Nancy Rocío Sanabria González
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nancy Rocío Sanabria González has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Iván F. Macías-Quiroga
Departamento de Física y Química, Universidad Nacional de Colombia Sede Manizales, Campus La Nubia, km 9 vía al Aeropuerto, Manizales 170003, Colombia
10 shared publications - Gloria Inés Giraldo Gómez
Universidad Nacional de Colombia, Manizales, Colombia
6 shared publications Iván F. Macías-Quiroga
Departamento de Física y Química, Universidad Nacional de Colombia Sede Manizales, Campus La Nubia, km 7 vía al Aeropuerto, Manizales, Colombia
4 shared publicationsGloria Inés Giraldo-Gómez
Department of Physics and Chemical, Faculty of Exact and Natural Sciences, Universidad Nacional de Colombia sede Manizales, Campus La Nubia, km 7 Vía al Aeropuerto, AA 127 Manizales, Colombia
3 shared publicationsIván Fernando Macías-Quiroga
Department of Chemical Engineering, Faculty of Engineering and Architecture, Universidad Nacional de Colombia sede Manizales, Campus La Nubia, km 7 Vía al Aeropuerto, AA 127 Manizales, Colombia
3 shared publications- Javier Ignacio Carrero Mantilla
Departamento de Ingeniería Química (Chemical Engineering Department), Universidad Nacional de Colombia, sede Manizales (Colombia’s National University at Manizales), Manizales, Colombia
3 shared publications
Latest Publications
- Open Access
Alginate/Graphite Oxide Hydrogel Beads as a Sustainable Solution for Diclofenac Elimination in Aqueous Systems
Diclofenac (DCF) is a widespread pharmaceutical pollutant in aquatic environments requiring efficient treatment strategies. This study evaluated alginate/graphite oxide (Alg/GrO) hydrogel beads as a sustainable solution for removing DCF from aqueous systems. Graphite oxide, synthesized via a modified Hummers method, was incorporated into an alginate matrix. One-Factor-at-a-Time (OFAT) experiments were conducted to screen operational parameters, establishing that DCF adsorption was favored at pH 6.0, 200 rpm stirring speed, and 180 min contact time. Holding these parameters constant, the effects of the initial DCF concentration and Alg/GrO dosage were modeled and optimized using a Central Composite Design (CCD) combined with Response Surface Methodology (RSM). Under optimal conditions (34.2 mg L−1 DCF and 2.55 g L−1 Alg/GrO containing 2 wt.% GrO), removal efficiencies exceeded 90%. Adsorption kinetics followed a pseudo-first-order model (R2 = 0.973), typical of physical adsorption, indicating that the adsorption rate depends on the number of available adsorption sites on the material surface. Equilibrium data best fit the Sips isotherm (R2 = 0.999), yielding a maximum capacity of 91.50 mg g−1 at 20 °C. Thermodynamic parameters confirmed a spontaneous (ΔG0 < 0) and exothermic adsorption process (ΔH0 = −17.05 kJ mol−1). Reusability tests demonstrated consistent performance across consecutive cycles. Overall, Alg/GrO hydrogel beads constitute an effective, sustainable, and reusable alternative for DCF removal.
Open AccessAlginate/Graphite Oxide Hydrogel Beads as a Sustainable Solution for Diclofenac Elimination in Aqueous Systems
Diclofenac (DCF) is a widespread pharmaceutical pollutant in aquatic environments requiring efficient treatment strategies. This study evaluated alginate/graphite oxide (Alg/GrO) hydrogel beads as a sustainable solution for removing DCF from aqueous systems. Graphite oxide, synthesized via a modified Hummers method, was incorporated into an alginate matrix. One-Factor-at-a-Time (OFAT) experiments were conducted to screen operational parameters, establishing that DCF adsorption was favored at pH 6.0, 200 rpm stirring speed, and 180 min contact time. Holding these parameters constant, the effects of the initial DCF concentration and Alg/GrO dosage were modeled and optimized using a Central Composite Design (CCD) combined with Response Surface Methodology (RSM). Under optimal conditions (34.2 mg L−1 DCF and 2.55 g L−1 Alg/GrO containing 2 wt.% GrO), removal efficiencies exceeded 90%. Adsorption kinetics followed a pseudo-first-order model (R2 = 0.973), typical of physical adsorption, indicating that the adsorption rate depends on the number of available adsorption sites on the material surface. Equilibrium data best fit the Sips isotherm (R2 = 0.999), yielding a maximum capacity of 91.50 mg g−1 at 20 °C. Thermodynamic parameters confirmed a spontaneous (ΔG0 < 0) and exothermic adsorption process (ΔH0 = −17.05 kJ mol−1). Reusability tests demonstrated consistent performance across consecutive cycles. Overall, Alg/GrO hydrogel beads constitute an effective, sustainable, and reusable alternative for DCF removal.
- Open Access
- 11 August 2026
- Published by MDPI AG in Chemengineering
- Vol. 10 (8) , 99
Thermally Modified Bentonite as an Effective Adsorbent for Caffeine Removal: A Techno-Economic Perspective
Caffeine has been recognized as an emerging pollutant in aquatic ecosystems due to its persistence. This study evaluated the techno-economic viability of caffeine removal using thermally modified bentonite (Na–Bent–400) as an adsorbent. Caffeine removal was simulated under two operational schemes: Scenario 1 (S1: Adsorption–Disposal), where Na–Bent–400 is discarded following saturation, and Scenario 2 (S2: Regeneration–Reuse–Disposal), which integrates adsorbent regeneration to enable the reuse of Na–Bent–400 in a second adsorption before final disposal. Using the optimized model for caffeine removal (95.97% removal efficiency in batch operation: 2.26 g/L Na–Bent–400, 30 mg/L caffeine, and pH 8), the process was scaled up through process simulation in Aspen Plus (V14) for a treatment flow rate of 8 L/s (252,288 m3/year). Capital expenditure (CapEx) was estimated at USD 331,004 without adsorbent regeneration (S1) and USD 486,725 with regeneration (S2), showing a 47% increase due to auxiliary equipment and operational complexity; however, integrating adsorbent regeneration minimizes long-term operational expenditures by reducing raw material requirements and wastewater treatment costs. Estimated water treatment costs based on operational expenditures (OpEx) are USD 1.38/m3 for S1 and USD 0.74/m3 for S2. A sensitivity study found that caffeine concentrations above 30 mg/L have little effect on treatment costs. By evaluating these scenarios, this study demonstrates the preliminary techno-economic viability of thermally modified bentonite for treating caffeine-contaminated agroindustry effluents.
- 11 August 2026
- Published by MDPI AG in Chemengineering
- Vol. 10 (8) , 99
Open AccessThermally Modified Bentonite as an Effective Adsorbent for Caffeine Removal: A Techno-Economic Perspective
Caffeine has been recognized as an emerging pollutant in aquatic ecosystems due to its persistence. This study evaluated the techno-economic viability of caffeine removal using thermally modified bentonite (Na–Bent–400) as an adsorbent. Caffeine removal was simulated under two operational schemes: Scenario 1 (S1: Adsorption–Disposal), where Na–Bent–400 is discarded following saturation, and Scenario 2 (S2: Regeneration–Reuse–Disposal), which integrates adsorbent regeneration to enable the reuse of Na–Bent–400 in a second adsorption before final disposal. Using the optimized model for caffeine removal (95.97% removal efficiency in batch operation: 2.26 g/L Na–Bent–400, 30 mg/L caffeine, and pH 8), the process was scaled up through process simulation in Aspen Plus (V14) for a treatment flow rate of 8 L/s (252,288 m3/year). Capital expenditure (CapEx) was estimated at USD 331,004 without adsorbent regeneration (S1) and USD 486,725 with regeneration (S2), showing a 47% increase due to auxiliary equipment and operational complexity; however, integrating adsorbent regeneration minimizes long-term operational expenditures by reducing raw material requirements and wastewater treatment costs. Estimated water treatment costs based on operational expenditures (OpEx) are USD 1.38/m3 for S1 and USD 0.74/m3 for S2. A sensitivity study found that caffeine concentrations above 30 mg/L have little effect on treatment costs. By evaluating these scenarios, this study demonstrates the preliminary techno-economic viability of thermally modified bentonite for treating caffeine-contaminated agroindustry effluents.
- Open Access
Peroxymonosulfate Activation by Co2+ for Metal-Complex Dye Degradation: Experimental Design and Kinetic Modeling
The discharge of metal-complex dyes from textile industries poses significant environmental challenges due to their chemical stability and resistance to conventional biological treatment. This study examined the degradation of Acid Black 194 (AB–194), a 1:2 chromium-complex azo dye, using Co2+-activated peroxymonosulfate (PMS). A central composite design based on response surface methodology was used to evaluate the effects of Co2+ (5.93–20.07 µM), PMS (1.67–7.33 mM), and dye (13.79–56.21 mg L−1) concentrations on decolorization and mineralization. The polynomial models demonstrated strong predictive accuracy (R2 > 0.9896), identifying Co2+ and dye concentrations as the most influential factors. Under optimal conditions (18.0 µM Co2+, 6.5 mM PMS, 20.0 mg L−1 dye), 99.19% decolorization was achieved at 30 min and 41.43% TOC removal at 240 min. Degradation kinetics were described by a mechanistic model incorporating 15 elementary reactions that comprise the Co2+/Co3+ redox cycle, radical generation, and dye oxidation, yielding a global R2 of 0.9617. Estimated rate constants for dye oxidation (k14 = 3.52 × 109 M–1 s–1 for and k15 = 2.00 × 1010 M–1 s–1 ) were consistent with values reported for aromatic compounds in sulfate radical systems. Radical contribution analysis confirmed sulfate radicals as the principal oxidizing species, accounting for 96.75% of the overall process.
Open AccessPeroxymonosulfate Activation by Co2+ for Metal-Complex Dye Degradation: Experimental Design and Kinetic Modeling
The discharge of metal-complex dyes from textile industries poses significant environmental challenges due to their chemical stability and resistance to conventional biological treatment. This study examined the degradation of Acid Black 194 (AB–194), a 1:2 chromium-complex azo dye, using Co2+-activated peroxymonosulfate (PMS). A central composite design based on response surface methodology was used to evaluate the effects of Co2+ (5.93–20.07 µM), PMS (1.67–7.33 mM), and dye (13.79–56.21 mg L−1) concentrations on decolorization and mineralization. The polynomial models demonstrated strong predictive accuracy (R2 > 0.9896), identifying Co2+ and dye concentrations as the most influential factors. Under optimal conditions (18.0 µM Co2+, 6.5 mM PMS, 20.0 mg L−1 dye), 99.19% decolorization was achieved at 30 min and 41.43% TOC removal at 240 min. Degradation kinetics were described by a mechanistic model incorporating 15 elementary reactions that comprise the Co2+/Co3+ redox cycle, radical generation, and dye oxidation, yielding a global R2 of 0.9617. Estimated rate constants for dye oxidation (k14 = 3.52 × 109 M–1 s–1 for and k15 = 2.00 × 1010 M–1 s–1 ) were consistent with values reported for aromatic compounds in sulfate radical systems. Radical contribution analysis confirmed sulfate radicals as the principal oxidizing species, accounting for 96.75% of the overall process.
- Open Access
Adsorption of Cr(VI) Using Organoclay/Alginate Hydrogel Beads and Their Application to Tannery Effluent
The tanning industry is among the most environmentally harmful activities globally due to the pollution of lakes and rivers from its effluents. Hexavalent chromium, a metal in tannery effluents, has adverse effects on human health and ecosystems, requiring the development of removal techniques. This study assessed the efficacy of organobentonite/alginate hydrogel beads in removing Cr(VI) from a fixed-bed adsorption column system. The synthesized organobentonite (OBent) was encapsulated in alginate, utilizing calcium chloride as a crosslinking agent to generate hydrogel beads. The effects of the volumetric flow rate, bed height, and initial Cr(VI) concentration on a synthetic sample were analyzed in the experiments in fixed-bed columns. The fractal-like modified Thomas model showed a good fit to the experimental data for the asymmetric breakthrough curves, confirmed by the high R2 correlation coefficients and low χ2 values. The application of organoclay/alginate hydrogel beads was confirmed with a wastewater sample from an artisanal tannery industry in Belén (Nariño, Colombia), in which a Cr(VI) removal greater than 99.81% was achieved. Organobentonite/alginate hydrogels offer the additional advantage of being composed of a biodegradable polymer (sodium alginate) and a natural material (bentonite-type clay), resulting in promising adsorbents for the removal of Cr(VI) from aqueous solutions in both synthetic and real water samples.
Open AccessAdsorption of Cr(VI) Using Organoclay/Alginate Hydrogel Beads and Their Application to Tannery Effluent
The tanning industry is among the most environmentally harmful activities globally due to the pollution of lakes and rivers from its effluents. Hexavalent chromium, a metal in tannery effluents, has adverse effects on human health and ecosystems, requiring the development of removal techniques. This study assessed the efficacy of organobentonite/alginate hydrogel beads in removing Cr(VI) from a fixed-bed adsorption column system. The synthesized organobentonite (OBent) was encapsulated in alginate, utilizing calcium chloride as a crosslinking agent to generate hydrogel beads. The effects of the volumetric flow rate, bed height, and initial Cr(VI) concentration on a synthetic sample were analyzed in the experiments in fixed-bed columns. The fractal-like modified Thomas model showed a good fit to the experimental data for the asymmetric breakthrough curves, confirmed by the high R2 correlation coefficients and low χ2 values. The application of organoclay/alginate hydrogel beads was confirmed with a wastewater sample from an artisanal tannery industry in Belén (Nariño, Colombia), in which a Cr(VI) removal greater than 99.81% was achieved. Organobentonite/alginate hydrogels offer the additional advantage of being composed of a biodegradable polymer (sodium alginate) and a natural material (bentonite-type clay), resulting in promising adsorbents for the removal of Cr(VI) from aqueous solutions in both synthetic and real water samples.
- Open Access
- 26 July 2024
- Published by MDPI AG in Chemengineering
- Vol. 8 (4) , 76
Integration of Ion Exchange—AOP—Biological System for the Treatment of Real Textile Wastewater
Real textile wastewater (RTWW) poses significant environmental challenges. RTWW typically contains high levels of organic compounds, such as dyes, as well as inorganic substances like salts. These contaminants can harm aquatic life when released into water bodies without appropriate treatment. RTWW was subjected to a series of sequential treatments: exchange resins for removing ions, advanced oxidation with bicarbonate-activated peroxide to degrade organic matter, and a biological treatment based on the Zahn–Wellens test to remove remaining chemical oxygen demand (COD) The advanced oxidation process based on the activation of H2O2 with NaHCO3 (catalyzed with cobalt impregnated on a pillared clay, Co/Al–PILC)) was optimized using central composite design (CCD) and response surface methodology (RSM). After the process integration, reductions in ion concentrations, chemical oxygen demand (COD), and total organic carbon content (TOC) were achieved. Reduced hardness (99.94%) and ions (SO42− and acid black 194 dye of 99.88 and 99.46%, respectively), COD (96.64%), and TOC (96.89%), guaranteeing complete treatment of RTWW, were achieved. Additionally, the biodegradability index of RTWW increased from 0.28 ± 0.01 to 0.90 ± 0.01, and phytotoxicity was reduced, going from a phytotoxic that inhibited the germination of lettuce seeds to a phytostimulant after biological treatment with activated sludge.
- 26 July 2024
- Published by MDPI AG in Chemengineering
- Vol. 8 (4) , 76
Open AccessIntegration of Ion Exchange—AOP—Biological System for the Treatment of Real Textile Wastewater
Real textile wastewater (RTWW) poses significant environmental challenges. RTWW typically contains high levels of organic compounds, such as dyes, as well as inorganic substances like salts. These contaminants can harm aquatic life when released into water bodies without appropriate treatment. RTWW was subjected to a series of sequential treatments: exchange resins for removing ions, advanced oxidation with bicarbonate-activated peroxide to degrade organic matter, and a biological treatment based on the Zahn–Wellens test to remove remaining chemical oxygen demand (COD) The advanced oxidation process based on the activation of H2O2 with NaHCO3 (catalyzed with cobalt impregnated on a pillared clay, Co/Al–PILC)) was optimized using central composite design (CCD) and response surface methodology (RSM). After the process integration, reductions in ion concentrations, chemical oxygen demand (COD), and total organic carbon content (TOC) were achieved. Reduced hardness (99.94%) and ions (SO42− and acid black 194 dye of 99.88 and 99.46%, respectively), COD (96.64%), and TOC (96.89%), guaranteeing complete treatment of RTWW, were achieved. Additionally, the biodegradability index of RTWW increased from 0.28 ± 0.01 to 0.90 ± 0.01, and phytotoxicity was reduced, going from a phytotoxic that inhibited the germination of lettuce seeds to a phytostimulant after biological treatment with activated sludge.
- Open Access
- 15 April 2024
- Published by MDPI AG in Colloids and Interfaces
- Vol. 8 (2) , 26
Caffeine Adsorption on a Thermally Modified Bentonite: Adsorbent Characterization, Experimental Design, Equilibrium and Kinetics
Caffeine is a chemical compound found in various products such as coffee, tea, and energy drinks; therefore, it is common in wastewater and surface water. The present study investigated caffeine adsorption on a thermally modified bentonite-type clay. The effects of the heat treatment of the adsorbent over the temperature range of 60–500 °C, as well as the initial pH of the solution, stirring speed, and contact time, on the removal of caffeine were analyzed. The adsorbent was characterized by XRF, XRD, FT–IR, thermal analysis (TGA–DSC), and N2 physisorption at 77 K. The response surface methodology (RSM) based on a central composite design (CCD) was used to evaluate and optimize the adsorption of caffeine in aqueous solution. The maximum adsorption capacity of caffeine obtained with the Langmuir model was 80.3 ± 2.1 mg/g (0.41 ± 0.01 mmol/g) at 25 °C under equilibrium conditions (initial pH = 8.0, stirring speed = 400 rpm, contact time = 120 min). A kinetic study showed that the pseudo-second-order and Elovich models adequately describe the adsorption process. Bentonite thermally modified at 400 °C can be considered a low-cost adsorbent with potential application for removing caffeine in aqueous media.
- 15 April 2024
- Published by MDPI AG in Colloids and Interfaces
- Vol. 8 (2) , 26
Open AccessCaffeine Adsorption on a Thermally Modified Bentonite: Adsorbent Characterization, Experimental Design, Equilibrium and Kinetics
Caffeine is a chemical compound found in various products such as coffee, tea, and energy drinks; therefore, it is common in wastewater and surface water. The present study investigated caffeine adsorption on a thermally modified bentonite-type clay. The effects of the heat treatment of the adsorbent over the temperature range of 60–500 °C, as well as the initial pH of the solution, stirring speed, and contact time, on the removal of caffeine were analyzed. The adsorbent was characterized by XRF, XRD, FT–IR, thermal analysis (TGA–DSC), and N2 physisorption at 77 K. The response surface methodology (RSM) based on a central composite design (CCD) was used to evaluate and optimize the adsorption of caffeine in aqueous solution. The maximum adsorption capacity of caffeine obtained with the Langmuir model was 80.3 ± 2.1 mg/g (0.41 ± 0.01 mmol/g) at 25 °C under equilibrium conditions (initial pH = 8.0, stirring speed = 400 rpm, contact time = 120 min). A kinetic study showed that the pseudo-second-order and Elovich models adequately describe the adsorption process. Bentonite thermally modified at 400 °C can be considered a low-cost adsorbent with potential application for removing caffeine in aqueous media.
- Open Access
- 8 January 2024
- Published by MDPI AG in Chemengineering
- Vol. 8 (1) , 14
Oxidation of Allura Red AC Using the NaHCO3-activated H2O2 System Catalyzed with Cobalt Supported on Al-PILC
The oxidation of aqueous solutions containing Allura Red AC (AR–AC) using bicarbonate-activated peroxide (BAP) and cobalt-impregnated pillared clay (Co/Al–PILC) as the catalyst was investigated. Using the CCD-RMS approach (central composite design–response surface methodology), the effects of dye, H2O2, and NaHCO3 concentrations on AR–AC degradation were studied. The decolorization, total nitrogen (TN), and total carbon (TC) removals were the analyzed responses, and the experimental data were fitted to empirical quadratic equations for these responses, obtaining coefficients of determination R2 and adjusted-R2 higher than 0.9528. The multi-objective optimization conditions were [dye] = 21.25 mg/L, [H2O2] = 2.59 mM, [NaHCO3] = 1.25 mM, and a catalyst loading of 2 g/L. Under these conditions, a decolorization greater than 99.43% was obtained, as well as TN and TC removals of 72.82 and 18.74%, respectively, with the added advantage of showing cobalt leaching below 0.01 mg/L. Chromatographic analyses (GC–MS and HPLC) were used to identify some reaction intermediates and by-products. This research showed that wastewater containing azo dyes may be treated using the cobalt-catalyzed BAP system in heterogeneous media.
- 8 January 2024
- Published by MDPI AG in Chemengineering
- Vol. 8 (1) , 14
Open AccessOxidation of Allura Red AC Using the NaHCO3-activated H2O2 System Catalyzed with Cobalt Supported on Al-PILC
The oxidation of aqueous solutions containing Allura Red AC (AR–AC) using bicarbonate-activated peroxide (BAP) and cobalt-impregnated pillared clay (Co/Al–PILC) as the catalyst was investigated. Using the CCD-RMS approach (central composite design–response surface methodology), the effects of dye, H2O2, and NaHCO3 concentrations on AR–AC degradation were studied. The decolorization, total nitrogen (TN), and total carbon (TC) removals were the analyzed responses, and the experimental data were fitted to empirical quadratic equations for these responses, obtaining coefficients of determination R2 and adjusted-R2 higher than 0.9528. The multi-objective optimization conditions were [dye] = 21.25 mg/L, [H2O2] = 2.59 mM, [NaHCO3] = 1.25 mM, and a catalyst loading of 2 g/L. Under these conditions, a decolorization greater than 99.43% was obtained, as well as TN and TC removals of 72.82 and 18.74%, respectively, with the added advantage of showing cobalt leaching below 0.01 mg/L. Chromatographic analyses (GC–MS and HPLC) were used to identify some reaction intermediates and by-products. This research showed that wastewater containing azo dyes may be treated using the cobalt-catalyzed BAP system in heterogeneous media.
- Open Access
- 14 September 2023
- Published by MDPI AG in Chemengineering
- Vol. 7 (5) , 86
Bicarbonate-Activated Hydrogen Peroxide for an Azo Dye Degradation: Experimental Design
The present study investigated the degradation of an aqueous Allura Red AC (AR–AC) solution by activating hydrogen peroxide with bicarbonate using cobalt ion (Co2+) as the catalyst. Four independent variables (H2O2, NaHCO3, Co2+, and dye concentrations) were analyzed in the composite central design (CCD). AR–AC degradation was optimized using the response surface methodology (RSM). Under optimal degradation conditions (41.86 mg/L AR–AC, 5.58 mM H2O2, 2.00 mM NaHCO3, and 9.00 µM Co2+), decolorization > 99.86%, mineralization (CO2 to conversion) of 12.99%, and total nitrogen removal of 51.97% were achieved. The predicted values for the three response variables were consistent with the experimental values, with determination coefficients (R2) greater than 0.9053. Because cobalt ions (Co2+) are a source of water pollution, after oxidation, these were adsorbed on sodium bentonite (Na–Bent), obtaining a final concentration of <0.01 mg/L. Bicarbonate-activated hydrogen peroxide is a potential technology for dye wastewater treatment that operates at an alkaline pH and at ambient temperature.
- 14 September 2023
- Published by MDPI AG in Chemengineering
- Vol. 7 (5) , 86
Open AccessBicarbonate-Activated Hydrogen Peroxide for an Azo Dye Degradation: Experimental Design
The present study investigated the degradation of an aqueous Allura Red AC (AR–AC) solution by activating hydrogen peroxide with bicarbonate using cobalt ion (Co2+) as the catalyst. Four independent variables (H2O2, NaHCO3, Co2+, and dye concentrations) were analyzed in the composite central design (CCD). AR–AC degradation was optimized using the response surface methodology (RSM). Under optimal degradation conditions (41.86 mg/L AR–AC, 5.58 mM H2O2, 2.00 mM NaHCO3, and 9.00 µM Co2+), decolorization > 99.86%, mineralization (CO2 to conversion) of 12.99%, and total nitrogen removal of 51.97% were achieved. The predicted values for the three response variables were consistent with the experimental values, with determination coefficients (R2) greater than 0.9053. Because cobalt ions (Co2+) are a source of water pollution, after oxidation, these were adsorbed on sodium bentonite (Na–Bent), obtaining a final concentration of <0.01 mg/L. Bicarbonate-activated hydrogen peroxide is a potential technology for dye wastewater treatment that operates at an alkaline pH and at ambient temperature.