Koji Morita
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Koji Morita has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
Kazuhiro Tsuga
Department of Advanced Prosthodontics, Hiroshima University, Graduate School of Biomedical and Health Sciences, Japan
10 shared publicationsYasumasa Akagawa
Department of Advanced Prosthetic Dentistry, Hiroshima University Graduate School of Biomedical & Health Sciences, Hiroshima, Japan
7 shared publicationsKazuya Doi
Department of Advanced Prosthodontics, Hiroshima University, Graduate School of Biomedical and Health Sciences, Japan
6 shared publicationsFumiko Nishio
Department of Fixed Prosthetic Dentistry, Field of Oral and Maxillofacial Rehabilitation, Graduate School of Medical and Dental Sciences, Kagoshima University, Japan
5 shared publicationsHiroki Tsuka
5 shared publicationsTakayasu Kubo
Hiroshima University, Japan
5 shared publications
Latest Publications
- 26 May 2026
- Published by Elsevier in Journal of Oral Biosciences
- Vol. 68 (4) , 100792
Masticatory performance and fecal propionate levels in healthy young adults: a cross-sectional study
- 26 May 2026
- Published by Elsevier in Journal of Oral Biosciences
- Vol. 68 (4) , 100792
Masticatory performance and fecal propionate levels in healthy young adults: a cross-sectional study
- Open Access
- 1 August 2025
- Published by Taylor & Francis in Clinical, Cosmetic and Investigational Dentistry
- Vol. ume 17, 375-380
A Case of Oral Lichen Planus; Unresponsive to Dental Metals Removal Despite the Suspected Diagnosis of Metal Allergy
Introduction: Metal allergies can cause mucosal inflammation when triggered by dental materials. Oral lichen planus (OLP) is a chronic inflammatory disorder with multiple causes, including autoimmune factors, stress, and allergic reactions to dental metals. Differentiating between OLP and metal allergies in the oral cavity can be clinically challenging. This report presents a case initially suspected to be metal allergy but later confirmed as OLP. Patients and Methods: A 55-year-old female presented with redness and pain near the buccal gingiva of the right mandibular first molar, along with white lace-like patches. Intraoral examination revealed multiple metal restorations, and element analysis identified Zn and Co in several crowns. Based on these findings, a metal allergy was diagnosed. All metal crowns were replaced with zirconia. However, symptoms persisted. A biopsy later confirmed OLP, and steroid therapy was initiated. Results: Despite removal of the suspected allergenic metals, the inflammation did not resolve, suggesting metal allergy was not the primary cause. Subsequent treatment with steroids led to gradual resolution, supporting the diagnosis of OLP as the primary condition. Conclusion: This case highlights the diagnostic difficulty in differentiating between metal allergy and OLP. Clinicians should consider OLP when symptoms persist despite metal replacement. A multidisciplinary approach is essential to achieve accurate diagnosis and effective treatment.
- 1 August 2025
- Published by Taylor & Francis in Clinical, Cosmetic and Investigational Dentistry
- Vol. ume 17, 375-380
Open AccessA Case of Oral Lichen Planus; Unresponsive to Dental Metals Removal Despite the Suspected Diagnosis of Metal Allergy
Introduction: Metal allergies can cause mucosal inflammation when triggered by dental materials. Oral lichen planus (OLP) is a chronic inflammatory disorder with multiple causes, including autoimmune factors, stress, and allergic reactions to dental metals. Differentiating between OLP and metal allergies in the oral cavity can be clinically challenging. This report presents a case initially suspected to be metal allergy but later confirmed as OLP. Patients and Methods: A 55-year-old female presented with redness and pain near the buccal gingiva of the right mandibular first molar, along with white lace-like patches. Intraoral examination revealed multiple metal restorations, and element analysis identified Zn and Co in several crowns. Based on these findings, a metal allergy was diagnosed. All metal crowns were replaced with zirconia. However, symptoms persisted. A biopsy later confirmed OLP, and steroid therapy was initiated. Results: Despite removal of the suspected allergenic metals, the inflammation did not resolve, suggesting metal allergy was not the primary cause. Subsequent treatment with steroids led to gradual resolution, supporting the diagnosis of OLP as the primary condition. Conclusion: This case highlights the diagnostic difficulty in differentiating between metal allergy and OLP. Clinicians should consider OLP when symptoms persist despite metal replacement. A multidisciplinary approach is essential to achieve accurate diagnosis and effective treatment.
- 23 May 2023
- Published by Elsevier in Journal of Oral Biosciences
- Vol. 65 (3) , 253-258
Radiopaque properties of polyetheretherketone crown at laboratory study
- 23 May 2023
- Published by Elsevier in Journal of Oral Biosciences
- Vol. 65 (3) , 253-258
Radiopaque properties of polyetheretherketone crown at laboratory study
- Open Access
- 9 November 2022
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-14
Clinical report of six-month follow-up after cementing PEEK crown on molars
We conducted a six-month clinical follow-up on computer-aided design/computer-aided manufacturing-fabricated molar polyetheretherketone PEEK crowns to investigate their therapeutic effect. Only the PEEK crowns were examined as our study focused on short-term clinical evaluation of the new PEEK material. Twenty-three cases of PEEK crowns placed on the molars of 20 subjects (7 males and 13 females, mean age: 60.6 ± 14.2 years) were included in the study. The evaluation items were the condition of the crowns at the time of cementation and after six months, patient satisfaction, masticatory ability, and occlusal force. Mann–Whitney U tests with a significance level of 5% were used to examine the difference in glucose concentration by masticatory ability, occlusal pressure, and occlusal force, with and without PEEK crowns. The occlusion, margin fit, and contact of all 23 cases at the time of cementing were good. Six months after cementation, there was no crown desorption, fracture or crack, and prosthodontics was not needed in the 22 cases (one patient dropped out). No wear of the dental antagonist was observed. Patient satisfaction was generally high. There was no significant difference in masticatory ability between the groups with and without PEEK crowns. The subject's occlusal force was within the normal range. PEEK crowns used on molars can replace metal crowns and hold promise for an appropriate and effective treatment.
- 9 November 2022
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-14
Open AccessClinical report of six-month follow-up after cementing PEEK crown on molars
We conducted a six-month clinical follow-up on computer-aided design/computer-aided manufacturing-fabricated molar polyetheretherketone PEEK crowns to investigate their therapeutic effect. Only the PEEK crowns were examined as our study focused on short-term clinical evaluation of the new PEEK material. Twenty-three cases of PEEK crowns placed on the molars of 20 subjects (7 males and 13 females, mean age: 60.6 ± 14.2 years) were included in the study. The evaluation items were the condition of the crowns at the time of cementation and after six months, patient satisfaction, masticatory ability, and occlusal force. Mann–Whitney U tests with a significance level of 5% were used to examine the difference in glucose concentration by masticatory ability, occlusal pressure, and occlusal force, with and without PEEK crowns. The occlusion, margin fit, and contact of all 23 cases at the time of cementing were good. Six months after cementation, there was no crown desorption, fracture or crack, and prosthodontics was not needed in the 22 cases (one patient dropped out). No wear of the dental antagonist was observed. Patient satisfaction was generally high. There was no significant difference in masticatory ability between the groups with and without PEEK crowns. The subject's occlusal force was within the normal range. PEEK crowns used on molars can replace metal crowns and hold promise for an appropriate and effective treatment.
- Open Access
- 3 November 2021
- Published by Springer Nature in Research Square
Clinical Report of Six-Month Follow-Up After Cementing PEEK Crown On Molars
To investigate the therapeutic effect of polyetheretherketone (PEEK) crowns, a six-month clinical study on CAD/CAM-fabricated molar PEEK crowns was conducted. Twenty-three cases of PEEK crowns placed on the molars of 20 subjects (7 males and 13 females, mean age: 60.6 ± 14.4 years) were included in the study. The evaluation items were the condition of the crowns at the time of cementation and after six months, patient satisfaction, masticatory ability, and occlusal force. A Wilcoxon signed-rank test with a significance level of 5% was used to examine the difference in masticatory ability with and without PEEK crowns. The occlusion, margin fit, and contact of all 23 cases at the time of cementing was good. Six months after cementation, there was no crown desorption, no fracture or crack, and no prosthodontics was needed in the 22 cases where one patient dropped out. No wear of the dental antagonist was observed. Patient satisfaction was generally high. There was no significant difference in masticatory ability between the groups with and without PEEK crowns. The subject's occlusal force was within normal range. PEEK crowns on molars are highly therapeutic methods and can be fully used as a crown prosthetic material to replace metal.
- 3 November 2021
- Published by Springer Nature in Research Square
Open AccessClinical Report of Six-Month Follow-Up After Cementing PEEK Crown On Molars
To investigate the therapeutic effect of polyetheretherketone (PEEK) crowns, a six-month clinical study on CAD/CAM-fabricated molar PEEK crowns was conducted. Twenty-three cases of PEEK crowns placed on the molars of 20 subjects (7 males and 13 females, mean age: 60.6 ± 14.4 years) were included in the study. The evaluation items were the condition of the crowns at the time of cementation and after six months, patient satisfaction, masticatory ability, and occlusal force. A Wilcoxon signed-rank test with a significance level of 5% was used to examine the difference in masticatory ability with and without PEEK crowns. The occlusion, margin fit, and contact of all 23 cases at the time of cementing was good. Six months after cementation, there was no crown desorption, no fracture or crack, and no prosthodontics was needed in the 22 cases where one patient dropped out. No wear of the dental antagonist was observed. Patient satisfaction was generally high. There was no significant difference in masticatory ability between the groups with and without PEEK crowns. The subject's occlusal force was within normal range. PEEK crowns on molars are highly therapeutic methods and can be fully used as a crown prosthetic material to replace metal.
- Open Access
- 1 September 2020
- Published by Elsevier in Journal of Dental Sciences
- Vol. 15 (3) , 310-314
Association between salivary alpha-amylase and subjective and objective oral parafunctions in community-dwelling elderly individuals
- 1 September 2020
- Published by Elsevier in Journal of Dental Sciences
- Vol. 15 (3) , 310-314
Open AccessAssociation between salivary alpha-amylase and subjective and objective oral parafunctions in community-dwelling elderly individuals
- Open Access
- 1 January 2020
- Published by Medicina Oral, S.L. in Journal of Clinical and Experimental Dentistry
- Vol. 12 (11) , e1011-e1014
Association between masticatory ability and oral functions
Mastication is the process of breaking ingested food with the teeth and mixing it with saliva to form a mass that is easy to swallow. However, few studies have reported on oral functions, such as occlusal force, tongue pressure, and mastication. The purpose of this study was to evaluate the association between masticatory function and oral functions, such as occlusal force and tongue pressure. In this study, there were 113 patients (41 men and 72 women; mean age, 68.4 ± 11.3 years) who visited dentists at the Hiroshima University Hospital, Hiroshima, Japan between April 2015 and November 2018. Masticatory function of the patients was evaluated using a masticatory ability test system. In addition, occlusal force was measured using a pressure-sensitive film and the maximum tongue pressure was measured with a tongue pressure measuring device according to a conventional method. The relationship of masticatory ability with occlusal force and tongue pressure was examined using multivariate analysis while considering patients’ age, gender, and the number of remaining teeth. Masticatory ability was significantly related to occlusal force, maximum tongue pressure, age, body mass index, the number of remaining teeth, and occlusal contact area (p< 0.05). Multiple regression analysis identified that masticatory ability was significantly associated (p< 0.05) with occlusal force and maximum tongue pressure. Masticatory ability was significantly associated with occlusal force and maximum tongue pressure, indicating that the large muscle mass in the oral cavity is indispensable for improving masticatory function. Key words:Mastication, tongue pressure, occlusion force, oral function.
- 1 January 2020
- Published by Medicina Oral, S.L. in Journal of Clinical and Experimental Dentistry
- Vol. 12 (11) , e1011-e1014
Open AccessAssociation between masticatory ability and oral functions
Mastication is the process of breaking ingested food with the teeth and mixing it with saliva to form a mass that is easy to swallow. However, few studies have reported on oral functions, such as occlusal force, tongue pressure, and mastication. The purpose of this study was to evaluate the association between masticatory function and oral functions, such as occlusal force and tongue pressure. In this study, there were 113 patients (41 men and 72 women; mean age, 68.4 ± 11.3 years) who visited dentists at the Hiroshima University Hospital, Hiroshima, Japan between April 2015 and November 2018. Masticatory function of the patients was evaluated using a masticatory ability test system. In addition, occlusal force was measured using a pressure-sensitive film and the maximum tongue pressure was measured with a tongue pressure measuring device according to a conventional method. The relationship of masticatory ability with occlusal force and tongue pressure was examined using multivariate analysis while considering patients’ age, gender, and the number of remaining teeth. Masticatory ability was significantly related to occlusal force, maximum tongue pressure, age, body mass index, the number of remaining teeth, and occlusal contact area (p< 0.05). Multiple regression analysis identified that masticatory ability was significantly associated (p< 0.05) with occlusal force and maximum tongue pressure. Masticatory ability was significantly associated with occlusal force and maximum tongue pressure, indicating that the large muscle mass in the oral cavity is indispensable for improving masticatory function. Key words:Mastication, tongue pressure, occlusion force, oral function.
- 19 February 2019
- Published by Taylor & Francis in Cranio®
- Vol. 39 (1) , 24-28
Association between buccal mucosa ridging and oral feature/symptom and its effects on occlusal function among dentate young adults in a cross-sectional study of Japan
Objective: The purpose of this study was to assess the distinction in oral features/symptoms and occlusal function between young dentate individuals with and without buccal mucosa ridging (BMR). Methods: This cross-sectional study included 200 young adults. The outcome variable was BMR state. The predictor variables were oral features/symptoms (torus palatinus, torus mandibularis, temporomandibular joint noise, bruxism, tongue thrusting habit, number of teeth present, and occlusal vertical dimension) and oral function (occlusal force, occlusal contact area, occlusal pressure, tongue pressure). These variables were compared among participants with and without BMR using univariate and multiple logistic regression analysis. Results: There were 119 participants with BMR and 81 without BMR. Multiple logistic regression analysis revealed that BMR was closely associated with bruxism, occlusal vertical dimension, and occlusal pressure. Discussion: Oral/occlusal changes of increased bruxism, lower occlusal vertical dimension, and lower occlusal pressure constitute the major causes of BMR.
- 19 February 2019
- Published by Taylor & Francis in Cranio®
- Vol. 39 (1) , 24-28
Association between buccal mucosa ridging and oral feature/symptom and its effects on occlusal function among dentate young adults in a cross-sectional study of Japan
Objective: The purpose of this study was to assess the distinction in oral features/symptoms and occlusal function between young dentate individuals with and without buccal mucosa ridging (BMR). Methods: This cross-sectional study included 200 young adults. The outcome variable was BMR state. The predictor variables were oral features/symptoms (torus palatinus, torus mandibularis, temporomandibular joint noise, bruxism, tongue thrusting habit, number of teeth present, and occlusal vertical dimension) and oral function (occlusal force, occlusal contact area, occlusal pressure, tongue pressure). These variables were compared among participants with and without BMR using univariate and multiple logistic regression analysis. Results: There were 119 participants with BMR and 81 without BMR. Multiple logistic regression analysis revealed that BMR was closely associated with bruxism, occlusal vertical dimension, and occlusal pressure. Discussion: Oral/occlusal changes of increased bruxism, lower occlusal vertical dimension, and lower occlusal pressure constitute the major causes of BMR.
- 1 January 2019
- Published by Japan Prosthodontic Society in Journal of Prosthodontic Research
- Vol. 63 (1) , 52-57
Effect of laser groove treatment on shear bond strength of resin-based luting agent to polyetheretherketone (PEEK)
The mechanical properties of polyetheretherketone (PEEK) are ideally suited for fixed dental prostheses. However, PEEK typically has low adhesion strength to resin-based luting agent. This study assessed the shear bond strength between laser groove treated PEEK and resin-based luting agent. A total of 230 specimens were randomly divided into five groups (n=46): no-treatment, air abrasion treatment, 100μm-deep, 150μm-deep, and 200μm-deep laser groove treatments. The surface roughness was measured, scanning electron microscopy was used to observe the specimen surfaces, and X-ray photoelectron spectroscopy (XPS) was used to analyze the surfaces. Each group was divided into four resin-based luting agent subgroups: Panavia V5, RelyX Ultimate Resin Cement, G-CEM Link Force, and Super-Bond C&B. After the resin-based luting agent was bonded to the specimens, the bond strength was measured using shear tests and the failure modes were assessed by stereomicroscopy. The surfaces were also observed by scanning electron microscopy (SEM) after the shear bond strength measurements. The data were statistically analyzed using a two-way analysis of variance and Tukey's honest significant difference test (α=0.05). The PEEK surface after laser groove treatment groups exhibited the highest mean Ra values. In the XPS analysis, the laser treated PEEK surface exhibited an effective surface composition for bonding with resin-based luting agent. The shear bond strengths for the laser groove treated samples were significantly higher (p<0.05) than those of the no-treatment and air abrasion treatment groups. The shear bond strength between PEEK and resin-based luting agent was substantially improved by laser groove treatment.
- 1 January 2019
- Published by Japan Prosthodontic Society in Journal of Prosthodontic Research
- Vol. 63 (1) , 52-57
Effect of laser groove treatment on shear bond strength of resin-based luting agent to polyetheretherketone (PEEK)
The mechanical properties of polyetheretherketone (PEEK) are ideally suited for fixed dental prostheses. However, PEEK typically has low adhesion strength to resin-based luting agent. This study assessed the shear bond strength between laser groove treated PEEK and resin-based luting agent. A total of 230 specimens were randomly divided into five groups (n=46): no-treatment, air abrasion treatment, 100μm-deep, 150μm-deep, and 200μm-deep laser groove treatments. The surface roughness was measured, scanning electron microscopy was used to observe the specimen surfaces, and X-ray photoelectron spectroscopy (XPS) was used to analyze the surfaces. Each group was divided into four resin-based luting agent subgroups: Panavia V5, RelyX Ultimate Resin Cement, G-CEM Link Force, and Super-Bond C&B. After the resin-based luting agent was bonded to the specimens, the bond strength was measured using shear tests and the failure modes were assessed by stereomicroscopy. The surfaces were also observed by scanning electron microscopy (SEM) after the shear bond strength measurements. The data were statistically analyzed using a two-way analysis of variance and Tukey's honest significant difference test (α=0.05). The PEEK surface after laser groove treatment groups exhibited the highest mean Ra values. In the XPS analysis, the laser treated PEEK surface exhibited an effective surface composition for bonding with resin-based luting agent. The shear bond strengths for the laser groove treated samples were significantly higher (p<0.05) than those of the no-treatment and air abrasion treatment groups. The shear bond strength between PEEK and resin-based luting agent was substantially improved by laser groove treatment.
- 1 October 2018
- Published by Japan Prosthodontic Society in Journal of Prosthodontic Research
- Vol. 62 (4) , 432-435
Factors related to masticatory performance in healthy elderly individuals
Maintenance of natural dentition and/or prosthodontic rehabilitation is necessary for good masticatory function. Although other factors such as physical and oral functions are also important for masticatory performance, only a few studies have evaluated their roles. The aim of the current study was to assess factors associated with masticatory performance among elderly individuals, while maintaining and/or reconstructing all occlusal support areas. The present study was designed and implemented as a cross-sectional study, involving a total of 262 participants (mean age: 74.2±5.9years) who participated in the Kyoto Elders Physical Fitness Measurement Research Project. Individuals with partial or complete edentulousness who did not use dentures were excluded from the study. The predictor variables included physical status (i.e., age, gender, body-mass index, and grip strength), oral conditions (i.e., number of present teeth, temporomandibular joint noise, and denture wearer), and oral functions (i.e., maximum voluntary occlusal force; occlusal contact area; cheek pressure; oral diadochokinesis test /pa/, /ta/, /ka/; and maximum voluntary tongue pressure). The variable outcome was masticatory performance. These variables among the participants using univariate and multivariate analyses were compared. Grip strength, number of present teeth, maximum voluntary occlusal force, occlusal contact area, oral diadochokinesis /ka/ /ta/, and maximum voluntary tongue pressure were significant factors for masticatory performance. Stepwise regression analysis showed that grip strength, maximum voluntary occlusal force, and diadochokinesis /ta/ significantly affected masticatory performance. Masticatory performance was closely associated with grip strength, maximum voluntary occlusal force, and diadochokinesis /ta/ among healthy elderly participants.
- 1 October 2018
- Published by Japan Prosthodontic Society in Journal of Prosthodontic Research
- Vol. 62 (4) , 432-435
Factors related to masticatory performance in healthy elderly individuals
Maintenance of natural dentition and/or prosthodontic rehabilitation is necessary for good masticatory function. Although other factors such as physical and oral functions are also important for masticatory performance, only a few studies have evaluated their roles. The aim of the current study was to assess factors associated with masticatory performance among elderly individuals, while maintaining and/or reconstructing all occlusal support areas. The present study was designed and implemented as a cross-sectional study, involving a total of 262 participants (mean age: 74.2±5.9years) who participated in the Kyoto Elders Physical Fitness Measurement Research Project. Individuals with partial or complete edentulousness who did not use dentures were excluded from the study. The predictor variables included physical status (i.e., age, gender, body-mass index, and grip strength), oral conditions (i.e., number of present teeth, temporomandibular joint noise, and denture wearer), and oral functions (i.e., maximum voluntary occlusal force; occlusal contact area; cheek pressure; oral diadochokinesis test /pa/, /ta/, /ka/; and maximum voluntary tongue pressure). The variable outcome was masticatory performance. These variables among the participants using univariate and multivariate analyses were compared. Grip strength, number of present teeth, maximum voluntary occlusal force, occlusal contact area, oral diadochokinesis /ka/ /ta/, and maximum voluntary tongue pressure were significant factors for masticatory performance. Stepwise regression analysis showed that grip strength, maximum voluntary occlusal force, and diadochokinesis /ta/ significantly affected masticatory performance. Masticatory performance was closely associated with grip strength, maximum voluntary occlusal force, and diadochokinesis /ta/ among healthy elderly participants.