Olindo Isabella
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Olindo Isabella has a total of 424 co-authors. Here are the top co-authors by number of shared publications:
- Miro Zeman
Delft University of Technology Mekelweg 4 Delft 2628CD The Netherlands
79 shared publications Miro Zeman
22 shared publications- Paul Procel
Photovoltaic Materials and Devices Group Delft University of Technology Mekelweg 4 2628 CD Delft The Netherlands
21 shared publications - Guangtao Yang
Delft University of Technology Mekelweg 4 Delft 2628CD The Netherlands
20 shared publications - Hesan Ziar
Photovoltaic Materials and Devices Group, Department of Electrical Sustainable Energy, Faculty of Electrical Engineering, Mathematics, and Computer Science, Delft University of Technology, Delft, The Netherlands
13 shared publications - Patrizio Manganiello
Hasselt University, Hasselt, Belgium
13 shared publications
Latest Publications
- Open Access
System‐Level Performance and Techno‐Economic Assessment of Rooftop Four‐Terminal Tandem Photovoltaic Systems With Module‐Level Power Electronics Under Partial Shading
Tandem photovoltaic (PV) modules represent a promising pathway toward next‐generation high‐efficiency PV systems, with four‐terminal (4T) architectures offering enhanced design flexibility and a practical route toward commercialization. However, the system‐level integration of 4T tandem modules and their performance under partial shading (PS) remain insufficiently understood. This work presents a system‐level evaluation of 4T tandem PV systems under a range of rooftop shading conditions, comparing conventional bypass‐diode (BPD) protection with module‐level power electronics (MLPE) architectures in terms of mismatch mitigation, annual energy yield, and economic viability. Physics‐based simulations using the PVMD Toolbox, combined with real weather data, are employed to evaluate multiple MLPE architectures, including module‐ and submodule‐level granularity as well as full‐power‐processing (FPP) and differential‐power‐processing (DPP) architectures. The analysis considers annual energy yield together with levelized cost of electricity (LCOE) and net present value (NPV). Results show that under no‐shading and low‐shading conditions, the additional conversion losses and costs associated with MLPE outweigh their benefits. In contrast, under moderate and high shading conditions, MLPE, particularly at the submodule level, effectively mitigates mismatch losses, increasing annual energy yield by up to 20% relative to conventional BPD architecture while achieving the lowest LCOE and highest NPV. These results provide quantitative design guidelines for selecting MLPE granularity and power‐processing strategies for practical 4T tandem PV systems and identify the operating conditions under which active power electronics become beneficial.
Open AccessSystem‐Level Performance and Techno‐Economic Assessment of Rooftop Four‐Terminal Tandem Photovoltaic Systems With Module‐Level Power Electronics Under Partial Shading
Tandem photovoltaic (PV) modules represent a promising pathway toward next‐generation high‐efficiency PV systems, with four‐terminal (4T) architectures offering enhanced design flexibility and a practical route toward commercialization. However, the system‐level integration of 4T tandem modules and their performance under partial shading (PS) remain insufficiently understood. This work presents a system‐level evaluation of 4T tandem PV systems under a range of rooftop shading conditions, comparing conventional bypass‐diode (BPD) protection with module‐level power electronics (MLPE) architectures in terms of mismatch mitigation, annual energy yield, and economic viability. Physics‐based simulations using the PVMD Toolbox, combined with real weather data, are employed to evaluate multiple MLPE architectures, including module‐ and submodule‐level granularity as well as full‐power‐processing (FPP) and differential‐power‐processing (DPP) architectures. The analysis considers annual energy yield together with levelized cost of electricity (LCOE) and net present value (NPV). Results show that under no‐shading and low‐shading conditions, the additional conversion losses and costs associated with MLPE outweigh their benefits. In contrast, under moderate and high shading conditions, MLPE, particularly at the submodule level, effectively mitigates mismatch losses, increasing annual energy yield by up to 20% relative to conventional BPD architecture while achieving the lowest LCOE and highest NPV. These results provide quantitative design guidelines for selecting MLPE granularity and power‐processing strategies for practical 4T tandem PV systems and identify the operating conditions under which active power electronics become beneficial.
- Open Access
- 8 October 2026
- Published by Elsevier in SSRN Electronic Journal
Optical Characterization of Dielectric Liquids for Liquid-Encapsulated Photovoltaic Modules
Photovoltaic (PV) modules based on liquid encapsulation have recently emerged as highly efficient devices which are circular by design. However, accurate optical modelling of such innovative PV modules is hindered by a significant lack of reliable complex refractive index (𝑛 and 𝑘) data for liquid encapsulants. This study addresses this knowledge gap by performing optical characterization of seven liquids across the wavelength range of 300-1200 nm. A hybrid experimental methodology is developed to ensure high measurement accuracy: spectroscopic ellipsometry with active pneumatic isolators is utilized to determine the refractive index (𝑛), while a double optical path length transmission method is employed to ascertain the extinction coefficient (𝑘). This work provides the first reported 𝑛 and 𝑘 data of dielectric fluids, such as the MIVOLT, the MIDEL, the SP glycol, and the Shell Diala, which are used in several applications beyond PV. The methodology is validated against established literature for water, glycerol, and silicone oil. Finally, the measured 𝑛 and 𝑘 datasets are used in optical simulations of a liquid-encapsulated photovoltaic (LEPV) module with tunnel oxide passivated contact (TOPCon) solar cells. The results demonstrate that most LEPV modules match the optical performance of traditional EVAencapsulated modules. These findings provide a robust method for measuring the complex refractive index of dielectric liquids and an optical basis for the design of efficient LEPV modules.
- 8 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessOptical Characterization of Dielectric Liquids for Liquid-Encapsulated Photovoltaic Modules
Photovoltaic (PV) modules based on liquid encapsulation have recently emerged as highly efficient devices which are circular by design. However, accurate optical modelling of such innovative PV modules is hindered by a significant lack of reliable complex refractive index (𝑛 and 𝑘) data for liquid encapsulants. This study addresses this knowledge gap by performing optical characterization of seven liquids across the wavelength range of 300-1200 nm. A hybrid experimental methodology is developed to ensure high measurement accuracy: spectroscopic ellipsometry with active pneumatic isolators is utilized to determine the refractive index (𝑛), while a double optical path length transmission method is employed to ascertain the extinction coefficient (𝑘). This work provides the first reported 𝑛 and 𝑘 data of dielectric fluids, such as the MIVOLT, the MIDEL, the SP glycol, and the Shell Diala, which are used in several applications beyond PV. The methodology is validated against established literature for water, glycerol, and silicone oil. Finally, the measured 𝑛 and 𝑘 datasets are used in optical simulations of a liquid-encapsulated photovoltaic (LEPV) module with tunnel oxide passivated contact (TOPCon) solar cells. The results demonstrate that most LEPV modules match the optical performance of traditional EVAencapsulated modules. These findings provide a robust method for measuring the complex refractive index of dielectric liquids and an optical basis for the design of efficient LEPV modules.
- Open Access
- 14 September 2026
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 308
Studying and optimization of TCO/metal/TCO multi-layers for large area c-Si solar cells
- 14 September 2026
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 308
Open AccessStudying and optimization of TCO/metal/TCO multi-layers for large area c-Si solar cells
- Open Access
- 25 August 2026
- Published by Wiley in Small Science
- Vol. 6 (8) , e70329
Luminescent Imaging of the Reverse Bias Behavior of Perovskite Solar Cells Using ReBEL
Partial shading remains a critical challenge for perovskite photovoltaics, as shaded cells in otherwise illuminated modules operate in reverse bias, which can accelerate degradation. In other solar cell technologies, reverse bias electroluminescence (ReBEL) imaging has been successfully employed to investigate the reverse bias breakdown mechanism. Here, ReBEL imaging is proposed as technique for imaging the local reverse bias current flow on perovskite solar cells. To that end, the ReBEL signal is affirmed to originate from radiative recombination in the absorber layer. ReBEL imaging is compared to established thermal current imaging techniques and reveals superior sensitivity and spatial resolution while showing similar features in the investigated samples. Further experiments reveal a dependence on the reverse bias current: The spatial distribution of the ReBEL signal differs significantly between small and large current injection levels. This could point towards two different breakdown mechanisms. These results show that, despite some open questions, ReBEL imaging could help understand the reverse bias behavior of perovskite solar cells better.
- 25 August 2026
- Published by Wiley in Small Science
- Vol. 6 (8) , e70329
Open AccessLuminescent Imaging of the Reverse Bias Behavior of Perovskite Solar Cells Using ReBEL
Partial shading remains a critical challenge for perovskite photovoltaics, as shaded cells in otherwise illuminated modules operate in reverse bias, which can accelerate degradation. In other solar cell technologies, reverse bias electroluminescence (ReBEL) imaging has been successfully employed to investigate the reverse bias breakdown mechanism. Here, ReBEL imaging is proposed as technique for imaging the local reverse bias current flow on perovskite solar cells. To that end, the ReBEL signal is affirmed to originate from radiative recombination in the absorber layer. ReBEL imaging is compared to established thermal current imaging techniques and reveals superior sensitivity and spatial resolution while showing similar features in the investigated samples. Further experiments reveal a dependence on the reverse bias current: The spatial distribution of the ReBEL signal differs significantly between small and large current injection levels. This could point towards two different breakdown mechanisms. These results show that, despite some open questions, ReBEL imaging could help understand the reverse bias behavior of perovskite solar cells better.
- Open Access
- 4 May 2026
- Published by Wiley in Advanced Theory and Simulations
- Vol. 9 (5)
Improving the Comprehensive Modeling Framework for Energy Yield Simulations of Various Novel Photovoltaic Systems
Advanced and emerging photovoltaic (PV) technologies play a crucial role in meeting the increasing global energy demand sustainably. Simulations are essential for predicting system behavior and improving our understanding of complex PV architectures. This work extends an existing modeling framework designed for novel PV systems, offering a modular and flexible workflow suitable for diverse research applications. The framework computes PV performance from first‐principles physics, removing the need for module datasheets. It comprises two pre‐processing steps and six simulation steps. The first steps determine the optical behavior of the modules, followed by irradiance modeling and temperature calculations. The final steps evaluate the electrical characteristics and the conversion to alternating current at the full‐system level. The framework incorporates detailed energy loss analysis and includes advanced features such as partial shading, reverse‐bias effects, and photon recycling. Two applications demonstrate its capabilities: comparing module configurations in urban settings and optimizing multi‐junction PV system design. Results show that Smart modules enhance shade resilience, delivering approximately higher energy yields. Additionally, the optimal perovskite bandgap for perovskite/silicon tandem devices is found to be 1.60–1.62 eV. These outcomes highlight the framework's value for future PV system research and development. The developed software can be found at: https://github.com/YBlom1999/PVMD_Toolbox .
- 4 May 2026
- Published by Wiley in Advanced Theory and Simulations
- Vol. 9 (5)
Open AccessImproving the Comprehensive Modeling Framework for Energy Yield Simulations of Various Novel Photovoltaic Systems
Advanced and emerging photovoltaic (PV) technologies play a crucial role in meeting the increasing global energy demand sustainably. Simulations are essential for predicting system behavior and improving our understanding of complex PV architectures. This work extends an existing modeling framework designed for novel PV systems, offering a modular and flexible workflow suitable for diverse research applications. The framework computes PV performance from first‐principles physics, removing the need for module datasheets. It comprises two pre‐processing steps and six simulation steps. The first steps determine the optical behavior of the modules, followed by irradiance modeling and temperature calculations. The final steps evaluate the electrical characteristics and the conversion to alternating current at the full‐system level. The framework incorporates detailed energy loss analysis and includes advanced features such as partial shading, reverse‐bias effects, and photon recycling. Two applications demonstrate its capabilities: comparing module configurations in urban settings and optimizing multi‐junction PV system design. Results show that Smart modules enhance shade resilience, delivering approximately higher energy yields. Additionally, the optimal perovskite bandgap for perovskite/silicon tandem devices is found to be 1.60–1.62 eV. These outcomes highlight the framework's value for future PV system research and development. The developed software can be found at: https://github.com/YBlom1999/PVMD_Toolbox .
- Open Access
- 14 March 2026
- Published by Elsevier in SSRN Electronic Journal
Modelling the Heat and Mass Transfer in Agrivoltaic Orchards: A tool to estimate temperature distribution
As global land competition intensifies, agrivoltaic (agri-PV) systems offer a promising strategy to meet food, energy, and living demands. Yet, the thermal interactions between crop microclimates and photovoltaic (PV) module performance remain insufficiently understood. This study addresses that gap by modeling the influence of crop evapotranspiration (ET) on agri-PV thermal dynamics. (1) A detailed heat and mass transfer (HMT) model was developed to simulate the operating temperature of semi-transparent bifacial PV modules and the surrounding microclimate under open-field agri-PV conditions. The model accounts for all relevant heat fluxes governing PV module temperature, explicitly incorporating the effects of crop-driven latent and sensible heat fluxes. Its core components include a dual crop-coefficient evapotranspiration scheme, a coupled canopy–soil surface energy balance solver, and a multilayer ground heat-diffusion model. Validated against experimental data, the model reliably captures daily and seasonal trends. (2) Sensitivity analysis demonstrated that orchard ET can significantly influence PV module temperatures by altering the HMT beneath the modules, particularly under high radiation, low wind speed, and large-scale deployment. In a marine temperate climate, agri-PV implementation produced a smoothing effect: summer soil surface temperatures stabilized around 17ºC, while winter microclimate temperatures increased by 0.42ºC on the coldest day. (3) By resolving the impact of crops within agri-PV configurations on microclimate conditions and module performance, the fully parameterized model provides a robust tool for optimizing agri-PV design and advancing understanding of the food–energy–water nexus.
- 14 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessModelling the Heat and Mass Transfer in Agrivoltaic Orchards: A tool to estimate temperature distribution
As global land competition intensifies, agrivoltaic (agri-PV) systems offer a promising strategy to meet food, energy, and living demands. Yet, the thermal interactions between crop microclimates and photovoltaic (PV) module performance remain insufficiently understood. This study addresses that gap by modeling the influence of crop evapotranspiration (ET) on agri-PV thermal dynamics. (1) A detailed heat and mass transfer (HMT) model was developed to simulate the operating temperature of semi-transparent bifacial PV modules and the surrounding microclimate under open-field agri-PV conditions. The model accounts for all relevant heat fluxes governing PV module temperature, explicitly incorporating the effects of crop-driven latent and sensible heat fluxes. Its core components include a dual crop-coefficient evapotranspiration scheme, a coupled canopy–soil surface energy balance solver, and a multilayer ground heat-diffusion model. Validated against experimental data, the model reliably captures daily and seasonal trends. (2) Sensitivity analysis demonstrated that orchard ET can significantly influence PV module temperatures by altering the HMT beneath the modules, particularly under high radiation, low wind speed, and large-scale deployment. In a marine temperate climate, agri-PV implementation produced a smoothing effect: summer soil surface temperatures stabilized around 17ºC, while winter microclimate temperatures increased by 0.42ºC on the coldest day. (3) By resolving the impact of crops within agri-PV configurations on microclimate conditions and module performance, the fully parameterized model provides a robust tool for optimizing agri-PV design and advancing understanding of the food–energy–water nexus.
- Open Access
- 6 March 2026
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 8 (1) , 015028
Unravelling composition and mass-loading effects in monolithic non-stoichiometric silicon nitride anodes for lithium-ion batteries
Silicon is a promising alternative to the conventional graphite anodes due to its high theoretical capacity and favorable lithiation potential for lithium-ion batteries (LIBs) with liquid as well as solid-state electrolytes. However, lithiation-induced extreme volume change causes severe mechanochemical deformation and continuous formation of solid-electrolyte interphase leads to cell failure. One of the strategies to mitigate this problem is alloying silicon with a suitable element that can alter the surface electrochemistry and/or lithiation pathways, and acts as mechanical buffer. Nonetheless, these benefits come with a compromise on the specific capacity, which strongly influences the mass loading of the electrodes, highlighting the need to deconvolute the intertwined influence of composition and mass loading when designing high performance electrodes. In this work, we systematically studied the influence of composition and mass loading in monolithic amorphous silicon and non-stoichiometric silicon nitride (SiN x ) electrodes on their electrochemical performance as LIB anodes. The incorporation of nitrogen in the electrode matrix clearly improves the electrochemical stability at the expense of reduced specific capacity, while higher mass loading accelerates capacity fading, most critically in amorphous silicon electrodes. Postmortem analysis reveals that such capacity fading in the electrodes with higher mass loading can be related to delamination due to evolved tensile stress during the charge–discharge cycle. Yet, nitrogen-rich SiN x monolithic electrodes accommodate strain more effectively. These findings demonstrate that while pristine Si delivers high specific capacity and long-term stability in thin films, thicker (>1 µ m) monolithic electrodes benefit from higher nitrogen content in SiN x , which provides more stable cycling and sustained capacity.
- 6 March 2026
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 8 (1) , 015028
Open AccessUnravelling composition and mass-loading effects in monolithic non-stoichiometric silicon nitride anodes for lithium-ion batteries
Silicon is a promising alternative to the conventional graphite anodes due to its high theoretical capacity and favorable lithiation potential for lithium-ion batteries (LIBs) with liquid as well as solid-state electrolytes. However, lithiation-induced extreme volume change causes severe mechanochemical deformation and continuous formation of solid-electrolyte interphase leads to cell failure. One of the strategies to mitigate this problem is alloying silicon with a suitable element that can alter the surface electrochemistry and/or lithiation pathways, and acts as mechanical buffer. Nonetheless, these benefits come with a compromise on the specific capacity, which strongly influences the mass loading of the electrodes, highlighting the need to deconvolute the intertwined influence of composition and mass loading when designing high performance electrodes. In this work, we systematically studied the influence of composition and mass loading in monolithic amorphous silicon and non-stoichiometric silicon nitride (SiN x ) electrodes on their electrochemical performance as LIB anodes. The incorporation of nitrogen in the electrode matrix clearly improves the electrochemical stability at the expense of reduced specific capacity, while higher mass loading accelerates capacity fading, most critically in amorphous silicon electrodes. Postmortem analysis reveals that such capacity fading in the electrodes with higher mass loading can be related to delamination due to evolved tensile stress during the charge–discharge cycle. Yet, nitrogen-rich SiN x monolithic electrodes accommodate strain more effectively. These findings demonstrate that while pristine Si delivers high specific capacity and long-term stability in thin films, thicker (>1 µ m) monolithic electrodes benefit from higher nitrogen content in SiN x , which provides more stable cycling and sustained capacity.
- Open Access
- 13 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Industrial Electronics Society
- Vol. 7, 442-453
Integration of Battery Into Photovoltaic to Virtual Bus Parallel Differential Power Processing Architecture
This paper introduces a Parallel Differential Power Processing (PDPP) architecture for Photovoltaic (PV)/Battery applications. The PV to Virtual Bus (PV2VB) architecture enables the integration of a battery and manages its power while performing Maximum Power Point Tracking (MPPT) on the PV strings. In the proposed PV2VB PDPP architecture, the battery is positioned at the virtual bus, acting as the input for all string-level converters (SLCs). By selecting a lower voltage for the battery at the virtual bus compared to the PV string or the main bus voltages, component voltage ratings can be reduced. The architecture employs Dual Active Bridge converters connected to Bridgeless converters as SLCs to generate both positive and negative output voltages while providing isolation. These SLCs track the maximum power point (MPP) of each PV string, while the central converter manages battery charging and discharging. Experimental results confirm the performance and effectiveness of the proposed PV2VB PDPP architecture, achieving efficiencies between 95.5% and 99%.
- 13 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Industrial Electronics Society
- Vol. 7, 442-453
Open AccessIntegration of Battery Into Photovoltaic to Virtual Bus Parallel Differential Power Processing Architecture
This paper introduces a Parallel Differential Power Processing (PDPP) architecture for Photovoltaic (PV)/Battery applications. The PV to Virtual Bus (PV2VB) architecture enables the integration of a battery and manages its power while performing Maximum Power Point Tracking (MPPT) on the PV strings. In the proposed PV2VB PDPP architecture, the battery is positioned at the virtual bus, acting as the input for all string-level converters (SLCs). By selecting a lower voltage for the battery at the virtual bus compared to the PV string or the main bus voltages, component voltage ratings can be reduced. The architecture employs Dual Active Bridge converters connected to Bridgeless converters as SLCs to generate both positive and negative output voltages while providing isolation. These SLCs track the maximum power point (MPP) of each PV string, while the central converter manages battery charging and discharging. Experimental results confirm the performance and effectiveness of the proposed PV2VB PDPP architecture, achieving efficiencies between 95.5% and 99%.
Determining the Reverse Bias Breakdown Voltage of Perovskite Solar Cells
The degradation of perovskite solar cells due to reverse bias (RB) is one of the remaining challenges hindering the commercialization of the technology. To overcome this challenge, a thorough understanding of and control over the breakdown (BD) voltage are crucial. A prerequisite for this is that the community “speaks the same language,” that is, that the reported BD voltages are comparable. A review of literature data shows that the impact of measurement parameters is often unknown and seems to depend strongly on sample properties. It follows that standardization is the only way to reach comparability. Here, a set of measurement parameters to fill this gap is proposed. Additionally, various definitions of a “BD voltage” are used in parallel without any way of relating them to each other; this metric and its determination need to be considered as well. After a thorough discussion of the available definitions, the use of the point of maximum curvature is introduced. Its main advantage is the possible connection to an analytical description of the BD mechanism. In this way, a starting point for scientists new to the field of RB stability is provided, and the ground for a broader discussion in the community is prepared.
Determining the Reverse Bias Breakdown Voltage of Perovskite Solar Cells
The degradation of perovskite solar cells due to reverse bias (RB) is one of the remaining challenges hindering the commercialization of the technology. To overcome this challenge, a thorough understanding of and control over the breakdown (BD) voltage are crucial. A prerequisite for this is that the community “speaks the same language,” that is, that the reported BD voltages are comparable. A review of literature data shows that the impact of measurement parameters is often unknown and seems to depend strongly on sample properties. It follows that standardization is the only way to reach comparability. Here, a set of measurement parameters to fill this gap is proposed. Additionally, various definitions of a “BD voltage” are used in parallel without any way of relating them to each other; this metric and its determination need to be considered as well. After a thorough discussion of the available definitions, the use of the point of maximum curvature is introduced. Its main advantage is the possible connection to an analytical description of the BD mechanism. In this way, a starting point for scientists new to the field of RB stability is provided, and the ground for a broader discussion in the community is prepared.