YAYuuki Araga

Yuuki Araga

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yuuki Araga has a total of 60 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Demonstration of cone shaped Cu micro-bumps by nanoparticle deposition process

    by Yuuki Araga, Hiroshi Nakagawa, Haruo Shimamoto, Katsuya Kikuchi

    Cone shaped micro-bumps with Cu are successfully demonstrated with nanoparticle deposition process, which is previously used to deposit Au cone shaped bumps. The process employs helium gas to carry nanoparticles and sprays the nanoparticles onto patterned resist on target wafer. Then cone shaped bumps can be formed with self-forming by flow of the carrier gas. The paper presents formation process and basic characteristics of the bumps. The first integration result including electrical and mechanical characteristics are also presented.

  • (Invited) Direct Bonding and Its Interface for High-Density Integration of Superconducting Qubits

    by Masahisa Fujino, Yuuki Araga, Hiroshi Nakagawa, Katsuya Kikuchi, Noboru Miyata

    Superconducting qubits are one of the intensive approaches to fabricate quantum computing (QC). Qubits can be manufactured by the current Si-based semiconductor manufacturing processes. However, circuits should be superconducting material such as Nb (Tc=9.29 K), Al (Tc=1.18 K), Pb (Tc=7.2 K), In (Tc=3.4 K) , etc. In current technology, qubits are arranged in planar geometry in a chip, and each qubit should wire to control and read signal lines in the same plane. When a large number of qubits are integrated, these wires would be too constrained, and several problems would be actualized, such as wiring for qubits located at the chip center, crosstalk among wiring, and so on. The signal integrity for the QC devices is much better to have qubits at short distances from the control circuitry. Therefore, 3D wiring is required for a large-scale qubit integration. 3D integration of qubits with interposer chips by flip-chip bonding is the proof-of-concept of the large-scale qubit integration. The 3D integration approaches for qubit- based devices are the same as conventional electronic devices, including the through silicon via (TSV) process for interposers and micro bump flip-chip bonding. However, they use superconducting metals instead of copper and other non-superconducting materials. Most flip-chip microbump bonding processes require thermal compression at over 170 °C. Superconducting elements are easily degraded by heat. Consequently, we apply surface activated bonding (SAB) to a superconducting metal as a low-temperature bonding process for superconducting circuits. The test element group (TEG) for the current-voltage (I-V) measurement of the bonded interface was bonded by SAB method, and at the Nb SAB interface layer is a 2- to 3-nm-thick amorphous layer and the layer consist of Si-rich interfacial layer compared to the Nb bulk area. The bonding specimens were activated on jigs made of Si during the bonding process; then the Si sputtered by FAB was redeposited on the bonding surfaces. Furthermore, the bonded specimen was wired using Al wire to a chip carrier with a stage installed into a 0.3-K cryostat. As a result, the Tc of this path is 9.3 K, which is very similar to that of Nb bulk (9.2 K). However, a small step of the Tc at 9.1-9.4 K was also observed. (Fig.1) [1] In this study, we discuss the superconducting interface of direct bonded Nb-Nb by Tc, and also the interfacial structure measured by polarized neutron reflectometry (PNR). The results show clear spin asymmetry in the superconducting state, as splitting is observed in the fringes of the parallel neutron (neutron spins parallel to the external magnetic field 0.1 T) reflection R+ and the antiparallel (neutron spins antiparallel to it) reflection R−, where the latter has become larger. This well-known effect is related to the flux penetration in the superconducting state. Therefore, unique information about the superconducting state of the buried thin film can be measured by using the polarized neutron beam. For this project the major advantage of PNR will be to characterize the superconducting state at the deeply buried Nb interfaces, sandwiched between the two substrate wafers, which would be infeasible using alternate techniques. [1] M. Fujino, et. al., J. Appl. Phys., 133, 015301, 2023 Figure 1

  • Demonstration of 90 000 superconductive bump connections for massive quantum computing

    by Yuuki Araga, Hiroshi Nakagawa, Masaru Hashino, Katsuya Kikuchi

    We developed fabrication and bonding technology of superconductive bump for massive quantum computing. A bonded test vehicle demonstrates supercurrent through 90 000 series daisy-chain. Proposed bump consists of lead-indium alloy. The bumps land onto gold pad on the opposite chip and alloy with the gold pad for supercurrent. The primary advantage of the proposed bump is the minimized damage to the quantum chip. Plasma cleaning process which may degrade sensitive components is only required for bump chips and not for quantum chips. Lower bonding temperature of 100 degrees Celsius for the proposed bump also keeps sensitive components away from degradation in high temperature.


  • Nb–Nb direct bonding at room temperature for superconducting interconnects

    by Masahisa Fujino, Yuuki Araga, Hiroshi Nakagawa, Yuta Takahashi, Kenji Nanba, Ayami Yamaguchi, Akira Miyata, Takanori Nishi, Katsuya Kikuchi

    Superconducting devices with high-density integration are required for applications, such as high-performance detectors and quantum computing. Here, the direct bonding of Nb electrodes at room temperature using a surface activated bonding method was investigated. We directly bonded Nb bonding pads and then performed current–voltage measurements in a 3 He cryostat. A superconducting current of 1–5 mA was confirmed for the bonded interconnect. The transition temperature was 7.3–9.3 K. These values are affected by the quality of the bonding interface. According to cross-sectional transmission electron microscopy observations and energy-dispersive x-ray spectroscopy analysis of the bonding interface, the Nb layers were bonded with a 3-nm-thick intermediate layer made of Si and Nb between them. The Si sources were the bonding substrate and the bonding jig in the bonding apparatus.


  • Open Access

    In-Place Evaluation of Powering and Signaling Within Fan-Out Multiple IC Chip Packaging

    by Hiroki Sonoda, Ryo Kasai, Daisuke Tanaka, Yoshihide Murakami, Kyoshi Mihara, Yuuki Araga, Naoya Watanabe, Haruo Shimamoto, Katsuya Kikuchi, Takuji Miki, et al.

    This paper confirms the advantage of fan-out (FO) packaging in the electrical performance of power delivery among integrated circuit (IC) chips with the best use of land side capacitors (LSCs). On-chip in-place waveform measurements quantitatively evaluate the integrity of powering and signaling within FO wafer level packaging (FOWLP) multiple chip module (MCM) demonstrators, where a pair of IC chips are assembled with LSCs with different sizes and structures. The IC chip incorporates an array of 12 digital cores and on-chip waveform monitor (OCM) circuits. Each digital core consists of a low-voltage differential signaling (LVDS) transceiver channel that is backed by a static random access memory (SRAM) based built-in self test (BIST) module and supplied by an on-chip voltage regulator module (VRM). The LSCs are placed on the bottom side of an FO interposer and inserted between the output of VRM and the ground plane almost ideally with the shortest length of physical traces. A Si membrane capacitor of 10 nF sustains the lowest power line impedance over the frequency range of 2.0 GHz more constantly than a multi-layer ceramic counterpart, and attenuates the high order harmonic frequency components to the clocking frequency at 750 MHz. The leverage of LSCs in powering also improves signaling and helps achieve the wider eye openings in LVDS channels. The implications are elaborated for the capacitor selections with respect to the physical types of capacitors, the size of capacitances and the level of shares in power delivery among digital cores, all toward the higher level of integrity in powering and signaling in FOWLP MCMs.


  • Thermal management of a 3D packaging structure for superconducting quantum annealing machines

    by Wei Feng, Katsuya Kikuchi, Mutsuo Hidaka, Hirotake Yamamori, Yuuki Araga, Kazumasa Makise, Shiro Kawabata

    Quantum annealing (QA) is a computing paradigm for solving combinatorial optimization problems by finding the low-energy configurations of complicated Ising models through quantum fluctuation. Recently, because of the strictly limited number of superconducting qubits per chip, three-dimensional (3D) integrated technologies have attracted great attention for realizing a practical large-scale QA machine. Because a cryogenic environment is required for qubit chip operation, the less-effective heat transfer in the stacked structure has become a major concern. In the present paper, a method to realize a sufficiently low temperature for quantum operation in large-scale superconducting QA machines based on 3D packaging technology is proposed and demonstrated numerically. We reveal that the heating in such a 3D structure, which seriously reduces the quantum coherence of qubit chips, is effectively prevented by adding through-silicon vias (TSVs). Accordingly, the temperature of the qubit chip is drastically reduced from 57.8 mK to 16.4 mK. Our results indicate that using TSVs are a powerful and simple approach to realizing practical large-scale superconducting QA machines.


  • Open Access

    3-D CMOS Chip Stacking for Security ICs Featuring Backside Buried Metal Power Delivery Networks With Distributed Capacitance

    by Kazuki Monta, Hiroki Sonoda, Takaaki Okidono, Yuuki Araga, Naoya Watanabe, Haruo Shimamoto, Katsuya Kikuchi, Noriyuki Miura, Takuji Miki, Makoto Nagata

    3-D stacks of complimentary metal-oxide-semiconductor (CMOS) integrated circuit (IC) chips for security applications monolithically embed backside buried metal (BBM) routing with low series impedance and high decoupling capability in a power delivery network (PDN), thanks to distributed capacitances over a full-chip backside area. The 3-D Si demonstrator integrating cryptographic engines was fabricated in a 0.13-μm CMOS technology with post-Si wafer-level BBM Cu processing with 10, 15, and 10 μm of thickness, linewidth, and space, respectively, along with through Si vias (TSVs) with 10 and 40 μm of diameter and depth, respectively. The capacitance of 0.18 nF/mm 2 in the effective backside area of 71 mm 2 suppressed dynamic IR drops in 10% and 59% for the single chip and four chip stack samples, respectively, during the operation of a 3.9 M-gate crypto core at 30 MHz. On-chip power noise monitoring (OCM) was applied in these measurements. The 3-D BBM PDN also effectively reduces power side channel information leakage, which is evaluated by 14× increase in the number of externally observed electromagnetic (EM) noise waveforms to attain the t-test value of larger than 4.5.


  • Open Access

    Si-Backside Protection Circuits Against Physical Security Attacks on Flip-Chip Devices

    by Takuji Miki, Makoto Nagata, Hiroki Sonoda, Noriyuki Miura, Takaaki Okidono, Yuuki Araga, Naoya Watanabe, Haruo Shimamoto, Katsuya Kikuchi

    This article presents a cryptographic key protection technique from physical security attacks through Si-backside of IC chip. Flip-chip packaging leads to a serious security hole that allows emerging backside physical security attacks. The proposed backside buried metal (BBM) structure forming a meander wire pattern on the Si-backside detects unexpected disconnection of the meander and warns the malicious attempts to expose a vulnerable Si substrate. Moreover, the BBM meander also shields key information of cryptographic circuit from both passive side-channel attacks and active laser fault injection as well. Unlike other conventional laminate-based protection, this backside monolithic approach does not require frontside wiring resources or additional packaging layers, resulting in only 0.0025% size-overhead. The BBM meander was formed on the backside of a 0.13-μm CMOS cryptographic chip by wafer-level via-last BBM processing.


  • Electrostatic Shield TSVs to Suppress Coupling Among Stacked ICs

    by Yuuki Araga, Kikuchi Katsuya, Masahiro Aoyagi

    Multi chip modules (MCMs) employing three-dimensionally stacked ICs (3DS-ICs) are expected to be the integration method to achieve high performance by integrating memories and processors densely. In such a densely assembled modules, crosstalk between closely placed 3DS-ICs like a stacked memories and processors. In this study, we propose a shielding method using through-silicon vias (TSVs) to suppress stack-to-stack crosstalk, we created MCM model for 3-D electromagnetic solver and simulated result showed good noise suppression effect, simulation result also showed higher suppression ratio as larger number of stacked ICs.


  • A Thick Cu Layer Buried in Si Interposer Backside for Global Power Routing

    by Yuuki Araga, Makoto Nagata, Hiroaki Ikeda, Takuji Miki, Noriyuki Miura, Naoya Watanabe, Haruo Shimamoto, Katsuya Kikuchi

    A layer of thick Cu metal is buried in the backside of a Si interposer and provides low resistivity and high capacitance for high performance on-die power delivery networks (PDNs). The backside buried metal (BBM) layer can be as thick as 10 μm or even larger, and the stripes formed on the layer for interleaving power supply (VDD) and ground (VSS) wirings have large cross sectional areas. The process flow developed for BBM is fully compatible with via-last type through-silicon via (TSV) manufacturing. The Si interposer with BBM is stacked over an integrated circuit (IC) chip for improving PDN performance and suppressing power supply noise, as an over-the-top Si interposer (OVTT-SiIP.) A test device of 65-nm CMOS digital IC chip and OVTT-SiIP was manufactured. The noise suppression ratio of 59.6% by the OVTT-SiIP technology is demonstrated by simulation with a full-chip PDN equivalent circuit network model, and consistent with 49.7% by measurements on the test device with on-chip power noise monitoring function.