EAErik Aguirre

Erik Aguirre

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Erik Aguirre has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Electromagnetic Assessment of UHF-RFID Devices in Healthcare Environment

    by Victoria Ramos, Oscar J. Suárez, Samuel Suárez, Víctor M. Febles, Erik Aguirre, Patryk Zradziński, Luis E. Rabassa, Mikel Celaya-Echarri, Pablo Marina, Jolanta Karpowicz, et al.

    In this work, the evaluation of electromagnetic effect of Ultra High Frequency Radio Frequency Identification (UHF-RFID) passive tags used in the healthcare environment is presented. In order to evaluate exposure levels caused by EM field (865–868 MHz) of UHF-RFID readers, EM measurements in an anechoic chamber and in a real medical environment (Hospital Universitario de Canarias), as well as simulations by 3D Ray Launching algorithm, and of biophysical exposure effects in human models are presented. The results obtained show that the EM exposure is localized, in close vicinity of RFID reader and inversely proportional to its reading range. The EM exposure levels detected are sufficient to cause EM immunity effects in electronic devices (malfunctions in medical equipment or implants). Moreover, more than negligible direct effects in humans (exceeding relevant SAR values) were found only next to the reader, up to approximately 30% of the reading range. As a consequence, the EM risk could be firstly evaluated based on RFID parameters, but should include an in situ exposure assessment. It requires attention and additional studies, as increased applications of monitoring systems are observed in the healthcare sector—specifically when any system is located close to the workplace that is permanently occupied.


  • Open Access

    Radio Wave Propagation and WSN Deployment in Complex Utility Tunnel Environments

    by Mikel Celaya-Echarri, Leyre Azpilicueta, Peio Lopez-Iturri, Imanol Picallo, Erik Aguirre, Jose Javier Astrain, Jesús Villadangos, Francisco Falcone

    The significant growth of wireless communications systems in the last years has led to the adoption of a wide range of applications not only for the general public but, also, including utilities and administrative authorities. In this context, the notable expansion of new services for smart cities requires, in some specific cases, the construction of underground tunnels in order to enable the maintenance and operation works of utilities, as well as to reduce the visual impact within the city center. One of the main challenges is that, inherently, underground service tunnels lack coverage from exterior wireless communication systems, which can be potentially dangerous for maintenance personnel working within the tunnels. Accordingly, wireless coverage should be deployed within the underground installation in order to guarantee real-time connectivity for safety maintenance, remote surveillance or monitoring operations. In this work, wireless channel characterization for complex urban tunnel environments was analyzed based on the assessment of LoRaWAN and ZigBee technologies operating at 868 MHz. For that purpose, a real urban utility tunnel was modeled and simulated by means of an in-house three-dimensional ray-launching (3D-RL) code. The utility tunnel scenario is a complex and singular environment in terms of radio wave propagation due to the limited dimensions and metallic elements within it, such as service trays, user pathways or handrails, which were considered in the simulations. The simulated 3D-RL algorithm was calibrated and verified with experimental measurements, after which, the simulation and measurement results showed good agreement. Besides, a complete wireless sensor network (WSN) deployment within the tunnels was presented, providing remote cloud data access applications and services, allowing infrastructure security and safety work conditions. The obtained results provided an adequate radio planning approach for the deployment of wireless systems in complex urban utility scenarios, with optimal coverage and enhanced quality of service.


  • Open Access

    Fifth-Generation (5G) mmWave Spatial Channel Characterization for Urban Environments’ System Analysis

    by Leyre Azpilicueta, Peio Lopez-Iturri, Jaime Zuñiga-Mejia, Mikel Celaya-Echarri, Fidel Alejandro Rodríguez-Corbo, Cesar Vargas-Rosales, Erik Aguirre, David G. Michelson, Francisco Falcone

    In this work, the channel characterization in terms of large-scale propagation, small-scale propagation, statistical and interference analysis of Fifth-Generation (5G) Millimeter Wave (mmWave) bands for wireless networks for 28, 30 and 60 GHz is presented in both an outdoor urban complex scenario and an indoor scenario, in order to consider a multi-functional, large node-density 5G network operation. An in-house deterministic Three-Dimensional Ray-Launching (3D-RL) code has been used for that purpose, considering all the material properties of the obstacles within the scenario at the frequency under analysis, with the aid of purpose-specific implemented mmWave simulation modules. Different beamforming radiation patterns of the transmitter antenna have been considered, emulating a 5G system operation. Spatial interference analysis as well as time domain characteristics have been retrieved as a function of node location and configuration.


  • Open Access

    Wireless Channel Characterization and System Analysis of Complex Utility Tunnel Environments

    by Mikel Celaya-Echarri, Leyre Azpilicueta, Peio Lopez-Iturri, Imanol Picallo, Erik Aguirre, Jose Javier Astrain, Jesús Villadangos, Francisco Falcone

    The evolution of wireless communications has led to the adoption of a wide range of applications and utilities not only by the general public but also by administrative authorities. Consequently, the huge growth of new city services requires in some specific cases the construction of underground tunnels in order to reduce visual impact within the city center, as well as enabling the maintenance and operation works of utilities. One of the main challenges is that, inherently, underground service tunnels lack coverage from exterior wireless systems, such as mobile networks or municipal WLAN networks, which can be potentially dangerous for maintenance personnel working within the tunnels. In this work, wireless channel characterization for urban tunnel scenarios will be analyzed based on the assessment of LoRaWAN and ZigBee technologies operating at 868 MHz. For this purpose, a real urban utility tunnel has been modeled and simulated by means of an in-house 3D ray launching code and compared with experimental measurements, showing good agreement. The singularity and complexity of the limited tunnel dimensions and the inclusion of additional elements such as service trays, user pathways, and handrails have been considered. Results provide an adequate radio planning approach for the deployment of wireless systems in urban utility scenarios, with optimal coverage and enhanced quality of service. Besides, in order to have access to the data obtained by the potential WSN deployed within the tunnels, a solution to store such information in a cloud is included in the study.


  • Open Access

    A Radio Channel Model for D2D Communications Blocked by Single Trees in Forest Environments

    by Imanol Picallo, Hicham Klaina, Peio Lopez-Iturri, Erik Aguirre, Mikel Celaya-Echarri, Leyre Azpilicueta, Alejandro Eguizábal, Francisco Falcone, Ana Alejos

    In this paper we consider the D2D (Device-to-Device) communication taking place between Wireless Sensor Networks (WSN) elements operating in vegetation environments in order to achieve the radio channel characterization at 2.4 GHz, focusing on the radio links blocked by oak and pine trees modelled from specimens found in a real recreation area located within forest environments. In order to fit and validate a radio channel model for this type of scenarios, both measurements and simulations by means of an in-house developed 3D Ray Launching algorithm have been performed, offering as outcomes the path loss and multipath information of the scenarios under study for forest immersed isolated trees and non-isolated trees. The specific forests, composed of thick in-leaf trees, are called Orgi Forest and Chandebrito, located respectively in Navarre and Galicia, Spain. A geometrical and dielectric model of the trees were created and introduced in the simulation software. We concluded that the scattering produced by the tree can be divided into two zones with different dominant propagation mechanisms: an obstructed line of sight (OLoS) zone far from the tree fitting a log-distance model, and a diffraction zone around the edge of the tree. 2D planes of delay spread value are also presented which similarly reflects the proposed two-zone model.


  • Open Access

    Performance Evaluation and Interference Characterization of Wireless Sensor Networks for Complex High-Node Density Scenarios

    by Mikel Celaya-Echarri, Leyre Azpilicueta, Peio López-Iturri, Erik Aguirre, Francisco Falcone

    The uncontainable future development of smart regions, as a set of smart cities’ networks assembled, is directly associated with a growing demand of full interactive and connected ubiquitous smart environments. To achieve this global connection goal, large numbers of transceivers and multiple wireless systems will be involved to provide user services and applications anytime and anyplace, regardless the devices, networks, or systems they use. Adequate, efficient and effective radio wave propagation tools, methodologies, and analyses in complex indoor and outdoor environments are crucially required to prevent communication limitations such as coverage, capacity, speed, or channel interferences due to high-node density or channel restrictions. In this work, radio wave propagation characterization in an urban indoor and outdoor wireless sensor network environment has been assessed, at ISM 2.4 GHz and 5 GHz frequency bands. The selected scenario is an auditorium placed in an open free city area surrounded by inhomogeneous vegetation. User density within the scenario, in terms of inherent transceivers density, poses challenges in overall system operation, given by multiple node operation which increases overall interference levels. By means of an in-house developed 3D ray launching (3D-RL) algorithm with hybrid code operation, the impact of variable density wireless sensor network operation is presented, providing coverage/capacity estimations, interference estimation, device level performance and precise characterization of multipath propagation components in terms of received power levels and time domain characteristics. This analysis and the proposed simulation methodology, can lead in an adequate interference characterization extensible to a wide range of scenarios, considering conventional transceivers as well as wearables, which provide suitable information for the overall network performance in crowded indoor and outdoor complex heterogeneous environments.


  • Open Access

    Design and Experimental Validation of a LoRaWAN Fog Computing Based Architecture for IoT Enabled Smart Campus Applications

    by Paula Fraga-Lamas, Mikel Celaya-Echarri, Peio Lopez-Iturri, Luis Castedo, Leyre Azpilicueta, Erik Aguirre, Manuel Suárez-Albela, Francisco Falcone, Tiago M. Fernández-Caramés

    A smart campus is an intelligent infrastructure where smart sensors and actuators collaborate to collect information and interact with the machines, tools, and users of a university campus. As in a smart city, a smart campus represents a challenging scenario for Internet of Things (IoT) networks, especially in terms of cost, coverage, availability, latency, power consumption, and scalability. The technologies employed so far to cope with such a scenario are not yet able to manage simultaneously all the previously mentioned demanding requirements. Nevertheless, recent paradigms such as fog computing, which extends cloud computing to the edge of a network, make possible low-latency and location-aware IoT applications. Moreover, technologies such as Low-Power Wide-Area Networks (LPWANs) have emerged as a promising solution to provide low-cost and low-power consumption connectivity to nodes spread throughout a wide area. Specifically, the Long-Range Wide-Area Network (LoRaWAN) standard is one of the most recent developments, receiving attention both from industry and academia. In this article, the use of a LoRaWAN fog computing-based architecture is proposed for providing connectivity to IoT nodes deployed in a campus of the University of A Coruña (UDC), Spain. To validate the proposed system, the smart campus has been recreated realistically through an in-house developed 3D Ray-Launching radio-planning simulator that is able to take into consideration even small details, such as traffic lights, vehicles, people, buildings, urban furniture, or vegetation. The developed tool can provide accurate radio propagation estimations within the smart campus scenario in terms of coverage, capacity, and energy efficiency of the network. The results obtained with the planning simulator can then be compared with empirical measurements to assess the operating conditions and the system accuracy. Specifically, this article presents experiments that show the accurate results obtained by the planning simulator in the largest scenario ever built for it (a campus that covers an area of 26,000 m 2 ), which are corroborated with empirical measurements. Then, how the tool can be used to design the deployment of LoRaWAN infrastructure for three smart campus outdoor applications is explained: a mobility pattern detection system, a smart irrigation solution, and a smart traffic-monitoring deployment. Consequently, the presented results provide guidelines to smart campus designers and developers, and for easing LoRaWAN network deployment and research in other smart campuses and large environments such as smart cities.


  • Open Access

    Performance Evaluation and Interference Characterization of Wireless Sensor Networks for Complex High-Node Density Scenarios

    by Mikel Celaya-Echarri, Leyre Azpilicueta, Peio Lopez-Iturri, Erik Aguirre, Francisco Falcone

    The uncontainable future development of smart regions, as a set of smart cities’ assembled networks, is directly associated with a growing demand of full interactive and connected ubiquitous smart environments. To achieve this goal of global connection, a large number of transceivers and multiple wireless systems will be involved to provide user services and applications (i.e., Ambient Assisted Living, emergency situations, e-health monitoring, or Intelligent Transportation Systems) anytime and anyplace, regardless of the devices, networks, or systems used. Adequate, efficient, and effective radio wave propagation tools, methodologies, and analyses in complex environments (indoor and outdoor) are crucial to prevent communication limitations such as coverage, capacity, speed, or channel interferences due to nodes’ density or channel restrictions. In this work, radio wave propagation characterization in an urban indoor and outdoor environment, at ISM 2.4 GHZ and 5 GHz Wireless Sensor Networks (WSNs), has been assessed. The selected scenario is an auditorium placed in a free open area surrounded by inhomogeneous vegetation. User density within the scenario, in terms of inherent transceivers density, poses challenges to the overall system operation, given by multiple node operation which increases overall interference levels. By means of an in-house developed 3D ray launching algorithm, the impact of variable density wireless sensor network operation within this complex scenario is presented. This analysis and the proposed simulation methodology can lead in an adequate interference characterization, considering conventional transceivers as well as wearables, which provide suitable information for the overall network performance in complex crowded indoor and outdoor scenarios.

  • Open Access

    Radio Channel Characterization in Dense Forest Environments for IoT-5G

    by Peio Lopez-Iturri, Erik Aguirre, Mikel Celaya-Echarri, Leyre Azpilicueta, Alejandro Eguizábal, Francisco Falcone, Ana Alejos

    The attenuation due to vegetation can limit drastically the performance of Wireless Sensor Networks (WSN) and the Internet of Things (IoT) communication systems. Even more for the envisaged high data rates expected for the upcoming 5G mobile wireless communications. In this context, radio planning tasks become necessary in order to assess the validity of future WSN and IoT systems operating in vegetation environments. For that purpose, path loss models for scenarios with vegetation play a key role since they provide RF power estimations that allow an optimized design and performance of the wireless network. Although different propagation models for vegetation obstacles can be found in the literature, a model combining path loss and multipath propagation is rarely considered. In this contribution, we present the characterization of the radio channel for IoT and 5G systems working at 2.4 GHz, focusing on the radio links blocked by oak and pine trees modelled from specimens found in a real recreation area located within a dense forest environment. This specific forest, composed of thick in-leaf trees, is called Orgi Forest and it is situated in Navarre, Spain. In order to fit and validate a radio channel model for this type of scenarios, both measurements and simulations by means of an in-house developed 3D Ray Launching algorithm have been performed, offers as outcomes the path loss and multipath information of the scenario under study. A geometrical and dielectric model of the trees were created and introduced in the simulation software. The path loss was then estimated as dependent of the radio link range for two species of trees at 2.4 GHz. We concluded that the scattering produced by the tree can be divided into two zones with different dominant propagation mechanisms: a free-space zone far from the tree and a diffraction zone around the edge of the tree. 2D planes of delay spread value are also presented which similarly reflects the proposed two-zone model.


  • Open Access

    Integration of Autonomous Wireless Sensor Networks in Academic School Gardens

    by Peio Lopez-Iturri, Mikel Celaya-Echarri, Leyre Azpilicueta, Erik Aguirre, José J. Astrain, Jesús Villadangos, Francisco Falcone

    In this work, the combination of capabilities provided by Wireless Sensor Networks (WSN) with parameter observation in a school garden is employed in order to provide an environment for school garden integration as a complementary educational activity in primary schools. Wireless transceivers with energy harvesting capabilities are employed in order to provide autonomous system operation, combined with an ad-hoc implemented application called MySchoolGardenApp, based on a modular software architecture. The system enables direct parameter observation, data analysis and processing capabilities, which can be employed by students in a cloud based platform. Providing remote data access allows the adaptation of content to specific classroom/homework needs. The proposed monitoring WSN has been deployed in an orchard located in the schoolyard of a primary school, which has been built with EnOcean’s energy harvesting modules, providing an optimized node device as well network layout. For the assessment of the wireless link quality and the deployment of the modules, especially the central module which needs to receive directly the signals of all the sensor modules, simulation results obtained by an in-house developed 3D Ray Launching deterministic method have been used, providing coverage/capacity estimations applicable to the specific school environment case. Preliminary trials with MySchoolGardenApp have been performed, showing the feasibility of the proposed platform as an educational resource in schools, with application in specific natural science course content, development of technological skills and the extension of monitoring capabilities to new context-aware applications.