SYSeungho Yu

Seungho Yu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Seungho Yu has a total of 205 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Empirical Understanding of Li‐Ion Transport Through Hetero‐Grain Boundaries Within Li‐Electrolyte Interface for Stable Li Metal Anodes

    by Jung Been Park, Myeongcho Jang, Min Sang Kim, Kyeongtae Park, Changhoon Choi, Seungho Yu, Dong‐Wan Kim

    Understanding the Li‐ion transport mechanism across the Li/electrolyte interface (LEI) is fundamental for stabilizing Li‐metal batteries (LMBs). In particular, hetero‐grain boundaries (h‐GBs) such as Li 2 O/LiF or Li 2 CO 3 /LiF are theoretically recognized to provide favorable Li‐ion pathways within inorganic LEI; however, experimental verification of h‐GB‐mediated Li‐ion transport remains elusive. In this study, we provide experimental evidence for favorable Li‐ion transport associated with h‐GBs using a tailored h‐GB‐rich MgO/MgF 2 heterostructure (MgO/F). Multifaceted analyses indicate that the MgO/MgF 2 heterointerfaces establish a favorable Li‐ion transport environment through coupled interfacial effects, with the enhanced defect population potentially contributing to increased Li‐ion carrier availability. Furthermore, upon contact between the Li substrate and the MgO/F layer acting as the LEI, the MgO/F layer spontaneously constructs a dual‐interfacial architecture: an inorganic‐rich solid electrolyte interphase abundant in h‐GB‐rich Li 2 O/LiF and a Li/substrate interphase consisting of a Li–Mg alloy with rapid Li surface migration. This synergistic interfacial architecture maximizes the practical efficacy of h‐GB‐rich MgO/F for stabilizing Li metal anodes. Consequently, the h‐GB‐rich MgO/F demonstrates exceptional electrochemical stability, significantly outperforming bare Li in both symmetric and full cells. This study provides experimental insight into the role of h‐GBs in inorganic interfaces and provides a strategic blueprint for designing highly stable LMBs.

  • Open Access

    Regulating Oxygen‐Mediated Reconstruction during Cooling: A New Design Principle for High‐Capacity Sodium Manganese Oxide Cathodes

    by Seungmin Lee, Daseul Han, Jae‐Ho Park, Eunji Kwon, Elang Barruna, Sang Hyuk Gong, Mingony Kim, Yiseul Yoo, Seungho Yu, Kyung Yoon Chung, et al.

    Deciphering the synthetic origin of oxygen‐redox stability is critical to the design of high‐capacity sodium‐ion cathodes. Although prior studies have correlated electrochemical behavior with pre‐formed structural motifs, the pathways by which these motifs emerge during synthesis remain unclear. Here, we track the structural evolution of layered sodium manganese oxide during solid‐state synthesis using time‐resolved X‐ray diffraction coupled with a real‐time micro‐furnace. We show that oxygen uptake and Mn oxidation occur predominantly during cooling, triggering oxygen‐mediated reconstruction into a framework enriched with manganese vacancies (□Mn) and stacking faults. By kinetically regulating the cooling process, we reveal that slow cooling promotes a spatially homogeneous stacking‐fault‐rich architecture that suppresses in‐plane Mn migration and mitigates irreversible O 2 release. High‐resolution microscopy directly visualizes the development of stacking faults, while density functional theory shows that these defects substantially increase the barrier for Mn migration. Together, these findings identify cooling‐driven oxygen‐mediated reconstruction as a previously underappreciated synthetic lever for defect engineering and establish a general design principle for stabilizing oxygen redox in layered sodium cathodes.

  • Morphology-Diversified Sn Growth for Aqueous Acidic Batteries

    by Young-Hoon Lee, Geumbi Na, Eunji Kwon, Young Yong Kim, Dasol Yoon, Eunbin Park, Hosung Choi, David A. Muller, Seungho Yu, Yung-Eun Sung, et al.

    Aqueous acidic batteries utilizing corrosion-resistant Sn metal anodes have emerged as promising candidates for safe energy storage systems. However, uncontrolled dendritic growth under high-rate operation remains a major obstacle. Here we showed that artificial layers acting solely as a physical barrier are insufficient to regulate Sn deposition. We instead introduced an active-site-rich porous carbon (PC) layer with abundant N-defect sites that simultaneously governs the interfacial charge distribution and Sn nucleation. This architecture enabled highly uniform Sn deposition both within the PC layer and on the underlying substrate. Crucially, we identified the formation of an H3O+-enriched electric double layer in acidic electrolytes as the key factor driving Sn nanoparticle deposition within the carbon layer. Consequently, this artificial layer strategy significantly improved the reversibility and stability of Sn anodes, achieving a high average Coulombic efficiency of 99.72% for 16,000 cycles in asymmetric cells and maintaining 83.5% capacity retention after 20,000 cycles in pouch cells.

  • Phase-changeable ion-conducting fillers for sintering-free continuous Li+ conduction networks toward oxide-based all-solid-state batteries

    by Yiseul Yoo, Mingony Kim, Yongheum Lee, Hyori Na, Seungho Yu, Dongjin Byun, Kyung Yoon Chung, Hee-Dae Lim

  • Open Access

    Machine‐Learning Framework for Designing Stable Interfaces in All‐Solid‐State Lithium‐Ion Batteries

    by Sehyeok Park, Myeongcho Jang, Hun‐Gi Jung, Kyung Yoon Chung, Seungho Yu

    All‐solid‐state lithium‐ion batteries are promising next‐generation energy‐storage systems, but interfacial instability between cathodes and solid electrolytes remains a major barrier to long‐term durability. Interfacial coatings can mitigate these reactions, yet coating selection is limited by the vast chemical design space and incomplete database coverage. In this study, coating discovery is formulated as a prediction‐and‐design problem in which interfacial reaction energies define a composition‐to‐reactivity map that generalizes to unseen compounds. Reaction energies are calculated for 809 phase‐stable Li‐containing compounds from the Materials Project against 10 oxide cathodes and 7 sulfide solid electrolytes. Unsupervised clustering identifies distinct reactivity groups, and composition‐based analysis reveals signatures, including polyanion tolerance and fixed‐valence cations, that define a low‐reactivity design envelope. Using composition‐derived physicochemical descriptors, an ensemble regressor predicts pair‐averaged reaction energies for newly enumerated compositions. Within this envelope, charge‐balanced Li─M─O and Li─M─A─O compositions (A = B, P, Si) are enumerated, pre‐screened, and validated by phase‐diagram analysis. This workflow enables interpretable machine‐learning‐guided expansion beyond existing databases for scalable coating discovery.


  • Open Access

    Design principles for cation-disordered superionic thioantimonate argyrodite solid electrolytes

    by Kanguk Park, Myeongcho Jang, Eunji Kwon, Yongheum Lee, Hun-Gi Jung, Kyung Yoon Chung, Seung-Ho Yu, Seungho Yu


  • Open Access

    Interfacial Stability and Design Strategies for Halide Solid Electrolytes in High‐Voltage All‐Solid‐State Sodium‐Ion Batteries

    by Myeongcho Jang, Eunji Kwon, Chelin Jeon, Sooyeon Kim, Seungho Yu

    All‐solid‐state sodium‐ion batteries (ASSSIBs) based on halide solid electrolytes (HSEs) are emerging as promising systems for high energy density and stable energy storage. Although HSEs are generally regarded as compatible with high‐voltage oxide cathodes, their interfacial stability remains insufficiently understood. Here, we evaluate the interfacial chemical compatibility between representative HSEs and high‐voltage sodium cathode materials through mutual decomposition reaction energy calculations. The analysis reveals interfacial instability of HSEs against high voltage cathodes, challenging the prevailing assumption of their intrinsic stability and highlighting the need for targeted interface design. To address this issue, a high‐throughput computational screening of 12 800 sodium‐containing compounds was performed, identifying several coating materials that effectively suppress interfacial reaction driving forces. These coatings promote stable SE–cathode interfaces, ensuring chemical compatibility under high voltage operation. This study establishes a strategic framework for interfacial design that deepens the understanding of HSE stability and advances the development of durable, high‐energy ASSSIBs.


  • Fluorinated Halide Solid Electrolytes for High-Voltage All-Solid-State Sodium-Ion Batteries Enabling Reversible Oxygen Redox

    by Chelin Jeon, Yiseul Yoo, Eunji Kwon, Sang Hyuk Gong, Mingony Kim, Sang-Ok Kim, Hyung-Seok Kim, Hun-Gi Jung, Kyung Yoon Chung, Yoon Seok Jung, et al.


  • Hierarchically structured Co@Fe (SA) -MoO/MoP electrocatalyst with tuned electronic states for thermodynamically optimized hydrogen adsorption in chloride-rich media

    by Muhaiminul Islam, Jongwoo Hong, Kanguk Park, Amar M. Patil, Taehyeon Kim, Sushanta K. Das, Seungho Yu, Seong Chan Jun

    Fe (SA) -MoO/MoP heterojunctions on Co nanorods boost hydrogen production via d-band tuning, enhancing HER/OER with low overpotentials (57/290 mV) and high stability (95/97% after 40 h), showing excellent bifunctional durability for water splitting.


  • Rational materials design for stable interfaces in all-solid-state potassium-ion batteries

    by Sooyeon Kim, Myeongcho Jang, Seungho Yu

    Electrochemical stability of potassium solid electrolytes was evaluated, and high-throughput screening identified twelve coatings that suppress SE–cathode decomposition.