JYJinde Yin

Jinde Yin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jinde Yin has a total of 61 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Broadband phase shifter based on SiN-MoS2 integrated racetrack resonator

    by Zhenyuan Shang, Guoqing Wang, Jiatong Li, Qianrui Huang, Jiahao Sun, Rumin Cheng, Mengyu Zhang, Junbo Yang, Ziming Zhang, Jinde Yin, et al.

    As the critical device of microwave photonics and optical communication, the low-loss and high-efficiency optical phase shifter has attracted intense attention in photonic integrated circuits. However, most of their applications are restricted to a particular band. Little is known about the characteristics of broadband. In this paper, an SiN-MoS2 integrated broadband racetrack phase shifter is demonstrated. The coupling region and the structure of the racetrack resonator are elaborately designed to improve the coupling efficiency at each resonance wavelength. The ionic liquid is introduced to form a capacitor structure. Then, the effective index of the hybrid waveguide can be efficiently tuned by adjusting the bias voltage. We achieve a phase shifter with a tunable range covering all the WDM bands and even up to 1900 nm. The highest phase tuning efficiency is measured to be 72.75 pm/V at 1860 nm, and the corresponding half-wave-voltage-length product is calculated as 0.0608 V·cm.


  • A Nanodiamonds-Engineered Optical-Fiber Plasmonic Interface for Sensitivity-Enhanced Biosensing

    by Yaofei Chen, Lu Xiao, Longqun Ni, Lei Chen, Gui-Shi Liu, Jinde Yin, Peili Zhao, Yunhan Luo, Zhe Chen

    Benefitting from the excellent characteristics such as low cytotoxicity, functionalization versatility, and tunable fluorescence, nanodiamonds (NDs) have shown enormous application potentials in the biomedical field. Herein, we proposed, for the first time to our best knowledge, to integrate NDs on a plasmonic interface constructed on a side-polished fiber using drop-casting method. The NDs engineers the plasmonic interface towards improving the sensing field thus the sensitivity, which, moreover, is dependent on the number of drop-casting cycles (DCs) and the used concentration of NDs dispersion solution. Experimental results suggest that properly increasing the NDs dispersion concentration is beneficial to obtain a higher sensitivity while using a fewer number of DCs, but the excessive concentration extremely deteriorates the resonance dip. Using the 0.2 mg/mL concentration and 3 DCs, we achieve the highest RI sensitivity of 3582 nm/RIU, which shows an enhancement of 73.8% compared to the case without NDs modification. The sensitivity enhancement in biosensing is also proved by employing bovine serum albumin as a demo. The behind mechanism is explored via characterizations and simulations. This work opens up a new application form for NDs, i.e. integrating NDs with a plasmonic interface towards high-performance biosensing.


  • MoS2 hybrid integrated micro-ring resonator phase shifter based on a silicon nitride platform

    by Zexing Zhao, Ziming Zhang, Jiatong Li, Zhenyuan Shang, Guoqing Wang, Jinde Yin, Hao Chen, Kai Guo, Peiguang Yan

    We demonstrate a low-power, compact micro-ring phase shifter based on hybrid integration with atomically thin two-dimensional layered materials, and experimentally establish a low-loss silicon nitride platform. Using a wet transfer method, a large-area few-layer MoS2 film is hybrid integrated with a micro-ring phase shifter, leading to a tuning efficiency of 5.8 pm V−1 at a center wavelength of 1545.294 nm and a half-wave-voltage-length product as low as 0.09 V cm. Our device is designed to provide a hybrid-integration-based active phase modulation scheme for integrated optical communication networks with large-cross-section silicon nitride waveguides.


  • Fabrication of a rutile titanium dioxide thin film heterostructure using ion-implantation with Cu-Sn bonding

    by Yujie Ma, Cangtao Zhou, Bingxi Xiang, Mingyang Yu, Fei Lu, Jinde Yin, Shuangchen Ruan

    Single crystalline titanium dioxide thin film in the rutile phase (r-TiO2) is exfoliated from bulk material using a He+-implantation method, and is bonded onto SiO2 substrate to form a heterostructure using Cu-Sn bonding technology. The exfoliated r-TiO2 thin film was examined to be in good quality, and the exfoliation mechanism of ion-implanted r-TiO2 was analyzed. The obtained r-TiO2 thin film heterostructure with high refractive index contrast has a potential application in the fabrication of high-Q optical microcavities in visible wavelengths, which is useful in integrated photonic devices.


  • Open Access

    Highly stable in-fiber integrated silica microresonator

    by Jinde Yin, Hao Chen, Zewen Zhou, Wenyin Wei, Bo Zhang, Yang Yu, Junfeng Jiang, Huifeng Wei, Peiguang Yan, Shuangchen Ruan

    We demonstrate a compact in-fiber integrated microresonator based on a silica microsphere and microstructure fiber. Whispering-gallery-modes (WGMs) are effectively excited through evanescent field coupling between the silica microsphere and one of the input tube waveguides of negative curvature fiber. The WGM spectrum with the Q-factor of ∼2.56 × 103 and the extinction ratio of ∼15.2 dB is achieved. The transmission spectra evolution for 5 h reveals the long-term stability of WGM excitation. The experimental results indicate that the in-fiber integrated resonator has the advantages of high stability, high integration, robustness, alignment-free assembly structure, and low cost, motivating potential applications in the lab-in-fiber platform.


  • Ultrafast fiber laser based on HfSe 2 saturable absorber

    by Xu Wu, Zewen Zhou, Jinde Yin, Min Zhang, Liangliang Zhou, Quanxin Na, Jintao Wang, Yang Yu, Junbo Wang, Ronghua Chi, et al.

    We demonstrate the HfSe 2 saturable absorber (SA) for the generation of ultrafast pulse laser. The HfSe 2 SA device is fabricated by integrating HfSe 2 nanosheets (NSs) with a microfiber. The material and optical characteristics of HfSe 2 NSs show their high quality. The nonlinear optical absorption of HfSe 2 SA is measured with a modulation depth of 5.8%. Stable soliton mode-locked laser based on HfSe 2 SA is realized at the central wavelength of 1561.43 nm with pulse duration of 297 fs and the maximum pulse energy of 2.68 nJ. Our soliton fiber laser has a maximum output power of 48.5 mW with a high slope efficiency of 12.8%, which indicate that HfSe 2 is a good candidate of SA for high efficient ultrashort pulses generation.


  • Few-layer metal monochalcogenide saturable absorbers for high-energy Q-switched pulse generation

    by Mengyu Zhang, Hao Chen, Jintao Wang, Zhiyang Wang, Jiaqiang Zhang, Junzi Li, Tingchao He, Jinde Yin, Peiguang Yan, Shuangchen Ruan

    Two-dimensional layered materials have been widely utilized as nonlinear absorption materials to transfer continue-wave into pulse trains in fiber laser systems. Here, we prepare robust GaSe/GeSe composites with high power bearing capacity as saturable absorbers (SAs) and then investigate their nonlinear optical properties via broadband Z-scan measurement at 800 nm and 1550 nm, respectively. The modulation depths of GaSe/GeSe based SAs are measured to be 11.97% and 7.69% at 1550 nm. After incorporating the GaSe/GeSe SAs into an Erbium-doped fiber laser cavity, passively Q-switched pulse trains could be obtained with repetition rates changing from 83.58 to 136.78 kHz (70.41 to 161.65 kHz). The maximum output power and pulse energy are 52.1 mW/370.67 nJ (GaSe) and 21.6 mW/133.74 nJ (GeSe) under the maximum pump power of 600 mW. The results indicate that GaSe and GeSe possess outstanding thermal stability and could be employed as remarkable saturable absorption materials for high-energy pulses generation.


  • Ultrafast Pulse Generation for Er- and Tm- Doped Fiber Lasers With Sb Thin Film Saturable Absorber

    by Jintao Wang, Hao Yuan, Hao Chen, Jinde Yin, Junzi Li, Tingchao He, Chunyu Guo, Peiguang Yan, Jinzhang Wang, Rong Yang, et al.

    Ultrafast fiber lasers with a wide spectral range have huge demands for many applications. In this paper, magnetron sputtering deposition (MSD) technique was utilized to prepare a new broadband microfiber based Sb thin film saturable absorbent (SA), and ultrafast pulses in both 1.5 and 2 μm wavebands were generated with the integrated microfiber-based Sb thin film SA in erbium-doped fiber laser (EDFL) and thulium-doped fiber laser (TDFL), respectively. Pulse duration of 544 fs / 972 fs and output power of 21.76 mW / 36.1 mW centered at 1557 nm / 1892 nm were respectively produced from stable mode-locked EDFL and TDFL. To the best our knowledge, this is the first time that ultrafast fiber lasers including both 1.5 μm and 2 μm wavebands were mode locked by a single microfiber-based Sb thin film SA.


  • High-power mode-locked thulium-doped fiber laser with tungsten ditelluride as saturable absorber

    by Zhijian Zheng, Jintao Wang, Jinde Yin, Deqin Ouyang, Xikui Ren, Peiguang Yan, Jinzhang Wang, Jihong Pei, Qitao Lue, Shuangchen Ruan

    A passively mode-locked thulium-doped fiber laser using a tungsten ditelluride saturable absorber ( W T e 2 - S A ) is demonstrated. High-power mode-locked pulses with an average output power of 108.1 mW were achieved by incorporating the W T e 2 - S A into a thulium-doped fiber oscillator. To the best of our knowledge, this is the highest average power obtained from a W T e 2 - S A -based fiber laser. We further amplified the output power to 5.60 W with an all-fiber thulium-doped double-cladding fiber amplifier. Our result indicates that W T e 2 - S A could be an excellent candidate for a high-power fiber laser system.


  • All-fiber-optic vector magnetometer based on nano-magnetic fluids filled double-clad photonic crystal fiber

    by Jinde Yin, Shuangchen Ruan, Tiegen Liu, Junfeng Jiang, Shuang Wang, Huifeng Wei, Peiguang Yan