Fei Xue
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Fei Xue has a total of 105 co-authors. Here are the top co-authors by number of shared publications:
- Long-Qing Chen
Pennsylvania State University
7 shared publications Long-Qing Chen
6 shared publicationsYou-Hai Wen
National Energy Technology Laboratory, Albany, USA
5 shared publicationsTian-Le Cheng
National Energy Technology Laboratory, Albany, USA
4 shared publicationsYinkai Lei
National Energy Technology Laboratory Albany Oregon USA
4 shared publicationsHarry Abernathy
3 shared publications
Latest Publications
- 24 November 2025
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 109 (1)
Phase‐field modeling of crack growth and interface sliding in ceramic matrix composites
Fiber‐reinforced ceramic matrix composites (CMCs) are used in structural components of gas turbines and fusion reactors due to their high toughness and ability to withstand ultra‐high temperatures. The enhanced fracture toughness of CMCs arises from the complex interactions between mechanical damage and their microstructures that involve fiber bridging, fiber pull‐out, crack deflection, and sliding at the fiber‐matrix interfaces. However, there is a lack of microstructure‐resolved models that enable direct simulation of these damage processes. This study introduces a phase‐field model that explicitly accounts for microstructure‐level cracking and interface sliding in CMCs. Simulations are performed to investigate the effects of fiber diameter, orientation, length, density, and interface sliding resistance. Fiber bridging and fiber pull‐out are successfully simulated. In particular, the simulation results demonstrate the critical role of interface sliding in fiber bridging. Parametric studies suggest that thicker fibers, longer fibers, and lower interface sliding resistance can lead to enhanced performance of CMCs when fiber bridging dominates the damage processes. This model has demonstrated its capability to serve as a valuable tool for quantitative understanding of CMC damage processes and for guiding design of the microstructures for next‐generation CMCs.
- 24 November 2025
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 109 (1)
Phase‐field modeling of crack growth and interface sliding in ceramic matrix composites
Fiber‐reinforced ceramic matrix composites (CMCs) are used in structural components of gas turbines and fusion reactors due to their high toughness and ability to withstand ultra‐high temperatures. The enhanced fracture toughness of CMCs arises from the complex interactions between mechanical damage and their microstructures that involve fiber bridging, fiber pull‐out, crack deflection, and sliding at the fiber‐matrix interfaces. However, there is a lack of microstructure‐resolved models that enable direct simulation of these damage processes. This study introduces a phase‐field model that explicitly accounts for microstructure‐level cracking and interface sliding in CMCs. Simulations are performed to investigate the effects of fiber diameter, orientation, length, density, and interface sliding resistance. Fiber bridging and fiber pull‐out are successfully simulated. In particular, the simulation results demonstrate the critical role of interface sliding in fiber bridging. Parametric studies suggest that thicker fibers, longer fibers, and lower interface sliding resistance can lead to enhanced performance of CMCs when fiber bridging dominates the damage processes. This model has demonstrated its capability to serve as a valuable tool for quantitative understanding of CMC damage processes and for guiding design of the microstructures for next‐generation CMCs.
- 15 November 2024
- Published by Elsevier in Acta Materialia
- Vol. 284
Phase-field modeling of thermally-grown oxide and damage evolution in environmental barrier coatings
- 15 November 2024
- Published by Elsevier in Acta Materialia
- Vol. 284
Phase-field modeling of thermally-grown oxide and damage evolution in environmental barrier coatings
- Open Access
- 8 October 2024
- Published by Office of Scientific and Technical Information (OSTI)
Microstructure-Based Modeling of Inner Oxygen Pressure in Solid Oxide Electrolysis Cells
One major degradation mechanism during long-term operation of solid oxide electrolysis cells (SOECs) is delamination of oxygen electrodes (OEs). The driving force for the electrode delamination could be the generated high inner oxygen pressure near the electrode-electrolyte interface during operation. However, the effects of transport properties and electrode thickness on the inner oxygen partial pressure are not well understood. Here, a microstructure-based electrochemical model which includes the conduction of electrons and oxygen ions coupled with Butler-Volmer-type chemical reactions at triple-phase-boundaries (TPBs), is employed to investigate the oxygen pressure in lanthanum strontium manganate (LSM)-based SOECs. The model is applied to both two-dimensional (2D) prototype microstructures and three-dimensional (3D) realistic microstructures, and the oxygen pressure is analyzed as a function of transport properties and electrode thickness under both potentiostatic and galvanostatic operations. The simulation results suggest strategies to suppress electrode delamination. The simulation results are compared to an analytical solution, and the discrepancies are attributed to the Butler-Volmer-type kinetics included in the microstructure-based model.
- 8 October 2024
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessMicrostructure-Based Modeling of Inner Oxygen Pressure in Solid Oxide Electrolysis Cells
One major degradation mechanism during long-term operation of solid oxide electrolysis cells (SOECs) is delamination of oxygen electrodes (OEs). The driving force for the electrode delamination could be the generated high inner oxygen pressure near the electrode-electrolyte interface during operation. However, the effects of transport properties and electrode thickness on the inner oxygen partial pressure are not well understood. Here, a microstructure-based electrochemical model which includes the conduction of electrons and oxygen ions coupled with Butler-Volmer-type chemical reactions at triple-phase-boundaries (TPBs), is employed to investigate the oxygen pressure in lanthanum strontium manganate (LSM)-based SOECs. The model is applied to both two-dimensional (2D) prototype microstructures and three-dimensional (3D) realistic microstructures, and the oxygen pressure is analyzed as a function of transport properties and electrode thickness under both potentiostatic and galvanostatic operations. The simulation results suggest strategies to suppress electrode delamination. The simulation results are compared to an analytical solution, and the discrepancies are attributed to the Butler-Volmer-type kinetics included in the microstructure-based model.
- 13 February 2023
- Published by Elsevier in Acta Materialia
- Vol. 248
Phase-field modeling of alloy oxidation at high temperatures
- 13 February 2023
- Published by Elsevier in Acta Materialia
- Vol. 248
Phase-field modeling of alloy oxidation at high temperatures
- 28 December 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 48 (26) , 9845-9860
Phase-field modeling of crack growth and mitigation in solid oxide cells
- 28 December 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 48 (26) , 9845-9860
Phase-field modeling of crack growth and mitigation in solid oxide cells
- Open Access
- 27 January 2022
- Published by Springer Nature in npj Computational Materials
- Vol. 8 (1) , 1-15
Phase-field framework with constraints and its applications to ductile fracture in polycrystals and fatigue
Modeling of ductile fracture in polycrystalline structures is challenging, since it requires integrated modeling of cracks, crystal plasticity, and grains. Here we extend the typical phase-field framework to the situations with constraints on the order parameters, and formulate two types of phase-field models on ductile fracture. The Type-I model incorporates three sets of order parameters, which describe the distributions of cracks, plastic strain, and grains, respectively. Crystal plasticity is employed within grain interiors accommodated by J2 plasticity at grain boundaries. The applications of the Type-I model to single crystals and bicrystals demonstrate the influences of grain orientations and grain boundaries on crack growth. In the Type-II model, J2 plasticity is assumed for the whole system and grain structures are neglected. Taking advantage of the efficiency of the fast Fourier transform, our Type-II model is employed to study low cycle fatigue. Crack closure and striation-like patterning of plastic strain are observed in the simulations. Crack growth rate is analyzed as a function of the J-integral, and the simulated fatigue life as a function of plastic strain agrees with the Coffin–Manson relation without a priori assumption.
- 27 January 2022
- Published by Springer Nature in npj Computational Materials
- Vol. 8 (1) , 1-15
Open AccessPhase-field framework with constraints and its applications to ductile fracture in polycrystals and fatigue
Modeling of ductile fracture in polycrystalline structures is challenging, since it requires integrated modeling of cracks, crystal plasticity, and grains. Here we extend the typical phase-field framework to the situations with constraints on the order parameters, and formulate two types of phase-field models on ductile fracture. The Type-I model incorporates three sets of order parameters, which describe the distributions of cracks, plastic strain, and grains, respectively. Crystal plasticity is employed within grain interiors accommodated by J2 plasticity at grain boundaries. The applications of the Type-I model to single crystals and bicrystals demonstrate the influences of grain orientations and grain boundaries on crack growth. In the Type-II model, J2 plasticity is assumed for the whole system and grain structures are neglected. Taking advantage of the efficiency of the fast Fourier transform, our Type-II model is employed to study low cycle fatigue. Crack closure and striation-like patterning of plastic strain are observed in the simulations. Crack growth rate is analyzed as a function of the J-integral, and the simulated fatigue life as a function of plastic strain agrees with the Coffin–Manson relation without a priori assumption.
- 24 January 2022
- Published by American Physical Society (APS) in Physical Review B
- Vol. 105 (1) , 014108
Stability and low-energy orientations of interphase boundaries in multiaxial ferroelectrics: Phase-field simulations
The coexistence of different ferroelectric phases enables the tunability of the macroscopic properties and extensive applications from piezoelectric transducers to nonvolatile memories. Here we develop a thermodynamic model to predict the stability and low-energy orientations of boundaries between different phases in ferroelectrics. Taking lead zirconate titanate and bismuth ferrite as two examples, we demonstrate that the low-energy orientations of interphase boundaries are largely determined by minimizing the electrostatic and elastic energies. Phase-field simulations are employed to analyze the competition between the interfacial energy and the electrostatic and elastic energies. Our simulation results demonstrate that the lowering of crystal symmetry could occur due to the electrical and mechanical incompatibilities between the two phases, which can be used to explain the experimentally observed low-symmetry phases near morphotropic phase boundaries. Our work provides theoretical foundations for understanding and controlling the interphase boundaries in ferroelectric materials for multifunctional applications.
- 24 January 2022
- Published by American Physical Society (APS) in Physical Review B
- Vol. 105 (1) , 014108
Stability and low-energy orientations of interphase boundaries in multiaxial ferroelectrics: Phase-field simulations
The coexistence of different ferroelectric phases enables the tunability of the macroscopic properties and extensive applications from piezoelectric transducers to nonvolatile memories. Here we develop a thermodynamic model to predict the stability and low-energy orientations of boundaries between different phases in ferroelectrics. Taking lead zirconate titanate and bismuth ferrite as two examples, we demonstrate that the low-energy orientations of interphase boundaries are largely determined by minimizing the electrostatic and elastic energies. Phase-field simulations are employed to analyze the competition between the interfacial energy and the electrostatic and elastic energies. Our simulation results demonstrate that the lowering of crystal symmetry could occur due to the electrical and mechanical incompatibilities between the two phases, which can be used to explain the experimentally observed low-symmetry phases near morphotropic phase boundaries. Our work provides theoretical foundations for understanding and controlling the interphase boundaries in ferroelectric materials for multifunctional applications.
- 1 December 2021
- Published by Elsevier in International Journal of Pressure Vessels and Piping
- Vol. 194, 104519
Atomistic simulation of [100](001) crack propagation with Cu precipitates in α-iron
- 1 December 2021
- Published by Elsevier in International Journal of Pressure Vessels and Piping
- Vol. 194, 104519
Atomistic simulation of [100](001) crack propagation with Cu precipitates in α-iron