the solution’s concentration during deposition, and alternative methods known to us demanded intricate technical implementations. The newly introduced method offers distinct advantages, including its online processing speed, scalability potential, and cost-efficiency of the active agent solution. Additionally, it minimizes the impact on the natural polymer thread, preserving energy by obviating the need for complete thread saturation. Our research and precise apparatus development resulted in achieving the desired thread properties, with an OCT content of (1.51 ± 0.09) µg per 12 mm thread piece. These findings not only validate the suitability of this innovative method for depositing active agents but also extend its potential applicability beyond dental care.
- 18 October 2023
- Published by MDPI AG in Pharmaceutics
- Vol. 15 (10) , 2487
Open AccessEnhancing Dental Applications: A Novel Approach for Incorporating Bioactive Substances into Textile Threads
In the realm of surgical and dental applications, hyaluronic acid (HA) braided threads show significant therapeutic potential due to their incorporation of pharmaceutical active ingredients. This study primarily focuses on resolving the crucial challenge of devising a deposition method that can ensure both precision and uniformity in the content of the active ingredient Octenidine dihydrochloride (OCT) within each segment of the threads. Our objective in this study was to develop a continuous deposition method for OCT onto a braided thread composed of 24 hyaluronic acid-based fibers, aiming for a specific OCT content of 0.125 µg/mm, while maintaining a maximum allowable deviation of ±15% in OCT content. The motivation behind designing this novel method stemmed from the necessity of employing a volatile solvent for the active agent. Conventional wetting methods proved unsuitable due to fluctuations in the solution’s concentration during deposition, and alternative methods known to us demanded intricate technical implementations. The newly introduced method offers distinct advantages, including its online processing speed, scalability potential, and cost-efficiency of the active agent solution. Additionally, it minimizes the impact on the natural polymer thread, preserving energy by obviating the need for complete thread saturation. Our research and precise apparatus development resulted in achieving the desired thread properties, with an OCT content of (1.51 ± 0.09) µg per 12 mm thread piece. These findings not only validate the suitability of this innovative method for depositing active agents but also extend its potential applicability beyond dental care.
- 11 February 2023
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 234, 123654
Water-insoluble fibres, threads, and fabrics from lauroyl derivatives of hyaluronan
- 11 February 2023
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 234, 123654
Water-insoluble fibres, threads, and fabrics from lauroyl derivatives of hyaluronan
- Open Access
- 23 December 2021
- Published by MDPI AG in Biomolecules
- Vol. 12 (1) , 16
Nonwoven Textiles from Hyaluronan for Wound Healing Applications
Nonwoven textiles are used extensively in the field of medicine, including wound healing, but these textiles are mostly from conventional nondegradable materials, e.g., cotton or synthetic polymers such as polypropylene. Therefore, we aimed to develop nonwoven textiles from hyaluronan (HA), a biocompatible, biodegradable and nontoxic polysaccharide naturally present in the human body. For this purpose, we used a process based on wet spinning HA into a nonstationary coagulation bath combined with the wet-laid textile technology. The obtained HA nonwoven textiles are soft, flexible and paper like. Their mechanical properties, handling and hydration depend on the microscale fibre structure, which is tuneable by selected process parameters. Cell viability testing on two relevant cell lines (3T3, HaCaT) demonstrated that the textiles are not cytotoxic, while the monocyte activation test ruled out pyrogenicity. Biocompatibility, biodegradability and their high capacity for moisture absorption make HA nonwoven textiles a promising material for applications in the field of wound healing, both for topical and internal use. The beneficial effect of HA in the process of wound healing is well known and the form of a nonwoven textile should enable convenient handling and application to various types of wounds.
- 23 December 2021
- Published by MDPI AG in Biomolecules
- Vol. 12 (1) , 16
Open AccessNonwoven Textiles from Hyaluronan for Wound Healing Applications
Nonwoven textiles are used extensively in the field of medicine, including wound healing, but these textiles are mostly from conventional nondegradable materials, e.g., cotton or synthetic polymers such as polypropylene. Therefore, we aimed to develop nonwoven textiles from hyaluronan (HA), a biocompatible, biodegradable and nontoxic polysaccharide naturally present in the human body. For this purpose, we used a process based on wet spinning HA into a nonstationary coagulation bath combined with the wet-laid textile technology. The obtained HA nonwoven textiles are soft, flexible and paper like. Their mechanical properties, handling and hydration depend on the microscale fibre structure, which is tuneable by selected process parameters. Cell viability testing on two relevant cell lines (3T3, HaCaT) demonstrated that the textiles are not cytotoxic, while the monocyte activation test ruled out pyrogenicity. Biocompatibility, biodegradability and their high capacity for moisture absorption make HA nonwoven textiles a promising material for applications in the field of wound healing, both for topical and internal use. The beneficial effect of HA in the process of wound healing is well known and the form of a nonwoven textile should enable convenient handling and application to various types of wounds.
- 1 October 2021
- Published by Elsevier in International Journal of Pharmaceutics
- Vol. 608, 121111
Lauroyl hyaluronan films for local drug delivery: Preparation and factors influencing the release of small molecules
- 1 October 2021
- Published by Elsevier in International Journal of Pharmaceutics
- Vol. 608, 121111
Lauroyl hyaluronan films for local drug delivery: Preparation and factors influencing the release of small molecules
- 1 November 2019
- Published by Elsevier in Carbohydrate Polymers
- Vol. 224, 115162
Biodegradable free-standing films from lauroyl derivatives of hyaluronan
- 1 November 2019
- Published by Elsevier in Carbohydrate Polymers
- Vol. 224, 115162
Biodegradable free-standing films from lauroyl derivatives of hyaluronan
- 9 April 2019
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 58 (17) , 7037-7043
Sorption of Liquid Diluents in Polyethylene: Comprehensive Experimental Data for Slurry Polymerization
- 9 April 2019
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 58 (17) , 7037-7043
Sorption of Liquid Diluents in Polyethylene: Comprehensive Experimental Data for Slurry Polymerization
- 17 January 2019
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 220 (5)
Convective Patterns in Solution‐Casted Films from Acylated Hyaluronan
The evaporation of thin solution layers is an important process taking place in fields such as distillation, coating, or thin film manufacturing. Under suitable conditions, evaporation can induce convective flow by creating gradients in surface tension (Bénard–Marangoni instability) or density. These phenomena have been studied by many authors, but detailed and illustrative visualizations of real experiments are surprisingly scarce compared to simulation results and drawn schemes. Therefore, detailed and representative visualizations of regular Bénard–Marangoni convective cell patterns are provided in solution‐casted films from acylated hyaluronan. The visualizations agree with predictions made in the literature, thus providing important experimental validation. Most importantly, structures resulting from both horizontal and vertical convective flow are clearly visible. In a subsequent parametric study, the effects of selected parameters on the size of the convective cells are elucidated. The results suggest that the cell size increases with increasing solution layer height and increasing polymer concentration, while no statistically significant effect is observed for the degree of hyaluronan substitution.
- 17 January 2019
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 220 (5)
Convective Patterns in Solution‐Casted Films from Acylated Hyaluronan
The evaporation of thin solution layers is an important process taking place in fields such as distillation, coating, or thin film manufacturing. Under suitable conditions, evaporation can induce convective flow by creating gradients in surface tension (Bénard–Marangoni instability) or density. These phenomena have been studied by many authors, but detailed and illustrative visualizations of real experiments are surprisingly scarce compared to simulation results and drawn schemes. Therefore, detailed and representative visualizations of regular Bénard–Marangoni convective cell patterns are provided in solution‐casted films from acylated hyaluronan. The visualizations agree with predictions made in the literature, thus providing important experimental validation. Most importantly, structures resulting from both horizontal and vertical convective flow are clearly visible. In a subsequent parametric study, the effects of selected parameters on the size of the convective cells are elucidated. The results suggest that the cell size increases with increasing solution layer height and increasing polymer concentration, while no statistically significant effect is observed for the degree of hyaluronan substitution.
- 1 September 2018
- Published by Elsevier in Carbohydrate Polymers
- Vol. 195, 468-475
Nanostructure of hyaluronan acyl-derivatives in the solid state
- 1 September 2018
- Published by Elsevier in Carbohydrate Polymers
- Vol. 195, 468-475
Nanostructure of hyaluronan acyl-derivatives in the solid state
- 13 March 2017
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 134 (27)
Swelling of polyethylene particles and its relation to sorption equilibria under gas‐phase polymerization conditions
The attempts to predict the swelling of semicrystalline polyolefins using equations of state have not been successful so far and the few conducted experimental investigations have been limited to a narrow range of samples and conditions. This article presents a systematic video‐microscopic study of the swelling induced in various grades of PE particles by the sorption of ethylene and co‐monomers (propylene, 1‐hexene) at condition relevant to gas‐phase polymerization. Based on experimental data for various PE densities, the swelling factor H was evaluated, which enables the prediction of PE swelling by ethylene. The swelling data were compared with the corresponding gravimetrically measured sorption isotherms. In the case of ethylene and propylene sorption, the swelling significantly influences the evaluation of sorption isotherms. Conversely, the effect of swelling was negligible for higher hydrocarbons. The observed impact of swelling on the sorption is discussed based on the evaluated partial molar volumes of penetrants. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45035.
- 13 March 2017
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 134 (27)
Swelling of polyethylene particles and its relation to sorption equilibria under gas‐phase polymerization conditions
The attempts to predict the swelling of semicrystalline polyolefins using equations of state have not been successful so far and the few conducted experimental investigations have been limited to a narrow range of samples and conditions. This article presents a systematic video‐microscopic study of the swelling induced in various grades of PE particles by the sorption of ethylene and co‐monomers (propylene, 1‐hexene) at condition relevant to gas‐phase polymerization. Based on experimental data for various PE densities, the swelling factor H was evaluated, which enables the prediction of PE swelling by ethylene. The swelling data were compared with the corresponding gravimetrically measured sorption isotherms. In the case of ethylene and propylene sorption, the swelling significantly influences the evaluation of sorption isotherms. Conversely, the effect of swelling was negligible for higher hydrocarbons. The observed impact of swelling on the sorption is discussed based on the evaluated partial molar volumes of penetrants. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45035.