Tejinder Singh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tejinder Singh has a total of 73 co-authors. Here are the top co-authors by number of shared publications:
- Raafat R. Mansour
University of Waterloo
17 shared publications - Navjot K. Khaira
Department of Electrical and Computer Engineering, Centre for Integrated RF Engineering (CIRFE), University of Waterloo, Waterloo, ON, Canada
12 shared publications Raafat R. Mansour
Department of Electrical and Computer Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada
9 shared publicationsAmritpal Singh
Discipline of Electronics and Electrical Engineering, Lovely Professional University, Phagwara 144 402, PB, India
2 shared publications- Irfan Ahmad Pindoo
Discipline of Electronics and Electrical Engineering, Lovely Professional University, Phagwara 144 402, PB, India
2 shared publications Jitendra S. Sengar
2 shared publications
Latest Publications
- Open Access
- 12 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 75457-75468
Experimental Verification of Millimeter-Wave Beamforming Using an Embedded-Source-Excited Metasurface via Auxiliary Surface-Wave Excitation
Electromagnetic metasurfaces (MTSs) have been widely utilized for systematic wavefront transformation to enhance wireless communication through transmission and reflection. By embedding active radiating sources into the MTS, a more compact and integrated antenna system can be realized. In this work, we utilize a design framework based on the method of moments and optimization, for implementing impedance MTSs with embedded sources. This framework is utilized to develop a physical realization of the required impedance sheet and embedded line source at millimeter-wave (mmWave) frequencies. The incident power, which is initially concentrated near the source, is efficiently redistributed across the entire surface with the assistance of auxiliary surface waves. We demonstrate the effectiveness of the proposed approach through numerical examples that achieve beamforming up to 60° and a slightly over 100% aperture illumination efficiency. The proposed approach is further validated with experimental results at mmWave frequencies. The fabricated MTS antenna operates at 25.65 GHz, demonstrate beam pointing at 30°, and achieve an illumination efficiency of 65%.
- 12 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 75457-75468
Open AccessExperimental Verification of Millimeter-Wave Beamforming Using an Embedded-Source-Excited Metasurface via Auxiliary Surface-Wave Excitation
Electromagnetic metasurfaces (MTSs) have been widely utilized for systematic wavefront transformation to enhance wireless communication through transmission and reflection. By embedding active radiating sources into the MTS, a more compact and integrated antenna system can be realized. In this work, we utilize a design framework based on the method of moments and optimization, for implementing impedance MTSs with embedded sources. This framework is utilized to develop a physical realization of the required impedance sheet and embedded line source at millimeter-wave (mmWave) frequencies. The incident power, which is initially concentrated near the source, is efficiently redistributed across the entire surface with the assistance of auxiliary surface waves. We demonstrate the effectiveness of the proposed approach through numerical examples that achieve beamforming up to 60° and a slightly over 100% aperture illumination efficiency. The proposed approach is further validated with experimental results at mmWave frequencies. The fabricated MTS antenna operates at 25.65 GHz, demonstrate beam pointing at 30°, and achieve an illumination efficiency of 65%.
- 3 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (6) , 2396-2400
Optically Transparent mmWave Metasurface Reflector With a Honeycomb-Meshed Ground Plane
An optically transparent, millimeter-wave (mmWave) metasurface reflector is proposed and experimentally demon strated using a simple metal meshing approach with fine-metal line (FML) structures. The design features a fused silica (FS) substrate, a honeycomb-meshed aluminum ground plane, and hexagonal ring resonators with 25 μm line width. Characterized in a compact antenna test range (CATR) as a reflectarray antenna (RA) with a conical horn feed, the metasurface achieved a peak gain of 15.95 dB, side lobe level (SLL) of-11.01 dB, and optical transparency of approximately 77.4%. Full-wave simulations further indicate performance scalability with larger apertures. The proposed metasurface offers a promising platform for transparent, high-performance 5G beamformers that can support monolithic integration of dynamic thin-film technologies, making it ideal for aesthetic deployment in urban environments.
- 3 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (6) , 2396-2400
Optically Transparent mmWave Metasurface Reflector With a Honeycomb-Meshed Ground Plane
An optically transparent, millimeter-wave (mmWave) metasurface reflector is proposed and experimentally demon strated using a simple metal meshing approach with fine-metal line (FML) structures. The design features a fused silica (FS) substrate, a honeycomb-meshed aluminum ground plane, and hexagonal ring resonators with 25 μm line width. Characterized in a compact antenna test range (CATR) as a reflectarray antenna (RA) with a conical horn feed, the metasurface achieved a peak gain of 15.95 dB, side lobe level (SLL) of-11.01 dB, and optical transparency of approximately 77.4%. Full-wave simulations further indicate performance scalability with larger apertures. The proposed metasurface offers a promising platform for transparent, high-performance 5G beamformers that can support monolithic integration of dynamic thin-film technologies, making it ideal for aesthetic deployment in urban environments.
- 10 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 25 (2) , 18-38
Phase-Change RF Devices for Future Communications: Phase-Change Materials and Devices for Reconfigurable RF Front-Ends: State-of-the-Art and Future Perspectives
Miniature, reliable, and high-performance RF switches are needed to configure antennas, matching networks, phase shifters, filters, and multiband amplifiers in RF front-end modules. RF switches are therefore the fundamental building blocks for realizing reconfigurable front ends in wireless and satellite communication systems. The ability to integrate phase-change switches monolithically/heterogeneously with various other technologies without any need for special packaging makes pulse-code modulation (PCM) technology affordable and attractive for implementation of reconfigurable RF components for wireless communication systems. This article highlights state-of-the-art phase-change RF switches and various monolithically integrated reconfigurable devices for future communications.
- 10 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 25 (2) , 18-38
Phase-Change RF Devices for Future Communications: Phase-Change Materials and Devices for Reconfigurable RF Front-Ends: State-of-the-Art and Future Perspectives
Miniature, reliable, and high-performance RF switches are needed to configure antennas, matching networks, phase shifters, filters, and multiband amplifiers in RF front-end modules. RF switches are therefore the fundamental building blocks for realizing reconfigurable front ends in wireless and satellite communication systems. The ability to integrate phase-change switches monolithically/heterogeneously with various other technologies without any need for special packaging makes pulse-code modulation (PCM) technology affordable and attractive for implementation of reconfigurable RF components for wireless communication systems. This article highlights state-of-the-art phase-change RF switches and various monolithically integrated reconfigurable devices for future communications.
- 10 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 25 (2) , 14-15
Unleashing Next-Gen Innovations: Phase-Change Materials for RF and Acoustic Devices [From the Guest Editors’ Desk]
In this curated RF focus issue of IEEE Microwave Magazin e, we embark on an explorative journey into the dynamic and burgeoning world of phase-change material (PCM)-based RF and acoustic devices. These innovative materials have exhibited unprecedented potential in enhancing the performance, versatility, and functionality of a myriad of devices, paving the way for groundbreaking advancements in RF/microwave applications. Under the esteemed guidance and support of the IEEE Microwave Theory and Technology Society (MTT-S) Technical Committee-6 (TC-6), it is our pleasure to present to you a comprehensive collection of articles, each serving as a beacon of knowledge, highlighting the state-of-the-art developments and vast potential encapsulated within PCM-based technologies.
- 10 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 25 (2) , 14-15
Unleashing Next-Gen Innovations: Phase-Change Materials for RF and Acoustic Devices [From the Guest Editors’ Desk]
In this curated RF focus issue of IEEE Microwave Magazin e, we embark on an explorative journey into the dynamic and burgeoning world of phase-change material (PCM)-based RF and acoustic devices. These innovative materials have exhibited unprecedented potential in enhancing the performance, versatility, and functionality of a myriad of devices, paving the way for groundbreaking advancements in RF/microwave applications. Under the esteemed guidance and support of the IEEE Microwave Theory and Technology Society (MTT-S) Technical Committee-6 (TC-6), it is our pleasure to present to you a comprehensive collection of articles, each serving as a beacon of knowledge, highlighting the state-of-the-art developments and vast potential encapsulated within PCM-based technologies.
- 17 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 28 (1) , 113-117
Efficient Power Allocation Strategies in Hybrid Active-Passive Reconfigurable Intelligent Surfaces
Hybrid active-passive RIS incorporates a fixed number of active elements that serve the dual purpose of reflecting and amplifying incoming signals, resulting in a substantial enhancement of system performance under reduced requirements on the overall power consumption. To date, most of the existing research on active-passive RIS-aided systems has not focused on optimizing the number of active elements on the reflective surfaces. Furthermore, the classical problem of maximizing the achievable rate of a hybrid RIS-enhanced single-input single-output (SISO) communication by splitting the power assigned to the transmitter and RIS is commonly overlooked. In this paper, we propose an algorithm that maximizes the signal-to-noise ratio at the user by optimizing the number of active loads, the complex-valued reflection coefficients at the RIS array, and the transmit power at the access point. Towards a fairness-oriented design, we compare the performance provided by passive RIS, active RIS, and hybrid RIS. Extensive simulation results demonstrate that hybrid RIS would be superior in scenarios where the overall power allocated to the system is significantly small.
- 17 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 28 (1) , 113-117
Efficient Power Allocation Strategies in Hybrid Active-Passive Reconfigurable Intelligent Surfaces
Hybrid active-passive RIS incorporates a fixed number of active elements that serve the dual purpose of reflecting and amplifying incoming signals, resulting in a substantial enhancement of system performance under reduced requirements on the overall power consumption. To date, most of the existing research on active-passive RIS-aided systems has not focused on optimizing the number of active elements on the reflective surfaces. Furthermore, the classical problem of maximizing the achievable rate of a hybrid RIS-enhanced single-input single-output (SISO) communication by splitting the power assigned to the transmitter and RIS is commonly overlooked. In this paper, we propose an algorithm that maximizes the signal-to-noise ratio at the user by optimizing the number of active loads, the complex-valued reflection coefficients at the RIS array, and the transmit power at the access point. Towards a fairness-oriented design, we compare the performance provided by passive RIS, active RIS, and hybrid RIS. Extensive simulation results demonstrate that hybrid RIS would be superior in scenarios where the overall power allocated to the system is significantly small.
- 14 June 2023
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12535, 64-76
Optimized phase shifts in intelligent reflective surfaces for robust radar-based indoor coverage enhancement
Intelligent reflective surfaces (IRS) have garnered significant attention due to their potential to intelligently shape the wireless environment for beyond-fifth and sixth-generation wireless communication and sensing. IRSs modify radio channels by dynamically adjusting the phase shifts of reflected signals, thereby enhancing signal reception and suppressing interference. For robust beam steering and signal-to-noise ratio optimization, the IRS’s phase profile must be accurately estimated and optimized. This work presents a unique approach for estimating the position and orientation of an indoor IRS using active tags and optimizing the phase shifts with a tag-FMCW radar system for robust radar-based IRS-assisted indoor coverage enhancement. The proposed method offers a practical scheme for localizing the IRS elements and calculating the phase delays effectively, ultimately improving the overall performance of IRS-assisted wireless networks. For implementation, we proposed non-volatile phase-change radio-frequency switches that can operate over a broad range and can provide flexibility in implementation from DC to 67 GHz for 5G-Advanced applications.
- 14 June 2023
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12535, 64-76
Optimized phase shifts in intelligent reflective surfaces for robust radar-based indoor coverage enhancement
Intelligent reflective surfaces (IRS) have garnered significant attention due to their potential to intelligently shape the wireless environment for beyond-fifth and sixth-generation wireless communication and sensing. IRSs modify radio channels by dynamically adjusting the phase shifts of reflected signals, thereby enhancing signal reception and suppressing interference. For robust beam steering and signal-to-noise ratio optimization, the IRS’s phase profile must be accurately estimated and optimized. This work presents a unique approach for estimating the position and orientation of an indoor IRS using active tags and optimizing the phase shifts with a tag-FMCW radar system for robust radar-based IRS-assisted indoor coverage enhancement. The proposed method offers a practical scheme for localizing the IRS elements and calculating the phase delays effectively, ultimately improving the overall performance of IRS-assisted wireless networks. For implementation, we proposed non-volatile phase-change radio-frequency switches that can operate over a broad range and can provide flexibility in implementation from DC to 67 GHz for 5G-Advanced applications.
- 15 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 33 (6) , 843-846
Resistance Ratio Enhancement in Phase-Change RF Switches at Cryogenic Temperatures
This letter reports the dc and radio frequency (RF) performance of the phase-change RF switches (PCRS) as a function of temperature. Resistance change behavior of the germanium telluride (GeTe) material is experimentally investigated over 77 to 335 K. The device shows metallic behavior in the crystalline state which exhibits consistent low resistivity over a wide temperature range, while in the amorphous state, resistance increases to more than eleven orders of magnitude as a function of decreasing temperature from 300 to 77 K. Device current–voltage (IV) characteristics and the RF performance are investigated for multiple device cycles. The RF performance of the PCRS is reported with and without microheater are examined to confirm the performance variation of the phase-change switches at cryogenic temperatures.
- 15 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 33 (6) , 843-846
Resistance Ratio Enhancement in Phase-Change RF Switches at Cryogenic Temperatures
This letter reports the dc and radio frequency (RF) performance of the phase-change RF switches (PCRS) as a function of temperature. Resistance change behavior of the germanium telluride (GeTe) material is experimentally investigated over 77 to 335 K. The device shows metallic behavior in the crystalline state which exhibits consistent low resistivity over a wide temperature range, while in the amorphous state, resistance increases to more than eleven orders of magnitude as a function of decreasing temperature from 300 to 77 K. Device current–voltage (IV) characteristics and the RF performance are investigated for multiple device cycles. The RF performance of the PCRS is reported with and without microheater are examined to confirm the performance variation of the phase-change switches at cryogenic temperatures.
- Open Access
- 17 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 3 (2) , 827-851
Recent Advancements in Reconfigurable mmWave Devices Based on Phase-Change and Metal Insulator Transition Materials
Chalcogenide Phase Change Materials (PCM) and metal insulator transition (MIT) materials are a group of materials that are capable of switching between low resistance and high resistance states. These emerging materials have been widely used in optical storage media and memory devices. Over the past recent years, there have been interests in exploiting the PCM and MIT materials, especially germanium antimony telluride (GST) alloys and vanadium dioxide (VO 2 ), for radio frequency (RF) applications. The PCM and MIT-based RF devices are expected to bridge the gap between semiconductor switches and microelectromechanical system (MEMS) switches as they combine the low insertion loss performance of MEMS technology and the small size and reliability performance of semiconductor technology. This article presents an overview of the PCM and MIT materials for RF circuits and discusses the recent advancements in reconfigurable millimeter-wave (mmWave) devices based on PCM and MIT materials in depth.
- 17 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 3 (2) , 827-851
Open AccessRecent Advancements in Reconfigurable mmWave Devices Based on Phase-Change and Metal Insulator Transition Materials
Chalcogenide Phase Change Materials (PCM) and metal insulator transition (MIT) materials are a group of materials that are capable of switching between low resistance and high resistance states. These emerging materials have been widely used in optical storage media and memory devices. Over the past recent years, there have been interests in exploiting the PCM and MIT materials, especially germanium antimony telluride (GST) alloys and vanadium dioxide (VO 2 ), for radio frequency (RF) applications. The PCM and MIT-based RF devices are expected to bridge the gap between semiconductor switches and microelectromechanical system (MEMS) switches as they combine the low insertion loss performance of MEMS technology and the small size and reliability performance of semiconductor technology. This article presents an overview of the PCM and MIT materials for RF circuits and discusses the recent advancements in reconfigurable millimeter-wave (mmWave) devices based on PCM and MIT materials in depth.
- 14 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (5) , 1-7
Cryogenic Analog Microwave Variable Attenuator Using rf-SQUIDs for Quantum Systems
We present the design, fabrication and testing of a low-temperature superconducting (LTS) analog microwave variable attenuator. The two-port circuit includes two 90 o hybrid couplers and a phase shifter to realize a variable attenuation at the output port. The wideband analog phase shifter is implemented using LTS microstrip transmission line (TL) coupled to an array of radio frequency superconducting quantum interference devices (rf-SQUIDs). The phase shift is achieved by passing a dc current through a TL adjacent to the SQUID-loaded microstrip line which controls the flux through the rf-SQUIDs. The proposed variable attenuator shows more than 30 dB of precise analog flat attenuation tuning range over 8 GHz to 12 GHz with a dc control current ranging from 0 mA to 4.5 mA. The device exhibits a wideband operation with variable attenuation seen not only in the X- band but also in Ku- band. The device is fabricated using a multilayer niobium-based superconducting process SFQ5ee by MIT Lincoln Laboratory, and has a compact footprint of 1.3 mm 2 . To the best of our knowledge, this is the first implementation of a variable attenuator using distributed rf-SQUIDs. This device has implications in a variety of applications such as cryogenic receivers and qubit circuit measurements.
- 14 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (5) , 1-7
Cryogenic Analog Microwave Variable Attenuator Using rf-SQUIDs for Quantum Systems
We present the design, fabrication and testing of a low-temperature superconducting (LTS) analog microwave variable attenuator. The two-port circuit includes two 90 o hybrid couplers and a phase shifter to realize a variable attenuation at the output port. The wideband analog phase shifter is implemented using LTS microstrip transmission line (TL) coupled to an array of radio frequency superconducting quantum interference devices (rf-SQUIDs). The phase shift is achieved by passing a dc current through a TL adjacent to the SQUID-loaded microstrip line which controls the flux through the rf-SQUIDs. The proposed variable attenuator shows more than 30 dB of precise analog flat attenuation tuning range over 8 GHz to 12 GHz with a dc control current ranging from 0 mA to 4.5 mA. The device exhibits a wideband operation with variable attenuation seen not only in the X- band but also in Ku- band. The device is fabricated using a multilayer niobium-based superconducting process SFQ5ee by MIT Lincoln Laboratory, and has a compact footprint of 1.3 mm 2 . To the best of our knowledge, this is the first implementation of a variable attenuator using distributed rf-SQUIDs. This device has implications in a variety of applications such as cryogenic receivers and qubit circuit measurements.
- 30 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (4) , 1621-1629
Wideband Power-Dependent Power Limiter Based on Distributed Low-Temperature Superconductor rf-SQUIDs for Cryogenic RF Receivers
A novel design of a radio-frequency (RF) power limiter for protecting sensitive superconductor receiver components from high-power microwave signals is presented. In this approach, two low- T $_{c}$ superconductor microstrip lines, one of which is coupled with an array of RF superconducting quantum interference devices (rf-SQUIDs), are combined with a pair of hybrid couplers to provide the power limiting operation at very low RF power levels. The key concept is built on the fact that a microstrip line coupled to an array of rf-SQUIDs behaves as a power-dependent phase shifter and its phase can be controlled by the input RF power. This phenomenon is exploited to achieve the desired RF power-limiting operation. The device is fabricated using an eight-layer niobium-based superconducting process node SFQ5ee by MIT Lincoln Laboratory (MIT-LL). A monolithically integrated wideband hybrid coupler is used in this design as it dictates the bandwidth of the overall device. The operating frequency of the power limiter is 10 GHz with a 2-GHz bandwidth. The performance of the device is measured for input RF power levels ranging from $-$ 30 to $+$ 10 dBm, as well as arising intermodulation products are experimentally investigated. The output power increases linearly with the input power up to $-$ 15 dBm, and for higher power levels, the device offers an increasing attenuation to limit the output RF power starting above $-15$ dBm.
- 30 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (4) , 1621-1629
Wideband Power-Dependent Power Limiter Based on Distributed Low-Temperature Superconductor rf-SQUIDs for Cryogenic RF Receivers
A novel design of a radio-frequency (RF) power limiter for protecting sensitive superconductor receiver components from high-power microwave signals is presented. In this approach, two low- T $_{c}$ superconductor microstrip lines, one of which is coupled with an array of RF superconducting quantum interference devices (rf-SQUIDs), are combined with a pair of hybrid couplers to provide the power limiting operation at very low RF power levels. The key concept is built on the fact that a microstrip line coupled to an array of rf-SQUIDs behaves as a power-dependent phase shifter and its phase can be controlled by the input RF power. This phenomenon is exploited to achieve the desired RF power-limiting operation. The device is fabricated using an eight-layer niobium-based superconducting process node SFQ5ee by MIT Lincoln Laboratory (MIT-LL). A monolithically integrated wideband hybrid coupler is used in this design as it dictates the bandwidth of the overall device. The operating frequency of the power limiter is 10 GHz with a 2-GHz bandwidth. The performance of the device is measured for input RF power levels ranging from $-$ 30 to $+$ 10 dBm, as well as arising intermodulation products are experimentally investigated. The output power increases linearly with the input power up to $-$ 15 dBm, and for higher power levels, the device offers an increasing attenuation to limit the output RF power starting above $-15$ dBm.