ACAndrea Chiang

Andrea Chiang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Andrea Chiang has a total of 82 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Crustal and upper mantle model of the Middle East based on full-waveform inversion

    by Rıdvan Örsvuran, Ebru Bozdağ, Daniel Peter, Andrea Chiang, Rengin Gök, Yahya M Tarabulsi, Ahmed Hosny, Khalid Yousef, Abdullah Mousa

    SUMMARY: We present MEAD-M20 (Middle East ADjoint-Model20), a new tomographic model of the Middle East and its surrounding regions, including Anatolia, Iran and the Caucasus. The model is developed within a full-waveform inversion framework, based on 3-D numerical wavefield simulations and the adjoint method, after 20 conjugate gradient iterations, utilizing an extensive data set from permanent and temporary stations available from EarthScope and regional networks, such as Kandilli Observatory, the Mesopotamian Seismological Network of Iraq, the International Institute of Earthquake Engineering and Seismology of Iran and additional data made available from the Saudi Geological Survey. Starting from the global full-waveform inversion model GLAD-M25 on a $60^\circ \times 60^\circ$ regional mesh, we invert 210 regional earthquakes recorded by 1215 stations to obtain the P- and S-wave model with shear-wave transverse isotropy confined to the upper mantle. During the first 12 iterations, we use two period bands, combining multitaper traveltime measurements of 15–50 s body waves and 50–100 s body and surface waves on three components. We use a refined crustal mesh to better sample the crust after the 12th iteration and gradually decrease the minimum surface-wave period to 30 s. MEAD-M20 provides a self-consistent P- and S-wave model ready for seismic wave simulations, which is essential for accurate earthquake location, source parameter estimation and seismic hazard assessment in regions such as the Middle East, where complex geology and tectonics prevail. MEAD-M20 reveals several important geodynamical and tectonic features, including local mantle plumes beneath the Arabian Plate, Jordan and the Levant, characterized by low-velocity anomalies and likely associated with volcanism in the Harrats, Jordan and Karacadağ regions. In addition to the active subduction and rifting in the area, the model clearly identifies remnants of the Tethys Ocean beneath Eastern Anatolia, which become progressively shallower towards the Makran region in the south, consistent with the subduction history along the Bitlis–Zagros suture zone. We also observe lithospheric-scale low-velocity anomalies associated with the North and East Anatolian faults, extending to depths of approximately 200 km.

  • Open Access

    Comprehensive Earthquake Catalog Update and Spatiotemporal Distribution Analysis for Iraq and Surrounding Regions, Northeastern Arabian Plate

    by Muntadher Al-Kaabi, Wathiq Abdulnaby, Najah Abd, Mustafa Bader, Mohammed Oufi, Kevin Mayeda, Tuna Onur, Carlos Herrera, Dhuha Gateaa, Hanan Mahdi, et al.

    Summary: The updated earthquake catalog for Iraq covers the period from 1900 to the end of 2021 and includes over 37 000 recorded earthquakes. To create this comprehensive catalog, five key steps were taken: compiling bulletins, calculating moment magnitudes, harmonizing magnitudes, establishing empirical conversion relations, and evaluating the completeness of the catalog. A notable enhancement in this update is the direct calculation of moment magnitudes for approximately 2 800 earthquakes, achieved through the coda envelope technique and waveform data from the Mesopotamian Seismological Network (MPSN) in Iraq. This updated catalog serves as a valuable resource for examining the spatiotemporal distribution of earthquakes, with respect to earthquake density, maximum moment magnitude, and seismogenic depths. Additionally, the Gutenberg-Richter relationship was applied to calculate the a- and b-values specific to Iraq. The findings show that the Zagros Fold-Thrust Belt has a seismogenic layer (source) that ranges from 2 to 33 km deep and experiences high seismic activity. In contrast, the Mesopotamian Foredeep has a seismogenic layer ranging from 1 to 25 km deep and has lower seismic activity. The greatest seismic activity is concentrated around the Mandili-Badra-Teeb fault, which has experienced significant ruptures over time. The Outer Arabian Platform is identified as the main area of seismic activity, while additional activity occurs on the Inner Arabian Platform. Three major tectonic boundaries define the distribution of earthquakes in the northeastern Arabian Plate. These boundaries are defined by the Main Zagros Reverse Fault, the Zagros Foredeep Fault, and the Anah Graben and Abu Jir-Euphrates Fault Zone. These boundaries highlight variations in seismicity levels and the spatial distribution of deformation in the region. The updated earthquake catalog presented in this study is expected to play a vital role in regional seismicity assessments and seismic hazard analyses for Iraq and its surrounding areas.

  • Open Access

    Improved Regional Moment Tensor Inversion for Moderately Large Earthquakes in the Western United States Using a 3D Earth Model Based on Full Waveform Tomography

    by Andrea Chiang, Arthur J. Rodgers, Lion Krischer, Michael Afanasiev, Christian Boehm, Claire Doody, Nathan Simmons

    The nature of seismic sources for moderately large (moment magnitude, Mw 5.0–6.5) events are commonly characterized by their moment tensor (MT) solutions and obtained by inversion of regional distance (200–1600 km) long-period (20–50 s) waveforms. Regional MT estimates are often calculated from average plane-layered, one-dimensional (1D) velocity models. However, 1D model calculations can produce misfits in the arrival times and waveform shapes that introduce errors, particularly at longer distances or for shorter periods, which are necessary for analyzing lower magnitude events. Approximate Earth models (e.g., 1D) representing broad areas may be inadequate, particularly in the crust and uppermost mantle of tectonically complex regions. In this study, we show how a three-dimensional (3D) Earth model obtained from full waveform inversion tomography can improve waveform fits and decrease phase errors. We developed a platform and workflow to perform routine 3D MT inversions and inverted MTs for 25 earthquakes in the western United States and seven nuclear explosions using an average 1D and a recent 3D Earth model, WUS256 (Rodgers et al., 2022). Using the 3D model improves waveform fits (variance reduction and phase time shifts) compared with the 1D model, and the 3D MT solutions are stable across large distances. This study shows that 3D models obtained from full waveform tomography can improve MTs and source characterization especially at far regional distances (>800 km).


  • PySolate : A Python-Based Thresholding Tool to Denoise or Designal Seismic Waveforms Based on the Continuous Wavelet Transform

    by Ana C. Aguiar, Andrea Chiang, Stephen C. Myers

    PySolate is a Python-based toolset that implements the continuous wavelet transform and nonlinear thresholding operations to denoise or designal seismic data, following Langston and Mousavi (2019). This filtering approach can remove microseismic noise to isolate intermediate-period seismic signals that are key to enabling full-waveform modeling and analysis of smaller-magnitude regional events. This approach is best for the application to signals with frequency or time separation of signal and noise, in contrast to Fourier analysis, which is effective when signal and noise are separated in frequency. We demonstrate the Python toolset using the six announced Democratic People’s Republic of Korea declared nuclear tests, showing the effectiveness of isolating the seismic signal compared to standard bandpass filtering. We also demonstrate the ease of using the toolset with any Python processing tools.


  • Bayesian Inference for the Seismic Moment Tensor Using Regional Waveforms and Teleseismic-P Polarities with a Data-Derived Distribution of Velocity Models and Source Locations

    by Andrea Chiang, Sean R. Ford, Michael E. Pasyanos, Nathan A. Simmons

    The largest source of uncertainty in any source inversion is the velocity model used in the transfer function that relates observed ground motion to the seismic moment tensor. However, standard inverse procedure often does not quantify uncertainty in the seismic moment tensor due to error in the Green’s functions from uncertain event location and Earth structure. We incorporate this uncertainty into an estimation of the seismic moment tensor using a data-derived distribution of velocity models based on complementary geophysical data sets, including thickness constraints, velocity profiles, gravity data, surface-wave group velocities, and regional body-wave travel times. The data-derived distribution of velocity models is then used as a prior distribution of Green’s functions for use in Bayesian inference of an unknown seismic moment tensor using regional and teleseismic-P waveforms. The use of multiple data sets is important for gaining resolution to different components of the moment tensor. The combined likelihood is estimated using data-specific error models and the posterior of the seismic moment tensor is estimated and interpreted in terms of the most probable source type.


  • Relocation of the 8 September 2023 High Atlas, Morocco, Earthquake Aftershock Sequence

    by István Bondár, Youssef Timoulali, Andrea Chiang, Lahcen Hni, Mohamed Kasmi

    The earthquake that occurred on 8 September 2023, with a magnitude of 6.8, was the most destructive earthquake event in Morocco in the past decade. This earthquake took place in the Al Haouz region, located in the western part of the High Atlas Mountain range. To better understand what caused and triggered this earthquake, the earthquake catalogs including P and S arrival times were collected from the Moroccan seismic network and combined with regional data from the International Seismological Centre. The mainshock and aftershocks were relocated by using iLoc, a state-of-the-art single-event location algorithm, and then by the multiple event location double-difference algorithm, hypoDD. The improved earthquake relocations using iLoc and the double-difference methods provide sharper lineation of seismicity and agree well with tomographic images of the earthquake zone. The seismicity distribution and the focal mechanism of the mainshock indicate that the earthquake sequence has occurred along the South Atlas fault system.


  • Using a 1D Radially Symmetric Coda Envelope Model for Robust Moment Magnitude (Mw) Estimation in Iraq’s Tectonically Diverse Zones

    by Muntadher Al-Kaabi, Kevin Mayeda, Jorge Roman-Nieves, Andrea Chiang, Hanan Mahdi, Haydar Al-Shukri

    Robust estimation of moment magnitude (Mw) can be challenging for Iraq due to the strong lateral heterogeneity across diverse tectonic zones. We aim to improve moment magnitude estimation by investigating the reliability of using a 1D coda envelope model in diverse tectonic zones of different lateral effects and offer a way forward for reliable estimates of Mw for small events that are difficult to waveform model. Iraq comprises two main tectonic zones: (1) the Outer platform, consisting of the northwestern Zagros fold-thrust belt and the Mesopotamian foredeep, and (2) the Inner Arabian platform which is overlain by the Iraqi desert. A simple 1D coda envelope model was used because coda waves have a low sensitivity to the source and path heterogeneity. Three separate coda calibrations were conducted to investigate the robustness of a single 1D calibration to fit the country: Whole-region calibration, Zagros calibration, and Mesopotamia calibration. In the whole-region calibration, we used stations from both the Zagros and Mesopotamia zones. In the two other calibration models, we used only stations that were in those particular zones. Ground-truth reference spectra derived from the coda spectral ratio method were used to constrain high-frequency site terms. There was no drastic difference when comparing the moment magnitudes calculated from the waveform modeling and the three calibration models. The results show that the 1D coda envelope model is a reliable method even for a region with diverse tectonic zones. Hence, we recommend using the whole-region calibration model for moment magnitude estimation that provides more complete path coverage and avoids biases introduced by path correction failures. The proposed calibration is a fundamental step in updating the comprehensive earthquake catalog and probabilistic seismic hazard assessments for Iraq.


  • Improved Earthquake Source Parameters with 3D Wavespeed Models in California and Nevada

    by Claire Doody, Arthur Rodgers, Andrea Chiang, Michael Afanasiev, Christian Boehm, Lion Krischer, Nathan Simmons

    Seismic tomography harnesses earthquake data to explore the inaccessible structure of the Earth. Adjoint waveform tomography (AWT), a method of seismic tomography, updates the tomographic model by optimizing the fit between observed earthquake data and synthetic waveforms. The synthetic data are calculated by solving the wave equation through a given 3D model. An important requirement to calculating synthetics is the source information (location, centroid time, depth, and moment tensor). Errors in source information affect the quality of the synthetics produced, which in turn can limit how structure can be inferred in the AWT workflow. To test the effect of updating source information, we used MTTime (Chiang, 2020), a time-domain full-waveform moment tensor inversion code, to calculate the moment tensors and depths of 118 earthquakes that occurred in California and Nevada over a 20-yr period. We calculated 3D Green’s functions using a 3D seismic wavespeed model of California and Nevada (Doody et al., 2023b). We show that the inverted solutions provide better waveform fits than the Global Centroid Moment Tensor catalog and increase usable, well-correlated data by up to 7%. Therefore, we argue that recalculating source parameters should be considered in AWT workflows, particularly for smaller magnitude events (Mw<5.0).


  • Compilation of a Comprehensive Earthquake Catalog and Relocations in the Caucasus Region

    by Tea Godoladze, Rengin Gök, Tuna Onur, Irakli Gunia, Manana Dzmanashvili, Giorgi Boichenko, Albert Buzaladze, István Bondár, Lana Ratiani, Tinatin Rostomashvili, et al.

    Instrumental seismic monitoring has a long history in the Caucasus and started in 1899 when the first seismograph was installed in Tbilisi, Georgia. Much of the analog paper records from this time period are preserved in the Tbilisi archives because Georgia served as the regional data center. In the 1990s, due to the collapse of the Soviet Union and the political turmoil in the region, the analog networks and the communication between the newly formed national networks deteriorated. In Georgia, for the next 13 yr, the seismic network coverage was poor until the 2002 Tbilisi earthquake. Following this earthquake, the first permanent digital seismic station in Georgia was established in Tbilisi in 2003. The digital era progressively improved the ability to collect and archive data and today more than a hundred broadband seismic stations (including temporary arrays) are operating in the southern Caucasus. Until recently, the region lacked a coordinated effort to catalog all analog and digital era data collected by different countries into a single repository. As a result of collaboration between Lawrence Livermore National Laboratory, the Ilia State University, and the Republican Seismic Survey Center of Azerbaijan, a comprehensive earthquake catalog was compiled for the Caucasus and neighboring areas as part of a broader probabilistic seismic hazard assessment project. This project digitized Soviet-era paper bulletins, compiled a unified earthquake catalog from regional bulletins, developed 1D reference velocity model, and used it to relocate the events. The final catalog contains 16,963 events with magnitudes 3.7 and above, bringing together all the available data sets in the Caucasus region from 1900 to 2015, significantly improving locations, and generating the most complete earthquake catalog in the region, temporally and geographically.


  • Open Access

    CANVAS: An Adjoint Waveform Tomography Model of California and Nevada

    by Claire Doody, Arthur Rodgers, Michael Afanasiev, Christian Boehm, Lion Krischer, Andrea Chiang, Nathan Simmons

    We present the California‐Nevada Adjoint Simulations (CANVAS) model, an adjoint waveform tomography model of the crust and uppermost mantle of the states of California and Nevada. We used WUS256 (Rodgers et al., 2022, https://doi.org/10.1029/2022jb024549) as the starting model and iteratively decreased the minimum period of CANVAS from 30 to 12 s. CANVAS was iterated in two distinct stages: the first stage with source mechanisms from the Global Centroid Moment Tensor (GCMT) catalog and the second stage with inverted moment tensors (MT) using the CANV_WUS model (Doody et al., 2023, https://doi.org/10.1029/2023jb026463). We show that updating the MTs with 3D Green's functions improved waveform fits and azimuthal coverage of windowed data used to calculate the gradients. As for the model itself, we improved waveform fits over WUS256, particularly in the dispersed surface waves. CANVAS resolved tectonic features seen in other models and accurately defined the depth to basement of major basins, including the Central Valley and the Ventura Basin. We propose CANVAS as a starting model for crustal tomography models on smaller scales.