Michael Luebben
Michael Luebben has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Ilia Valov
Peter Grünberg Institute 7 (PGI‐7) Forschungszentrum Jülich Jülich Germany
15 shared publications - Rainer Waser
Peter-Grnberg-Institut 7 (PGI-7), Forschungszentrum Jlich GmbH, Jlich, Germany
7 shared publications - Deok-Yong Cho
Department of Physics, Jeonbuk National University, Jeonju 54896, Republic of Korea
4 shared publications - Kug-Seung Lee
Pohang University of Science and Technology (POSTECH)
3 shared publications - Anja Wedig
Peter Gruenberg Institute, Research Centre Juelich, Juelich 52425, Germany
2 shared publications - Carlo Ricciardi
Department of Applied Science and Technology, Politecnico di Torino, Torino, Italy
2 shared publications
Latest Publications
- 28 April 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28 (19) , 11674-11679
Spectroscopic investigation of the structural and electronic properties of oxygen-deficient tantalum oxide thin films
Oxygen-deficient tantalum oxide (TaOx, x < 2.5) thin films are often used as switching films for memristors with various switching mechanisms. The ion transport (and related switching mechanism) and filament stability strongly depend on the chemical composition and structure of the films. In order to scrutinize the structure–property relationship, the local and electronic structures of TaOx thin films with various degrees of oxygen deficiencies (x = 1.0, 1.5, 2.1, and 2.5) are investigated by spectroscopic methods, including X-ray absorption spectroscopy and X-ray/ultraviolet photoelectron spectroscopy. To ensure the oxygen deficiency is accommodated as intended, the films are capped with Au layers in situ. The results of the analyses on the Ta valence, Ta–O bond characteristics, and electronic structure indicate that TaO1.0 is stable and metallic despite the oxidation. Meanwhile, TaOx with x ≥ 1.5 is almost fully coordinated by oxygen with a robust local structure, while the bond lengths and disorders are reduced gradually. The resemblance in the chemistry and electronic structure of TaO1.0 to the Ta metal (and of TaO2.1 to Ta2O5) implies that the intermediate chemical states in the Ta-TaOx heterojunction, though present, would not degrade the memristive functionality, accounting for the superior endurability of the Ta-based memristors.
- 28 April 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28 (19) , 11674-11679
Spectroscopic investigation of the structural and electronic properties of oxygen-deficient tantalum oxide thin films
Oxygen-deficient tantalum oxide (TaOx, x < 2.5) thin films are often used as switching films for memristors with various switching mechanisms. The ion transport (and related switching mechanism) and filament stability strongly depend on the chemical composition and structure of the films. In order to scrutinize the structure–property relationship, the local and electronic structures of TaOx thin films with various degrees of oxygen deficiencies (x = 1.0, 1.5, 2.1, and 2.5) are investigated by spectroscopic methods, including X-ray absorption spectroscopy and X-ray/ultraviolet photoelectron spectroscopy. To ensure the oxygen deficiency is accommodated as intended, the films are capped with Au layers in situ. The results of the analyses on the Ta valence, Ta–O bond characteristics, and electronic structure indicate that TaO1.0 is stable and metallic despite the oxidation. Meanwhile, TaOx with x ≥ 1.5 is almost fully coordinated by oxygen with a robust local structure, while the bond lengths and disorders are reduced gradually. The resemblance in the chemistry and electronic structure of TaO1.0 to the Ta metal (and of TaO2.1 to Ta2O5) implies that the intermediate chemical states in the Ta-TaOx heterojunction, though present, would not degrade the memristive functionality, accounting for the superior endurability of the Ta-based memristors.
- Open Access
- 29 March 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (14) , 18528-18536
Chemical Influence of Carbon Interface Layers in Metal/Oxide Resistive Switches
- 29 March 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (14) , 18528-18536
Open AccessChemical Influence of Carbon Interface Layers in Metal/Oxide Resistive Switches
- Open Access
- 14 October 2020
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (43) , 48773-48780
Water-Mediated Ionic Migration in Memristive Nanowires with a Tunable Resistive Switching Mechanism
Memristive devices based on electrochemical resistive switching effects have been proposed as promising candidates for in-memory computing and for the realization of artificial neural networks. Despite great efforts toward understanding the nanoionic processes underlying resistive switching phenomena, comprehension of the effect of competing redox processes on device functionalities from the materials perspective still represents a challenge. In this work, we experimentally and theoretically investigate the concurring reactions of silver and moisture and their impact on the electronic properties of a single-crystalline ZnO nanowire (NW). A decrease in electronic conductivity due to surface adsorption of moisture is observed, whereas, at the same time, water molecules reduce the energy barrier for Ag+ ion migration on the NW surface, facilitating the conductive filament formation. By controlling the relative humidity, the ratio of intrinsic electronic conductivity and surface ionic conductivity can be tuned to modulate the device performance. The results achieved on a single-crystalline memristive model system shed new light on the dual nature of the mechanism of how moisture affects resistive switching behavior in memristive devices.
- 14 October 2020
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (43) , 48773-48780
Open AccessWater-Mediated Ionic Migration in Memristive Nanowires with a Tunable Resistive Switching Mechanism
Memristive devices based on electrochemical resistive switching effects have been proposed as promising candidates for in-memory computing and for the realization of artificial neural networks. Despite great efforts toward understanding the nanoionic processes underlying resistive switching phenomena, comprehension of the effect of competing redox processes on device functionalities from the materials perspective still represents a challenge. In this work, we experimentally and theoretically investigate the concurring reactions of silver and moisture and their impact on the electronic properties of a single-crystalline ZnO nanowire (NW). A decrease in electronic conductivity due to surface adsorption of moisture is observed, whereas, at the same time, water molecules reduce the energy barrier for Ag+ ion migration on the NW surface, facilitating the conductive filament formation. By controlling the relative humidity, the ratio of intrinsic electronic conductivity and surface ionic conductivity can be tuned to modulate the device performance. The results achieved on a single-crystalline memristive model system shed new light on the dual nature of the mechanism of how moisture affects resistive switching behavior in memristive devices.
- Open Access
- 8 May 2020
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 6 (19) , eaaz9079
Design of defect-chemical properties and device performance in memristive systems
Impurities and dopants in memristive devices determine their switching kinetics, performance, and neuromorphic functionalities.
- 8 May 2020
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 6 (19) , eaaz9079
Open AccessDesign of defect-chemical properties and device performance in memristive systems
Impurities and dopants in memristive devices determine their switching kinetics, performance, and neuromorphic functionalities.
- 6 March 2019
- Published by Wiley in Advanced Electronic Materials
- Vol. 5 (9)
Active Electrode Redox Reactions and Device Behavior in ECM Type Resistive Switching Memories
Electrochemical metallization cells rely on oxidation, reduction, and migration of metal cations in nanoscale thin films. The cations are typically provided by the oxidation of the active electrode. Commonly, Cu, Ag, or their compounds are used as electrodes for injecting cations into solid electrolytes, such as Ta2O5 or SiO2. However, the used criteria are mainly based on empirical knowledge. In this work, different materials (Ag, Al, Au, Cu, Fe, Ni, Ta, Ti, V, and Zr) are investigated for active electrodes and their redox reactions are studied. It is found that the electrochemical behavior of the metals is crucial for the switching properties, as well as for filament stability and retention properties of the devices. The Gibbs free energy of formation of the cations is identified as crucial factor for selection criteria.
- 6 March 2019
- Published by Wiley in Advanced Electronic Materials
- Vol. 5 (9)
Active Electrode Redox Reactions and Device Behavior in ECM Type Resistive Switching Memories
Electrochemical metallization cells rely on oxidation, reduction, and migration of metal cations in nanoscale thin films. The cations are typically provided by the oxidation of the active electrode. Commonly, Cu, Ag, or their compounds are used as electrodes for injecting cations into solid electrolytes, such as Ta2O5 or SiO2. However, the used criteria are mainly based on empirical knowledge. In this work, different materials (Ag, Al, Au, Cu, Fe, Ni, Ta, Ti, V, and Zr) are investigated for active electrodes and their redox reactions are studied. It is found that the electrochemical behavior of the metals is crucial for the switching properties, as well as for filament stability and retention properties of the devices. The Gibbs free energy of formation of the cations is identified as crucial factor for selection criteria.
- Open Access
- 4 December 2018
- Published by Springer Nature in Nature Communications
- Vol. 9 (1) , 1-10
Self-limited single nanowire systems combining all-in-one memristive and neuromorphic functionalities
The ability for artificially reproducing human brain type signals’ processing is one of the main challenges in modern information technology, being one of the milestones for developing global communicating networks and artificial intelligence. Electronic devices termed memristors have been proposed as effective artificial synapses able to emulate the plasticity of biological counterparts. Here we report for the first time a single crystalline nanowire based model system capable of combining all memristive functions – non-volatile bipolar memory, multilevel switching, selector and synaptic operations imitating Ca2+ dynamics of biological synapses. Besides underlying common electrochemical fundamentals of biological and artificial redox-based synapses, a detailed analysis of the memristive mechanism revealed the importance of surfaces and interfaces in crystalline materials. Our work demonstrates the realization of self-assembled, self-limited devices feasible for implementation via bottom up approach, as an attractive solution for the ultimate system miniaturization needed for the hardware realization of brain-inspired systems.
- 4 December 2018
- Published by Springer Nature in Nature Communications
- Vol. 9 (1) , 1-10
Open AccessSelf-limited single nanowire systems combining all-in-one memristive and neuromorphic functionalities
The ability for artificially reproducing human brain type signals’ processing is one of the main challenges in modern information technology, being one of the milestones for developing global communicating networks and artificial intelligence. Electronic devices termed memristors have been proposed as effective artificial synapses able to emulate the plasticity of biological counterparts. Here we report for the first time a single crystalline nanowire based model system capable of combining all memristive functions – non-volatile bipolar memory, multilevel switching, selector and synaptic operations imitating Ca2+ dynamics of biological synapses. Besides underlying common electrochemical fundamentals of biological and artificial redox-based synapses, a detailed analysis of the memristive mechanism revealed the importance of surfaces and interfaces in crystalline materials. Our work demonstrates the realization of self-assembled, self-limited devices feasible for implementation via bottom up approach, as an attractive solution for the ultimate system miniaturization needed for the hardware realization of brain-inspired systems.
- 7 June 2018
- Published by Wiley in Advanced Materials
- Vol. 30 (29) , e1800957
Oxygen Exchange Processes between Oxide Memristive Devices and Water Molecules
Resistive switching based on transition metal oxide memristive devices is suspected to be caused by the electric‐field‐driven motion and internal redistribution of oxygen vacancies. Deriving the detailed mechanistic picture of the switching process is complicated, however, by the frequently observed influence of the surrounding atmosphere. Specifically, the presence or absence of water vapor in the atmosphere has a strong impact on the switching properties, but the redox reactions between water and the active layer have yet to be clarified. To investigate the role of oxygen and water species during resistive switching in greater detail, isotope labeling experiments in a N2/H218O tracer gas atmosphere combined with time‐of‐flight secondary‐ion mass spectrometry are used. It is explicitly demonstrated that during the RESET operation in resistive switching SrTiO3‐based memristive devices, oxygen is incorporated directly from water molecules or oxygen molecules into the active layer. In humid atmospheres, the reaction pathway via water molecules predominates. These findings clearly resolve the role of humidity as both oxidizing agent and source of protonic defects during the RESET operation.
- 7 June 2018
- Published by Wiley in Advanced Materials
- Vol. 30 (29) , e1800957
Oxygen Exchange Processes between Oxide Memristive Devices and Water Molecules
Resistive switching based on transition metal oxide memristive devices is suspected to be caused by the electric‐field‐driven motion and internal redistribution of oxygen vacancies. Deriving the detailed mechanistic picture of the switching process is complicated, however, by the frequently observed influence of the surrounding atmosphere. Specifically, the presence or absence of water vapor in the atmosphere has a strong impact on the switching properties, but the redox reactions between water and the active layer have yet to be clarified. To investigate the role of oxygen and water species during resistive switching in greater detail, isotope labeling experiments in a N2/H218O tracer gas atmosphere combined with time‐of‐flight secondary‐ion mass spectrometry are used. It is explicitly demonstrated that during the RESET operation in resistive switching SrTiO3‐based memristive devices, oxygen is incorporated directly from water molecules or oxygen molecules into the active layer. In humid atmospheres, the reaction pathway via water molecules predominates. These findings clearly resolve the role of humidity as both oxidizing agent and source of protonic defects during the RESET operation.
- 6 December 2017
- Published by Wiley in Advanced Electronic Materials
- Vol. 4 (1)
Processes and Effects of Oxygen and Moisture in Resistively Switching TaOx and HfOx
Foreign components such as dopants and impurities in molecular or ionic form may significantly influence forming/switching processes in redox‐based memories. This work presents a systematic study and discussion on effects of oxygen and moisture in Ta2O5 and HfO2 thin films, being two of the most used materials for redox‐based resistively switching random access memories. Whereas oxygen is found to not affect the device behavior, the presence of moisture profoundly influences it. It plays a crucial role for the counter electrode reaction, providing additional charged species and enabling the formation of oxygen vacancies, thus determining the forming voltage and the kinetics of this process. Here, methods for incorporation of moisture within the oxide films and its defect chemistry are discussed. Based on the standard electrode potentials and analysis of the electrochemical processes at both electrodes, it is possible to predict their sequence during switching. The difference using symmetric cells with inert electrodes Pt/MeOx/Pt and asymmetric devices with ohmic electrodes Me/MeOx/Pt is explained by the electrochemical reaction sequence and ability of the ohmic electrode to undergo redox reactions. Upon oxidation the Me electrode can either exchange O2− with the oxide or can be a source for cations within the MeOx, keeping the balance between oxygen rich/deficient matrix.
- 6 December 2017
- Published by Wiley in Advanced Electronic Materials
- Vol. 4 (1)
Processes and Effects of Oxygen and Moisture in Resistively Switching TaOx and HfOx
Foreign components such as dopants and impurities in molecular or ionic form may significantly influence forming/switching processes in redox‐based memories. This work presents a systematic study and discussion on effects of oxygen and moisture in Ta2O5 and HfO2 thin films, being two of the most used materials for redox‐based resistively switching random access memories. Whereas oxygen is found to not affect the device behavior, the presence of moisture profoundly influences it. It plays a crucial role for the counter electrode reaction, providing additional charged species and enabling the formation of oxygen vacancies, thus determining the forming voltage and the kinetics of this process. Here, methods for incorporation of moisture within the oxide films and its defect chemistry are discussed. Based on the standard electrode potentials and analysis of the electrochemical processes at both electrodes, it is possible to predict their sequence during switching. The difference using symmetric cells with inert electrodes Pt/MeOx/Pt and asymmetric devices with ohmic electrodes Me/MeOx/Pt is explained by the electrochemical reaction sequence and ability of the ohmic electrode to undergo redox reactions. Upon oxidation the Me electrode can either exchange O2− with the oxide or can be a source for cations within the MeOx, keeping the balance between oxygen rich/deficient matrix.
- 30 May 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (22) , 19287-19295
Interfacial Metal–Oxide Interactions in Resistive Switching Memories
Metal oxides are commonly used as electrolytes for redox-based resistive switching memories. In most cases, non-noble metals are directly deposited as ohmic electrodes. We demonstrate that irrespective of bulk thermodynamics predictions an intermediate oxide film a few nanometers in thickness is always formed at the metal/insulator interface, and this layer significantly contributes to the development of reliable switching characteristics. We have tested metal electrodes and metal oxides mostly used for memristive devices, that is, Ta, Hf, and Ti and Ta2O5, HfO2, and SiO2. Intermediate oxide layers are always formed at the interfaces, whereas only the rate of the electrode oxidation depends on the oxygen affinity of the metal and the chemical stability of the oxide matrix. Device failure is associated with complete transition of short-range order to a more disordered main matrix structure.
- 30 May 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (22) , 19287-19295
Interfacial Metal–Oxide Interactions in Resistive Switching Memories
Metal oxides are commonly used as electrolytes for redox-based resistive switching memories. In most cases, non-noble metals are directly deposited as ohmic electrodes. We demonstrate that irrespective of bulk thermodynamics predictions an intermediate oxide film a few nanometers in thickness is always formed at the metal/insulator interface, and this layer significantly contributes to the development of reliable switching characteristics. We have tested metal electrodes and metal oxides mostly used for memristive devices, that is, Ta, Hf, and Ti and Ta2O5, HfO2, and SiO2. Intermediate oxide layers are always formed at the interfaces, whereas only the rate of the electrode oxidation depends on the oxygen affinity of the metal and the chemical stability of the oxide matrix. Device failure is associated with complete transition of short-range order to a more disordered main matrix structure.
- 16 March 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (12) , 10820-10824
Direct Probing of the Dielectric Scavenging-Layer Interface in Oxide Filamentary-Based Valence Change Memory
A great improvement in valence change memory performance has been recently achieved by adding another metallic layer to the simple metal–insulator–metal (MIM) structure. This metal layer is often referred to as oxygen exchange layer (OEL) and is introduced between one of the electrodes and the oxide. The OEL is believed to induce a distributed reservoir of defects at the metal–insulator interface thus providing an unlimited availability of building blocks for the conductive filament (CF). However, its role remains elusive and controversial owing to the difficulties to probe the interface between the OEL and the CF. Here, using Scalpel SPM we probe multiple functions of the OEL which have not yet been directly measured, for two popular VCMs material systems: Hf/HfO2 and Ta/Ta2O5. We locate and characterize in three-dimensions the volume containing the oxygen exchange layer and the CF with nanometer lateral resolution. We demonstrate that the OEL induces a thermodynamic barrier for the CF and estimate the minimum thickness of the OEL/oxide interface to guarantee the proper switching operations is ca. 3 nm. Our experimental observations are combined to first-principles thermodynamics and defect kinetics to elucidate the role of the OEL for device optimization.
- 16 March 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (12) , 10820-10824
Direct Probing of the Dielectric Scavenging-Layer Interface in Oxide Filamentary-Based Valence Change Memory
A great improvement in valence change memory performance has been recently achieved by adding another metallic layer to the simple metal–insulator–metal (MIM) structure. This metal layer is often referred to as oxygen exchange layer (OEL) and is introduced between one of the electrodes and the oxide. The OEL is believed to induce a distributed reservoir of defects at the metal–insulator interface thus providing an unlimited availability of building blocks for the conductive filament (CF). However, its role remains elusive and controversial owing to the difficulties to probe the interface between the OEL and the CF. Here, using Scalpel SPM we probe multiple functions of the OEL which have not yet been directly measured, for two popular VCMs material systems: Hf/HfO2 and Ta/Ta2O5. We locate and characterize in three-dimensions the volume containing the oxygen exchange layer and the CF with nanometer lateral resolution. We demonstrate that the OEL induces a thermodynamic barrier for the CF and estimate the minimum thickness of the OEL/oxide interface to guarantee the proper switching operations is ca. 3 nm. Our experimental observations are combined to first-principles thermodynamics and defect kinetics to elucidate the role of the OEL for device optimization.