Melih Soner Celiktas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Melih Soner Celiktas has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Gunnur Kocar
Ege University Biomass Energy Systems and Technology Application and Research Center, Bornova-Izmir, Türkiye
7 shared publications Fikret Muge Alptekin
Ege University Solar Energy Institute, 35040 Bornova, Izmir, Turkey
5 shared publications- Ozlem Yesil-Celiktas
Department of Bioengineering Faculty of Engineering Ege University Izmir Turkey
5 shared publications - Aslı Birtürk
Ege University, Solar Energy Institute, 35100, Bornova, Izmir, Turkey
4 shared publications - Merve Uyan
Solar Energy Institute, Ege University, Bornova, Türkiye; Department of Mechanical Engineering, University of Alberta, Edmonton, AB, Canada
4 shared publications Sayit Sargin
4 shared publications
Latest Publications
- Open Access
- 12 December 2025
- Published by Kirsehir Ahi Evran University in Sürdürülebilir Mühendislik Uygulamaları ve Teknolojik Gelişmeler Dergisi
- Vol. 8 (2) , 109-119
İklim Değişikliği ile Mücadele Kapsamında Sınırda Karbon Uygulamaları
İklim değişikliği ile mücadele kapsamında büyük bir tehdit oluşturan sera gazları salımı, dünya genelinde olduğu gibi Avrupa Birliği’nin (AB) de öncelikli gündem maddeleri arasında yer almaktadır. Avrupa Birliği (AB), iklim krizi tehdidini etkisiz hale getirebilmek için Avrupa Yeşil Mutabakatı çalışmalarının başlatmıştır. Yeşil mutabakata tabii olan Sınırda Karbon Düzenleme Mekanizması (SKDM) AB dışındaki ülkeler için bir yükümlülük getirmektedir. Ekonomik açıdan büyük bir paya sahip olan AB ihracatını nasıl etkileyeceğine, ülkemiz açısından nasıl bir risk teşkil edeceğine dair çalışmalar yapılmaktadır. Bu çalışma kapsamında Türkiye’de Çimento sektörünün geçiş sürecine ne kadar hazırlıklı olduğu araştırılmıştır. Veriler incelendiğinde; karbon salımı hedefleri çoğunlukla mutlak değerler üzerinden değil, oransal (yüzdelik) ifadelerle belirlenmiş olup, başlangıç ve hedef değerleri net olarak verilmediği, raporların daha şeffaf olması ve sayısal veri içeriğinin artması zorunluluğu görülmüştür. Bu durumda rekabetçi düzeyde olması beklenen çimento sektörünün yeşil geçiş aşaması için hazırlıklarını hızlandırması ve raporlandırma çalışmalarını detaylandırma gerekliliği göze çarpmaktadır.
- 12 December 2025
- Published by Kirsehir Ahi Evran University in Sürdürülebilir Mühendislik Uygulamaları ve Teknolojik Gelişmeler Dergisi
- Vol. 8 (2) , 109-119
Open Accessİklim Değişikliği ile Mücadele Kapsamında Sınırda Karbon Uygulamaları
İklim değişikliği ile mücadele kapsamında büyük bir tehdit oluşturan sera gazları salımı, dünya genelinde olduğu gibi Avrupa Birliği’nin (AB) de öncelikli gündem maddeleri arasında yer almaktadır. Avrupa Birliği (AB), iklim krizi tehdidini etkisiz hale getirebilmek için Avrupa Yeşil Mutabakatı çalışmalarının başlatmıştır. Yeşil mutabakata tabii olan Sınırda Karbon Düzenleme Mekanizması (SKDM) AB dışındaki ülkeler için bir yükümlülük getirmektedir. Ekonomik açıdan büyük bir paya sahip olan AB ihracatını nasıl etkileyeceğine, ülkemiz açısından nasıl bir risk teşkil edeceğine dair çalışmalar yapılmaktadır. Bu çalışma kapsamında Türkiye’de Çimento sektörünün geçiş sürecine ne kadar hazırlıklı olduğu araştırılmıştır. Veriler incelendiğinde; karbon salımı hedefleri çoğunlukla mutlak değerler üzerinden değil, oransal (yüzdelik) ifadelerle belirlenmiş olup, başlangıç ve hedef değerleri net olarak verilmediği, raporların daha şeffaf olması ve sayısal veri içeriğinin artması zorunluluğu görülmüştür. Bu durumda rekabetçi düzeyde olması beklenen çimento sektörünün yeşil geçiş aşaması için hazırlıklarını hızlandırması ve raporlandırma çalışmalarını detaylandırma gerekliliği göze çarpmaktadır.
- Open Access
Effect of Process Parameters and Biomass Type on Properties of Carbon Produced by Pyrolysis
Porous carbon from renewable resources like biomass is a key material utilized in many applications ranging from environmental remediation to energy storage. There are limited reports in the literature on the effects of biomass pretreatment, production process parameters, and downstream processing on the final product properties. This is the first study aimed at closing the latter research gap. Six different types of underutilized biomass were examined: eastern red cedar wood, pecan shells, hazelnut shells, algal biomass, miscanthus, and sludge produced at municipal wastewater treatment facilities. Although pretreatment of biomass with KOH or ZnCl2 enhanced formation of micro- and mesopores, carbon yield was lower (15.3–32.5%) than that obtained via non-catalytic pyrolysis (28.3–48%). An optimization study performed using response surface methodology and cedar wood has shown the significant effects (p < 0.05) of temperature and catalyst/biomass ratio on total BET pore volume and surface area. Additionally, catalyst/biomass ratio had a significant effect on the crystal structure and pore size distribution in the carbon produced by pyrolysis. Hence, optimization of process temperature, hold time, and activation ratio is capable of yielding porous carbon from cedar wood pyrolysis with desirable properties.
Open AccessEffect of Process Parameters and Biomass Type on Properties of Carbon Produced by Pyrolysis
Porous carbon from renewable resources like biomass is a key material utilized in many applications ranging from environmental remediation to energy storage. There are limited reports in the literature on the effects of biomass pretreatment, production process parameters, and downstream processing on the final product properties. This is the first study aimed at closing the latter research gap. Six different types of underutilized biomass were examined: eastern red cedar wood, pecan shells, hazelnut shells, algal biomass, miscanthus, and sludge produced at municipal wastewater treatment facilities. Although pretreatment of biomass with KOH or ZnCl2 enhanced formation of micro- and mesopores, carbon yield was lower (15.3–32.5%) than that obtained via non-catalytic pyrolysis (28.3–48%). An optimization study performed using response surface methodology and cedar wood has shown the significant effects (p < 0.05) of temperature and catalyst/biomass ratio on total BET pore volume and surface area. Additionally, catalyst/biomass ratio had a significant effect on the crystal structure and pore size distribution in the carbon produced by pyrolysis. Hence, optimization of process temperature, hold time, and activation ratio is capable of yielding porous carbon from cedar wood pyrolysis with desirable properties.
- 22 July 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 159
Advancing hydrogen production: The synergy of pretreatment and boron catalysts
- 22 July 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 159
Advancing hydrogen production: The synergy of pretreatment and boron catalysts
- Open Access
- 4 March 2025
- Published by Universe Scientific Publishing Pte. Ltd. in Clean Energy Science and Technology
- Vol. 3 (1) , 273
Projections of global energy transition models in the wake of industrial revolution and climate change policies
This study evaluates the potential impacts of Industry 4.0 on energy demand, CO2 emissions, and climate change up to 2050 and provides an analytical basis for developing climate policies. Using the Low-Emissions Analysis Platform, the paper calculated projected technology diffusions under reference, moderate-adoption, and high-adoption scenarios. The findings reveal that adopting Industry 4.0 can significantly increase electricity demand. To address these challenges, the study recommends that policymakers adopt uniform carbon pricing policies, focus on decarbonizing energy supply and demand, and develop infrastructure for road transportation electrification. Policymakers are also urged to transition to carbon-free electricity generation technologies and implement pricing policies covering all sectors’ emission intensities to reduce total emissions effectively. Finally, the study highlights the importance of conducting holistic evaluations through life-cycle analyses. It suggests future research areas, including regional variations, energy demand shifts between sectors, energy cost evaluation, and conducting life-cycle analyses for electric vehicles and renewable energy technologies.
- 4 March 2025
- Published by Universe Scientific Publishing Pte. Ltd. in Clean Energy Science and Technology
- Vol. 3 (1) , 273
Open AccessProjections of global energy transition models in the wake of industrial revolution and climate change policies
This study evaluates the potential impacts of Industry 4.0 on energy demand, CO2 emissions, and climate change up to 2050 and provides an analytical basis for developing climate policies. Using the Low-Emissions Analysis Platform, the paper calculated projected technology diffusions under reference, moderate-adoption, and high-adoption scenarios. The findings reveal that adopting Industry 4.0 can significantly increase electricity demand. To address these challenges, the study recommends that policymakers adopt uniform carbon pricing policies, focus on decarbonizing energy supply and demand, and develop infrastructure for road transportation electrification. Policymakers are also urged to transition to carbon-free electricity generation technologies and implement pricing policies covering all sectors’ emission intensities to reduce total emissions effectively. Finally, the study highlights the importance of conducting holistic evaluations through life-cycle analyses. It suggests future research areas, including regional variations, energy demand shifts between sectors, energy cost evaluation, and conducting life-cycle analyses for electric vehicles and renewable energy technologies.
- Open Access
- 1 January 2025
- Published by TANGER Ltd.
- Vol. 2025, 328-334
Preparation Strategies and Multifunctional Applications of Cellulose-Based Aerogels in Energy and Environmental Fields
- 1 January 2025
- Published by TANGER Ltd.
- Vol. 2025, 328-334
Open AccessPreparation Strategies and Multifunctional Applications of Cellulose-Based Aerogels in Energy and Environmental Fields
- 31 December 2024
- Published by Elsevier in Separation and Purification Technology
- Vol. 361
A novel enzymatic delamination method for sustainable recycling of crystal silicon photovoltaic (c-Si PV) modules
- 31 December 2024
- Published by Elsevier in Separation and Purification Technology
- Vol. 361
A novel enzymatic delamination method for sustainable recycling of crystal silicon photovoltaic (c-Si PV) modules
- Open Access
- 13 December 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (51) , 50158-50174
Optimization of Green Extraction Techniques for Polyphenolics in Pinus brutia Bark Extract and Steam Gasification of the Remaining Fraction to Obtain Hydrogen-Rich Syngas and Activated Carbon
Utilization of renewable resources has become imperative, and considerable efforts have been devoted to tackling diverse global sustainability challenges, which contribute to the circular economy. The focus of this work was to optimize the extraction of polyphenolic compounds in Pinus brutia bark using microwave-assisted (MAE) and ultrasonically assisted (UAE) extractions and evaluate the biological efficacies of the extracts. Additionally, the residue of the extracted pine bark was subjected to steam gasification to produce hydrogen-rich syngas and activated carbon. The optimum process parameters for MAE were determined as 70 degrees C, 10 min, and 900 W, and 987.32 mg gallic acid equivalent (GAE), 23.7 mg quercetin/g extract, and 86.2% antioxidant activity were obtained. The optimum process parameters for UAE were determined as 70 degrees C, 20 min, and 50% power, and 811.84 mg gallic acid equivalent (GAE), 30.1 mg quercetin/g extract, and 90.8% antioxidant efficiency were obtained. The extracts obtained under optimized conditions were assessed for the bioactive phenolic compounds taxifolin, (-)-catechin, (-)-epicatechin, and (-)-epicatechin gallate by ultra performance liquid chromatography (UPLC). Especially in MAE (ethanol), taxifolin content was notable (34.0 mg/g extract), followed by UAE (ethanol) (23.5 mg/g extract). Compared to MAE (ethanol) and UAE (ethanol) with regards to catechin content, 1.05 mg/g extract and 0.81 mg/g extract were obtained, respectively. Catalytic and noncatalytic steam gasification of pine bark residue yielded 57.3 and 60.8 mol % H2, respectively. In addition, excellent tar reduction was achieved through utilizing a 10% boron-modified CaO alkali catalyst, and the obtained activated carbon exhibited 1358.32 m2/g Brunauer-Emmett-Teller (BET) surface area and 1.05 cm3/g total pore volume, which has potential use as an adsorbent for removing heavy metals and electrode material for supercapacitor application.
- 13 December 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (51) , 50158-50174
Open AccessOptimization of Green Extraction Techniques for Polyphenolics in Pinus brutia Bark Extract and Steam Gasification of the Remaining Fraction to Obtain Hydrogen-Rich Syngas and Activated Carbon
Utilization of renewable resources has become imperative, and considerable efforts have been devoted to tackling diverse global sustainability challenges, which contribute to the circular economy. The focus of this work was to optimize the extraction of polyphenolic compounds in Pinus brutia bark using microwave-assisted (MAE) and ultrasonically assisted (UAE) extractions and evaluate the biological efficacies of the extracts. Additionally, the residue of the extracted pine bark was subjected to steam gasification to produce hydrogen-rich syngas and activated carbon. The optimum process parameters for MAE were determined as 70 degrees C, 10 min, and 900 W, and 987.32 mg gallic acid equivalent (GAE), 23.7 mg quercetin/g extract, and 86.2% antioxidant activity were obtained. The optimum process parameters for UAE were determined as 70 degrees C, 20 min, and 50% power, and 811.84 mg gallic acid equivalent (GAE), 30.1 mg quercetin/g extract, and 90.8% antioxidant efficiency were obtained. The extracts obtained under optimized conditions were assessed for the bioactive phenolic compounds taxifolin, (-)-catechin, (-)-epicatechin, and (-)-epicatechin gallate by ultra performance liquid chromatography (UPLC). Especially in MAE (ethanol), taxifolin content was notable (34.0 mg/g extract), followed by UAE (ethanol) (23.5 mg/g extract). Compared to MAE (ethanol) and UAE (ethanol) with regards to catechin content, 1.05 mg/g extract and 0.81 mg/g extract were obtained, respectively. Catalytic and noncatalytic steam gasification of pine bark residue yielded 57.3 and 60.8 mol % H2, respectively. In addition, excellent tar reduction was achieved through utilizing a 10% boron-modified CaO alkali catalyst, and the obtained activated carbon exhibited 1358.32 m2/g Brunauer-Emmett-Teller (BET) surface area and 1.05 cm3/g total pore volume, which has potential use as an adsorbent for removing heavy metals and electrode material for supercapacitor application.
- 1 September 2024
- Published by Emerald Publishing in Emerging Materials Research
- Vol. 13 (3) , 192-211
Novel constitutive models, challenges and opportunities of shape memory polymer composites
Shape memory polymers (SMPs) are smart materials that have been widely accepted in potential applications ranging from biomedical devices to aerospace. Despite their limitations in engineering applications, SMPs have been utilized for strengthening, innovation and improvement of driving methods, leading to an increase in research on SMP composites (SMPCs). In this review, SMPs used in the production, actuation mechanisms, fabrication and testing methods of SMPCs are presented. Current and potential applications and novel constitutive models that have a very important place in elucidating the interface of SMPCs are introduced. Finally, challenges and opportunities are presented to provide future prospects for SMPCs.
- 1 September 2024
- Published by Emerald Publishing in Emerging Materials Research
- Vol. 13 (3) , 192-211
Novel constitutive models, challenges and opportunities of shape memory polymer composites
Shape memory polymers (SMPs) are smart materials that have been widely accepted in potential applications ranging from biomedical devices to aerospace. Despite their limitations in engineering applications, SMPs have been utilized for strengthening, innovation and improvement of driving methods, leading to an increase in research on SMP composites (SMPCs). In this review, SMPs used in the production, actuation mechanisms, fabrication and testing methods of SMPCs are presented. Current and potential applications and novel constitutive models that have a very important place in elucidating the interface of SMPCs are introduced. Finally, challenges and opportunities are presented to provide future prospects for SMPCs.
- 31 August 2024
- Published by Springer Nature
- p. 23-41
Hydrogen as an Alternative Biofuel Through Gasification Process: Comparative Study of the EU and Turkey
- 31 August 2024
- Published by Springer Nature
- p. 23-41
Hydrogen as an Alternative Biofuel Through Gasification Process: Comparative Study of the EU and Turkey
- 14 July 2024
- Published by Elsevier in Journal of Cleaner Production
- Vol. 469
Subcritical water delamination: A promising path to efficient recycling of critical minerals
- 14 July 2024
- Published by Elsevier in Journal of Cleaner Production
- Vol. 469
Subcritical water delamination: A promising path to efficient recycling of critical minerals