Pedro Martí-Aldaraví
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pedro Martí-Aldaraví has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Raul Payri
Universitat Politécnica de Valencia, Valencia, Spain
13 shared publications - Jaime Gimeno
CMT-Motores Térmicos, Universitat Politècnica de València, Valencia, Spain
5 shared publications - Gabriela Bracho
Universitat Politècnica de València Camino de Vera s/n
2 shared publications - Marcos Carreres
Universitat Politècnica de València
2 shared publications A. Lozano
1 shared publication- Abian Bautista1 shared publication
Latest Publications
- Open Access
- 20 February 2026
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (9) , 4777-4792
Fuel Effects on Aviation Engine Emissions: A Chemical Reactor Network Modeling Study
The present study investigates the formulation of surrogates for Jet-A and sustainable aviation fuel (SAF) by means of a chemical reactor network (CRN) to predict emissions in gas-turbine combustors. The modeling framework is used to analyze the effects of fuel composition, specifically the replacement of Jet-A with SAF as well as the substitution of aromatics in Jet-A with cycloalkanes. This approach enables the examination of the effects of the fuel class and molecular structure independently of global exhaust emission trends. A comprehensive chemical kinetic mechanism incorporating 8478 species and 33,318 reactions was used to model jet fuel surrogates. This mechanism, validated against ignition delay times, laminar flame speeds, and extinction strain rates, accurately predicted combustion characteristics for iso-cetane and iso-dodecane, key components of SAF. Surrogate fuels for Jet-A and alternative fuels were formulated targeting critical properties such as density and cetane number. Surrogate simulation results show strong alignment with experimental data on ignition delay and flame speed, further confirming the reliability of the surrogates. The CRN model was developed using the CFM56 engine data and validated against the International Civil Aviation Organization emission benchmarks. After that, two different fuel replacement scenarios, involving Jet-A, are investigated. In the first one, Jet-A is compared to 100% SAF, which helps assess expected differences in combustion performance if a fully renewable fueling supply is followed. Results show that NO x emissions are unaffected by SAF, aligning with previous experimental studies. Polycyclic aromatic hydrocarbons (PAH) decrease by 93% for SAF compared to Jet-A, while Jet-A produces more CO due to its aromatic content. Substituting aromatics with cycloalkanes in Jet-A reduces PAH emissions by up to 96 or 92%, depending on whether all aromatics are replaced or only diaromatics. In a second scenario, aromatics are removed from conventional Jet-A and replaced with cycloalkane species, which can still hold the swelling properties needed by the fueling system. In terms of combustion, cycloalkane substitution leads to slightly increased CO emissions and reduced flame temperatures. These results demonstrate the potential of SAFs and cycloalkanes in reducing soot precursors while maintaining a highly similar performance in the combustion process. Overall, the proposed CRN framework provides a good example of how a predictive and computationally efficient tool can help in the early evaluation of alternative aviation fuels under realistic gas-turbine combustor conditions.
- 20 February 2026
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (9) , 4777-4792
Open AccessFuel Effects on Aviation Engine Emissions: A Chemical Reactor Network Modeling Study
The present study investigates the formulation of surrogates for Jet-A and sustainable aviation fuel (SAF) by means of a chemical reactor network (CRN) to predict emissions in gas-turbine combustors. The modeling framework is used to analyze the effects of fuel composition, specifically the replacement of Jet-A with SAF as well as the substitution of aromatics in Jet-A with cycloalkanes. This approach enables the examination of the effects of the fuel class and molecular structure independently of global exhaust emission trends. A comprehensive chemical kinetic mechanism incorporating 8478 species and 33,318 reactions was used to model jet fuel surrogates. This mechanism, validated against ignition delay times, laminar flame speeds, and extinction strain rates, accurately predicted combustion characteristics for iso-cetane and iso-dodecane, key components of SAF. Surrogate fuels for Jet-A and alternative fuels were formulated targeting critical properties such as density and cetane number. Surrogate simulation results show strong alignment with experimental data on ignition delay and flame speed, further confirming the reliability of the surrogates. The CRN model was developed using the CFM56 engine data and validated against the International Civil Aviation Organization emission benchmarks. After that, two different fuel replacement scenarios, involving Jet-A, are investigated. In the first one, Jet-A is compared to 100% SAF, which helps assess expected differences in combustion performance if a fully renewable fueling supply is followed. Results show that NO x emissions are unaffected by SAF, aligning with previous experimental studies. Polycyclic aromatic hydrocarbons (PAH) decrease by 93% for SAF compared to Jet-A, while Jet-A produces more CO due to its aromatic content. Substituting aromatics with cycloalkanes in Jet-A reduces PAH emissions by up to 96 or 92%, depending on whether all aromatics are replaced or only diaromatics. In a second scenario, aromatics are removed from conventional Jet-A and replaced with cycloalkane species, which can still hold the swelling properties needed by the fueling system. In terms of combustion, cycloalkane substitution leads to slightly increased CO emissions and reduced flame temperatures. These results demonstrate the potential of SAFs and cycloalkanes in reducing soot precursors while maintaining a highly similar performance in the combustion process. Overall, the proposed CRN framework provides a good example of how a predictive and computationally efficient tool can help in the early evaluation of alternative aviation fuels under realistic gas-turbine combustor conditions.
- Open Access
- 24 May 2024
- Published by Elsevier in Combustion and Flame
- Vol. 266
Effect of inter-jet spacing on soot formation in the direct injection diesel combustion process
- 24 May 2024
- Published by Elsevier in Combustion and Flame
- Vol. 266
Open AccessEffect of inter-jet spacing on soot formation in the direct injection diesel combustion process
- Open Access
- 20 July 2023
- Published by Elsevier in Applied Thermal Engineering
- Vol. 234
Evaluation of GDI spray structures under flash boiling and strong collapse conditions with diverse fuels
- 20 July 2023
- Published by Elsevier in Applied Thermal Engineering
- Vol. 234
Open AccessEvaluation of GDI spray structures under flash boiling and strong collapse conditions with diverse fuels
- Open Access
- 23 September 2021
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 60 (39) , 14329-14340
Numerical Analysis of Urea to Ammonia Conversion in Automotive Selective Catalytic Reduction Realistic Conditions
The selective catalytic reduction (SCR) is a technology employed for NOx reduction purposes which is based on the injection of an Urea Water Solution (UWS) into the exhaust line. Conversion of this injected urea into ammonia is a key step to ensure high SCR efficiency. In order to study this phenomenon, a three-dimensional model of the urea–water injection process has been created to recreate realistic conditions. A Lagrangian–Eulerian approach has been followed to model liquid and gas phases, respectively. Droplet evaporation as well as relevant chemical processes have been included to recreate the thermolysis and hydrolysis phenomena, and the results have been validated against literature data. Then, the validated model has been applied to recreate an in-house experimental facility that measured spray macroscopic and microscopic characteristics by means of diffused back illumination (DBI) visualization. Probability density functions of the UWS droplet sizes as well as the velocity distributions have been obtained at three different regions of interest to be compared with the experimental data set. Contours of isocyanic acid and ammonia mass fractions have been included to show the chemical transformation from urea into its products. The model accurately replicates the experimental results, and it stands as a good methodology to predict the main spray characteristics as well as the chemical processes that take place in actual SCR systems.
- 23 September 2021
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 60 (39) , 14329-14340
Open AccessNumerical Analysis of Urea to Ammonia Conversion in Automotive Selective Catalytic Reduction Realistic Conditions
The selective catalytic reduction (SCR) is a technology employed for NOx reduction purposes which is based on the injection of an Urea Water Solution (UWS) into the exhaust line. Conversion of this injected urea into ammonia is a key step to ensure high SCR efficiency. In order to study this phenomenon, a three-dimensional model of the urea–water injection process has been created to recreate realistic conditions. A Lagrangian–Eulerian approach has been followed to model liquid and gas phases, respectively. Droplet evaporation as well as relevant chemical processes have been included to recreate the thermolysis and hydrolysis phenomena, and the results have been validated against literature data. Then, the validated model has been applied to recreate an in-house experimental facility that measured spray macroscopic and microscopic characteristics by means of diffused back illumination (DBI) visualization. Probability density functions of the UWS droplet sizes as well as the velocity distributions have been obtained at three different regions of interest to be compared with the experimental data set. Contours of isocyanic acid and ammonia mass fractions have been included to show the chemical transformation from urea into its products. The model accurately replicates the experimental results, and it stands as a good methodology to predict the main spray characteristics as well as the chemical processes that take place in actual SCR systems.
- Open Access
Numerical Analysis of GDI Flash Boiling Sprays Using Different Fuels
Modeling the fuel injection process in modern gasoline direct injection engines plays a principal role in characterizing the in–cylinder mixture formation and subsequent combustion process. Flash boiling, which usually occurs when the fuel is injected into an ambient pressure below the saturation pressure of the liquid, is characterized by fast breakup and evaporation rates but could lead to undesired behaviors such as spray collapse, which significantly effects the mixture preparation. Four mono–component fuels have been used in this study with the aim of achieving various flashing behaviors utilizing the Spray G injector from the Engine Combustion Network (ECN). The numerical framework was based on a Lagrangian approach and was first validated for the baseline G1 condition. The model was compared with experimental vapor and liquid penetrations, axial gas velocity, droplet sizes and spray morphology and was then extended to the flash boiling condition for iso–octane, n–heptane, n–hexane, and n–pentane. A good agreement was achieved for most of the fuels in terms of spray development and shape, although the computed spray morphology of pentane was not able to capture the spray collapse. Overall, the adopted methodology is promising and can be used for engine combustion modeling with conventional and alternative fuels.
Open AccessNumerical Analysis of GDI Flash Boiling Sprays Using Different Fuels
Modeling the fuel injection process in modern gasoline direct injection engines plays a principal role in characterizing the in–cylinder mixture formation and subsequent combustion process. Flash boiling, which usually occurs when the fuel is injected into an ambient pressure below the saturation pressure of the liquid, is characterized by fast breakup and evaporation rates but could lead to undesired behaviors such as spray collapse, which significantly effects the mixture preparation. Four mono–component fuels have been used in this study with the aim of achieving various flashing behaviors utilizing the Spray G injector from the Engine Combustion Network (ECN). The numerical framework was based on a Lagrangian approach and was first validated for the baseline G1 condition. The model was compared with experimental vapor and liquid penetrations, axial gas velocity, droplet sizes and spray morphology and was then extended to the flash boiling condition for iso–octane, n–heptane, n–hexane, and n–pentane. A good agreement was achieved for most of the fuels in terms of spray development and shape, although the computed spray morphology of pentane was not able to capture the spray collapse. Overall, the adopted methodology is promising and can be used for engine combustion modeling with conventional and alternative fuels.
- 31 March 2021
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 43 (4) , 1-15
Validation of a three-phase Eulerian CFD model to account for cavitation and spray atomization phenomena
- 31 March 2021
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 43 (4) , 1-15
Validation of a three-phase Eulerian CFD model to account for cavitation and spray atomization phenomena
- 1 January 2021
- Published by Begell House Inc. Publishers in Atomization and Sprays
- Vol. 31 (9) , 49-73
LARGE EDDY SIMULATION FOR THE PREDICTION OF HUMAN COUGHING
The health awareness that has arisen from the COVID pandemic has been translated into interest in studying the contagion methods of airborne viruses. The cough mechanism is one cause of virion spread. To analyze this phenomenon, computational fluid dynamics (CFD) simulations of the human cough have been set up in closed room conditions. Fundamental droplet, air, and thermodynamic conditions for the problem have been extracted from the literature and applied to the simulations performed. Three typologies of cough have been computed corresponding to the maximum, minimum, and mean peak cough velocities of the human being, and their corresponding injection profiles. Coughs were simulated in transient conditions and the droplets were tracked following an Eulerian-Lagrangian approach and large eddy simulation (LES) formulation for the turbulence phenomenon. Results revealed droplet travel distances of almost 2 m for the strongest cough case. Also, the presence of droplets smaller than 5 μm of diameter, the main virus spreader, was considerably larger than particles of bigger size. Additionally, most of the droplets evaporate or fall to the ground within 2 s after their injection. The remaining ones that stayed above the waistline or remained suspended in the air followed trajectories coming from buoyancy effects rather than being driven by the initial velocity profile. Moreover, it was found how almost the totality of the droplets expelled followed a trajectory towards the floor. Droplets that did not evaporate during the fluid injection became airborne for at least 5 seconds after the coughing.
- 1 January 2021
- Published by Begell House Inc. Publishers in Atomization and Sprays
- Vol. 31 (9) , 49-73
LARGE EDDY SIMULATION FOR THE PREDICTION OF HUMAN COUGHING
The health awareness that has arisen from the COVID pandemic has been translated into interest in studying the contagion methods of airborne viruses. The cough mechanism is one cause of virion spread. To analyze this phenomenon, computational fluid dynamics (CFD) simulations of the human cough have been set up in closed room conditions. Fundamental droplet, air, and thermodynamic conditions for the problem have been extracted from the literature and applied to the simulations performed. Three typologies of cough have been computed corresponding to the maximum, minimum, and mean peak cough velocities of the human being, and their corresponding injection profiles. Coughs were simulated in transient conditions and the droplets were tracked following an Eulerian-Lagrangian approach and large eddy simulation (LES) formulation for the turbulence phenomenon. Results revealed droplet travel distances of almost 2 m for the strongest cough case. Also, the presence of droplets smaller than 5 μm of diameter, the main virus spreader, was considerably larger than particles of bigger size. Additionally, most of the droplets evaporate or fall to the ground within 2 s after their injection. The remaining ones that stayed above the waistline or remained suspended in the air followed trajectories coming from buoyancy effects rather than being driven by the initial velocity profile. Moreover, it was found how almost the totality of the droplets expelled followed a trajectory towards the floor. Droplets that did not evaporate during the fluid injection became airborne for at least 5 seconds after the coughing.