Spencer E. Taylor
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Spencer E. Taylor has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
Marc Jones
2 shared publicationsValeska Gonzalez
Centre for Petroleum and Surface Chemistry, Department of Chemistry, University of Surrey, Guildford, Surrey GU2 7XH, UK
2 shared publications- Xin Yi Ong
Department of Chemical and Process Engineering, University of Surrey, Guildford GU2 7XH, United Kingdom
2 shared publications Alastair G. Smith
Shell Global Solutions (U.K.), Shell Technology Centre, Thornton, PO Box 1, Chester, CH1 3SH, United Kingdom
1 shared publicationAlisdair Q. Clark
Air BP Ltd., Sunbury Business Park, Sunbury-on-Thames, Middlesex, TW16 7LN, United Kingdom
1 shared publicationAndrea Fortini
Department of Physics, University of Surrey , Guildford, Surrey GU2 7XH, United Kingdom
1 shared publication
Latest Publications
- Open Access
- 9 June 2026
- Published by MDPI AG in Colloids and Interfaces
- Vol. 10 (3) , 45
Editorial for a New Section: Application of Colloids and Interfacial Aspects
Colloidal systems and interfacial phenomena underpin a multitude of applied technologies through their ability to control the evolution and interactions of dispersed phases
- 9 June 2026
- Published by MDPI AG in Colloids and Interfaces
- Vol. 10 (3) , 45
Open AccessEditorial for a New Section: Application of Colloids and Interfacial Aspects
Colloidal systems and interfacial phenomena underpin a multitude of applied technologies through their ability to control the evolution and interactions of dispersed phases
- 1 July 2021
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 171, 293-304
Detection of dispersed water droplets in petroleum liquids using a capacitance sensor
- 1 July 2021
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 171, 293-304
Detection of dispersed water droplets in petroleum liquids using a capacitance sensor
- Open Access
- 14 October 2020
- Published by MDPI AG in Colloids and Interfaces
- Vol. 4 (4) , 44
Electrical Conductivity and Viscosity in Binary Organic Liquid Mixtures: Participation of Molecular Interactions and Nanodomains
The present work aims to shed light on recent literature reports suggesting that ionic species are implicated in the electrical conductivity of 1-octanol and its mixtures with hydrocarbons. Other workers have questioned this interpretation, and herein, based on new experimentation and with reference to various literature studies, we consider that molecular interactions are more likely to be responsible. To investigate this, we have studied mixtures of 1-octanol and either silicone oil (SO) or n-dodecane as nonpolar components, using dielectric (in particular electrical conductivity) and viscometric measurements. With reference to the literature, the self-association of alcohols is known to create microheterogeneity in the neat liquids and in mixtures with nonpolar, low dielectric constant liquids, and it has previously been considered to be responsible for the particular solvent properties of alcohols. The present results suggest that the electrical conductivity of alkane/alcohol systems may have similar origins, with percolating pathways formed from octanol-rich nanodomains comprising polar regions containing hydrogen-bonded hydroxyl groups and nonpolar regions dominated by alkyl chains. The percolation threshold found for dodecane/octanol mixtures, in which interactions between the component molecules are found from viscosity measurements to be repulsive, agrees well with results from experimental and theoretical studies of disordered arrangements of packed spheres, and moreover, it is consistent with other published alkane/alcohol results. On the other hand, the situation is more complex for SO/octanol mixtures, in which interactions between the two components are attractive, based on viscosity data, and in which the phase separation of SO occurs at high octanol concentrations. Overall, we have concluded that electrical conductivity in octanol (and potentially all liquid alcohols) and its mixtures with nonpolar molecules, such as alkanes, is consistent with the presence of conducting networks comprising octanol-rich nanodomains formed by self-association, and not as a result of ionic conduction.
- 14 October 2020
- Published by MDPI AG in Colloids and Interfaces
- Vol. 4 (4) , 44
Open AccessElectrical Conductivity and Viscosity in Binary Organic Liquid Mixtures: Participation of Molecular Interactions and Nanodomains
The present work aims to shed light on recent literature reports suggesting that ionic species are implicated in the electrical conductivity of 1-octanol and its mixtures with hydrocarbons. Other workers have questioned this interpretation, and herein, based on new experimentation and with reference to various literature studies, we consider that molecular interactions are more likely to be responsible. To investigate this, we have studied mixtures of 1-octanol and either silicone oil (SO) or n-dodecane as nonpolar components, using dielectric (in particular electrical conductivity) and viscometric measurements. With reference to the literature, the self-association of alcohols is known to create microheterogeneity in the neat liquids and in mixtures with nonpolar, low dielectric constant liquids, and it has previously been considered to be responsible for the particular solvent properties of alcohols. The present results suggest that the electrical conductivity of alkane/alcohol systems may have similar origins, with percolating pathways formed from octanol-rich nanodomains comprising polar regions containing hydrogen-bonded hydroxyl groups and nonpolar regions dominated by alkyl chains. The percolation threshold found for dodecane/octanol mixtures, in which interactions between the component molecules are found from viscosity measurements to be repulsive, agrees well with results from experimental and theoretical studies of disordered arrangements of packed spheres, and moreover, it is consistent with other published alkane/alcohol results. On the other hand, the situation is more complex for SO/octanol mixtures, in which interactions between the two components are attractive, based on viscosity data, and in which the phase separation of SO occurs at high octanol concentrations. Overall, we have concluded that electrical conductivity in octanol (and potentially all liquid alcohols) and its mixtures with nonpolar molecules, such as alkanes, is consistent with the presence of conducting networks comprising octanol-rich nanodomains formed by self-association, and not as a result of ionic conduction.
- 1 June 2020
- Published by Elsevier in Powder Technology
- Vol. 371, 142-153
Rehydration of food powders: Interplay between physical properties and process conditions
- 1 June 2020
- Published by Elsevier in Powder Technology
- Vol. 371, 142-153
Rehydration of food powders: Interplay between physical properties and process conditions
- 14 November 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 7 (48) , 7744-7755
Antibacterial silver-doped phosphate-based glasses prepared by coacervation
Phosphate-based glasses are materials of great interest for the regeneration and repair of damaged hard or soft tissues. They have the desirable property of slowly dissolving in the physiological environment, eventually being totally replaced by regenerated tissue. Being bioresorbable, they can simultaneously induce tissue regeneration and deliver therapeutic agents (e.g. antibacterial ions) in a controlled way. In this work, we have synthesised a series of glasses in the P2O5–CaO–Na2O system doped with Ag2O using the coacervation method. The addition of silver is known to provide the glass with antibacterial properties due to the release of Ag+ ions into the body fluid. The coacervation method is a facile, water-based technique which offers significant advantages over the conventional melt-quench route for preparing phosphate-based glasses which requires melting of metal oxide powders at high temperatures (1000–1200 °C). The properties of the initial colloidal polyphosphate systems (coacervates) as a function of the Ag2O content were characterised using rheology and liquid state 31P NMR. The effect of Ag+ addition on the final dried glasses was investigated using thermal analysis, Raman spectroscopy and X-ray diffraction. The antibacterial activity was assessed against Staphylococcus aureus (S. aureus), a bacterial strain commonly found in post-surgery infections. A dose-dependent antimicrobial effect was seen with an increasing silver content.
- 14 November 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 7 (48) , 7744-7755
Antibacterial silver-doped phosphate-based glasses prepared by coacervation
Phosphate-based glasses are materials of great interest for the regeneration and repair of damaged hard or soft tissues. They have the desirable property of slowly dissolving in the physiological environment, eventually being totally replaced by regenerated tissue. Being bioresorbable, they can simultaneously induce tissue regeneration and deliver therapeutic agents (e.g. antibacterial ions) in a controlled way. In this work, we have synthesised a series of glasses in the P2O5–CaO–Na2O system doped with Ag2O using the coacervation method. The addition of silver is known to provide the glass with antibacterial properties due to the release of Ag+ ions into the body fluid. The coacervation method is a facile, water-based technique which offers significant advantages over the conventional melt-quench route for preparing phosphate-based glasses which requires melting of metal oxide powders at high temperatures (1000–1200 °C). The properties of the initial colloidal polyphosphate systems (coacervates) as a function of the Ag2O content were characterised using rheology and liquid state 31P NMR. The effect of Ag+ addition on the final dried glasses was investigated using thermal analysis, Raman spectroscopy and X-ray diffraction. The antibacterial activity was assessed against Staphylococcus aureus (S. aureus), a bacterial strain commonly found in post-surgery infections. A dose-dependent antimicrobial effect was seen with an increasing silver content.
- 8 August 2019
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 35 (34) , 11150-11156
Pouring of Grains onto Liquid Surfaces: Dispersion or Lump Formation?
This study considers the consequences of adding grains to an air–liquid interface from a funnel. Depending on the grain contact angle and liquid surface tension, the interface is found to support a single or multiple layers of grains, forming a granular stack. By continuing to add grains, the stacks grow until either the lower grains disperse in the liquid, or the complete stack breaks free from the surface and sinks as a dry powder lump. Herein, the effects of grain contact angle, density, and size on these processes are studied experimentally, and a theoretical analysis is given. The maximum number of grains contained in a floating stack and its critical depth are observed to increase as the grain size decreases. The maximum number of grains scales with the bond number (Bo) as Bo–1.82 when stack detachment is observed and with an exponent –2.0 when grains disperse into the liquid. As a result of these different scaling exponents, a critical bond number above which grains wet and disperse can be identified. Favorable conditions for dispersion are achieved with larger grains and, to a lesser extent, by lower surface tension and contact angle. The critical bond number separating grain dispersion from lump formation increases with an increasing grain contact angle, thus providing a physical justification for increasing grain size with common processes such as granulation or agglomeration. Conversely, a quantitative framework to interpret the limitations in dispersing small grains is proposed, justifying the need for low contact angle or liquids with low surface tensions, both favored by the use of surfactants. The present findings have identified conditions under which lump formation occurs, and hence how these undesired phenomena can be avoided in applications requiring the efficient dispersion of grains across a liquid interface.
- 8 August 2019
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 35 (34) , 11150-11156
Pouring of Grains onto Liquid Surfaces: Dispersion or Lump Formation?
This study considers the consequences of adding grains to an air–liquid interface from a funnel. Depending on the grain contact angle and liquid surface tension, the interface is found to support a single or multiple layers of grains, forming a granular stack. By continuing to add grains, the stacks grow until either the lower grains disperse in the liquid, or the complete stack breaks free from the surface and sinks as a dry powder lump. Herein, the effects of grain contact angle, density, and size on these processes are studied experimentally, and a theoretical analysis is given. The maximum number of grains contained in a floating stack and its critical depth are observed to increase as the grain size decreases. The maximum number of grains scales with the bond number (Bo) as Bo–1.82 when stack detachment is observed and with an exponent –2.0 when grains disperse into the liquid. As a result of these different scaling exponents, a critical bond number above which grains wet and disperse can be identified. Favorable conditions for dispersion are achieved with larger grains and, to a lesser extent, by lower surface tension and contact angle. The critical bond number separating grain dispersion from lump formation increases with an increasing grain contact angle, thus providing a physical justification for increasing grain size with common processes such as granulation or agglomeration. Conversely, a quantitative framework to interpret the limitations in dispersing small grains is proposed, justifying the need for low contact angle or liquids with low surface tensions, both favored by the use of surfactants. The present findings have identified conditions under which lump formation occurs, and hence how these undesired phenomena can be avoided in applications requiring the efficient dispersion of grains across a liquid interface.
- Open Access
- 31 May 2019
- Published by MDPI AG in Colloids and Interfaces
- Vol. 3 (2) , 50
Colloids and Interfaces in Oil Recovery
The role of surface and colloid chemistry in the petroleum industry is of great importance to the many current and future challenges confronting this sector
- 31 May 2019
- Published by MDPI AG in Colloids and Interfaces
- Vol. 3 (2) , 50
Open AccessColloids and Interfaces in Oil Recovery
The role of surface and colloid chemistry in the petroleum industry is of great importance to the many current and future challenges confronting this sector
- Open Access
- 6 November 2018
- Published by MDPI AG in Colloids and Interfaces
- Vol. 2 (4) , 54
Addendum: Taylor, S.E., et al. Metal Ion Interactions with Crude Oil Components: Specificity of Ca2+ Binding to Naphthenic Acid at an Oil/Water Interface. Colloids Interfaces 2018, 2, 40.
In the article recently published in Colloids and Interfaces
- 6 November 2018
- Published by MDPI AG in Colloids and Interfaces
- Vol. 2 (4) , 54
Open AccessAddendum: Taylor, S.E., et al. Metal Ion Interactions with Crude Oil Components: Specificity of Ca2+ Binding to Naphthenic Acid at an Oil/Water Interface. Colloids Interfaces 2018, 2, 40.
In the article recently published in Colloids and Interfaces
- Open Access
- 18 September 2018
- Published by MDPI AG in Colloids and Interfaces
- Vol. 2 (3) , 40
Metal Ion Interactions with Crude Oil Components: Specificity of Ca2+ Binding to Naphthenic Acid at an Oil/Water Interface
On the basis of dynamic interfacial tension measurements, Ca2+ has been shown specifically to interact with naphthenic acid (NA) at the n-heptane/water interface, consistent with NA adsorption followed by interfacial complexation and formation of a more ordered interfacial film. Optimum concentrations of Ca2+ and NA have been found to yield lower, time-dependent interfacial tensions, not evident for Mg2+ and Sr2+ or for several alkali metal ions studied. The results reflect the specific hydration and coordination chemistry of Ca2+ seen in biology. Owing to the ubiquitous presence of Ca2+ in oilfield waters, this finding has potential relevance to the surface chemistry underlying crude oil recovery. For example, “locking” acidic components at water/oil interfaces may be important for crude oil emulsion stability, or in bonding bulk oil to mineral surfaces through an aqueous phase, potentially relevant for carbonate reservoirs. The relevance of the present results to low salinity waterflooding as an enhanced crude oil recovery technique is also discussed.
- 18 September 2018
- Published by MDPI AG in Colloids and Interfaces
- Vol. 2 (3) , 40
Open AccessMetal Ion Interactions with Crude Oil Components: Specificity of Ca2+ Binding to Naphthenic Acid at an Oil/Water Interface
On the basis of dynamic interfacial tension measurements, Ca2+ has been shown specifically to interact with naphthenic acid (NA) at the n-heptane/water interface, consistent with NA adsorption followed by interfacial complexation and formation of a more ordered interfacial film. Optimum concentrations of Ca2+ and NA have been found to yield lower, time-dependent interfacial tensions, not evident for Mg2+ and Sr2+ or for several alkali metal ions studied. The results reflect the specific hydration and coordination chemistry of Ca2+ seen in biology. Owing to the ubiquitous presence of Ca2+ in oilfield waters, this finding has potential relevance to the surface chemistry underlying crude oil recovery. For example, “locking” acidic components at water/oil interfaces may be important for crude oil emulsion stability, or in bonding bulk oil to mineral surfaces through an aqueous phase, potentially relevant for carbonate reservoirs. The relevance of the present results to low salinity waterflooding as an enhanced crude oil recovery technique is also discussed.
- 1 May 2018
- Published by Elsevier in European Polymer Journal
- Vol. 102, 111-119
Viscometric analysis of the hydration of a surface cross-linked EM-HEC polymer
- 1 May 2018
- Published by Elsevier in European Polymer Journal
- Vol. 102, 111-119
Viscometric analysis of the hydration of a surface cross-linked EM-HEC polymer