MTMirjam Theelen

Mirjam Theelen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mirjam Theelen has a total of 123 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    LARS: Laser Assisted Recycling of Solar Modules

    by Maarten Van der Vleuten, Remi Aninat, Johan Bosman, Remco Koper, Toon Ijzerman, Bart Geerligs, Quentin Mottet, Quan Keijsers, Mirjam Theelen

    High-value photovoltaic (PV) recycling requires opening routes for the PV module stack that provide access to silicon and metallisation rather than only recovering mass. In this work, we present nanosecond laser-assisted recycling of silicon PV modules (LARS), using green and near-infrared (NIR) pulsed lasers to selectively interact with silicon through the transparent laminate stack. The process weakens the cell–encapsulant interface, enables module opening, and simultaneously removes the SiNₓ anti-reflective (AR) coating, thereby avoiding a dedicated HF-based SiNₓ etch in the downstream route. D²-based laser ablation threshold analysis is used to compare 532 nm (“green”) and 1064 nm (“NIR”) nanosecond regimes and to guide process optimisation. Although green, nanosecond-pulsed (ns-pulsed) processing still requires roughly two times lower fluence to achieve delamination, we have achieved a large reduction in fluence needed with NIR ns-pulsed processing. This makes NIR ns-pulsed very relevant industrially, even in comparison to green laser sources, which are substantially more expensive. A subsequent wet-chemical step at the lab scale resulted in a silicon purity up to 99.998%, with 97% yield, and silver purity of 99.7% with 97% yield. These results indicate a strong increase in the potential recovered material value compared with state-of-the-art routes, like shredding. The method has been successfully applied to multiple commercial silicon module architectures, including PERC, TOPCon, Al-BSF, polymer-frontsheet modules, and recent IBC modules, demonstrating versatility. It is also very scalable, since ns-pulsed NIR laser platforms have become substantially cheaper in the last decade.

  • Open Access

    Assessing circularity in photovoltaics through a product-level circularity metric (PLCM)

    by Simona Villa, Marylou Karpinski, Mirjam Theelen

    This paper introduces the product–level circularity metric (PLCM) as a practical tool to assess the circularity of integrated photovoltaic (PV) elements. The PLCM, originally proposed by Linder et al., quantifies product circularity by comparing the economic value of reused, recycled, or repurposed components to the total value of the product. By focusing on economic value rather than mass or energy, the PLCM offers actionable insights for manufacturers, designers, and policymakers, highlighting opportunities to enhance resource efficiency, reduce material dependency, and support circular design strategies. To demonstrate its applicability, we adapted the PLCM methodology for PV products and developed an Excel–based tool to facilitate its use. Three illustrative case studies are presented: a building-integrated-PV roof tile with embedded flexible thin-film solar cells, a conventional crystalline-silicon module, and a glass–glass perovskite module. These examples show how components with higher economic value can strongly influence the overall circularity score and how PLCM can guide design–for–circularity decisions. In the perovskite module case, a scenario–based sensitivity analysis further highlights how different assumptions on material recirculation and design choices can meaningfully shift the resulting circularity assessment, offering valuable insights for prospective technology development. While the metric does not account for energy consumption or end–of–life recyclability, it complements existing sustainability indicators such as life cycle assessment (LCA). Used together, PLCM and LCA provide a more holistic view of product sustainability. This paper underscores the PLCM’s potential to advance circular–economy principles in the PV industry and to support transparent, design–oriented evaluation of material choices and product architectures.

  • Open Access

    Luminescent Imaging of the Reverse Bias Behavior of Perovskite Solar Cells Using ReBEL

    by Jonathan Henzel, Klaas Bakker, Sjoerd Veenstra, Olindo Isabella, Luana Mazzarella, Arthur Weeber, Mirjam Theelen

    Partial shading remains a critical challenge for perovskite photovoltaics, as shaded cells in otherwise illuminated modules operate in reverse bias, which can accelerate degradation. In other solar cell technologies, reverse bias electroluminescence (ReBEL) imaging has been successfully employed to investigate the reverse bias breakdown mechanism. Here, ReBEL imaging is proposed as technique for imaging the local reverse bias current flow on perovskite solar cells. To that end, the ReBEL signal is affirmed to originate from radiative recombination in the absorber layer. ReBEL imaging is compared to established thermal current imaging techniques and reveals superior sensitivity and spatial resolution while showing similar features in the investigated samples. Further experiments reveal a dependence on the reverse bias current: The spatial distribution of the ReBEL signal differs significantly between small and large current injection levels. This could point towards two different breakdown mechanisms. These results show that, despite some open questions, ReBEL imaging could help understand the reverse bias behavior of perovskite solar cells better.

  • Determining the Reverse Bias Breakdown Voltage of Perovskite Solar Cells

    by Jonathan Henzel, Klaas Bakker, Sjoerd Veenstra, Olindo Isabella, Luana Mazzarella, Arthur Weeber, Mirjam Theelen

    The degradation of perovskite solar cells due to reverse bias (RB) is one of the remaining challenges hindering the commercialization of the technology. To overcome this challenge, a thorough understanding of and control over the breakdown (BD) voltage are crucial. A prerequisite for this is that the community “speaks the same language,” that is, that the reported BD voltages are comparable. A review of literature data shows that the impact of measurement parameters is often unknown and seems to depend strongly on sample properties. It follows that standardization is the only way to reach comparability. Here, a set of measurement parameters to fill this gap is proposed. Additionally, various definitions of a “BD voltage” are used in parallel without any way of relating them to each other; this metric and its determination need to be considered as well. After a thorough discussion of the available definitions, the use of the point of maximum curvature is introduced. Its main advantage is the possible connection to an analytical description of the BD mechanism. In this way, a starting point for scientists new to the field of RB stability is provided, and the ground for a broader discussion in the community is prepared.

  • The impact of low-intensity illumination on the reverse bias behavior of perovskite solar cells

    by Jonathan Henzel, Klaas Bakker, Sjoerd Veenstra, Olindo Isabella, Luana Mazzarella, Arthur Weeber, Mirjam Theelen

    In a realistic partial shading event, reverse bias might coincide with low-intensity illumination. Then, two mechanisms induce opposing shifts of the breakdown voltage.


  • Potential for Recycled Silicon Solar Cells as Feedstock for New Ingot Growth

    by L. J. Geerligs, Ando D. Kuypers, Mirjam J. Theelen

    This paper investigates, by modeling, the potential for high‐value recycling of silicon wafers recovered from end‐of‐life PV modules. Technology for PV module recycling is making steady progress, both at recycling companies and R&D institutes, and it is possible that as a result, soon a stream of wafers or wafer fragments recovered from waste modules will become commercially available. Recycling the silicon for manufacturing of new PV modules is an opportunity both for reduction of cost and reduction of environmental footprint of PV. In this paper, we analyze possibilities for recycling of wafer fragments as feedstock for new silicon ingot growth . This could save up to about 0.16 kWh/Wp energy for production of the new PV system. Compared with lower value applications of the recovered silicon, the potential value and energy savings when used as feedstock for ingot growth are considerably higher. This paper presents the possibilities and challenges for recycling wafer fragments from the point of view of dopant type and resistivity control, and mitigation of the impact of recombination activity from possible increased impurity levels or related to boron. Because in current PV production a rapid transition to n‐type wafer doping is taking place, the paper also considers the question what can be done with p‐type doped recycled wafer material. We illustrate how application for perovskite–silicon tandem cells helps to mitigate possible performance loss from metallic impurities or boron. The application in tandem cells is perhaps the only realistic approach to make economically worthwhile use of recycled B‐doped silicon as feedstock for silicon ingot growth.


  • Open Access

    Comparing Environmental Impacts of Single-Junction Silicon and Silicon/Perovskite Tandem Photovoltaics–A Prospective Life Cycle Assessment

    by Mitchell K. van der Hulst, Dorottya Magoss, Yiri Massop, Sjoerd Veenstra, Niels van Loon, Ilker Dogan, Gianluca Coletti, Mirjam Theelen, Selwyn Hoeks, Mark A. J. Huijbregts, et al.

    Tandem photovoltaics applying perovskite on silicon are considered to be a possible route to sustaining continuous efficiency improvements and price reductions. A meaningful market share for such tandems is, however, at least a decade away. Herein, a comprehensive prospective life cycle assessment was conducted, comparing the full life cycle of monofacial and bifacial silicon/perovskite tandem panels with single-junction silicon panels produced up to 2050. The end-of-life included the recovery of silicon and silver. Climate change impacts per kilowatt hour were projected to decrease by two-thirds over time. Tandem panels are expected to reach impacts of 8-10 g CO2-eq/kWh in 2050, while single-junction panels may reach 11-13 g CO2-eq/kWh in 2050. Other midpoint impact categories with substantial contributions to damaging human health and ecosystem quality were toxicity, particulate matter formation, and acidification, with tandems having lower impacts in each category. Reductions in impacts over time are mainly the result of grid mix decarbonization and panel efficiency improvements. Balance-of-system and recycling were found to contribute substantially to these impact categories. To ensure that tandem panels provide environmental benefits, annual degradation rates should not exceed 1% for monofacial or 3% for bifacial tandems, and refurbishment of panels with advanced degradation is crucial.


  • Open Access

    Impact of the Current on Reverse Bias Degradation of Perovskite Solar Cells

    by Jonathan Henzel, Klaas Bakker, Mehrdad Najafi, Valerio Zardetto, Sjoerd Veenstra, Olindo Isabella, Luana Mazzarella, Arthur Weeber, Mirjam Theelen

    Nonequal current generation in the cells of a photovoltaic module, e.g., due to partial shading, leads to operation in reverse bias. This quickly causes a significant efficiency loss in perovskite solar cells. We report a more quantitative investigation of the reverse bias degradation. Various small reverse biases (negative voltages) were applied for different durations. After normalizing the applied voltages with the breakdown voltages, we found similar dependences of the reverse bias current and the degradation rate. We draw conclusions regarding possible degradation mechanisms and propose a way to increase the comparability of degradation rates for comparing different perovskite solar cells.


  • Fundamental Mechanisms Behind the Reverse Characteristic of Cu(In,Ga)Se2 Solar Cells

    by Klaas Bakker, Suzanne Assen, Alix Rasia, Nicolas Barreau, Arthur Weeber, Mirjam Theelen

    Partial shading of PV modules can lead to degradation of the shaded cells. The degradation originates from a reverse bias voltage over the shaded cells. In order to mitigate reverse bias damage in Cu(In,Ga)Se2 (CIGS) modules, a good understanding of the fundamental mechanisms governing the reverse characteristic is required. In this study, a model is introduced that describes this behavior for CIGS cells. In this model, the low and non-Ohmic leakage current is accounted for by the space charge limited current component. A sharp increase in current that is typically observed in the CIGS reverse characteristics can be described by Fowler–Nordheim tunneling. This model has been validated against measurements performed at different temperatures and illumination intensities, and is able to describe the dependencies of the reverse bias behavior on both temperature and illumination.


  • In-situ X-ray diffraction annealing study of electroplated and sputtered Cu-In-Ga precursors for application to sequential Cu(In,Ga)Se2 processes

    by R. Aninat, A. Hovestad, F. van Zelst, F.J. van Den Bruele, J.J. Schermer, J. Emmelkamp, E. Vlieg, H. Linden, M. Theelen