ILIgor Lutsenko

Igor Lutsenko

*This is an algorithmically generated author record based on publicly available information.

Igor Lutsenko has a total of 44 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development of method for evaluating the efficiency of automated water supply pumping station operational modes based on the ELF criterion

    by Igor Lutsenko

    This study investigates an automated water supply pumping station operating within a centralized water supply system. The station's operation is determined by selecting one of several possible control modes. The task addressed is to assess the efficiency and selection of a rational control mode for an automated water supply pumping station. A method for assessing the efficiency and for selecting a rational operating mode for an automated water supply pumping station has been devised, based on the Efficiency Level of Functioning (ELF) integrated performance criterion. The study's result is the constructed mathematical model for an automated water supply pumping station. Based on the proposed model, an algorithm for assessing the efficiency and for selecting a rational operating mode for an automated pumping station based on the ELF criterion has been developed and theoretically substantiated. A computational experiment was conducted using an automated water supply pumping station as an example, confirming its practical application in selecting a rational operating mode. A comparative analysis of the ELF-based method with existing methods for assessing the efficiency of modes, including individual KPIs, the Dinkelbach method, and Pareto analysis, was performed; the advantages of using the ELF integrated criterion were determined. It was found that the proposed method enables the formation of a unified, integrated performance assessment and the automatic selection of a rational mode, whereas traditional methods only evaluate individual indicators and do not ensure the selection of the most efficient mode. The study's findings could be used in other technological processes

  • Open Access

    Development of an approach to the normalized functional for deviation in efficiency indicator

    by Igor Lutsenko, Iryna Oksanych, Maksim Drachko, Evgeniia Burdilna

    This study examines controlled technological process of heating liquid, which is considered as a cybernetic system for transforming resources into a usable technological product. The work investigates the possibility of constructing a normalized functional of deviation in the efficiency indicator in dynamic models of technological processes, used to synthesize optimal control effects. They provide a quantitative assessment of deviation of the actual efficiency from the required level and allow the application of optimal control methods. The task addressed is to find a standardized indicator of efficiency deviation E, which would ensure the dimensionlessness of this indicator and its large-scale independence. It is a dimensionless quadratic measure of difference between the total useful result and the total costs. It has been shown that the parameter E has the properties of computational constancy and could be used for analysis, normalization, and comparison of various control modes. The ELF (Normalized Efficiency Criterion) computing block has been designed, which makes it possible to convert input parameters into cost form, accumulate total costs and useful effect, form indicators of additional benefit and resource intensity, as well as calculate a normalized efficiency criterion. It is shown that ELF is an integrated indicator of efficiency as a ratio of additional benefit to the resource intensity of the permissible mode; the indicator E represents its normalized metric form. The results make it possible to assess the effectiveness of the process in a quantitative way. And the functional E shows a deviation from the required mode, which gives the opportunity to conduct an analysis and make the right decisions in the management of a technological process. The research findings could be used in any technological processes

  • Open Access

    Development of a universal integral criterion for cybernetic control

    by Igor Lutsenko

    This study investigates the technological process of heating a liquid considered as a controlled cybernetic system for converting resources into a usable technological result. The work aims to solve a pressing task of choosing a single universal criterion for assessing the effectiveness of technological processes. The subject of research is the ELF (Normalized Efficiency Criterion) computing module, designed for an integral assessment of the effectiveness of cybernetic control over technological processes in discrete time. This work reports designing a computing module that converts technological input parameters and corresponding price coefficients into a system of cost indicators of costs and useful effect. The proposed system allows for the reduction of heterogeneous resources and the result of the process to a single scale, which makes it possible to formalize their joint analysis and a coordinated comparison of alternative modes. Elementary cost functions and aggregated indicators of the control cycle are introduced, on the basis of which the first-level integral accumulators are formed – accumulated costs and accumulated effect. To assess the efficiency of control over a given time interval, secondary integrators of the second level and the mode selection index are used, which reflects the excess of the integral effect over the integral costs in the inertial-accumulator sense. Within the framework of the approach, the additional benefit and resource intensity of the permissible control mode are determined, which are formed using a storage device with a reset mechanism in the case of violation of the regime conditions. The permissibility of the mode is set by the threshold rule and the procedure for resetting the final indicators in the case of its inadmissibility, which provides a diagnostically interpreted separation of the causes of zero efficiency. The proposed structure of the computing module focuses on the analysis, diagnostics, and optimization of control modes and allows for software implementation as part of cybernetic control systems

  • The Calculating Method of Operation Mode Efficiency for Continuous Dynamic System from a Cybernetic View Point

    by Igor Lutsenko, Svetlana Koval, Elena Vikhrova, Iryna Oksanych, Bogdan Gladyshkin

    The research concerns the field of optimization for technological transformation processes with a continuous supply of raw materials. The article offers an approach to the organization of the dynamic systems work with monitoring and management is carried out on the basis of specified parameters from a cybernetic view point. In order for the system to reach the optimum and maintain it with dynamically changing input parameters, a systematic calculation of the system efficiency in the current mode with subsequent correction of the control trajectory is required. For these purposes, an improved method of efficiency calculating of the continuous dynamic system operating mode was proposed, which differs from the existing one by using the parameters of the global model of the continuous process. Verification of the proposed method was carried out by testing the system interface model.

  • Open Access

    Creating a concept and axiomatization of the applied theory of efficiency of complex technical systems with distributed parameters of input and output products

    by Igor Lutsenko, Valerii Tytiuk, Elena Vikhrova, Iryna Oksanych, Galina Sivyakova

    The object of this study is the processes of optimal control over complex technical systems with input and output products distributed in time. The automatic formation of optimal control trajectories of technical systems that ensure maximum efficiency of production processes is limited by the insufficient development of the applied theory of the efficiency of complex systems. This work considers the development of the conceptual base and axiomatization of the applied theory of the efficiency of technical systems. A system of definitions and a system of axioms describing the indicators of the functioning of the cybernetic model of a technical system have been developed. The resulting system of axioms formalizes the technique and methods for determining various indicators, as well as obtaining the current value of the performance indicator of the technical system. The obtained expressions make it possible to form a subsystem for assessing the effectiveness of a technical system, invariant with respect to its internal structure and the characteristics of the transformation processes implemented by it. The universality of the proposed indicators and the structural unity of the performance evaluation subsystem make it possible to express an opinion on the cybernetic level of these decisions. An example of the practical application of the proposed system of axioms of the applied theory of efficiency is given. The proposed method for determining the efficiency indicator can be applied to arbitrary technical systems with a distributed nature of the change in input and output products. The cybernetic level of abstractions used to determine the effectiveness of complex systems makes it possible to proceed to solving the problem of formalization and full automation of the processes of optimal control over complex technical systems with distributed input and output products

  • Open Access

    Optimization of resource-intensive dynamic systems with a continuous supply of raw materials according to the criterion of minimum use of reserves

    by Igor Lutsenko, Svetlana Koval, Iryna Oksanych, Igor Shevchenko

    Optimization of production processes has always been one of the cornerstones for industrial enterprises seeking to improve productivity while minimizing the costs involved. A particularly difficult situation is when it is necessary to manage the process of the entire production chain with a continuous supply of raw materials. It is necessary to keep under control the actual production data, current production requirements, and adhere to the international strategy of energy saving. This paper reports a devised optimal dynamic system with a continuous supply of raw materials, which automatically changes the control trajectory in order to reduce the amount of resources used. The theoretical scientific component is represented in the form of an interface model of the system, and the research results are represented in the form of time diagrams that show the verification of the proposed model. The model provides for the interconnection of the chain of such developed dynamical systems, in which the continuity of the process is ensured by buffering systems, and the optimality of operation is enabled by adaptation mechanisms. The time diagrams can demonstrate the interaction of systems and mechanisms that generate information signals through the port sections. At each subsequent control action, the process parameter changes were made within a set range. As a result of a targeted search for permissible controls, the system, driven by the adaptation mechanism, enabled a gradual reduction in the consumption of the energy product and stabilized the intensity of the target product being processed, which made it possible to subsequently avoid shutdowns and restarts of the production line and reduce overall production costs.

  • Open Access

    Cybernetic estimation of reserve utilization efficiency

    by Igor Lutsenko

    This study relates to the field of verification of cybernetic estimates of the use of reserves as criteria for the effectiveness of transformative class systems with a continuous supply of a technological product. The task set here attracted even more attention after the advent of improved approaches that make it possible to automatically change the control trajectories of technological systems in real time. In such cases, the assessment of the current status of the process and the efficiency of stock management has become an integral part of the operation of the management subsystems. Therefore, the development and verification of cybernetic assessment of effectiveness for such control systems is a relevant issue. The first stage of the reported research involved the development of a cybernetic model of operation with distributed parameters. Four formal features have been proposed. Finding integral functions of these features has made it possible to obtain an idea of some quantitative characteristics of the process while finding the second time-dependent integral characteristic has made it possible to represent the physical and cybernetic parameters of the process. At the second stage, formulas for calculating the main assessment indicators were proposed; their verification was carried out under three different control trajectories, which showed the adequacy of the devised approach. The final step was to develop three variations of the efficiency formula, which is calculated at set points in time throughout the entire production cycle. Thus, cybernetic assessment of the effectiveness of the use of reserves makes it possible to formalize and fully automate the processes of optimization and adaptation of the functional systems of an enterprise


  • Open Access

    Developing interactive interaction of dual buffering systems and conversion class systems with continuous supply of technological products

    by Igor Lutsenko, Svitlana Koval, Valerii Tytiuk

    Many modern industrial production facilities consist of sequentially operating systems with a continuous supply of technological product. The task of stabilizing the qualitative and quantitative parameters of output products at all stages of such production is a very difficult task and often leads to additional time and money costs. Therefore, improving the efficiency of these processes is a relevant issue. A review of analogous solutions to this type of problem revealed the variability of their authors’ approaches. However, all of them are aimed at optimizing existing control trajectories, rather than creating a new, more accurate trajectory. Earlier, as part of the description of the basic principles of structural and parametric optimization of the management of production processes of this type, only the improved work of technological subsystems was reported. This paper describes the principles of control over the proposed dual buffering system and its interactive interaction with other technological subsystems. The introduction of buffering systems makes sequential technological subsystems more independent of each other. That makes it possible to increase the degree of freedom for each control subsystem and thereby improve the efficiency of finding the optimal mode of operation of the entire cybernetic system. A conceptual model of the dual buffering system was built, the stabilization of the quantitative parameter at the output of the buffering system was substantiated through the development of an adaptation mechanism, and simulation modeling of the synthesized system was carried out. The study shows that the use of buffering systems could improve the quality of energy utilization and reduce the wear of technological mechanisms by 14 % in general

  • Open Access

    Improving control efficiency in buffering systems using anticipatory indicators for demand forecasting

    by Igor Lutsenko, Liudmyla Mikhailova, Hanna Kolomits, Artem Kuzmenko

    Improving control efficiency in buffering systems using anticipatory indicators for demand forecasting

  • Open Access

    DEVELOPMENT OF A METHOD FOR DETERMINING THE OPTIMAL CONTROL TRAJECTORY FOR THE PERIODIC PROCESSES

    by Igor Lutsenko, Аnatolii Oksanych, Olena Fomovskaya, Iryna Oksanych, Denis Mospan, Olga Serdiuk

    The development of new converting technologies and increasing the level of automation leads to an increase in the processing speed of available resources. This means that in case of inefficient or inefficient use of resources, the potential of economic advantage is lost, and the negative consequences of such losses can be identified too late. In such conditions, the requirements for the selection of the criterion of optimization and the validity of the principles of optimal control increase. Moreover, the approach used may vary depending on the daily change in prices for energy products and fluctuations in the level of demand for manufactured products. Despite the fact that such an approach seems obvious, today energy-intensive production suffers significant losses associated with the use of an inadequate model of technological operation, a subjective approach to the choice of optimization criterion and optimization method. The task of developing a method for determining the optimal trajectory of managing energy-intensive industries with a changing level of demand for final products is posed. The solution to this problem consists of several stages. At the first stage, a model of a technological operation is being created, within the framework of which all significant factors affecting the decision result are taken into account. At the second stage, a global operation model is created, the input and output products of which are converted to comparable value values. At the third stage, the optimization criterion for the continuous operation of the system and the mode of incomplete use of its production capabilities is selected. At the final stage, the control path for intermittent and continuous modes of operation is determined. Thus, the aim of research is development of a method for determining the optimal control trajectory in systems of energy-intensive systems, depending on the level of demand for the final product.