Wei Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wei Li has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Liang Zhang
Communications Research Centre Canada, Ottawa, Canada
20 shared publications - Jon Montalban
Department of Communications Engineering, University of the Basque Country (UPV/EHU), Bilbao, Spain
16 shared publications - Sung-Ik Park
Media Research Division, Electronics and Telecommunications Research Institute (ETRI), Yuseong-gu, Daejeon, South Korea
16 shared publications - Yiyan Wu
Department of Electrical and Computer Engineering, Western University, London, ON, Canada
15 shared publications - Namho Hur
Media Research Division, Electronics and Telecommunications Research Institute, Daejeon, South Korea
14 shared publications - Pablo Angueira
Department of Communications Engineering, University of the Basque Country (UPV/EHU), Bilbao, Spain
14 shared publications
Latest Publications
- 28 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Broadcasting
- Vol. 70 (3) , 1018-1031
Layered Division Multiplexing Enabled Broadcast Broadband Convergence in 5G: Theory, Simulations, and Scenarios
The vision of the future 5G -Multicast Broadcast Services (5G-MBS) is to achieve full convergence of broadcast and broadband services by providing these services on the same infrastructure and dynamically switching between them without impacting user experiences. By incorporating Layered Division Multiplexing (LDM) into the new 5G-MBS system and performing proper antenna precoding, the network can transmit a 2-layered signal where the higher-power Core Layer (CL) transmits a Single Frequency Network (SFN) broadcast signal, and the lower-power Enhanced Layer (EL) is used for broadband services. To evaluate the performance of the 2-layered network, a 5G system-level simulator is created and configured according to the 3GPP self-evaluation scenarios to compare against the 3GPP calibration results. The resulting Signal to Interference & Noise Ratio (SINR) Cumulative Distribution Function (CDF) curves fall within the tolerance margin of 1 $\sim$ 2 dB from the 3GPP calibration average. Full simulations of the 2-layered network show for an urban scenario with Inter-Site Distance (ISD) of less than 1 km, the network can provide up to three 4K video broadcast services in the CL while supporting a near full broadband network in the EL. For further ISDs up to 3 km, the network can sustain video broadcast service at 1080p while supporting a partial broadband network. For a rural scenario, at the reference ISD of 1732 m, the CL can support three 4k video broadcast services while the EL performance matches a standalone broadband network. Finally, for further ISD of up to 5 km, the CL can support one 1080p and one 720p video broadcast service, and for ISD up to 10 km, the network can provide one broadcast service at 720p in the CL, all while providing a full broadband network in the EL.
- 28 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Broadcasting
- Vol. 70 (3) , 1018-1031
Layered Division Multiplexing Enabled Broadcast Broadband Convergence in 5G: Theory, Simulations, and Scenarios
The vision of the future 5G -Multicast Broadcast Services (5G-MBS) is to achieve full convergence of broadcast and broadband services by providing these services on the same infrastructure and dynamically switching between them without impacting user experiences. By incorporating Layered Division Multiplexing (LDM) into the new 5G-MBS system and performing proper antenna precoding, the network can transmit a 2-layered signal where the higher-power Core Layer (CL) transmits a Single Frequency Network (SFN) broadcast signal, and the lower-power Enhanced Layer (EL) is used for broadband services. To evaluate the performance of the 2-layered network, a 5G system-level simulator is created and configured according to the 3GPP self-evaluation scenarios to compare against the 3GPP calibration results. The resulting Signal to Interference & Noise Ratio (SINR) Cumulative Distribution Function (CDF) curves fall within the tolerance margin of 1 $\sim$ 2 dB from the 3GPP calibration average. Full simulations of the 2-layered network show for an urban scenario with Inter-Site Distance (ISD) of less than 1 km, the network can provide up to three 4K video broadcast services in the CL while supporting a near full broadband network in the EL. For further ISDs up to 3 km, the network can sustain video broadcast service at 1080p while supporting a partial broadband network. For a rural scenario, at the reference ISD of 1732 m, the CL can support three 4k video broadcast services while the EL performance matches a standalone broadband network. Finally, for further ISD of up to 5 km, the CL can support one 1080p and one 720p video broadcast service, and for ISD up to 10 km, the network can provide one broadcast service at 720p in the CL, all while providing a full broadband network in the EL.
- 30 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Broadcasting
- Vol. 70 (2) , 391-400
High Accuracy Channel Estimation With TxID Sequence in ATSC 3.0 SFN
Inter-tower communications networks (ITCN) and wireless in-band distribution links (IDL) reuse the same broadcast spectrum for establishing communications links between transmitter towers and for wireless backhaul by multiplexing the ITCN/IDL signals with the broadcast signal into a frame for transmission. In single-frequency networks (SFN) environment, where all the transmitter towers broadcast the same preamble and in-band pilots for improving TV coverage and received signal strength, receiving the desired ITCN/IDL signal from a specific transmitter is challenging with the conventional channel estimation techniques. In the Advanced Television Standard Committee (ATSC) 3.0, one unique transmitter identification (TxID) sequence, a spread sequence overlaid with the preamble signal, is assigned for each transmitter for the purpose of SFN planning and synchronization. By using the TxID sequence, the channel estimation of a specific transmitter becomes feasible. However, the accuracy of existing TxID-based channel estimation is limited due to interferences from the preamble signal and the co-channel TxIDs, as well as the non-orthogonality of the TxID sequence. Several high-accuracy channel estimation schemes based on the TxID sequence are proposed in this paper, which enable IDL and ITCN with very high data rate transmission, e.g., 1024 QAM modulation.
- 30 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Broadcasting
- Vol. 70 (2) , 391-400
High Accuracy Channel Estimation With TxID Sequence in ATSC 3.0 SFN
Inter-tower communications networks (ITCN) and wireless in-band distribution links (IDL) reuse the same broadcast spectrum for establishing communications links between transmitter towers and for wireless backhaul by multiplexing the ITCN/IDL signals with the broadcast signal into a frame for transmission. In single-frequency networks (SFN) environment, where all the transmitter towers broadcast the same preamble and in-band pilots for improving TV coverage and received signal strength, receiving the desired ITCN/IDL signal from a specific transmitter is challenging with the conventional channel estimation techniques. In the Advanced Television Standard Committee (ATSC) 3.0, one unique transmitter identification (TxID) sequence, a spread sequence overlaid with the preamble signal, is assigned for each transmitter for the purpose of SFN planning and synchronization. By using the TxID sequence, the channel estimation of a specific transmitter becomes feasible. However, the accuracy of existing TxID-based channel estimation is limited due to interferences from the preamble signal and the co-channel TxIDs, as well as the non-orthogonality of the TxID sequence. Several high-accuracy channel estimation schemes based on the TxID sequence are proposed in this paper, which enable IDL and ITCN with very high data rate transmission, e.g., 1024 QAM modulation.
- Open Access
Exploiting Structured Sparsity with Low Complexity Sparse Bayesian Learning for RIS-assisted MIMO Channel Estimation
As an emerging communication auxiliary technology, reconfigurable intelligent surface (RIS) is expected to play a significant role in the upcoming 6G networks. Due to its total reflection characteristics, it is challenging to implement conventional channel estimation algorithms. This work focuses on RIS-assisted MIMO communications. Although many algorithms have been proposed to address this issue, there are still ample opportunities for improvement in terms of estimation accuracy, complexity, and applicability. To fully exploit the structured sparsity of the multiple-input-multiple-output (MIMO) channels, we propose a new channel estimation algorithm called unitary approximate message passing sparse Bayesian learning with partial common support identification (UAMPSBL-PCI). Thanks to the mechanism of PCI and the use of UAMP, the proposed algorithm has a lower complexity while delivering enhanced performance relative to existing channel estimation algorithms. Extensive simulations demonstrate its excellent performance in various environments.
Open AccessExploiting Structured Sparsity with Low Complexity Sparse Bayesian Learning for RIS-assisted MIMO Channel Estimation
As an emerging communication auxiliary technology, reconfigurable intelligent surface (RIS) is expected to play a significant role in the upcoming 6G networks. Due to its total reflection characteristics, it is challenging to implement conventional channel estimation algorithms. This work focuses on RIS-assisted MIMO communications. Although many algorithms have been proposed to address this issue, there are still ample opportunities for improvement in terms of estimation accuracy, complexity, and applicability. To fully exploit the structured sparsity of the multiple-input-multiple-output (MIMO) channels, we propose a new channel estimation algorithm called unitary approximate message passing sparse Bayesian learning with partial common support identification (UAMPSBL-PCI). Thanks to the mechanism of PCI and the use of UAMP, the proposed algorithm has a lower complexity while delivering enhanced performance relative to existing channel estimation algorithms. Extensive simulations demonstrate its excellent performance in various environments.
- 1 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Broadcasting
- Vol. 70 (1) , 2-13
Iterative Successive Nonlinear Self-Interference Cancellation for In-Band Full-Duplex Communications
In-band full-duplex (IBFD) communications have recently been considered for wireless backhaul in the ultra-high frequency (UHF) band terrestrial broadcast systems since they can double the spectral efficiency compared to conventional half-duplex communications. The inherent challenge of IBFD communication is self-interference (SI), the power leakage from the co-located transmitter to the receiver. For wireless backhaul among transmitter towers, it’s desirable to employ high-order modulation, e.g., 1024QAM or 4096QAM, for higher spectral efficiency. Furthermore, the transmitter emission power is much higher in low radio frequency (RF) bands. Due to the nonlinearity of the transmitter high-power amplifier (HPA), the nonlinear distorted SI becomes a performance-limiting impairment and must be effectively mitigated. Moreover, the SI channel exhibits a large multipath delay spread in these applications, especially in UHF-band terrestrial broadcasting systems where the transmission frequency is lower and the antenna directivity is limited. In this paper, a novel iterative successive nonlinear SI cancellation scheme, based on the previously proposed frequency-domain RF self-interference cancellation (RF-SIC) technique, is presented. The baseline RF-SIC is capable of cancelling SI with a large multipath delay spread. However, the RF-SIC performance is limited by the presence of the remote signal of interest (SOI) in the received signal. This SOI presence, referred to as “intrinsic noise” in the SI channel estimation process, occurs due to foregoing the training phase requirement. The proposed approach in this paper iteratively cancels the “intrinsic noise” and can suppress the nonlinear SI to the receiver noise floor. The proposed technique can be applied to 3rd Generation Partnership Project (3GPP) Integrated Access and Backhaul (IAB) technology to make it more feasible for deployment at the lower frequency band.
- 1 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Broadcasting
- Vol. 70 (1) , 2-13
Iterative Successive Nonlinear Self-Interference Cancellation for In-Band Full-Duplex Communications
In-band full-duplex (IBFD) communications have recently been considered for wireless backhaul in the ultra-high frequency (UHF) band terrestrial broadcast systems since they can double the spectral efficiency compared to conventional half-duplex communications. The inherent challenge of IBFD communication is self-interference (SI), the power leakage from the co-located transmitter to the receiver. For wireless backhaul among transmitter towers, it’s desirable to employ high-order modulation, e.g., 1024QAM or 4096QAM, for higher spectral efficiency. Furthermore, the transmitter emission power is much higher in low radio frequency (RF) bands. Due to the nonlinearity of the transmitter high-power amplifier (HPA), the nonlinear distorted SI becomes a performance-limiting impairment and must be effectively mitigated. Moreover, the SI channel exhibits a large multipath delay spread in these applications, especially in UHF-band terrestrial broadcasting systems where the transmission frequency is lower and the antenna directivity is limited. In this paper, a novel iterative successive nonlinear SI cancellation scheme, based on the previously proposed frequency-domain RF self-interference cancellation (RF-SIC) technique, is presented. The baseline RF-SIC is capable of cancelling SI with a large multipath delay spread. However, the RF-SIC performance is limited by the presence of the remote signal of interest (SOI) in the received signal. This SOI presence, referred to as “intrinsic noise” in the SI channel estimation process, occurs due to foregoing the training phase requirement. The proposed approach in this paper iteratively cancels the “intrinsic noise” and can suppress the nonlinear SI to the receiver noise floor. The proposed technique can be applied to 3rd Generation Partnership Project (3GPP) Integrated Access and Backhaul (IAB) technology to make it more feasible for deployment at the lower frequency band.
- 22 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Broadcasting
- Vol. 69 (2) , 569-578
Signal Isolation Characterization of ITCN In-Band Full-Duplex Communications
Future digital terrestrial television (DTT) systems are introducing revolutionary changes to their architectures and operation modes. One of the best examples is ATSC 3.0, which is pushing to incorporate the Internet Protocol (IP) into the protocol stack. This way, implementing new applications (e.g., target advertisement, connected cars, 4k/8k video content) is closer than ever. Indeed, recent works have suggested designing and implementing an Inter-Tower Communications Network (ITCN) and wireless In-band Distribution Link (IDL) inside the ATSC 3.0 forums. ITCN will interconnect all broadcast towers to form a communication network for control, monitoring, data communication, and localized datacast and broadcast services. Nevertheless, this application has a significant challenge: the self-interference (SI) or loopback signal that is generated and added to the received signal. To reduce the impact of the SI, the transmission centers combine different signal isolation and cancellation techniques. This paper focuses on characterizing the signal power isolation between the transmitted and the received signals under different conditions. In particular, this paper shows the signal isolation values measured during various field trials in real broadcast transmission centers. The results show that the total signal isolation varies depending on the transmission/reception configuration between 70-90 dB. Moreover, due to the measurements, we have demonstrated that the antenna distance is a more relevant parameter for signal isolation than the center frequency. Finally, the possible antenna pattern discrimination has been calculated and discussed.
- 22 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Broadcasting
- Vol. 69 (2) , 569-578
Signal Isolation Characterization of ITCN In-Band Full-Duplex Communications
Future digital terrestrial television (DTT) systems are introducing revolutionary changes to their architectures and operation modes. One of the best examples is ATSC 3.0, which is pushing to incorporate the Internet Protocol (IP) into the protocol stack. This way, implementing new applications (e.g., target advertisement, connected cars, 4k/8k video content) is closer than ever. Indeed, recent works have suggested designing and implementing an Inter-Tower Communications Network (ITCN) and wireless In-band Distribution Link (IDL) inside the ATSC 3.0 forums. ITCN will interconnect all broadcast towers to form a communication network for control, monitoring, data communication, and localized datacast and broadcast services. Nevertheless, this application has a significant challenge: the self-interference (SI) or loopback signal that is generated and added to the received signal. To reduce the impact of the SI, the transmission centers combine different signal isolation and cancellation techniques. This paper focuses on characterizing the signal power isolation between the transmitted and the received signals under different conditions. In particular, this paper shows the signal isolation values measured during various field trials in real broadcast transmission centers. The results show that the total signal isolation varies depending on the transmission/reception configuration between 70-90 dB. Moreover, due to the measurements, we have demonstrated that the antenna distance is a more relevant parameter for signal isolation than the center frequency. Finally, the possible antenna pattern discrimination has been calculated and discussed.
- 1 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Broadcasting
- Vol. 69 (2) , 560-568
In-Band Full-Duplex Communications in ATSC 3.0 Single Frequency Network
Wireless in-band backhaul, a.k.a. in-band distribution links (IDL), is a spectrum-efficient and cost-effective enabling technology to the realization of Advanced Television Systems Committee (ATSC) 3.0 in the single frequency network (SFN) mode, where all the transmitter towers are synchronized to transmit the same broadcast signal in the same frequency band. Inter-tower communications network (ITCN) transforms the broadcast towers into a mesh network, thereby introducing datacasting capability to the traditional broadcast network. Both the ITCN and IDL can be operated in the most spectrum-efficient in-band full-duplex (IBFD) mode. In these situations, the ITCN/IDL receivers at the SFN towers receive the signal of interest (SOI) not only severely corrupted by the self-interference signal from its co-located transmitter, but also the co-channel interference signals from neighbouring transmitters. Moreover, the ITCN/IDL signals may be combined with the broadcast signal in the Layer Division Multiplexing (LDM) format to achieve better overall spectral efficiency. Therefore, the LDM inter-layer interference must also be mitigated. In this paper, the interferences for the ITCN/IDL signal in the SFN environment are analyzed, and a novel iterative successive signal cancellation scheme is proposed to effectively mitigate the interferences in the ITCN/IDL signal detection process in ATSC 3.0 SFNs.
- 1 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Broadcasting
- Vol. 69 (2) , 560-568
In-Band Full-Duplex Communications in ATSC 3.0 Single Frequency Network
Wireless in-band backhaul, a.k.a. in-band distribution links (IDL), is a spectrum-efficient and cost-effective enabling technology to the realization of Advanced Television Systems Committee (ATSC) 3.0 in the single frequency network (SFN) mode, where all the transmitter towers are synchronized to transmit the same broadcast signal in the same frequency band. Inter-tower communications network (ITCN) transforms the broadcast towers into a mesh network, thereby introducing datacasting capability to the traditional broadcast network. Both the ITCN and IDL can be operated in the most spectrum-efficient in-band full-duplex (IBFD) mode. In these situations, the ITCN/IDL receivers at the SFN towers receive the signal of interest (SOI) not only severely corrupted by the self-interference signal from its co-located transmitter, but also the co-channel interference signals from neighbouring transmitters. Moreover, the ITCN/IDL signals may be combined with the broadcast signal in the Layer Division Multiplexing (LDM) format to achieve better overall spectral efficiency. Therefore, the LDM inter-layer interference must also be mitigated. In this paper, the interferences for the ITCN/IDL signal in the SFN environment are analyzed, and a novel iterative successive signal cancellation scheme is proposed to effectively mitigate the interferences in the ITCN/IDL signal detection process in ATSC 3.0 SFNs.
- 28 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Broadcasting
- Vol. 69 (2) , 610-616
Inter-Tower Communications Network Signal Structure, and Interference Analysis for Terrestrial Broadcasting and Datacasting
This paper presents the Inter-Tower Communications Network (ITCN) signal structure using different combinations of multiplexing schemes, namely time-division multiplexing (TDM)/frequency-division multiplexing (FDM) and layer-division multiplexing (LDM). Data capacity is analyzed for mobile and fixed broadcasting services, as well as datacasting, inter-tower communication data, and SFN In-band Distribution Links (IDL). Multiple-input multiple-output (MIMO) is investigated for ITCN and IDL to increase the data throughput and to improve spectrum efficiency. The proposed technology can be Digital television (DTV) standard agnostic. It can be implemented on all existing DTV standards while keeping backward compatibility with legacy broadcast services and legacy TV receivers. A hybrid broadcast SFN overlay with ITCN/IDL data network using LDM might be the best solution considering backward compatibility, data capacity, and co-channel interference.
- 28 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Broadcasting
- Vol. 69 (2) , 610-616
Inter-Tower Communications Network Signal Structure, and Interference Analysis for Terrestrial Broadcasting and Datacasting
This paper presents the Inter-Tower Communications Network (ITCN) signal structure using different combinations of multiplexing schemes, namely time-division multiplexing (TDM)/frequency-division multiplexing (FDM) and layer-division multiplexing (LDM). Data capacity is analyzed for mobile and fixed broadcasting services, as well as datacasting, inter-tower communication data, and SFN In-band Distribution Links (IDL). Multiple-input multiple-output (MIMO) is investigated for ITCN and IDL to increase the data throughput and to improve spectrum efficiency. The proposed technology can be Digital television (DTV) standard agnostic. It can be implemented on all existing DTV standards while keeping backward compatibility with legacy broadcast services and legacy TV receivers. A hybrid broadcast SFN overlay with ITCN/IDL data network using LDM might be the best solution considering backward compatibility, data capacity, and co-channel interference.
- 16 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Broadcasting
- Vol. 69 (2) , 579-588
Implementation of Wireless Backhaul and Inter-Tower Communications With MIMO in ATSC 3.0
Wireless backhaul, i.e., in-band distribution links (IDL) and inter-tower communications networks (ITCN) were previously proposed as key enabling technologies for the next-generation digital broadcasting systems, e.g., the Advanced Television Systems Committee (ATSC) 3.0 system. Both ITCN/IDL can be operated in the spectrum-efficient in-band full-duplex (IBFD) mode and the same frequency band is shared between the broadcast service signal and the ITCN/IDL signals. It is desirable to integrate multi-input multi-output (MIMO) into ITCN/IDL transmission to increase the throughput and reduce the portion of spectrum occupation by ITCN/IDL. However, due to the backward compatibility constraint, conventional symmetrical MIMO techniques cannot be applied directly to the existing broadcast infrastructure without affecting legacy receivers. In this paper, the practical implementation of a non-symmetrical MIMO for ITCN/IDL while maintaining backward compatibility is considered. In addition to the existing broadcasting antenna, the non-symmetrical MIMO comprises an additional low-power RF feeder cable and one or more highly directional antennas to achieve low-cost MIMO implementation for high throughput data distribution and inter-tower communications. When the broadcast service signal and the MIMO signal are multiplexed in Time Division Multiplexing (TDM) format, the signal structure is ATSC 3.0 standard compliant. When the broadcast service signal and the MIMO signal are multiplexed in Layer Division Multiplexing (LDM) format, modification of the ATSC 3.0 standard, i.e., introducing a new pilot encoding scheme, is required. Moreover, MIMO self-interference cancellation (SIC) is investigated for IBFD operation.
- 16 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Broadcasting
- Vol. 69 (2) , 579-588
Implementation of Wireless Backhaul and Inter-Tower Communications With MIMO in ATSC 3.0
Wireless backhaul, i.e., in-band distribution links (IDL) and inter-tower communications networks (ITCN) were previously proposed as key enabling technologies for the next-generation digital broadcasting systems, e.g., the Advanced Television Systems Committee (ATSC) 3.0 system. Both ITCN/IDL can be operated in the spectrum-efficient in-band full-duplex (IBFD) mode and the same frequency band is shared between the broadcast service signal and the ITCN/IDL signals. It is desirable to integrate multi-input multi-output (MIMO) into ITCN/IDL transmission to increase the throughput and reduce the portion of spectrum occupation by ITCN/IDL. However, due to the backward compatibility constraint, conventional symmetrical MIMO techniques cannot be applied directly to the existing broadcast infrastructure without affecting legacy receivers. In this paper, the practical implementation of a non-symmetrical MIMO for ITCN/IDL while maintaining backward compatibility is considered. In addition to the existing broadcasting antenna, the non-symmetrical MIMO comprises an additional low-power RF feeder cable and one or more highly directional antennas to achieve low-cost MIMO implementation for high throughput data distribution and inter-tower communications. When the broadcast service signal and the MIMO signal are multiplexed in Time Division Multiplexing (TDM) format, the signal structure is ATSC 3.0 standard compliant. When the broadcast service signal and the MIMO signal are multiplexed in Layer Division Multiplexing (LDM) format, modification of the ATSC 3.0 standard, i.e., introducing a new pilot encoding scheme, is required. Moreover, MIMO self-interference cancellation (SIC) is investigated for IBFD operation.
- 10 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 22 (4) , 2352-2363
Frequency-Domain RF Self-Interference Cancellation for In-Band Full-Duplex Communications
Wireless backhaul has recently gained a significant amount of interest as a cost-effective solution in comparison with conventional backhaul technologies with dedicated microwave links or fiber optics. Self-interference cancellation (SIC) is an enabling technology that allows wireless backhaul to operate in the more spectrum-efficient in-band full-duplex (IBFD) operation mode instead of the out-of-band mode. Compared to Wi-Fi IBFD transceivers, wireless in-band backhaul systems face some unique challenges, such as significantly higher transmission power and much larger propagation delay spread for the self-interference signal, especially in the low-frequency bands under 1 GHz, which often prevent accurate SIC performance. The SIC is often implemented with an interference-cancelling filter, where the filter weights are essentially the channel estimates of the self-interference signals. In this paper, a frequency-domain Radio Frequency (RF) SIC (RF-SIC) framework with a novel filter weight optimization algorithm is proposed to tackle the challenges of wireless in-band backhaul. The proposed RF-SIC does not require a dedicated training phase which needs to stop the transmission of the backhaul signal. Moreover, it has the capability of tracking the self-interference channel variation since the filter weights are updated in a block-by-block fashion.
- 10 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 22 (4) , 2352-2363
Frequency-Domain RF Self-Interference Cancellation for In-Band Full-Duplex Communications
Wireless backhaul has recently gained a significant amount of interest as a cost-effective solution in comparison with conventional backhaul technologies with dedicated microwave links or fiber optics. Self-interference cancellation (SIC) is an enabling technology that allows wireless backhaul to operate in the more spectrum-efficient in-band full-duplex (IBFD) operation mode instead of the out-of-band mode. Compared to Wi-Fi IBFD transceivers, wireless in-band backhaul systems face some unique challenges, such as significantly higher transmission power and much larger propagation delay spread for the self-interference signal, especially in the low-frequency bands under 1 GHz, which often prevent accurate SIC performance. The SIC is often implemented with an interference-cancelling filter, where the filter weights are essentially the channel estimates of the self-interference signals. In this paper, a frequency-domain Radio Frequency (RF) SIC (RF-SIC) framework with a novel filter weight optimization algorithm is proposed to tackle the challenges of wireless in-band backhaul. The proposed RF-SIC does not require a dedicated training phase which needs to stop the transmission of the backhaul signal. Moreover, it has the capability of tracking the self-interference channel variation since the filter weights are updated in a block-by-block fashion.
- 27 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 924-926
Remote Monitoring System of Heat Exchange Station based on 5G-Internet Network
In this article, a wireless remote monitor and control system for central heating stations based on 5G-internet is designed according to the characteristics of central heating stations in north China, such as scattered, low intelligent management and waste of human resources, the system uses 5G-internet technology to realize the data transmission between heat exchange station and remote monitoring center. Every heat exchange station uses Siemens PLC to carry out real-time monitoring of heat network parameters, automatic regulation of heating temperature, pipe network pressure and other parameters requirements. The system is simple and convenient to operate, and achieves the purposes of heat exchange station unattended, heating on demand, saving resources and reducing energy consumption.
- 27 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 924-926
Remote Monitoring System of Heat Exchange Station based on 5G-Internet Network
In this article, a wireless remote monitor and control system for central heating stations based on 5G-internet is designed according to the characteristics of central heating stations in north China, such as scattered, low intelligent management and waste of human resources, the system uses 5G-internet technology to realize the data transmission between heat exchange station and remote monitoring center. Every heat exchange station uses Siemens PLC to carry out real-time monitoring of heat network parameters, automatic regulation of heating temperature, pipe network pressure and other parameters requirements. The system is simple and convenient to operate, and achieves the purposes of heat exchange station unattended, heating on demand, saving resources and reducing energy consumption.