Cheng-Tsung Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Cheng-Tsung Liu has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
Sheng-Yang Lin
Green Energy and System Integration R&D Department, China Steel Corporation, Kaohsiung, Taiwan
9 shared publicationsPei-Chun Shih
Research and Development Center, Nidec Taiwan Corporation, Tainan, Taiwan
6 shared publicationsYu-Wei Hsu
Research and Development Center, Nidec Taiwan Corporation, Tainan, Taiwan
6 shared publicationsChang-Chou Hwang
Department of Electrical Engineering, Feng Chia University, Taichung, Taiwan
5 shared publicationsHsin-Nan Lin
Research and Development Center, Nidec Taiwan Corporation, Tainan, Taiwan
5 shared publicationsSheng-Chan Yen
Research and Development Center, Nidec Taiwan Corporation, Tainan, Taiwan
5 shared publications
Latest Publications
- 13 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 60 (2) , 2756-2763
A Convenient Analytical Model for Predicting Direct-on-Line Synchronous Reluctance Motor Operations at Different Environments
To meet the driven objectives in the metals industry with relatively severe operational environments, the induction motor is generally adopted due to its rigid structure. However, for energy conservation and environmental concerns, some globally enforced regulations have complicated the design and increased the cost of developing high-efficiency induction motors. Because the direct-on-line synchronous reluctance motor (DOL_SynRM) has a comparably robust structure with almost no rotor copper loss, it has become a potential alternative for accomplishing the desired high-efficiency operational objectives. For investigating the line-start capabilities and operational impacts of different DOL_SynRM designs for specific equipment with reasonably good performance predictions, a convenient analytical model is proposed. Supported by the results from both finite-element analyses and experimental measurements, the suitability of the proposed model can thus be confirmed.
- 13 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 60 (2) , 2756-2763
A Convenient Analytical Model for Predicting Direct-on-Line Synchronous Reluctance Motor Operations at Different Environments
To meet the driven objectives in the metals industry with relatively severe operational environments, the induction motor is generally adopted due to its rigid structure. However, for energy conservation and environmental concerns, some globally enforced regulations have complicated the design and increased the cost of developing high-efficiency induction motors. Because the direct-on-line synchronous reluctance motor (DOL_SynRM) has a comparably robust structure with almost no rotor copper loss, it has become a potential alternative for accomplishing the desired high-efficiency operational objectives. For investigating the line-start capabilities and operational impacts of different DOL_SynRM designs for specific equipment with reasonably good performance predictions, a convenient analytical model is proposed. Supported by the results from both finite-element analyses and experimental measurements, the suitability of the proposed model can thus be confirmed.
- 23 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 59 (11) , 1-5
Winding Magnetization Design of Single-Phase Capacitor-Run Induction Motor for Submersible Pump Application
This paper provides a systematic stator winding design scheme that can effectively improve the operational efficiency of commercial single-phase capacitor-run induction motors. Without changing the circuit components and structural constraints, the motor’s stator windings will be rearranged based on the devised theoretical basis and design objectives. The design scheme supported by the finite-element emulations will be supplied to show the efficiency improvement of a commercial single-phase 2-pole induction motor. In addition, experimental hardware validations will be accomplished from the motor with rewound stators, and evident performance advances from measurements confirm the design.
- 23 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 59 (11) , 1-5
Winding Magnetization Design of Single-Phase Capacitor-Run Induction Motor for Submersible Pump Application
This paper provides a systematic stator winding design scheme that can effectively improve the operational efficiency of commercial single-phase capacitor-run induction motors. Without changing the circuit components and structural constraints, the motor’s stator windings will be rearranged based on the devised theoretical basis and design objectives. The design scheme supported by the finite-element emulations will be supplied to show the efficiency improvement of a commercial single-phase 2-pole induction motor. In addition, experimental hardware validations will be accomplished from the motor with rewound stators, and evident performance advances from measurements confirm the design.
- 5 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (4) , 5503-5509
Cost-Effective Assessment of Surface-Mounted Permanent-Magnet Motors for Refrigerant Compressor Applications Used in High-Temperature Environments
With the introduction of stricter energy-efficiency-ratio regulations, the surface-mounted permanent-magnet motor (SPM) is gaining increasing attention due to its inherent high-power density. This article investigates the feasible SPM structures for refrigerant compressor applications, particularly those used in metal industry factories with high surrounding temperatures so that cost-effective solutions can be achieved. A theoretical model is first established to aid structural parameter optimizations and the management of specific operational objectives and constraints; multiple SPM arrangements are investigates, with ease of manufacturing implementation being one consideration, as shown in Liu et al. , 2021. Detailed finite element calculations and experimental measurements are performed to develop feasible SPMs with optimized structural arrangements that meet the desired operational objectives.
- 5 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (4) , 5503-5509
Cost-Effective Assessment of Surface-Mounted Permanent-Magnet Motors for Refrigerant Compressor Applications Used in High-Temperature Environments
With the introduction of stricter energy-efficiency-ratio regulations, the surface-mounted permanent-magnet motor (SPM) is gaining increasing attention due to its inherent high-power density. This article investigates the feasible SPM structures for refrigerant compressor applications, particularly those used in metal industry factories with high surrounding temperatures so that cost-effective solutions can be achieved. A theoretical model is first established to aid structural parameter optimizations and the management of specific operational objectives and constraints; multiple SPM arrangements are investigates, with ease of manufacturing implementation being one consideration, as shown in Liu et al. , 2021. Detailed finite element calculations and experimental measurements are performed to develop feasible SPMs with optimized structural arrangements that meet the desired operational objectives.
- 31 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (4) , 5480-5487
Design of High-efficiency Single-phase Direct-on-line Synchronous Reluctance Motors for Pump Applications
With high surrounding temperatures, winding resistance increases and thus lowers the operational efficiency of a motor. To meet the large application requirements and conform with the ever-increasing energy-efficiency regulations for pump equipment in the metals industry, consistent efforts have focused on producing single-phase motors that can deliver superior performance at a low cost. Because the steady-state rotational speed is synchronized and no driver circuit is required, a direct-on-line synchronous reluctance motor is a potentially viable alternative to the commonly adopted induction motors. Its inherently simple structure and comparably low operational speed necessitate a challenging structural design for accomplishing the high-efficiency objectives of pump applications. These challenges and their potential solutions are reported in detail. By employing a systematic design scheme and including thermal concerns of the performance, a competitive high-efficiency single-phase direct-on-line synchronous reluctance motor for pump applications in various metal industry equipment was offered.
- 31 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (4) , 5480-5487
Design of High-efficiency Single-phase Direct-on-line Synchronous Reluctance Motors for Pump Applications
With high surrounding temperatures, winding resistance increases and thus lowers the operational efficiency of a motor. To meet the large application requirements and conform with the ever-increasing energy-efficiency regulations for pump equipment in the metals industry, consistent efforts have focused on producing single-phase motors that can deliver superior performance at a low cost. Because the steady-state rotational speed is synchronized and no driver circuit is required, a direct-on-line synchronous reluctance motor is a potentially viable alternative to the commonly adopted induction motors. Its inherently simple structure and comparably low operational speed necessitate a challenging structural design for accomplishing the high-efficiency objectives of pump applications. These challenges and their potential solutions are reported in detail. By employing a systematic design scheme and including thermal concerns of the performance, a competitive high-efficiency single-phase direct-on-line synchronous reluctance motor for pump applications in various metal industry equipment was offered.
- 8 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 57 (3) , 3004-3011
Structural Optimizations of High-efficiency Direct-On-Line Synchronous Reluctance Motors for Metal Industry Applications
To meet the severe operating conditions in the metal industry, more thorough design and operational assessments about those implemented electric motors for specific applications must be emphasized. With its inherent robust structure, the induction motor is generally adopted to fulfill such driven objective. However, due to global warming and energy conservation concerns, those strictly enforced regulations have potentially increased the complexity and cost of high efficiency induction motor. Since the synchronous reluctance motor (SynRM) has relatively simpler structure with no copper loss in its rotor, it is a very attractive alternative for accomplishing the high-efficiency objectives of those common hoist, punch, roller, and pump applications. In addition, to eliminate drive circuits that can further reduce the overall system construction costs, the rotor barriers of the SynRM can be equipped with direct-on-line capability (DOL_SynRM) with conductors filled in. The impacts to the operational performance of these DOL_SynRMs for different applications will all be thoroughly investigated. The competitive high-efficiency DOL_SynRMs for driving various metal industry equipment can thus be offered.
- 8 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 57 (3) , 3004-3011
Structural Optimizations of High-efficiency Direct-On-Line Synchronous Reluctance Motors for Metal Industry Applications
To meet the severe operating conditions in the metal industry, more thorough design and operational assessments about those implemented electric motors for specific applications must be emphasized. With its inherent robust structure, the induction motor is generally adopted to fulfill such driven objective. However, due to global warming and energy conservation concerns, those strictly enforced regulations have potentially increased the complexity and cost of high efficiency induction motor. Since the synchronous reluctance motor (SynRM) has relatively simpler structure with no copper loss in its rotor, it is a very attractive alternative for accomplishing the high-efficiency objectives of those common hoist, punch, roller, and pump applications. In addition, to eliminate drive circuits that can further reduce the overall system construction costs, the rotor barriers of the SynRM can be equipped with direct-on-line capability (DOL_SynRM) with conductors filled in. The impacts to the operational performance of these DOL_SynRMs for different applications will all be thoroughly investigated. The competitive high-efficiency DOL_SynRMs for driving various metal industry equipment can thus be offered.
- Open Access
- 1 July 2020
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 14 (10) , 1774-1783
Performance comparisons of alternative permanent‐magnet motor designs for personal mobility‐assistive device applications
Demands of appropriate personal mobility‐assistive devices for those needed persons have been increased considerably in recent years, with their specific operational requirements, developments of adequate motors to different device parts are the main concerns. For applications onto those knee joint parts of the exoskeleton system, three types of permanent‐magnet (PM) motors, namely the surface‐mounted PM motor, the Vernier motor, and the flux‐switching motor were designed. Based on the operational and physical constraints of the particular exoskeleton parts, optimisations of these PM motors were provided along with their thorough performance comparisons. From emulated finite‐element analyses along with hardware experimental validations, by following the standard test settings, selection guidance for the suitable motor structures at different operational objectives will thus be supplied.
- 1 July 2020
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 14 (10) , 1774-1783
Open AccessPerformance comparisons of alternative permanent‐magnet motor designs for personal mobility‐assistive device applications
Demands of appropriate personal mobility‐assistive devices for those needed persons have been increased considerably in recent years, with their specific operational requirements, developments of adequate motors to different device parts are the main concerns. For applications onto those knee joint parts of the exoskeleton system, three types of permanent‐magnet (PM) motors, namely the surface‐mounted PM motor, the Vernier motor, and the flux‐switching motor were designed. Based on the operational and physical constraints of the particular exoskeleton parts, optimisations of these PM motors were provided along with their thorough performance comparisons. From emulated finite‐element analyses along with hardware experimental validations, by following the standard test settings, selection guidance for the suitable motor structures at different operational objectives will thus be supplied.
- 30 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 56 (4) , 4337-4344
Rotor Conductor Arrangement Designs of High-Efficiency Direct-on-Line Synchronous Reluctance Motors for Metal Industry Applications
To meet different loading requirements in the metal industry, special attention about the operational performances and start-up characteristics of those implemented electric motors for desired driven applications must be addressed. However, because of the global warming and energy conservation concerns, the enforced operational regulations have increased the complexity of those commonly applied induction motors for supplying the desired equipment driven forces. By adopting the same stator, the synchronous reluctance motor (SynRM) can be achieved with properly redesigned rotor structure of an induction motor. Due to its robust structure and no secondary copper loss, it is very competitive for the related hoist, punch, roller, and pump applications. Furthermore, by inserting adequate ferrite permanent magnets and conductors into the rotor barriers, composition designs of the direct-on-line SynRMs (DOL_SynRMs) will also be proposed. The operational characteristics of the DOL_SynRMs for fulfilling different specifications will all be thoroughly investigated and confirmed by experimental measurements. The DOL_SynRM structures that can provide potential alternatives for related high-efficiency metal industry driven applications can thus be validated.
- 30 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 56 (4) , 4337-4344
Rotor Conductor Arrangement Designs of High-Efficiency Direct-on-Line Synchronous Reluctance Motors for Metal Industry Applications
To meet different loading requirements in the metal industry, special attention about the operational performances and start-up characteristics of those implemented electric motors for desired driven applications must be addressed. However, because of the global warming and energy conservation concerns, the enforced operational regulations have increased the complexity of those commonly applied induction motors for supplying the desired equipment driven forces. By adopting the same stator, the synchronous reluctance motor (SynRM) can be achieved with properly redesigned rotor structure of an induction motor. Due to its robust structure and no secondary copper loss, it is very competitive for the related hoist, punch, roller, and pump applications. Furthermore, by inserting adequate ferrite permanent magnets and conductors into the rotor barriers, composition designs of the direct-on-line SynRMs (DOL_SynRMs) will also be proposed. The operational characteristics of the DOL_SynRMs for fulfilling different specifications will all be thoroughly investigated and confirmed by experimental measurements. The DOL_SynRM structures that can provide potential alternatives for related high-efficiency metal industry driven applications can thus be validated.
- 15 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 54 (3) , 2947-2954
Theoretical and Experimental Investigations of the Electromagnetic Steel Compositions for Synchronous Reluctance Motors
To meet the increasingly stringent regulations on operational efficiencies of electric motors, efforts have been devoted to design and construct motors with less power losses. Without the need of rotor conductors, and hence, no secondary copper loss, the feasibilities of applying synchronous reluctance motor (SynRM) have attracted many attentions on the related industries. Since the operation of SynRM is mainly based on the reluctance torque, appropriate electromagnetic steel selections for the motors will be the key factors. To adequately evaluate the performance of SynRM, with the available magnetization and hysteresis characteristics of the commercial steel sheets, the SynRMs that are composed of different electromagnetic steels at various operational specifications will be thoroughly investigated. From theoretical analyses of the selected SynRMs by different stator and rotor material compositions along with experimental validations, valuable guidance for related SynRM constructions and operations can thus be provided for steel manufacturers and motor designers.
- 15 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 54 (3) , 2947-2954
Theoretical and Experimental Investigations of the Electromagnetic Steel Compositions for Synchronous Reluctance Motors
To meet the increasingly stringent regulations on operational efficiencies of electric motors, efforts have been devoted to design and construct motors with less power losses. Without the need of rotor conductors, and hence, no secondary copper loss, the feasibilities of applying synchronous reluctance motor (SynRM) have attracted many attentions on the related industries. Since the operation of SynRM is mainly based on the reluctance torque, appropriate electromagnetic steel selections for the motors will be the key factors. To adequately evaluate the performance of SynRM, with the available magnetization and hysteresis characteristics of the commercial steel sheets, the SynRMs that are composed of different electromagnetic steels at various operational specifications will be thoroughly investigated. From theoretical analyses of the selected SynRMs by different stator and rotor material compositions along with experimental validations, valuable guidance for related SynRM constructions and operations can thus be provided for steel manufacturers and motor designers.
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Theoretical and experimental investigations of the electromagnetic steel compositions for synchronous reluctance motors
To meet the increasingly stringent regulations on operational efficiencies of electric motors, efforts have been devoted to design and construct motors with less power losses. Without the need of rotor conductors and hence no secondary copper loss, the feasibilities of applying synchronous reluctance motor (SynRM) have attracted many attentions on the related industries. Since the operation of SynRM is mainly based on the reluctance torque, appropriate electromagnetic steel selections for the motors will be the key factors. To adequately evaluate the performance of SynRM, with the available magnetization and hysteresis characteristics of the commercial steel sheets, the SynRMs that are composed by different electromagnetic steels at various operational specifications will be thoroughly investigated. From theoretical analyses of the selected SynRMs by different stator and rotor material compositions along with experimental validations, valuable guidance for related SynRM constructions and operations can thus be provided for steel manufacturers and motor designers.
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Theoretical and experimental investigations of the electromagnetic steel compositions for synchronous reluctance motors
To meet the increasingly stringent regulations on operational efficiencies of electric motors, efforts have been devoted to design and construct motors with less power losses. Without the need of rotor conductors and hence no secondary copper loss, the feasibilities of applying synchronous reluctance motor (SynRM) have attracted many attentions on the related industries. Since the operation of SynRM is mainly based on the reluctance torque, appropriate electromagnetic steel selections for the motors will be the key factors. To adequately evaluate the performance of SynRM, with the available magnetization and hysteresis characteristics of the commercial steel sheets, the SynRMs that are composed by different electromagnetic steels at various operational specifications will be thoroughly investigated. From theoretical analyses of the selected SynRMs by different stator and rotor material compositions along with experimental validations, valuable guidance for related SynRM constructions and operations can thus be provided for steel manufacturers and motor designers.