Christof Eigner
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Christof Eigner has a total of 171 co-authors. Here are the top co-authors by number of shared publications:
- Christine Silberhorn
Paderborn University
50 shared publications Raimund Ricken
26 shared publicationsViktor Quiring
Paderborn University
25 shared publicationsHarald Herrmann
Paderborn Univ, Dept Phys, Warburger Str 100, Paderborn, Germany
19 shared publicationsBenjamin Brecht
11 shared publications- Matteo Santandrea
Naturwissenschaften - Physik, University of Paderborn, Warburgerstrasse 100, Paderborn, NRW, 33098, GERMANY
11 shared publications
Latest Publications
- 8 June 2026
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 16 (8) , 2668
Lithium niobate tantalate mixed crystals: A versatile platform for nonlinear quantum processes
Many quantum optical applications in spectroscopy, communication and signal analysis rely on spectrally-engineered nonlinear optical interactions to target specific wavelengths or bandwidth. Here, in an established material platform like lithium niobate the achievable wavelength and bandwidth combinations are usually limited by the material’s dispersion and its birefringence. In this regard, mixed crystals of lithium niobate tantalate (LNT) promise a novel material platform, because they allow tuning the birefringence, which is central for type II phase matching devices. Crucially, LNT offers crystal compositions without any birefringence, which still retain their second-order optical nonlinearity. Despite recent progress in the growth and fabrication of LNT, so far no works have investigated the unique properties of LNT for use in electro-optics, nonlinear or quantum optics. In this study, we explore nonlinear optical devices based on LNT for broad- and narrowband nonlinear optical interactions based on recently measured Sellmeier coefficients. Most interestingly, we find that compositions without birefringence allow the design of broadband, degenerate type II phase matching sources spanning the whole near- to mid-infrared range by only changing the poling period and pump wavelength. Such devices are not easily realizable in pure lithium niobate or lithium tantalate. This could potentially allow for more flexible light sources and nonlinear devices in quantum metrology, quantum spectroscopy and quantum communication.
- 8 June 2026
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 16 (8) , 2668
Lithium niobate tantalate mixed crystals: A versatile platform for nonlinear quantum processes
Many quantum optical applications in spectroscopy, communication and signal analysis rely on spectrally-engineered nonlinear optical interactions to target specific wavelengths or bandwidth. Here, in an established material platform like lithium niobate the achievable wavelength and bandwidth combinations are usually limited by the material’s dispersion and its birefringence. In this regard, mixed crystals of lithium niobate tantalate (LNT) promise a novel material platform, because they allow tuning the birefringence, which is central for type II phase matching devices. Crucially, LNT offers crystal compositions without any birefringence, which still retain their second-order optical nonlinearity. Despite recent progress in the growth and fabrication of LNT, so far no works have investigated the unique properties of LNT for use in electro-optics, nonlinear or quantum optics. In this study, we explore nonlinear optical devices based on LNT for broad- and narrowband nonlinear optical interactions based on recently measured Sellmeier coefficients. Most interestingly, we find that compositions without birefringence allow the design of broadband, degenerate type II phase matching sources spanning the whole near- to mid-infrared range by only changing the poling period and pump wavelength. Such devices are not easily realizable in pure lithium niobate or lithium tantalate. This could potentially allow for more flexible light sources and nonlinear devices in quantum metrology, quantum spectroscopy and quantum communication.
- 8 May 2026
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 16 (11) , 3509
Comprehensive Analysis of Poling Dynamics in Rb-Doped KTP Waveguides
Integrated nonlinear optical devices enable the generation of tailored quantum states and highly efficient optical frequency converters. These devices rely on the combination of low-loss waveguides with periodic poling to achieve quasi-phase matching. Potassium titanyl phosphate (KTP) stands out as a prime material for integrated and quantum optical applications due to its favorable dispersion properties and high optical nonlinearities. However, the fabrication of periodically poled waveguides in KTP presents significant challenges, limiting its broader applicability. A profound understanding of the underlying material properties and mechanisms is essential to enhance the reproducible fabrication process and ensure reliability. In this paper, we investigate the poling dynamics and material behavior of locally rubidium-doped KTP with a focus on periodic poling for rubidium-exchanged waveguide structures. By combining material characterization with poling experiments, we provide deeper insights into the challenges of poling in such systems, including the influence of ionic conductivity, coercive field strength, and diffusion variations. These studies lay the foundation for improved control over the poling process and open pathways toward significantly enhanced fabrication technologies, paving the way for advances in integrated quantum optical devices.
- 8 May 2026
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 16 (11) , 3509
Comprehensive Analysis of Poling Dynamics in Rb-Doped KTP Waveguides
Integrated nonlinear optical devices enable the generation of tailored quantum states and highly efficient optical frequency converters. These devices rely on the combination of low-loss waveguides with periodic poling to achieve quasi-phase matching. Potassium titanyl phosphate (KTP) stands out as a prime material for integrated and quantum optical applications due to its favorable dispersion properties and high optical nonlinearities. However, the fabrication of periodically poled waveguides in KTP presents significant challenges, limiting its broader applicability. A profound understanding of the underlying material properties and mechanisms is essential to enhance the reproducible fabrication process and ensure reliability. In this paper, we investigate the poling dynamics and material behavior of locally rubidium-doped KTP with a focus on periodic poling for rubidium-exchanged waveguide structures. By combining material characterization with poling experiments, we provide deeper insights into the challenges of poling in such systems, including the influence of ionic conductivity, coercive field strength, and diffusion variations. These studies lay the foundation for improved control over the poling process and open pathways toward significantly enhanced fabrication technologies, paving the way for advances in integrated quantum optical devices.
- 1 April 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (13)
Photorefraction management in lithium niobate waveguides: High-temperature vs cryogenic solutions
Lithium niobate sees widespread use in nonlinear and quantum optical devices, such as for sum- and difference-frequency generation or spontaneous parametric downconversion. In lithium niobate waveguides, nonlinear optical processes are often limited by the so-called photorefractive effect, which limits the maximum input or output powers and impacts the nonlinear spectral response. Therefore, strategies for the management of photorefractive damage are a key consideration in device design. Usually, the photorefractive damage threshold, i.e., the maximal permissible operating power, can be increased by high-temperature operation of devices. This approach, however, is not applicable in cryogenic environments, which may be required for specialized applications. To better understand the impact of photorefraction in nonlinear optical applications, we study the impact of photorefraction on the phase-matching spectra of two nonlinear-optical sum-frequency generation experiments at (1) high temperatures and (2) cryogenic temperatures. Furthermore, we present an approach to reduce the impact of photorefraction, which is compatible with cryogenic operation. This comprises an auxiliary light source, propagating in the same waveguide, which is used to restore phase-matching spectra impacted by photorefraction, as well as reduce pyroelectric effects. Our work provides an alternative route to photorefraction management applicable to cryogenic environments, as well as in situations with tight energy budgets, such as space applications.
- 1 April 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (13)
Photorefraction management in lithium niobate waveguides: High-temperature vs cryogenic solutions
Lithium niobate sees widespread use in nonlinear and quantum optical devices, such as for sum- and difference-frequency generation or spontaneous parametric downconversion. In lithium niobate waveguides, nonlinear optical processes are often limited by the so-called photorefractive effect, which limits the maximum input or output powers and impacts the nonlinear spectral response. Therefore, strategies for the management of photorefractive damage are a key consideration in device design. Usually, the photorefractive damage threshold, i.e., the maximal permissible operating power, can be increased by high-temperature operation of devices. This approach, however, is not applicable in cryogenic environments, which may be required for specialized applications. To better understand the impact of photorefraction in nonlinear optical applications, we study the impact of photorefraction on the phase-matching spectra of two nonlinear-optical sum-frequency generation experiments at (1) high temperatures and (2) cryogenic temperatures. Furthermore, we present an approach to reduce the impact of photorefraction, which is compatible with cryogenic operation. This comprises an auxiliary light source, propagating in the same waveguide, which is used to restore phase-matching spectra impacted by photorefraction, as well as reduce pyroelectric effects. Our work provides an alternative route to photorefraction management applicable to cryogenic environments, as well as in situations with tight energy budgets, such as space applications.
- Open Access
- 10 March 2026
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 25 (3)
Toward integrated sensors for optimized optical coherence tomography with undetected photons
The development of practical sensors for optical coherence tomography (OCT) with undetected photons requires miniaturization via integration. To be practical, these sensors must exhibit a large spectral bandwidth and a high brightness, which are linked to a high axial resolution and a sufficient signal-to-noise ratio, respectively. Here, we combine these requirements in a scheme for OCT measurements with undetected photons based on nonlinear Ti : Li Nb O 3 waveguides. We investigate the performance benchmarks of the commonly used SU(1,1) scheme in comparison to an induced-coherence scheme and find that the latter is actually better suited when implementing measurements with undetected photons in integrated systems. In both schemes, we perform pump-gain optimization and OCT measurements with undetected photons with an axial resolution as low as 28 μ m .
- 10 March 2026
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 25 (3)
Open AccessToward integrated sensors for optimized optical coherence tomography with undetected photons
The development of practical sensors for optical coherence tomography (OCT) with undetected photons requires miniaturization via integration. To be practical, these sensors must exhibit a large spectral bandwidth and a high brightness, which are linked to a high axial resolution and a sufficient signal-to-noise ratio, respectively. Here, we combine these requirements in a scheme for OCT measurements with undetected photons based on nonlinear Ti : Li Nb O 3 waveguides. We investigate the performance benchmarks of the commonly used SU(1,1) scheme in comparison to an induced-coherence scheme and find that the latter is actually better suited when implementing measurements with undetected photons in integrated systems. In both schemes, we perform pump-gain optimization and OCT measurements with undetected photons with an axial resolution as low as 28 μ m .
- Open Access
- 8 December 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (25) , 52729-52743
Ultrabright, two-color photon pair source based on thin-film lithium niobate for bridging visible and telecom wavelengths
We present the design and characterization of a guided-wave, bright, and highly frequency non-degenerate parametric down-conversion (PDC) source in thin-film lithium niobate. The source generates photon pairs with wavelengths of 815 nm and 1550 nm, linking the visible wavelength regime with telecommunication wavelengths. We confirm the high quality of the generated single photons by determining a value for the heralded second-order correlation function as low as g h (2) (0)=(6.7±1.1)⋅10 −3 . Furthermore, we achieve a high spectral brightness of 0.44·10 7 pairss⋅mW⋅GHz which is two orders of magnitude higher than sources based on weakly guiding waveguides. The shape of the PDC spectrum and the strong agreement between the effective and nominal bandwidth highlight our high fabrication quality of periodically poled waveguides. The good agreement between the measured and simulated spectral characteristics of our source demonstrates our excellent understanding of the PDC process. Our result is a valuable step towards practical and scalable quantum communication networks as well as photonic quantum computing.
- 8 December 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (25) , 52729-52743
Open AccessUltrabright, two-color photon pair source based on thin-film lithium niobate for bridging visible and telecom wavelengths
We present the design and characterization of a guided-wave, bright, and highly frequency non-degenerate parametric down-conversion (PDC) source in thin-film lithium niobate. The source generates photon pairs with wavelengths of 815 nm and 1550 nm, linking the visible wavelength regime with telecommunication wavelengths. We confirm the high quality of the generated single photons by determining a value for the heralded second-order correlation function as low as g h (2) (0)=(6.7±1.1)⋅10 −3 . Furthermore, we achieve a high spectral brightness of 0.44·10 7 pairss⋅mW⋅GHz which is two orders of magnitude higher than sources based on weakly guiding waveguides. The shape of the PDC spectrum and the strong agreement between the effective and nominal bandwidth highlight our high fabrication quality of periodically poled waveguides. The good agreement between the measured and simulated spectral characteristics of our source demonstrates our excellent understanding of the PDC process. Our result is a valuable step towards practical and scalable quantum communication networks as well as photonic quantum computing.
- Open Access
- 1 December 2025
- Published by Wiley in Nanophotonics
- Vol. 14 (26) , 4761-4771
Segmented finger electrodes to optimize ultra‐long continuous wafer‐scale periodic poling in thin‐film lithium niobate
Periodically poled thin‐film lithium niobate (TFLN) crystals are the fundamental building block for highly‐efficient quantum light sources and frequency converters. The efficiency of these devices is strongly dependent on the interaction length between the light and the nonlinear material, scaling quadratically with this parameter. Nevertheless, the fabrication of long, continuously poled areas in TFLN remains challenging, the length of continuously poled areas rarely exceeds 10 mm. In this work, we demonstrate a significant progress in this field achieving the periodic poling of continuous poled areas of 70 mm length with a 3 μm poling period and a close to 50 % duty cycle. We compare two poling electrode design approaches to fabricate long, continuous poled areas. The first approach involves the poling of a single, continuous 70 mm long electrode. The second utilize a segmented approach including the poling of more than 20 individual sections forming together a 70 mm long poling area with no stitching errors. While the continuous electrode allows for faster fabrication, the segmented approach allows to individually optimize the poling resulting in less duty cycle variation. A detailed analysis of the periodic poling results reveals that the results of both are consistent with previously reported poling outcomes for shorter devices. Thus, we demonstrate wafer‐scale periodic poling exceeding chiplet‐size without any loss in the periodic poling quality. Our work presents a key step towards highly‐efficient, narrow‐bandwidth and low‐pump power nonlinear optical devices.
- 1 December 2025
- Published by Wiley in Nanophotonics
- Vol. 14 (26) , 4761-4771
Open AccessSegmented finger electrodes to optimize ultra‐long continuous wafer‐scale periodic poling in thin‐film lithium niobate
Periodically poled thin‐film lithium niobate (TFLN) crystals are the fundamental building block for highly‐efficient quantum light sources and frequency converters. The efficiency of these devices is strongly dependent on the interaction length between the light and the nonlinear material, scaling quadratically with this parameter. Nevertheless, the fabrication of long, continuously poled areas in TFLN remains challenging, the length of continuously poled areas rarely exceeds 10 mm. In this work, we demonstrate a significant progress in this field achieving the periodic poling of continuous poled areas of 70 mm length with a 3 μm poling period and a close to 50 % duty cycle. We compare two poling electrode design approaches to fabricate long, continuous poled areas. The first approach involves the poling of a single, continuous 70 mm long electrode. The second utilize a segmented approach including the poling of more than 20 individual sections forming together a 70 mm long poling area with no stitching errors. While the continuous electrode allows for faster fabrication, the segmented approach allows to individually optimize the poling resulting in less duty cycle variation. A detailed analysis of the periodic poling results reveals that the results of both are consistent with previously reported poling outcomes for shorter devices. Thus, we demonstrate wafer‐scale periodic poling exceeding chiplet‐size without any loss in the periodic poling quality. Our work presents a key step towards highly‐efficient, narrow‐bandwidth and low‐pump power nonlinear optical devices.
- Open Access
- 21 November 2025
- Published by Elsevier in Optics & Laser Technology
- Vol. 193
Photorefraction and in-situ optical cleaning in various types of LiNbO 3 waveguides
- 21 November 2025
- Published by Elsevier in Optics & Laser Technology
- Vol. 193
Open AccessPhotorefraction and in-situ optical cleaning in various types of LiNbO 3 waveguides
- Open Access
- 19 November 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (24) , 50451-50469
Widely non-degenerate nonlinear frequency conversion in cryogenic titanium in-diffused lithium niobate waveguides
The titanium in-diffused lithium niobate waveguide platform is well-established for reliable prototyping and packaging of many quantum photonic components at room temperature. Nevertheless, compatibility with certain quantum light sources and superconducting detectors requires operation under cryogenic conditions. We characterize alterations in phase-matching and mode guiding of a non-degenerate spontaneous parametric down-conversion process emitting around 1556 nm and 950 nm, under cryogenic conditions. Despite the effects of pyroelectricity and photorefraction, the spectral properties match our theoretical model. Nevertheless, these effects cause small but significant variations within and between cooling cycles. These measurements provide a first benchmark against which other nonlinear photonic integration platforms, such as thin-film lithium niobate, can be compared.
- 19 November 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (24) , 50451-50469
Open AccessWidely non-degenerate nonlinear frequency conversion in cryogenic titanium in-diffused lithium niobate waveguides
The titanium in-diffused lithium niobate waveguide platform is well-established for reliable prototyping and packaging of many quantum photonic components at room temperature. Nevertheless, compatibility with certain quantum light sources and superconducting detectors requires operation under cryogenic conditions. We characterize alterations in phase-matching and mode guiding of a non-degenerate spontaneous parametric down-conversion process emitting around 1556 nm and 950 nm, under cryogenic conditions. Despite the effects of pyroelectricity and photorefraction, the spectral properties match our theoretical model. Nevertheless, these effects cause small but significant variations within and between cooling cycles. These measurements provide a first benchmark against which other nonlinear photonic integration platforms, such as thin-film lithium niobate, can be compared.
- Open Access
Optimizing Ultra-Long Continuous Wafer-Scale Periodic Poling in Thin-Film Lithium Niobate
Periodically poled thin-film lithium niobate (TFLN) crystals are the fundamental building block for highly-efficient quantum light sources and frequency converters. The efficiency of these devices is strongly dependent on the interaction length between the light and the nonlinear material, scaling quadratically with this parameter. Nevertheless, the fabrication of long, continuously poled areas in TFLN remains challenging, the length of continuously poled areas rarely exceeds 10 mm. In this work, we demonstrate a significant progress in this field achieving the periodic poling of continuous poled areas of 70 mm length with a 3 microns poling period and a close to 50 % duty cycle. We compare two poling electrode design approaches to fabricate long, continuous poled areas. The first approach involves the poling of a single, continuous 70 mm long electrode. The second utilize a segmented approach including the poling of more than 20 individual sections forming together a 70 mm long poling area with no stitching errors. While the continuous electrode allows for faster fabrication, the segmented approach allows to individually optimize the poling resulting in less duty cycle variation. A detailed analysis of the periodic poling results reveals that the results of both are consistent with previously reported poling outcomes for shorter devices. Thus, we demonstrate wafer-scale periodic poling exceeding chiplet-size without any loss in the periodic poling quality. Our work presents a key step towards highly-efficient, narrowbandwidth and low-pump power nonlinear optical devices.
Open AccessOptimizing Ultra-Long Continuous Wafer-Scale Periodic Poling in Thin-Film Lithium Niobate
Periodically poled thin-film lithium niobate (TFLN) crystals are the fundamental building block for highly-efficient quantum light sources and frequency converters. The efficiency of these devices is strongly dependent on the interaction length between the light and the nonlinear material, scaling quadratically with this parameter. Nevertheless, the fabrication of long, continuously poled areas in TFLN remains challenging, the length of continuously poled areas rarely exceeds 10 mm. In this work, we demonstrate a significant progress in this field achieving the periodic poling of continuous poled areas of 70 mm length with a 3 microns poling period and a close to 50 % duty cycle. We compare two poling electrode design approaches to fabricate long, continuous poled areas. The first approach involves the poling of a single, continuous 70 mm long electrode. The second utilize a segmented approach including the poling of more than 20 individual sections forming together a 70 mm long poling area with no stitching errors. While the continuous electrode allows for faster fabrication, the segmented approach allows to individually optimize the poling resulting in less duty cycle variation. A detailed analysis of the periodic poling results reveals that the results of both are consistent with previously reported poling outcomes for shorter devices. Thus, we demonstrate wafer-scale periodic poling exceeding chiplet-size without any loss in the periodic poling quality. Our work presents a key step towards highly-efficient, narrowbandwidth and low-pump power nonlinear optical devices.
- Open Access
- 8 July 2025
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 9 (7)
Mg dopants in lithium niobate ( , LN): Defect models and impact on domain inversionThe optical and ferroelectric properties of lithium niobate ( LiNbO 3 , LN), including the orientation of the ferroelectric domains, i.e., the poling behavior, are decisively influenced by dopants. In this study, we apply density functional theory (DFT) to understand the microscopic origin of the beneficial (and impairing) effects of different Mg-doping concentrations, including nominally undoped stoichiometric and congruent compositions, particularly on the ferroelectric domain inversion. Mg Li + tends to be the dominant defect for lower doping concentrations, and a combination of Mg Li + and Mg Nb 3 − for intermediate doping concentrations. Single Mg Li defects are found to be a possible seed point for domain inversion, while the combination of Mg Li and Mg Nb defects is suggested to inhibit poling. In this case, the reaction pathways for the inversion are not symmetric and are characterized by different activation energies for each direction, which could promote the crystal to more easily revert to its original polarization.
- 8 July 2025
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 9 (7)
Open AccessMg dopants in lithium niobate ( , LN): Defect models and impact on domain inversionThe optical and ferroelectric properties of lithium niobate ( LiNbO 3 , LN), including the orientation of the ferroelectric domains, i.e., the poling behavior, are decisively influenced by dopants. In this study, we apply density functional theory (DFT) to understand the microscopic origin of the beneficial (and impairing) effects of different Mg-doping concentrations, including nominally undoped stoichiometric and congruent compositions, particularly on the ferroelectric domain inversion. Mg Li + tends to be the dominant defect for lower doping concentrations, and a combination of Mg Li + and Mg Nb 3 − for intermediate doping concentrations. Single Mg Li defects are found to be a possible seed point for domain inversion, while the combination of Mg Li and Mg Nb defects is suggested to inhibit poling. In this case, the reaction pathways for the inversion are not symmetric and are characterized by different activation energies for each direction, which could promote the crystal to more easily revert to its original polarization.