OEOmar Faruk Emon

Omar Faruk Emon

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Omar Faruk Emon has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Multi-material 3D printing of a soft pressure sensor

    by Omar Faruk Emon, Faez Alkadi, Daryl George Philip, Da-Hye Kim, Kyung-Chang Lee, Jae-Won Choi


  • Characterization of a Soft Pressure Sensor on the Basis of Ionic Liquid Concentration and Thickness of the Piezoresistive Layer

    by Omar Faruk Emon, Jeongwoo Lee, U Hyeok Choi, Da-Hye Kim, Kyung-Chang Lee, Jae-Won Choi

    A stretchable pressure sensitive piezoresistive film was fabricated through the polymerization of a mixture containing an ionic liquid (1-ethyl-3-methyl-imidazolium tetrafluoroborate) and a commercially available 3D printable photopolymer. This piezoresistive layer was placed between two carbon-nanotube (CNT) based stretchable electrodes and was encapsulated with stretchable top and bottom insulating layers to form a multilayer piezoresistive pressure sensor. The intersecting electrodes create a sensing unit, referred to as a taxel. The sensor was connected to a Wheatstone half-bridge circuit, and a normal force was applied on the taxel to evaluate the sensor in terms of change in electrical resistance as the sensor underwent deformation. Sensor performance was investigated for various concentrations of ionic liquid (IL) and thicknesses of the intermediate piezoresistive layer. The experimental results showed that the IL concentration and the thickness of the intermediate layer affect the sensitivity of the sensor. Next, various forces were applied to a sensor that was fabricated using reasonable values for IL concentration and layer thickness to determine the reliability and responsiveness. The proposed IL-based sensor displayed superior performance with high sensitivity and reliability. While the sensors for these experiments were manufactured using screen printing and molding processes, the materials used for sensor fabrication are 3D printable, as 3D printing is the target manufacturing technique for stretchable pressure sensors in the future.


  • Liquid bridge microstereolithography

    by Jeongwoo Lee, Yanfeng Lu, Sumanth Kashyap, Aslan Alarmdari, Omar Faruk Emon, Jae-Won Choi


  • A Preliminary Study on 3D Printed Smart Insoles With Stretchable Piezoresistive Sensors for Plantar Pressure Monitoring

    by Omar Faruk Emon, Jae-Won Choi

    In this report, we present a 3D printed insole which has multiple soft pressure sensors inserted in it to detect the force on the sole including heel, midfoot, and forefoot as well as timing and location of the strike while walking. The insole was 3D printed using a soft and flexible material having multiple open channels on it to attach sensors. Flexible and stretchable piezoresistive sensors were fabricated via screen printing and molding processes. The multi-layer sensor comprises an ionic liquid (IL) based piezoresistive layer sandwiched between two multi-walled carbon nanotube (MWCNT) based stretchable electrodes and finally, top and bottom insulation layers. The sensor was constructed using 3D printable photopolymer as 3D printing is our target manufacturing technique to build the entire structure including insole. The sensor embedded insole was evaluated for different foot landing conditions such as heel strike, midfoot strike, and forefoot strike. Experimental results showed that the developed insole could indicate the amount of force on insole when foot hits ground, with timing and location of the strike.


  • Development and Characterizations of Liquid Bridge Based Microstereolithography (LBMSL) System

    by Yanfeng Lu, Jeongwoo Lee, Sumanth Kashyap, Omar Faruk Emon, Jae-Won Choi

    In this work, a novel liquid bridge based microstereolithography (LBMSL) was proposed and developed. The liquid bridge was first introduced into the MSL process by replacing the vat, allowing the entire fabrication process to occur within the liquid bridge. The liquid bridge was studied theoretically and experimentally in order to obtain the stable equilibrium shape and the relationship between the height and the volume of the liquid bridge. Using the LBMSL process, the fabrication layer thickness of 0.5 μm was reached. This could not be easily achieved in the vat-based MSL due to the oxygen inhibition to the photopolymer. Fabrication of a photopolymer with a viscosity of 3000 cP was tested and significant results were obtained. Compared with the vat-based MSL, the material consumption in LBMSL was reduced and the fabrication time was improved greatly, in particular, when using higher viscous materials.

  • Open Access

    Flexible Piezoresistive Sensors Embedded in 3D Printed Tires

    by Omar Faruk Emon, Jae-Won Choi

    In this article, we report the development of a flexible, 3D printable piezoresistive pressure sensor capable of measuring force and detecting the location of the force. The multilayer sensor comprises of an ionic liquid-based piezoresistive intermediate layer in between carbon nanotube (CNT)-based stretchable electrodes. A sensor containing an array of different sensing units was embedded on the inner liner surface of a 3D printed tire to provide with force information at different points of contact between the tire and road. Four scaled tires, as well as wheels, were 3D printed using a flexible and a rigid material, respectively, which were later assembled with a 3D-printed chassis. Only one tire was equipped with a sensor and the chassis was driven through a motorized linear stage at different speeds and load conditions to evaluate the sensor performance. The sensor was fabricated via molding and screen printing processes using a commercially available 3D-printable photopolymer as 3D printing is our target manufacturing technique to fabricate the entire tire assembly with the sensor. Results show that the proposed sensors, inserted in the 3D printed tire assembly, could detect forces, as well as their locations, properly.


  • Effect of degree of crosslinking and polymerization of 3D printable polymer/ionic liquid composites on performance of stretchable piezoresistive sensors

    by Jeongwoo Lee, Md Omar Faruk Emon, Morteza Vatani, Jae-Won Choi

    Ionic liquid (IL)/polymer composites (1-ethyl-3-methyl-imidazolium tetrafluoroborate (EMIMBF 4 )/2-[[(butylamino)carbonyl]oxy]ethyl acrylate (BACOEA)) were fabricated to use as sensing materials for stretchable piezoresistive tactile sensors. The detectability of the IL/polymer composites was enhanced because the ionic transport properties of EMIMBF 4 in the composites were improved by the synergic actions between the coordinate sites generated by the local motion of BACOEA chain segments under enough activation energy. The performance of the piezoresistive sensors was investigated with the degree of crosslinking and polymerization of the IL/polymer composites. As the compressive strain was increased, the distance between two electrodes decreased, and the motion of polymer chains and IL occurred, resulting in a decrease in the electrical resistance of the sensors. We have confirmed that the sensitivity of the sensors are affected by the degree of crosslink and polymerization of the IL/polymer composites. In addition, all of the materials (skins, sensing material, and electrode) used in this study are photo-curable, and thus the stretchable piezoresistive tactile sensors can be successfully fabricated by 3D printing.