BMBandaru Mallikarjuna

Bandaru Mallikarjuna

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bandaru Mallikarjuna has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Physics-informed neural network modeling of ternary hybrid nanofluid flow over an inclined wavy surface

    by Chethan R, Bv Rathish Kumar, Bandaru Mallikarjuna, Sandeep Varma N

    Purpose: This study aims to develop an efficient Physics-Informed Neural Network (PINN) model for simulating the convective heat transfer of a viscous ternary hybrid nanofluid (THNF) flow over a wavy inclined surface on a porous medium. The suggested method gets around the shortcomings of classic numerical solvers that compute nonlinear heat transfer in complex geometries that are frequently found in heat exchangers, solar collectors and cooling systems. Design/methodology/approach: Continuity, momentum and energy governing equations are obtained under Boussinesq approximation of two THNFs of water-Cu-Al2O3-TiO2 and ethylene glycol-Cu-MWCNT-graphene oxide. It considers nondimensional parameters such as the Rayleigh number, inclination of the surface, wavy amplitude and the volume fractions of the nanoparticles. PINN is intended to use automatic differentiation of its loss, to impose physical law and boundary conditions to provide mesh-free approximation, modeled by a feed-forward and hyperbolic tangent activation neural network. The process of optimization is carried out by minimizing residual losses with the Adam optimizer, and validation of the model shows the variation of less than 0.2% compared to benchmark data in Nusselt number. Findings: It has been found that when wavy surfaces are large, convective heat transfer is reduced due to the restriction in fluid motions, and when the incline angles are high, heat transmission occurs through buoyancy forces. Increasing the concentration of nanoparticles is significantly effective in increasing the heat transfer. The thermal performance of Tnf1 is always better than that of Tnf2, and it is reasonable to note that it is suitable in high performing thermal management systems. Originality/value: PINNs is developed and used to compute the solutions of differential equations. Heat transfer enhancement due to two optimal sets of ternary hybrids nanofluid flow over an inclined wavy surface is investigate.

  • Open Access

    Natural Cubic Spline for Parabolic Equation with Constant and Variable Coefficients

    by M. Santoshi Kumari, Shrivalli H.Y., B. Mallikarjuna

    This research tackles solving a broad class of second-order partial differential equations (PDEs) with a novel method using natural cubic splines. These equations, crucial in science and engineering, describe phenomena like heat flow and wave propagation. The method works for both parabolic (diffusion) and hyperbolic (wave) equations, with a focus here on parabolic ones. The key idea lies in approximating the spatial derivatives in the PDE with the second derivative of a natural cubic spline function. Imagine a smooth curve broken into segments; natural cubic splines ensure these segments connect seamlessly while having zero second derivative at the joints. This makes them ideal for mimicking the solution's behavior. For the time derivatives, the paper employs a finite difference method. This approximates the derivative based on the function's values at specific time steps. By combining these approximations, the original PDE transforms into a system of solvable algebraic equations. The paper explores solving this system explicitly (directly calculating new solutions based on previous ones) and implicitly (solving a system of equations at each step). This offers flexibility, with explicit schemes being faster but potentially less stable, while implicit schemes provide more stability but require more computation. Finally, the paper validates the method's effectiveness through numerical examples with various boundary conditions (specifying the solution's behavior at domain edges). This showcases the method's applicability in real-world scenarios with different constraints. In conclusion, this research offers a valuable tool for solving diverse second-order PDEs. The method's ability to handle both constant and variable coefficients and its exploration of different solution strategies make it a versatile and adaptable approach.

  • Open Access

    Natural Cubic Spline for Hyperbolic Equations With Constant Coefficients

    by M. Santoshi Kumari, H. Y. Shrivalli, B. Mallikarjuna

    In this paper, we have considered second-order hyperbolic equations by implementing Natural Cubic Spline (NCS) method. Wave propagation and dynamic systems represents hyperbolic equations. We have considered the class of hyperbolic partial differential equations (PDEs) with constant coefficients and implemented NCS method both explicitly and implicitly. In our implementation we replaced spatial derivatives by second derivative of Natural cubic spline and time derivatives by central finite difference operator. To show the effectiveness of proposed method we have considered numerical examples having both Dirichlet and Neumann conditions. In order to evaluate the NCS method's performance in managing various boundary behaviours which are frequently seen in real-world applications like heat conduction issues or wave propagation in bounded domains. The results are represented graphically exhibiting the accuracy of proposed NCS method. To check the efficiency of the NCS method we compared the results with analytical solution. The research not only demonstrates the Natural Cubic Spline's flexibility in resolving hyperbolic PDEs, but also emphasizes its benefits, including its capacity to smooth spatial discretization, adjust to different boundary conditions, and work with both explicit and implicit time integration schemes. The findings verify that the NCS approach is a reliable tool for numerical simulations in domains where hyperbolic equations are used, including fluid dynamics, acoustics, and other domains.

  • Boundary Layer Convective Flow in a Divergent Channel With Melting Heat Transfer and Mass Suction/Injection: An Analysis Using ANN and Numerical Methods

    by S. Ramprasad, B. Mallikarjuna, Nagabhushana Pulla

    This study investigates magnetohydrodynamic fluids in converging and diverging channels, with a focus on melting heat transfer effects. The investigation utilizes a combination of numerical techniques, specifically the finite element Galerkin method, and artificial neural network (ANN) modeling to examine fluid flow behavior and thermal patterns in various channel configurations. Numerical explanations are provided for the effect of these factors on temperature, velocity, local skin friction, and Nusselt number distributions. Upon careful analysis and graphical presentation, the acquired data provide a significant understanding of how different physical parameters affect the flow properties. The contrast between the current and past findings reveals a good agreement. The findings have important applications in engineering fields where specific control of fluid flow and heat transfer is essential, including plastic sheet extrusion, electronic device cooling, and metal casting. Additionally, the research employs ANN to enhance the prediction of heat transfer characteristics, demonstrating a strong correlation between predicted and theoretical results. Accurate regulation of fluid flow and heat transmission is crucial in technical areas, such as metal casting, plastic sheet extrusion, and electronic device cooling.


  • Open Access

    Analysis of Cattaneo-Christov Heat Flux in Nanofluid, Hybrid, and Ternary Hybrid Nanofluid Flow Between Rotating Stretchable Disks

    by Nagarjuna Reddy P, Bandaru Mallikarjuna

    The behaviour of nanofluid, hybrid, and ternary hybrid nanofluid flow between stretchy, spinning discs is examined in this work using the Cattaneo-Christov heat flux model. The driving momentum and energy equations are found in a cylindrical polar coordinate system to show how the flow moves and how heat moves. Once these equations have been non-dimensionalized using suitable similarity transformations, the system is simplified, and analysis becomes easier. The spectral quasi-linearization method, a reliable computational approach appropriate for intricate fluid systems, is used to numerically solve the resulting equations. Several graphs and tables that show how different physical parameters affect flow and thermal behaviour are used to convey the results. Interestingly, the findings show that hybrid nanofluids with aluminium alloys have better flow properties than ternary hybrid nanofluids and simple nanofluids. This improved performance demonstrates the promise of hybrid nanofluids based on aluminium as high-conductivity fluids, which makes them especially beneficial for sectors needing effective thermal control. Since aluminum-alloy hybrid nanofluids have superior conducting qualities, the study advises that businesses that are interested in improving their cooling systems should give serious consideration to implementing them.


  • The study of heat transfer enhancement due to various nanofluids between rotating stretchable disks

    by B. Mallikarjuna, P. Hari Prasad, G. Saravanakumar

    In this paper the convective flow of various nanofluids (Cu, CuO, Al2O3, TiO2, Fe3O4) across rotating stretchable disks has been investigated theoretically. Stretchable disks are maintained with uniform constant angular velocities. The similarity transformations are used to non-dimensionalize the governing equations and then solved numerically. The computational results are depicted graphically and discussed for various physical parameter. It is worthy to mention the important observation in this investigation that higher temperature is taken place for Al2O3 or TiO2. The influence of Re, Prandtl number, stretching parameter and rotating parameter on radial, tangential and temperature profiles are presented with the assist of graphs. Increasing the values of ϕ leads to enhance Nusselt number (rate of heat transfer) and skin friction coefficient along both the disks. Skin friction coefficient remains constant for increasing values of Prandtl’s number where as Nusselt number increases at both disks. Tangential velocity and temperature profiles increases for increasing values of rotation parameter (Ω). Increasing stretchable disks parameter exhibits reverse trend behavior on physical quantities at different disks. For higher values of ϕ radial velocity decreases up to ɳ=0.5 and then increases.

  • Nanoscience and its role in the future of solar stills

    by Ahmed Kadhim Hussein, Lioua Kolsi, Mohammed El Hadi Attia, Obai Younis, Uddhaba Biswal, Hafiz Muhammad Ali, Bagh Ali, Mehran Hashemian, B. Mallikarjuna, Rasoul Nikbakhti

  • Numerical and Linear Regression Analysis of Slip Effects on Magnetohydrodynamics (MHD) Convective Cu-Water Nanofluid Flow in a Channel with Stretchable Walls

    by Y. S. Kalyan Chakravarthy, S. Ram Prasad, B. Mallikarjuna, R. Suresh Babu

    This paper is aimed to study the impact of 2nd order velocity and 2nd order thermal slip on the heat transfer flow of hydromagnetic nanofluid through the horizontal channel with stretching walls. The water-based Cu nanoparticle is considered to analyze the heat transfer enhancement. The channel is considered to be fully developed with an incompressible nanofluid. A standard similarity transformation is used to non-dimensionalize and then solved by numerical technique. An admirable agreement has been noticed on correlating the present results with published results in limiting cases. The profiles of velocity and temperature are discussed through plots for various non-dimensional parameters like magnetic parameter radiation parameter (Rd), solid volume fraction (phi)), Prandtl number (Pr) on fluid velocity and temperature profiles. One of the statistical tools, linear regression has been used to analyze the drag coefficient and Nusselt number at the walls (between walls to the fluid) under various slip effects and magnetic force.It is observed that an augmentation in volume fraction lessens the velocity in all the cases (no slip, first and slip of order of two). This study is mainly applicable in nuclear reactors and biomedical applications like nano-drug delivery, cancer therapeutics and, etc.


  • Spectral Numerical Study of Entropy Generation in Magneto-Convective Viscoelastic Biofluid Flow Through Poro-Elastic Media With Thermal Radiation and Buoyancy Effects

    by B. Mallikarjuna, J. Srinivas, G. Gopi Krishna, O. Anwar Bég, Ali Kadir

    Electromagnetic high-temperature therapy is popular in medical engineering treatments for various diseases including tissue damage ablation repair, hyperthermia, and oncological illness diagnosis. The simulation of transport phenomena in such applications requires multi-physical models featuring magnetohydrodynamics, biorheology, heat transfer, and deformable porous media. Motivated by investigating the fluid dynamics and thermodynamic optimization of such processes, in the present article, a mathematical model is developed to study the combined influence of thermal buoyancy, magnetic field and thermal radiation on the entropy generation, and momentum and heat transfer characteristics in electrically conducting viscoelastic biofluid flow through a vertical deformable porous medium. It is assumed that heat is generated within the fluid by both viscous and Darcy (porous matrix) dissipations. The governing equations for fluid velocity, solid displacement, and temperature are formulated. The boundary value problem is normalized with appropriate transformations. The nondimensional biofluid velocity, solid displacement, and temperature equations with appropriate boundary conditions are solved computationally using a spectral method. Verification of accuracy is conducted via monitoring residuals of the solutions. The effects of various parameters on flow velocity, solid displacement, temperature, and entropy generation are depicted graphically and discussed. Increasing magnetic field and drag parameters are found to reduce the field velocity, solid displacement, temperature, and entropy production. Entropy production is enhanced with an increase in buoyancy parameter and volume fraction of the fluid. The novelty of the work is the simultaneous inclusion of multiple thermophysical phenomena, and the consideration of thermodynamic optimization in coupled thermal/fluid/elastic media. The computations provide an insight into multiphysical transport in electromagnetic radiative tissue ablation therapy and a good benchmark for more advanced simulations.