Chih-Chi Yang

The increasing volume of agricultural wastes presents both an environmental burden and a potential resource for circular economy applications. Green extraction technologies offer a viable route to recover valuable bioactive compounds from these residues while reducing reliance on hazardous solvents and energy-intensive processes. This review examines recent developments in Natural Deep Eutectic Solvents (NADES) coupled with Ultrasound-Assisted Extraction (UAE) and Microwave-Assisted Extraction (MAE), with particular focus on their combined contributions to efficiency, selectivity, and process sustainability. The mechanistic roles of cavitation-driven cell disruption and dielectric heating are discussed in relation to mass transfer enhancement and solvent–matrix interactions. Optimization strategies, including Taguchi designs, response surface methodology, artificial neural networks, and multi-response desirability models, are evaluated for their effectiveness in refining extraction conditions. Greenness assessment tools such as Analytical Greenness (AGREE), Green Analytical Procedure Index (GAPI), and the Analytical Eco-Scale are also reviewed to highlight inconsistencies in current sustainability evaluations and to identify opportunities for more comprehensive benchmarking. By integrating solvent innovation, process intensification, and environmental metrics, this review situates NADES-based UAE/MAE as emerging platforms for the valorization of agricultural wastes within a sustainable circular economy framework. Key research gaps and future directions are identified, including the need for standardized greenness metrics, improved understanding of synergistic mechanisms, and assessment of solvent recyclability for future scale-up.

Integrated fixed-film activated sludge (IFAS) technology greatly enhances nitrogen removal effectiveness and treatment capacity in municipal wastewater treatment plants, addressing the issue of limited land availability. Hence, this method is appropriate for treating household wastewater from office buildings. The research was conducted at the wastewater treatment plant in an office building in Ho Chi Minh City, Vietnam. Experiments were conducted to ascertain the most favorable working conditions, including hydraulic retention time (HRT), alkalinity dosage, and dissolved oxygen (DO). According to the study, the IFAS system had the highest nitrogen removal effectiveness when operated at a hydraulic retention time (HRT) of 7 h, an alkalinity dose of 7.14 mgCaCO₃/mgN-NH₄⁺, and a dissolved oxygen (DO) value of 6 mg/L. The nitrification efficiency ranges from 89.2% to 98.8%. The N-NO₃⁻ concentration post-treatment is within the range of 27–45 mgN-NO₃⁻/L, which is lower than the allowable discharge limit of 60 mg/L as per Vietnam’s wastewater discharge requirements. The research findings have enhanced the efficiency of the office building management process, thereby promoting the sustainable growth of society.

Integrated Fixed Film Activated Sludge (IFAS) technology greatly enhances nitrogen removal effectiveness and treatment capacity in municipal wastewater treatment plants, addressing the issue of limited land availability. Hence, this method is appropriate for treating household wastewater from office buildings. The research was conducted at the wastewater treatment plant in an office building in Ho Chi Minh City, Vietnam. Experiments were conducted to ascertain the most favorable working conditions, including Hydraulic Retention Time (HRT), alkalinity dosage, and Dissolved Oxygen (DO). According to the study, the IFAS system had the highest nitrogen removal effectiveness when operated at a hydraulic retention time (HRT) of 7 hours, an alkalinity dose of 7.14 mgCaCO3/mgN-NH4+, and a dissolved oxygen (DO) value of 6 mg/L. The nitrification efficiency ranges from 89.2% to 98.8%. The nitrate concentration post-treatment is within the range of 27 – 45 mg/L, which is lower than the allowable discharge limit of 60 mg/L as per Vietnam's wastewater discharge requirements. The research findings have enhanced the efficiency of the office building management process, thereby promoting the sustainable growth of society.

The application of fixed activated sludge with an attached growth process (FASAG) with optimal operating conditions (hydraulic retention time (HRT) of 7 h, dissolved oxygen (DO) of 6 mg/L, and alkalinity dosage of 7.14 mgCaCO₃/mgN-NH₄⁺) treats wastewater generated from office buildings to meet discharge requirements (as per the regulation in the nation where the study was conducted) with typical parameters such as pH of 6.87–7.56, chemical oxygen demand (COD) of 32–64 mg/L, suspended solids (SS) of 8–11 mg/L, N-NH₄⁺ of 1–7 mg/L, and denitrification efficiency reaches 53%. In addition, the FASAG is an outstanding integration that makes both economic and environmental sense when applied in local wastewater treatment systems. In particular, this process combines aerobic and anoxic processes in a creation tank. This explains why this approach can save investment and operating costs, energy, and land funds. In office building regions, where land area is frequently limited, saving land funds presents numerous options to enhance the density of green cover. Furthermore, as a new aspect, investing in reusing wastewater after treatment to irrigate plants or flush toilets in office buildings contributes to a decrease in the quantity of wastewater released into the environment, saving water resources and supporting sustainable development.

Pharmaceutical and personal care products are frequently used in various fields and released into water bodies from the outlets of wastewater treatment plants. These products can harm the environment and human health even at low concentrations. Carbamazepine (CBZ), the most persistent pharmaceutical, has frequently been found in surface waters that bypassed the secondary treatments of conventional activated sludge. In addition, the treatment of phosphate in wastewater by the electrochemical process has recently attracted much attention because of its ability to remove, recover, and prevent environmental problems associated with eutrophication. This study proposes using the electrochemical process as an advanced oxidation process to simultaneously treat CBZ and phosphate from the moving-bed membrane bioreactor effluent. The study includes a long-term survey of CBZ treatment efficiency and common parameters of synthetic wastewater in the moving-bed membrane bioreactor system. Afterward, the electrochemical process is applied as an advanced oxidation process for the simultaneous removal of CBZ and phosphate from the moving-bed membrane bioreactor. Under the investigated conditions, CBZ has proven not to be an inhibitor of microbial activity, as evidenced by the high extent of chemical oxygen demand and nutrient removal. Using a factorial design, the electrochemical process using Pt/Ti as anode and cathode under optimal conditions (reaction time—80 min, bias potential—3 V, and electrode distance—1 cm) resulted in as high as 56.94% CBZ and 95.95% phosphate removal, respectively. The results demonstrated the ability to combine an electrochemical and a moving-bed membrane bioreactor process to simultaneously remove CBZ and phosphate in wastewater.

Pharmaceuticals and personal care products have raised significant concerns because of their extensive use, presence in aquatic environments, and potential impacts on wildlife and humans. Carbamazepine was the most frequently detected pharmaceutical residue among pharmaceuticals and personal care products. Nevertheless, the low removal efficiency of carbamazepine by conventional wastewater treatment plants was due to resistance to biodegradation at low concentrations. A membrane bioreactor (MBR) has recently attracted attention as a new separation process for wastewater treatment in cities and industries because of its effectiveness in separating pollutants and its tolerance to high or shock loadings. In the current research, the main and interaction effects of three operating parameters, including hydraulic retention time (12–24 h), dissolved oxygen (1.5–5.5 mg/L), and sludge retention time (5–15 days), on removing carbamazepine, chemical oxygen demand, ammonia nitrogen, and phosphorus using ceramic membranes was investigated by applying a two-level full-factorial design analysis. Optimum dissolved oxygen, hydraulic retention time, and sludge retention time were 1.7 mg/L, 24 h, and 5 days, respectively. The research results showed the applicability of the MBR to wastewater treatment with a high carbamazepine loading rate and the removal of nutrients.

This study explores the effects of initial Cr(VI) concentration, wavelength, hole-scavenger (absence and presence of salicylic acid), and oxygen conditions (aeration by air, nitrogen gas, and mechanical stir only) on photocatalytic reduction of hexavalent chromium over titanium dioxide photocatalyst and the chromic species distribution after photocatalysis. The experimental results show the existence of strong interactions between these factors. The factor of hole-scavenger was more important than the UV light wavelength condition for a reduction of 3 mg Cr(VI) L⁻¹, whereas both factors became important when Cr(VI) concentration increased to 20 mgL⁻¹. The higher the UV wavelength was, the less the amount of chromium retained on the TiO₂ surface. The influence of oxygen-containing conditions in the solution on the reduction of 3 mgL⁻¹ Cr(VI) was unobvious, whereas its influence became remarkable for the reduction of 20 mgL⁻¹ Cr(VI) in the presence of SA. The interaction between oxygen-containing factor and other environmental factors, such as Cr(VI) concentration and scavenger presence (SA in this study), is a key factor about the degree of oxygen effect on Cr(VI) photo-reduction and the chromic species distribution. Simple stirring obtained better photocatalytic efficiency than aeration by air or nitrogen gas.

This study used high and low concentrations of glucose and acetic acid as carbon sources in two aerobic-anoxic-oxic (A₂O) processes. Trials were shock loaded with different concentrations of Cd²⁺. It was observed that the substrate utilization rate decreased when glucose concentration increased and thus the activated sludge of A₂O preferred acetic acid as a carbon source over glucose. Under anaerobic conditions, activated sludge readily transformed the substrate into poly-b-hydroxybutyrate (PHB) by the Entner–Douderoff (ED) pathway with ease, but not into poly-b-hydroxyvalerate (PHV) by the Embden–Meyerhof–Parnas (EMP) pathway. However, ED pathway was suppressed more severely by cadmium shock loading than that of the EMP pathway. The shock loading of Cd²⁺ greatly inhibited the anaerobic phosphate release rate with a half inhibition concentration of 10 mg L⁻¹ when acetic acid was used as a substrate. The phosphate removal efficiency of A₂O with acetic acid was affected by Cd²⁺ shock loading more than that of glucose. Therefore, A₂O with glucose as a substrate could tolerate the Cd²⁺ shock loading better than that of A₂O with acetic acid. This study also showed that polyphosphate accumulating organisms (PAOs) were more sensitive to Cd²⁺ toxicity than that of glycogen accumulating organisms (GAOs). With the addition of Cd²⁺, PHB/PHV synthesis/degradation was inhibited more apparently in acetic acid trials than that of glucose trials.

Due to various potential toxicological threats to living organisms even at low concentrations, pharmaceuticals and personal care products in natural water are seen as an emerging environmental issue. The low efficiency of removal of pharmaceuticals and personal care products by conventional wastewater treatment plants calls for more efficient technology. Research on advanced oxidation processes has recently become a hot topic as it has been shown that these technologies can effectively oxidize most organic contaminants to inorganic carbon through mineralization. Among the advanced oxidation processes, the electrochemical advanced oxidation processes and, in general, electrochemical oxidation or anodic oxidation have shown good prospects at the lab-scale for the elimination of contamination caused by the presence of residual pharmaceuticals and personal care products in aqueous systems. This paper reviewed the effectiveness of electrochemical oxidation in removing pharmaceuticals and personal care products from liquid solutions, alone or in combination with other treatment processes, in the last 10 years. Reactor designs and configurations, electrode materials, operational factors (initial concentration, supporting electrolytes, current density, temperature, pH, stirring rate, electrode spacing, and fluid velocity) were also investigated.