Ravi Shankar Sundaram
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Ravi Shankar Sundaram has a total of 149 co-authors. Here are the top co-authors by number of shared publications:
Klaus Kern
Max Planck Institute for Solid State Research, Heisenbergstrasse 1, D-70569 Stuttgart, Germany
8 shared publicationsMarko Burghard
Max-Planck-Institute for Solid State Research, 70569 Stuttgart, Germany
7 shared publicationsS. Milana
Cambridge Graphene Centre, University of Cambridge, CB3 0FA, UK
7 shared publicationsA. C. Ferrari
Cambridge Graphene Centre, University of Cambridge, CB3 0FA, UK
6 shared publications- Jong-Hyun Ahn
Yonsei University
5 shared publications Y. Lee
Yonsei Univ. (Korea, Republic of)
5 shared publications
Latest Publications
- 15 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (2) , 1-6
Superconducting NbN for Strong Magnetic Field Applications: Impact of the Thin Films Intrinsic Disorder
The research on superconducting circuits for quantum information technologies progressively extends from the academic world towards the industry. Material sciences therefore become an essential lever for the development of technologies based on such circuits as they allow finding industry-compatible routes of improvements. In this context, we propose a study on the behavior of the niobium nitride (NbN), one of the most commonly used material for these devices, when exposed to strong magnetic fields. To this aim, the properties of NbN layers with the same composition but different microstructures, tuned by changing the deposition method, are compared. This study aims to establish interdependencies between the microstructure of the material and its behavior once exposed to a magnetic field. X-ray diffraction and Hall-effect characterizations are used to assess that the microstructure is significantly modified by the choice of the deposition technique. Pushing further these investigations also allowed to quantify and compare the level of disorder in both cases by extracting the Ioffe-regel and the Ginzburg-Landau parameters from characterizations of the superconducting transition temperature for several magnetic field amplitudes. This was used to conclude that in highly disordered NbN layers, the microstructure heterogeneities are responsible for a strong electron localization allowing to significantly enhance the resilience of their superconducting state under strong magnetic fields.
- 15 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (2) , 1-6
Superconducting NbN for Strong Magnetic Field Applications: Impact of the Thin Films Intrinsic Disorder
The research on superconducting circuits for quantum information technologies progressively extends from the academic world towards the industry. Material sciences therefore become an essential lever for the development of technologies based on such circuits as they allow finding industry-compatible routes of improvements. In this context, we propose a study on the behavior of the niobium nitride (NbN), one of the most commonly used material for these devices, when exposed to strong magnetic fields. To this aim, the properties of NbN layers with the same composition but different microstructures, tuned by changing the deposition method, are compared. This study aims to establish interdependencies between the microstructure of the material and its behavior once exposed to a magnetic field. X-ray diffraction and Hall-effect characterizations are used to assess that the microstructure is significantly modified by the choice of the deposition technique. Pushing further these investigations also allowed to quantify and compare the level of disorder in both cases by extracting the Ioffe-regel and the Ginzburg-Landau parameters from characterizations of the superconducting transition temperature for several magnetic field amplitudes. This was used to conclude that in highly disordered NbN layers, the microstructure heterogeneities are responsible for a strong electron localization allowing to significantly enhance the resilience of their superconducting state under strong magnetic fields.
- Open Access
- 26 July 2021
- Published by Wiley in Advanced Materials Technologies
- Vol. 6 (11) , 2100489
Plasma‐Enhanced Atomic Layer Deposition of Al2O3 on Graphene Using Monolayer hBN as Interfacial Layer
The deposition of dielectric materials on graphene is one of the bottlenecks for unlocking the potential of graphene in electronic applications. The plasma enhanced atomic layer deposition of 10 nm thin high quality aluminum oxide (Al2O3) on graphene is demonstrated using a monolayer of hexagonal boron nitride (hBN) as protection layer. Raman spectroscopy is performed to analyze possible structural changes of the graphene lattice caused by the plasma deposition. The results show that a monolayer of hBN in combination with an optimized deposition process can effectively protect graphene from damage, while significant damage is observed without an hBN layer. Electrical characterization of double gated graphene field effect devices confirms that the graphene does not degrade during the plasma deposition of Al2O3. The leakage current densities are consistently below 1 pA µm−2 for electric fields across the insulators of up to 8 MV cm−1, with irreversible breakdown happening above. Such breakdown electric fields are typical for Al2O3 and can be seen as an indicator for high quality dielectric films.
- 26 July 2021
- Published by Wiley in Advanced Materials Technologies
- Vol. 6 (11) , 2100489
Open AccessPlasma‐Enhanced Atomic Layer Deposition of Al2O3 on Graphene Using Monolayer hBN as Interfacial Layer
The deposition of dielectric materials on graphene is one of the bottlenecks for unlocking the potential of graphene in electronic applications. The plasma enhanced atomic layer deposition of 10 nm thin high quality aluminum oxide (Al2O3) on graphene is demonstrated using a monolayer of hexagonal boron nitride (hBN) as protection layer. Raman spectroscopy is performed to analyze possible structural changes of the graphene lattice caused by the plasma deposition. The results show that a monolayer of hBN in combination with an optimized deposition process can effectively protect graphene from damage, while significant damage is observed without an hBN layer. Electrical characterization of double gated graphene field effect devices confirms that the graphene does not degrade during the plasma deposition of Al2O3. The leakage current densities are consistently below 1 pA µm−2 for electric fields across the insulators of up to 8 MV cm−1, with irreversible breakdown happening above. Such breakdown electric fields are typical for Al2O3 and can be seen as an indicator for high quality dielectric films.
- 10 October 2017
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 50 (44) , 440401
Preface for a special issue on 2D materials: growth, characterisation, properties and devices
- 10 October 2017
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 50 (44) , 440401
Preface for a special issue on 2D materials: growth, characterisation, properties and devices
- 5 April 2017
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 50 (18) , 184005
A Raman metrology approach to quality control of 2D MoS 2 film fabrication
Promising electronic and optoelectronic properties of two-dimensional (2D) materials have spurred research into large area fabrication through vapour deposition and etching. However, robust and efficient non destructive characterization techniques are required in order to reliably produce good quality uniform layers. Here, we present a Raman spectroscopy approach for characterization of the quality and a systematic study of the impact of process parameters for the production of 2D MoS 2 layers. We also present the application of this characterization technique for controlled layer by layer etching of multilayer MoS 2 .
- 5 April 2017
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 50 (18) , 184005
A Raman metrology approach to quality control of 2D MoS 2 film fabrication
Promising electronic and optoelectronic properties of two-dimensional (2D) materials have spurred research into large area fabrication through vapour deposition and etching. However, robust and efficient non destructive characterization techniques are required in order to reliably produce good quality uniform layers. Here, we present a Raman spectroscopy approach for characterization of the quality and a systematic study of the impact of process parameters for the production of 2D MoS 2 layers. We also present the application of this characterization technique for controlled layer by layer etching of multilayer MoS 2 .
- Open Access
- 30 September 2015
- Published by Korean Society of Electron Microscopy in Applied Microscopy
- Vol. 45 (3) , 131-134
Characterization of Two-Dimensional Transition Metal Dichalcogenides in the Scanning Electron Microscope Using Energy Dispersive X-ray Spectrometry, Electron Backscatter Diffraction, and Atomic Force Microscopy
Christian Lang, Matthew Hiscock, Kim Larsen, Jonathan Moffat, and Ravi Sundaram. AM 2015;45:131-4. http://dx.doi.org/10.9729/AM.2015.45.3.131
- 30 September 2015
- Published by Korean Society of Electron Microscopy in Applied Microscopy
- Vol. 45 (3) , 131-134
Open AccessCharacterization of Two-Dimensional Transition Metal Dichalcogenides in the Scanning Electron Microscope Using Energy Dispersive X-ray Spectrometry, Electron Backscatter Diffraction, and Atomic Force Microscopy
Christian Lang, Matthew Hiscock, Kim Larsen, Jonathan Moffat, and Ravi Sundaram. AM 2015;45:131-4. http://dx.doi.org/10.9729/AM.2015.45.3.131
- Open Access
- 22 June 2015
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 15 (7) , 4348-4355
Realization of Vertically Aligned, Ultrahigh Aspect Ratio InAsSb Nanowires on Graphite
The monolithic integration of InAs1–xSbx semiconductor nanowires on graphitic substrates holds enormous promise for cost-effective, high-performance, and flexible devices in optoelectronics and high-speed electronics. However, the growth of InAs1–xSbx nanowires with high aspect ratio essential for device applications is extremely challenging due to Sb-induced suppression of axial growth and enhancement in radial growth. We report the realization of high quality, vertically aligned, nontapered and ultrahigh aspect ratio InAs1–xSbx nanowires with Sb composition (xSb(%)) up to ∼12% grown by indium-droplet assisted molecular beam epitaxy on graphite substrate. Low temperature photoluminescence measurements show that the InAs1–xSbx nanowires exhibit bright band-to-band related emission with a distinct redshift as a function of Sb composition providing further confirmation of successful Sb incorporation in as-grown nanowires. This study reveals that the graphite substrate is a more favorable platform for InAs1–xSbx nanowires that could lead to hybrid heterostructures possessing potential device applications in optoelectronics.
- 22 June 2015
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 15 (7) , 4348-4355
Open AccessRealization of Vertically Aligned, Ultrahigh Aspect Ratio InAsSb Nanowires on Graphite
The monolithic integration of InAs1–xSbx semiconductor nanowires on graphitic substrates holds enormous promise for cost-effective, high-performance, and flexible devices in optoelectronics and high-speed electronics. However, the growth of InAs1–xSbx nanowires with high aspect ratio essential for device applications is extremely challenging due to Sb-induced suppression of axial growth and enhancement in radial growth. We report the realization of high quality, vertically aligned, nontapered and ultrahigh aspect ratio InAs1–xSbx nanowires with Sb composition (xSb(%)) up to ∼12% grown by indium-droplet assisted molecular beam epitaxy on graphite substrate. Low temperature photoluminescence measurements show that the InAs1–xSbx nanowires exhibit bright band-to-band related emission with a distinct redshift as a function of Sb composition providing further confirmation of successful Sb incorporation in as-grown nanowires. This study reveals that the graphite substrate is a more favorable platform for InAs1–xSbx nanowires that could lead to hybrid heterostructures possessing potential device applications in optoelectronics.
- 1 July 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Silicon photodetectors based on internal photoemission effect: The challenge of detecting near infrared light
In this paper an advance overview of our activity in the field of near-infrared silicon photodetectors, is presented. Proposed photodetectors are based on the internal photoemission effect through a Schottky junction and their fabrication results completely compatible with the silicon technology. Taking advantages by both new structures and new two-dimensional emerging materials a progressive increase in device performance has been demonstrated along the last years. Our insights show that silicon devices based on the internal photoemission effect are already suitable for power monitoring application and they could play a key role in the telecommunications opening new frontiers in the field of low-cost silicon photonic.
- 1 July 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Silicon photodetectors based on internal photoemission effect: The challenge of detecting near infrared light
In this paper an advance overview of our activity in the field of near-infrared silicon photodetectors, is presented. Proposed photodetectors are based on the internal photoemission effect through a Schottky junction and their fabrication results completely compatible with the silicon technology. Taking advantages by both new structures and new two-dimensional emerging materials a progressive increase in device performance has been demonstrated along the last years. Our insights show that silicon devices based on the internal photoemission effect are already suitable for power monitoring application and they could play a key role in the telecommunications opening new frontiers in the field of low-cost silicon photonic.
- 1 May 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
NIR silicon Schottky photodetector: From metal to graphene
In this work an advanced overview in the field of near-infrared silicon photodetectors, is presented. Proposed photodetectors are based on the internal photoemission effect through a Schottky junction and their fabrication results completely compatible with the silicon technology. Taking advantage of both new structures and new two-dimensional emerging materials, a progressive increase in device performance has been demonstrated along the last years. Our insights show that silicon devices based on the internal photoemission effect are already suitable for power monitoring applications and they could play a key role in the telecommunications opening new frontiers in the field of low-cost silicon photonics.
- 1 May 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
NIR silicon Schottky photodetector: From metal to graphene
In this work an advanced overview in the field of near-infrared silicon photodetectors, is presented. Proposed photodetectors are based on the internal photoemission effect through a Schottky junction and their fabrication results completely compatible with the silicon technology. Taking advantage of both new structures and new two-dimensional emerging materials, a progressive increase in device performance has been demonstrated along the last years. Our insights show that silicon devices based on the internal photoemission effect are already suitable for power monitoring applications and they could play a key role in the telecommunications opening new frontiers in the field of low-cost silicon photonics.
- 3 March 2014
- Published by SPIE-Intl Soc Optical Eng
- Vol. 8966, 89660X
Graphene saturable absorbers for VECSELs
We report mode-locking of an optically pumped VECSEL using a graphene-based saturable absorber mirror (GSAM). Self-starting and stable modelocked operation is demonstrated with 473 fs pulses at 1.5 GHz repetition rate and 949 nm center wavelength. Wavelength tuning is achieved over a 46 nm bandwidth. We discuss the mirror design, the fabrication of the GSAMs, and give an outlook on further optimization of the design, including dielectric top coatings to protect the graphene and to increase the flexibility in the design.
- 3 March 2014
- Published by SPIE-Intl Soc Optical Eng
- Vol. 8966, 89660X
Graphene saturable absorbers for VECSELs
We report mode-locking of an optically pumped VECSEL using a graphene-based saturable absorber mirror (GSAM). Self-starting and stable modelocked operation is demonstrated with 473 fs pulses at 1.5 GHz repetition rate and 949 nm center wavelength. Wavelength tuning is achieved over a 46 nm bandwidth. We discuss the mirror design, the fabrication of the GSAMs, and give an outlook on further optimization of the design, including dielectric top coatings to protect the graphene and to increase the flexibility in the design.
- 3 March 2014
- Published by SPIE-Intl Soc Optical Eng
- Vol. 8966, 896607
Graphene modelocked VECSELs
In the past decade, passively modelocked optically pumped vertical external cavity surface emitting lasers (OPVECSELs), sometimes referred to as semiconductor disk lasers (OP-SDLs), impressively demonstrated the potential for generating femtosecond pulses at multi-Watt average output powers with gigahertz repetition rates. Passive modelocking with a semiconductor saturable absorber mirror (SESAM) is well established and offers many advantages such as a flexible design of the parameters and low non-saturable losses. Recently, graphene has emerged as an attractive wavelength-independent alternative saturable absorber for passive modelocking in various lasers such as fiber or solid-state bulk lasers because of its unique optical properties. Here, we present and discuss the modelocked VECSELs using graphene saturable absorbers. The broadband absorption due to the linear dispersion of the Dirac electrons in graphene makes this absorber interesting for wavelength tunable ultrafast VECSELs. Such widely tunable modelocked sources are in particularly interesting for bio-medical imaging applications. We present a straightforward approach to design the optical properties of single layer graphene saturable absorber mirrors (GSAMs) suitable for passive modelocking of VECSELs. We demonstrate sub-500 fs pulses from a GSAM modelocked VECSEL. The potential for broadband wavelength tuning is confirmed by covering 46 nm in modelocked operation using three different VECSEL chips and up to 21 nm tuning in pulsed operation is achieved with one single gain chip. A linear and nonlinear optical characterization of different GSAMs with different absorption properties is discussed and can be compared to SESAMs.
- 3 March 2014
- Published by SPIE-Intl Soc Optical Eng
- Vol. 8966, 896607
Graphene modelocked VECSELs
In the past decade, passively modelocked optically pumped vertical external cavity surface emitting lasers (OPVECSELs), sometimes referred to as semiconductor disk lasers (OP-SDLs), impressively demonstrated the potential for generating femtosecond pulses at multi-Watt average output powers with gigahertz repetition rates. Passive modelocking with a semiconductor saturable absorber mirror (SESAM) is well established and offers many advantages such as a flexible design of the parameters and low non-saturable losses. Recently, graphene has emerged as an attractive wavelength-independent alternative saturable absorber for passive modelocking in various lasers such as fiber or solid-state bulk lasers because of its unique optical properties. Here, we present and discuss the modelocked VECSELs using graphene saturable absorbers. The broadband absorption due to the linear dispersion of the Dirac electrons in graphene makes this absorber interesting for wavelength tunable ultrafast VECSELs. Such widely tunable modelocked sources are in particularly interesting for bio-medical imaging applications. We present a straightforward approach to design the optical properties of single layer graphene saturable absorber mirrors (GSAMs) suitable for passive modelocking of VECSELs. We demonstrate sub-500 fs pulses from a GSAM modelocked VECSEL. The potential for broadband wavelength tuning is confirmed by covering 46 nm in modelocked operation using three different VECSEL chips and up to 21 nm tuning in pulsed operation is achieved with one single gain chip. A linear and nonlinear optical characterization of different GSAMs with different absorption properties is discussed and can be compared to SESAMs.