Riccardo Bacci di Capaci
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Riccardo Bacci di Capaci has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
Claudio Scali
Department of Civil and Industrial Engineering, University of Pisa, Largo Lucio Lazzarino 2, 561226, Pisa, Italy
10 shared publications- Gabriele Pannocchia
Department of Civil and Industrial Engineering, University of Pisa, Pisa, Italy
8 shared publications - Marco Vaccari
Department of Civil and Industrial Engineering, University of Pisa, 56122 Pisa, Pisa, Italy
6 shared publications Gabriele Pannocchia
5 shared publications- Elisabetta Brunazzi
Dipartimento di Ingegneria Civile e Industriale, University of Pisa, 56122 Pisa, Italy
4 shared publications Leonardo Tognotti
Department of Civil and Industrial Engineering, University of Pisa, 56122 Pisa, Italy
4 shared publications
Latest Publications
- Open Access
Two-Scale Heterogeneous Packed-Bed Reactor Modeling for Chloromethanes Hydrodechlorination over Pd- and Ir-Based Catalysts: From Kinetic Model Identification to Pilot-Scale Reactor Design
Catalytic hydrodechlorination (HDC) is a promising approach for the sustainable valorization of chloromethane by-product streams into valuable chloromethanes. However, the design and optimization of HDC reactors remain challenging because reaction kinetics, transport phenomena, and catalyst behavior interact across both reactor and catalyst particle scales. Reliable predictive tools are therefore highly needed to support process development and scale-up. In this work, a comprehensive multiscale packed-bed reactor model is developed by coupling reactor-scale mass, energy, and momentum balances with intraparticle transport and catalyst-specific reaction kinetics identified from laboratory-scale fixed-bed experiments. Dedicated kinetic models for palladium- and iridium-based catalysts are obtained through systematic kinetic model discrimination and nonlinear parameter estimation. For the Pd catalyst, the framework is further extended by incorporating a time-dependent deactivation model calibrated against time-on-stream experiments, enabling the prediction of catalyst activity loss under operating conditions. The resulting framework reproduces the experimental behavior of both catalytic systems, accurately capturing conversion, product distribution, outlet temperature, and, for the Pd catalyst, the evolution of catalyst activity over time. The model, validated against experimental data at laboratory scale, is subsequently applied to a pilot-scale reactor, illustrating its potential as a predictive tool for reactor analysis across different operating scales and for applications relevant to process development and scale-up. Overall, the proposed methodology provides an experimentally grounded predictive framework for catalyst assessment, reactor design, and process optimization, while offering a flexible basis for reactor scale-up and further refinement as additional experimental data become available.
Open AccessTwo-Scale Heterogeneous Packed-Bed Reactor Modeling for Chloromethanes Hydrodechlorination over Pd- and Ir-Based Catalysts: From Kinetic Model Identification to Pilot-Scale Reactor Design
Catalytic hydrodechlorination (HDC) is a promising approach for the sustainable valorization of chloromethane by-product streams into valuable chloromethanes. However, the design and optimization of HDC reactors remain challenging because reaction kinetics, transport phenomena, and catalyst behavior interact across both reactor and catalyst particle scales. Reliable predictive tools are therefore highly needed to support process development and scale-up. In this work, a comprehensive multiscale packed-bed reactor model is developed by coupling reactor-scale mass, energy, and momentum balances with intraparticle transport and catalyst-specific reaction kinetics identified from laboratory-scale fixed-bed experiments. Dedicated kinetic models for palladium- and iridium-based catalysts are obtained through systematic kinetic model discrimination and nonlinear parameter estimation. For the Pd catalyst, the framework is further extended by incorporating a time-dependent deactivation model calibrated against time-on-stream experiments, enabling the prediction of catalyst activity loss under operating conditions. The resulting framework reproduces the experimental behavior of both catalytic systems, accurately capturing conversion, product distribution, outlet temperature, and, for the Pd catalyst, the evolution of catalyst activity over time. The model, validated against experimental data at laboratory scale, is subsequently applied to a pilot-scale reactor, illustrating its potential as a predictive tool for reactor analysis across different operating scales and for applications relevant to process development and scale-up. Overall, the proposed methodology provides an experimentally grounded predictive framework for catalyst assessment, reactor design, and process optimization, while offering a flexible basis for reactor scale-up and further refinement as additional experimental data become available.
- Open Access
Emerging Approaches for Dechlorination of Plastic Waste Prior to Thermochemical Recycling: A Comprehensive Review
The increasing generation of plastic waste has intensified the search for sustainable recycling technologies capable of recovering valuable resources while minimizing environmental impacts. Among emerging solutions, thermochemical recycling processes such as pyrolysis, gasification, and hydrothermal liquefaction have gained significant attention. However, the presence of chlorine-containing polymers, particularly poly(vinyl chloride) (PVC), represents a major challenge due to the release of hydrogen chloride (HCl), catalyst deactivation, equipment corrosion, and contamination of valuable products. Consequently, effective dechlorination pretreatments are essential for improving process performance and product quality. This review provides a comprehensive overview of current pretreatment technologies for chlorine management in plastic solid waste. Mechanical sorting, density-based separation, chemical extraction, alkaline treatments, hydrothermal processing, thermal dehydrochlorination, catalytic methods, and emerging photocatalytic approaches are critically analyzed and compared. The mechanisms, operating conditions, chlorine removal efficiencies, technological readiness levels, and industrial applicability of each method are discussed. Moreover, particular attention will be devoted to integrating different pretreatment technologies to achieve an overall enhanced chlorine removal efficiency before thermochemical technologies. Finally, reported techno-economic, environmental, and safety indicators are compared where quantitative data are available, while the principal data gaps and technological barriers to large-scale implementation are identified.
Open AccessEmerging Approaches for Dechlorination of Plastic Waste Prior to Thermochemical Recycling: A Comprehensive Review
The increasing generation of plastic waste has intensified the search for sustainable recycling technologies capable of recovering valuable resources while minimizing environmental impacts. Among emerging solutions, thermochemical recycling processes such as pyrolysis, gasification, and hydrothermal liquefaction have gained significant attention. However, the presence of chlorine-containing polymers, particularly poly(vinyl chloride) (PVC), represents a major challenge due to the release of hydrogen chloride (HCl), catalyst deactivation, equipment corrosion, and contamination of valuable products. Consequently, effective dechlorination pretreatments are essential for improving process performance and product quality. This review provides a comprehensive overview of current pretreatment technologies for chlorine management in plastic solid waste. Mechanical sorting, density-based separation, chemical extraction, alkaline treatments, hydrothermal processing, thermal dehydrochlorination, catalytic methods, and emerging photocatalytic approaches are critically analyzed and compared. The mechanisms, operating conditions, chlorine removal efficiencies, technological readiness levels, and industrial applicability of each method are discussed. Moreover, particular attention will be devoted to integrating different pretreatment technologies to achieve an overall enhanced chlorine removal efficiency before thermochemical technologies. Finally, reported techno-economic, environmental, and safety indicators are compared where quantitative data are available, while the principal data gaps and technological barriers to large-scale implementation are identified.
- 1 September 2026
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 234, 112-125
Physics-guided multi-fidelity soft sensing for online analyzer consistency monitoring
- 1 September 2026
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 234, 112-125
Physics-guided multi-fidelity soft sensing for online analyzer consistency monitoring
- 13 April 2026
- Published by Elsevier in Computers & Chemical Engineering
- Vol. 211
Data-based multi-fidelity modeling for online sensors correction
- 13 April 2026
- Published by Elsevier in Computers & Chemical Engineering
- Vol. 211
Data-based multi-fidelity modeling for online sensors correction
- Open Access
Advancing Industrial Automation: Highlights from Recent Research
Industries today face several challenges due to rapidly evolving market demands, stringent environmental regulations, and the growing integration of renewable energy sources
Open AccessAdvancing Industrial Automation: Highlights from Recent Research
Industries today face several challenges due to rapidly evolving market demands, stringent environmental regulations, and the growing integration of renewable energy sources
- Open Access
Advanced Methods for Monitoring and Fault Diagnosis of Control Loops in Common Rail Systems
Common rail systems are a key component of modern diesel engines and highly increase their performance. During their working lifetime, there could be critical damages or failures related to aging, like backlash or friction, or out-of-spec operating conditions, like low-quality fuel with, e.g., the presence of water or particles or a high percentage of biodiesel. In this work, suitable data-driven methods are adopted to develop an automatic procedure to monitor, diagnose, and estimate some types of faults in common rail systems. In particular, the pressure control loop operating within the engine control unit is investigated; the system is described using a Hammerstein model composed of a nonlinear model for the control valve behavior and an extended linear model for the process dynamics, which also accounts for the presence of external disturbances. Three different sources of oscillations can be successfully detected and quantified: valve stiction, aggressive controller tuning, and external disturbance. Selected case studies are used to demonstrate the effectiveness of the developed methodology.
Open AccessAdvanced Methods for Monitoring and Fault Diagnosis of Control Loops in Common Rail Systems
Common rail systems are a key component of modern diesel engines and highly increase their performance. During their working lifetime, there could be critical damages or failures related to aging, like backlash or friction, or out-of-spec operating conditions, like low-quality fuel with, e.g., the presence of water or particles or a high percentage of biodiesel. In this work, suitable data-driven methods are adopted to develop an automatic procedure to monitor, diagnose, and estimate some types of faults in common rail systems. In particular, the pressure control loop operating within the engine control unit is investigated; the system is described using a Hammerstein model composed of a nonlinear model for the control valve behavior and an extended linear model for the process dynamics, which also accounts for the presence of external disturbances. Three different sources of oscillations can be successfully detected and quantified: valve stiction, aggressive controller tuning, and external disturbance. Selected case studies are used to demonstrate the effectiveness of the developed methodology.
- 23 July 2023
- Published by Elsevier in Computers & Chemical Engineering
- Vol. 178
Data driven performance monitoring and retuning using PID controllers
- 23 July 2023
- Published by Elsevier in Computers & Chemical Engineering
- Vol. 178
Data driven performance monitoring and retuning using PID controllers
- Open Access
- 4 May 2023
- Published by MDPI AG in Chemengineering
- Vol. 7 (3) , 44
An Integrated Approach to the Hydrothermal Carbonization of Sewage Sludge: Simulation, Modeling, and Life Cycle Assessment
Sewage sludge management at wastewater treatment plants is becoming a more and more challenging task. Here, an innovative integrated modeling approach is developed to investigate the optimization of a municipal wastewater treatment plant (MWWTP) by the inclusion of hydrothermal carbonization (HTC). To this aim, two alternative plant layouts have been considered: (i) a conventional activated sludge-based treatment plant, i.e., based on thickening, stabilization, conditioning, and dewatering; (ii) additional hydrothermal carbonization and integrated treatment of the spent liquor in the sludge line. An Italian MWWTP has been selected as a case study, and three different scenarios have been implemented in the process simulation software World Wide Engine for Simulation Training and Automation (WEST) by considering the effect of the different digestion times in the aerobic reactor. Then, according to the Design of Experiment (DoE) methodology applied both on simulated and experimental data, and by the use of a Python code, the desired models have been developed and compared. Finally, a Life Cycle Assessment (LCA) study has been carried out to estimate the impacts on human health, ecosystems, and resources. The integration of HTC corresponds to the generation of a valuable product (the hydrochar), whereas the conventional layout is associated with high disposal costs of the sewage sludge. According to LCA results, a sludge age of 40 days is recommended due to the lowest impacts estimated, both with and without a HTC section. This has been ascribed mainly to the electricity demand of the sludge line, which increases with the excess sludge flow rate, i.e., as the sludge age decreases.
- 4 May 2023
- Published by MDPI AG in Chemengineering
- Vol. 7 (3) , 44
Open AccessAn Integrated Approach to the Hydrothermal Carbonization of Sewage Sludge: Simulation, Modeling, and Life Cycle Assessment
Sewage sludge management at wastewater treatment plants is becoming a more and more challenging task. Here, an innovative integrated modeling approach is developed to investigate the optimization of a municipal wastewater treatment plant (MWWTP) by the inclusion of hydrothermal carbonization (HTC). To this aim, two alternative plant layouts have been considered: (i) a conventional activated sludge-based treatment plant, i.e., based on thickening, stabilization, conditioning, and dewatering; (ii) additional hydrothermal carbonization and integrated treatment of the spent liquor in the sludge line. An Italian MWWTP has been selected as a case study, and three different scenarios have been implemented in the process simulation software World Wide Engine for Simulation Training and Automation (WEST) by considering the effect of the different digestion times in the aerobic reactor. Then, according to the Design of Experiment (DoE) methodology applied both on simulated and experimental data, and by the use of a Python code, the desired models have been developed and compared. Finally, a Life Cycle Assessment (LCA) study has been carried out to estimate the impacts on human health, ecosystems, and resources. The integration of HTC corresponds to the generation of a valuable product (the hydrochar), whereas the conventional layout is associated with high disposal costs of the sewage sludge. According to LCA results, a sludge age of 40 days is recommended due to the lowest impacts estimated, both with and without a HTC section. This has been ascribed mainly to the electricity demand of the sludge line, which increases with the excess sludge flow rate, i.e., as the sludge age decreases.
- Open Access
- 22 April 2023
- Published by Elsevier in Journal of Cleaner Production
- Vol. 410
Enhancing sustainability of acid gas treatment in a Waste-to-Energy plant via Model Predictive Control
- 22 April 2023
- Published by Elsevier in Journal of Cleaner Production
- Vol. 410
Open AccessEnhancing sustainability of acid gas treatment in a Waste-to-Energy plant via Model Predictive Control
- 2 January 2023
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 101 (7) , 4230-4243
A continuous flow reactor for the flexible production of different formulations: CFD‐aided design
- 2 January 2023
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 101 (7) , 4230-4243
A continuous flow reactor for the flexible production of different formulations: CFD‐aided design