Kevin Nickels
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Kevin Nickels has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Ashitey Trebi-Ollennu
California Institute of Technology
1 shared publication - David Anthony
Southwest Research Institute, 6220 Culebra Road, San Antonio, TX 78228, USA
1 shared publication - Duncan Frasch
Department of Engineering Science, Trinity University, One Trinity Place, San Antonio, TX 78212-7200, USA
1 shared publication - Eric Huber
TRACLabs Inc. / NASA-JSC, Houston, TX 77058
1 shared publication Eric T. Baumgartner
Ohio Northern University
1 shared publication- Graham W. Fiorani
US Army CCDC Ground Vehicle Systems Center, 6305 E Eleven Mile Rd, Warren, MI 48092, USA
1 shared publication
Latest Publications
- Open Access
Persistent Mapping of Sensor Data for Medium-Term Autonomy
For vehicles to operate in unmapped areas with some degree of autonomy, it would be useful to aggregate and store processed sensor data so that it can be used later. In this paper, a tool that records and optimizes the placement of costmap data on a persistent map is presented. The optimization takes several factors into account, including local vehicle odometry, GPS signals when available, local map consistency, deformation of map regions, and proprioceptive GPS offset error. Results illustrating the creation of maps from previously unseen regions (a 100 m × 880 m test track and a 1.2 km dirt trail) are presented, with and without GPS signals available during the creation of the maps. Finally, two examples of the use of these maps are given. First, a path is planned along roads that have been seen exactly once during the mapping phase. Secondly, the map is used for vehicle localization in the absence of GPS signals.
Open AccessPersistent Mapping of Sensor Data for Medium-Term Autonomy
For vehicles to operate in unmapped areas with some degree of autonomy, it would be useful to aggregate and store processed sensor data so that it can be used later. In this paper, a tool that records and optimizes the placement of costmap data on a persistent map is presented. The optimization takes several factors into account, including local vehicle odometry, GPS signals when available, local map consistency, deformation of map regions, and proprioceptive GPS offset error. Results illustrating the creation of maps from previously unseen regions (a 100 m × 880 m test track and a 1.2 km dirt trail) are presented, with and without GPS signals available during the creation of the maps. Finally, two examples of the use of these maps are given. First, a path is planned along roads that have been seen exactly once during the mapping phase. Secondly, the map is used for vehicle localization in the absence of GPS signals.
- Open Access
- 3 September 2020
- Published by American Society for Engineering Education
- p. 7.609.1-7.609.6
Herding Cats : A Case Study Of A Capstone Design Course
- 3 September 2020
- Published by American Society for Engineering Education
- p. 7.609.1-7.609.6
Open AccessHerding Cats : A Case Study Of A Capstone Design Course
- Open Access
- 12 October 2019
- Published by MDPI AG in Biomimetics
- Vol. 4 (4) , 69
Effective Exploration Behavior for Chemical-Sensing Robots
Mobile robots that can effectively detect chemical effluents could be useful in a variety of situations, such as disaster relief or drug sniffing. Such a robot might mimic biological systems that exhibit chemotaxis, which is movement towards or away from a chemical stimulant in the environment. Some existing robotic exploration algorithms that mimic chemotaxis suffer from the problems of getting stuck in local maxima and becoming “lost”, or unable to find the chemical if there is no initial detection. We introduce the use of the RapidCell algorithm for mobile robots exploring regions with potentially detectable chemical concentrations. The RapidCell algorithm mimics the biology behind the biased random walk of Escherichia coli (E. coli) bacteria more closely than traditional chemotaxis algorithms by simulating the chemical signaling pathways interior to the cell. For comparison, we implemented a classical chemotaxis controller and a controller based on RapidCell, then tested them in a variety of simulated and real environments (using phototaxis as a surrogate for chemotaxis). We also added simple obstacle avoidance behavior to explore how it affects the success of the algorithms. Both simulations and experiments showed that the RapidCell controller more fully explored the entire region of detectable chemical when compared with the classical controller. If there is no detectable chemical present, the RapidCell controller performs random walk in a much wider range, hence increasing the chance of encountering the chemical. We also simulated an environment with triple effluent to show that the RapidCell controller avoided being captured by the first encountered peak, which is a common issue for the classical controller. Our study demonstrates that mimicking the adapting sensory system of E. coli chemotaxis can help mobile robots to efficiently explore the environment while retaining their sensitivity to the chemical gradient.
- 12 October 2019
- Published by MDPI AG in Biomimetics
- Vol. 4 (4) , 69
Open AccessEffective Exploration Behavior for Chemical-Sensing Robots
Mobile robots that can effectively detect chemical effluents could be useful in a variety of situations, such as disaster relief or drug sniffing. Such a robot might mimic biological systems that exhibit chemotaxis, which is movement towards or away from a chemical stimulant in the environment. Some existing robotic exploration algorithms that mimic chemotaxis suffer from the problems of getting stuck in local maxima and becoming “lost”, or unable to find the chemical if there is no initial detection. We introduce the use of the RapidCell algorithm for mobile robots exploring regions with potentially detectable chemical concentrations. The RapidCell algorithm mimics the biology behind the biased random walk of Escherichia coli (E. coli) bacteria more closely than traditional chemotaxis algorithms by simulating the chemical signaling pathways interior to the cell. For comparison, we implemented a classical chemotaxis controller and a controller based on RapidCell, then tested them in a variety of simulated and real environments (using phototaxis as a surrogate for chemotaxis). We also added simple obstacle avoidance behavior to explore how it affects the success of the algorithms. Both simulations and experiments showed that the RapidCell controller more fully explored the entire region of detectable chemical when compared with the classical controller. If there is no detectable chemical present, the RapidCell controller performs random walk in a much wider range, hence increasing the chance of encountering the chemical. We also simulated an environment with triple effluent to show that the RapidCell controller avoided being captured by the first encountered peak, which is a common issue for the classical controller. Our study demonstrates that mimicking the adapting sensory system of E. coli chemotaxis can help mobile robots to efficiently explore the environment while retaining their sensitivity to the chemical gradient.
- 1 January 2014
- Published by Springer Nature
- p. 13-28
Programming an E-Puck Robot to Create Maps of Virtual and Physical Environments
- 1 January 2014
- Published by Springer Nature
- p. 13-28
Programming an E-Puck Robot to Create Maps of Virtual and Physical Environments
- 30 May 2007
- Published by Springer Nature in Autonomous Robots
- Vol. 23 (2) , 83-96
Hybrid image plane/stereo (HIPS) manipulation for robotic space applications
- 30 May 2007
- Published by Springer Nature in Autonomous Robots
- Vol. 23 (2) , 83-96
Hybrid image plane/stereo (HIPS) manipulation for robotic space applications
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1095323X,p. 1-9
Hand-Eye Calibratilon Using Active Vision
The project described in this paper designed and implemented a hand-eye calibration method for manipulators under observation by stereo cameras. This method has been utilized on Johnson Space Center's Robonaut, and on a planetary manipulator mock-up at the Jet Propulsion Laboratory. The intent of this calibration is to improve the manipulator's hand-eye coordination. The approach uses kinematic and stereo vision measurements, namely the joint angles self-reported by the arm and 3-D positions of a calibration fixture as measured by vision, to estimate the transformation from the arm's base coordinate system to its hand coordinate system and to its vision coordinate system. In this formulation, the stereo measurements are assumed to be accurate, and any mismatches are absorbed in a modified model of the arm. These methods have shown to reduce mismatch between kinematically derived positions and visually derived positions on Robonaut Unit A from a mean of 13.75 cm to a mean of 1.85 cm. Improved performance in semi-autonomous tasks is also described. On JPL's manipulator, with kinematics similar to that of the Mars Exploration Rover, the calibration reduced the mismatch from 15.26 mm to between 3 mm and 5.5 mm.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1095323X,p. 1-9
Hand-Eye Calibratilon Using Active Vision
The project described in this paper designed and implemented a hand-eye calibration method for manipulators under observation by stereo cameras. This method has been utilized on Johnson Space Center's Robonaut, and on a planetary manipulator mock-up at the Jet Propulsion Laboratory. The intent of this calibration is to improve the manipulator's hand-eye coordination. The approach uses kinematic and stereo vision measurements, namely the joint angles self-reported by the arm and 3-D positions of a calibration fixture as measured by vision, to estimate the transformation from the arm's base coordinate system to its hand coordinate system and to its vision coordinate system. In this formulation, the stereo measurements are assumed to be accurate, and any mismatches are absorbed in a modified model of the arm. These methods have shown to reduce mismatch between kinematically derived positions and visually derived positions on Robonaut Unit A from a mean of 13.75 cm to a mean of 1.85 cm. Improved performance in semi-autonomous tasks is also described. On JPL's manipulator, with kinematics similar to that of the Mars Exploration Rover, the calibration reduced the mismatch from 15.26 mm to between 3 mm and 5.5 mm.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-11
Kinematic-Vision Residuals Analysis
This paper describes the design, validation, and integration of a tool to locate a portion of the instrument deployment device (IDD) on the Mars exploration rover (MER) vehicles on Mars in imagery from the front hazard avoidance cameras, and to track the differences between the predicted and detected position of the manipulator over time. The analysis of kinematic-vision residuals, or the difference between where a manipulator is expected to appear in onboard imagery and where it actually appears in the imagery, yields insight into several aspects of an operational robotic system. The fidelity of the IDD and camera models is evaluated. Systematic changes in the performance over time can give insight to rover degradation or other changes. Finally, new models can be proposed and evaluated on the basis of trended data over time.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-11
Kinematic-Vision Residuals Analysis
This paper describes the design, validation, and integration of a tool to locate a portion of the instrument deployment device (IDD) on the Mars exploration rover (MER) vehicles on Mars in imagery from the front hazard avoidance cameras, and to track the differences between the predicted and detected position of the manipulator over time. The analysis of kinematic-vision residuals, or the difference between where a manipulator is expected to appear in onboard imagery and where it actually appears in the imagery, yields insight into several aspects of an operational robotic system. The fidelity of the IDD and camera models is evaluated. Systematic changes in the performance over time can give insight to rover degradation or other changes. Finally, new models can be proposed and evaluated on the basis of trended data over time.