GPGabriel Peña-Rodríguez

Gabriel Peña-Rodríguez

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Gabriel Peña-Rodríguez has a total of 49 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Machine Learning-Enhanced Modeling of Heavy Metal Adsorption onto Coal Fly Ash-Derived Zeolite P

    by Benito A. Hernández-Guerrero, Lorena Martínez, Gabriel Peña-Rodríguez, Fernando Trejo

    Zeolite P was synthesized by hydrothermal treatment of coal fly ash and applied to the individual removal of six heavy metals (Pb2+, Ni2+, Cu2+, Cr3+, Hg2+, Cd2+) from aqueous solutions. Characterization by SEM-EDS, FTIR, BET, XRD, zeta potential, and XPS revealed a BET surface area of 30 m2/g, Si/Al ratio of 1.63, and pHpzc of 3.2. Batch experiments at the natural solution pH of 3.9 in all cases (C0 = 10, 100, 200 mg/L; t = 1–60 min) yielded an apparent selectivity sequence at C0 = 200 mg/L of Hg2+ (10.47 mg/g) > Pb2+ (9.12) > Ni2+ (2.18) > Cr3+ (2.05) > Cu2+ (1.82) > Cd2+ (1.26), where Hg2+ and Pb2+ reached near-equilibrium while the remaining metals were still approaching it at t = 60 min. Weber–Morris and Boyd analyses confirmed three sequential diffusion stages with a concentration-dependent shift from film to intraparticle diffusion control through the narrow GIS channels (3.1 × 4.5 Å). Ion exchange was identified as the dominant mechanism based on convergent kinetic, diffusion, XPS, and selectivity–electronegativity evidence (r = +0.76). A leakage-free machine learning framework combining physicochemical descriptors with experimental variables was tested under three cross-validation strategies of increasing stringency. Gradient Boosting achieved R2 = 0.979 ± 0.043 (repeated K-Fold) and R2 = 0.880 on six completely held-out kinetic curves. An ablation study confirmed that physicochemical descriptors are essential (experimental-only models yielded negative R2). SHAP feature importance rankings were consistent with established ion exchange selectivity theory. This work demonstrates that group-level validation, physics-informed descriptors, and systematic ablation testing are able to identify both the capabilities and the boundaries of small-dataset ML when testing for metal kinetics prediction.


  • Open Access

    Potential use of electrochemically synthesized silver nanoparticles on rice panicle blight pathogen, Burkholderia glumae

    by Giovanni Chaves-Bedoya, Hilda Angélica Padilla, Luz Yineth Ortiz-Rojas, Gabriel Peña-Rodríguez

    Burkholderia glumae, is the main causal agent of bacterial panicle blight (BPB) in rice (Oriza sativa), a disease that generates production losses worldwide. Despite its economic importance, effective control measures and rice varieties with complete resistance to this disease have not yet been available. In this study, the antimicrobial activity of electrochemically synthesized silver nanoparticles (AgNPs) against B. glumae was evaluated. The AgNPs were synthesized with a DC power supply (UNI-T®) regulated at 24 V, which was connected to two cylindrical electrodes of high purity silver (Aldrich-99.99%) using distilled water as an electrolyte. The AgNPs concentration was determined by measuring the total dissolved solids (TDS) with a HandyLab 680 FK multiparameter. The antibacterial activity of these nanoparticles against B. glumae was determined by the broth macrodilution method at different concentrations (1-10 mg L-1). The minimum inhibitory concentration (MIC) was determined in 5 mg L-1 of AgNPs. The results revealed that AgNPs are a promising nanopesticide for controlling the BPB disease in rice.


  • Propiedades electromagnéticas de un compuesto magneto dieléctrico a través de un algoritmo basado en el método Nicolson-Ross-Weir

    by Gabriel Peña Rodríguez, Rodrigo Vera Barrera, David Leonardo Mancipe Huérfano, Luis Ángel Lara González

    The present work implements the Nicolson-Ross-Weir (NRW) method to find the permittivity and permeability through an algorithm in Matlab® of a magneto - dielectric composed material made of polyester resin and magnetite powders randomly dispersed and oriented vertically and horizontally in the polymeric matrix. The measured data come from the simulation of the S parameters in ADS® between 150 kHz and 4GHz, on a microstrip type transmission line. The algorithm allowed to verify that the best response in high frequency of the magneto - dielectric composed where the vertically orientedparticles, present the highest relative permittivity obtaining Er= 5.5 for 30% wt concentration and Er= 4.5 concentration of 20% wt, with an absorption coefficient which increases in function of frequency and the concentration of magnetite in the functional filler.


  • Open Access

    Effective thermal properties and proximate analysis of coke-coal fines mixtures

    by M F Soto-Rivero, A C Quintero-Garzón, G Peña-Rodríguez, L A Miranda-Molina, G Sepulveda-Solano

    We report the effective thermal properties at room temperature and proximate analysis of three mixtures of coke and carbon fines formed by uniaxial pressing at 30 MPa. Using differential scanning calorimetry and thermogravimetry, the thermal behavior of the carbon samples was determined. The KD2 Pro® system was used to measure the effective thermal properties, while the proximate analysis was carried out applying the ASTM D 3172-89 standard. It was found for coke fines that in the range between 40.00 °C and 293.94 °C there is a loss in weight of 3.2%, which corresponds to the degradation of low molecular weight volatiles, another degradation was also observed between 90.07 °C and 336.21 °C, and the maximum devolatilization temperature was 579 °C, finally from 700 °C the melting process begins, which corresponds to the formation of coke. It was also observed that the thermal conductivity increases with increasing coke concentration in the sample, and that the mixture with the highest thermal diffusivity was the one formed with 80% coke fines and 20% carbon fines. According to the thermal properties of the samples can be to be used efficiently as fuel.


  • Open Access

    Optimization of the Tensile Properties of Polymeric Matrix Composites Reinforced with Magnetite Particles by Experimental Design

    by Luis Ángel Lara-González, Wilmar Guillermo-Rodríguez, Yaneth Pineda-Triana, Gabriel Peña-Rodríguez, Hugo Felipe Salazar

    A full-factorial 33 experiment was used in this study to determine the optimal values of the tensile properties of three composite materials manufactured based on three polymeric resins: Derakane Momentum epoxy vinyl ester based on bisphenol-A (DM-411), polyester based on terephthalic acid (P115-A), and isophthalic polyester (P2000). Such materials were reinforced with magnetite powders at concentrations of 10, 20, and 30 wt %, and the particle sizes were classified with three sieves: #200 (46–75 μm), #325 (26–45 μm), and #500 (0–25 μm). The compounds were manufactured using the hand lay-up method at room temperature in accordance with ASTM D638-14 for M1-type specimens. A tensile test was conducted on a universal Microtest EM2/300/FR machine at a test speed of 5 ± 25 % mm/min using an Epsilon extensometer calibrated in accordance with the ASTM E83 standard at 20 ± 2 °C. The magnetite powders and compound morphology were studied by Scanning Electron Microscopy. The mechanical properties of the compounds and the optimal response found by Analysis of Variance (ANOVA) and Response Surface Methodology (RSM) are also reported. The best response to the mechanical stimuli occurs with the composite material prepared with the epoxy vinyl ester resin DM-411, a concentration of 29.4 % of magnetite (Fe3O4), a particle size of 58.5 microns, and a 200 sieve.


  • Open Access

    Sodic and Potassium Zeolites from Fly Ash Coming from Coal Combustion of Thermoelectric Termotasajero S.A.S

    by Edgar Farid Carreño Flórez, Martha Yasmid Ferrer Pacheco, Gabriel Peña Rodríguez

    The fly ash (CV) of Termotasajero S.A.S, is a residue of coal combustion with high environmental impact on air, water, soil and ecosystems. They have a high content of Si and Al, which makes them an optimal by-product for the production of zeolites. The CV were sieved and leached in order to produce high purity zeolites. The synthesis was carried out by the hydrogel method in activation with alkalis of NaOH-2M and KOH-5M, crystallization of 2h and 3h respectively, at 90° C and 560 rpm. The sodium and potassium zeolites presented a Si/Al molar ration of 1.19 and 1.00 respectively, which were classified as zeolites natrosilite and zeolite K-F, according to the ray-X diffraction pattern (DRX). In the zeolitic product, the main elements were identified as Si, Al, O, Na, K, Ca, Fe, and in smaller proportions Ti and Mg, with irregular morphology of microcrystals with particle sizes less than 12 micrometers (μm). The analysis of Cationic Exchange Capability (CIC) shows the ionic capability of the material, finding that the highest value (141 meq/100g) corresponds to the zeolites activated with NaOH.


  • Open Access

    Utilización de tierras diatomáceas recicladas de la industria cerveceracomo medio de transporte de macronutrientes

    by Gabriel Peña-Rodrígue, Marlon HansRodríguez, Ever Becerra, Xandro Caballero, Jaime Dulce-Moreno

    Se reporta la caracterización físico-química de tierras diatomáceas recicladas de la industriacervecera, y su usocomomedio de transporte de macronutrientes (Nitrógeno, Fósforo, Potasio (NPK)), con el fin de dar una alternativa amigable con el ambiente, a los desechos generados enel subproceso de filtración de la cerveza.Para la conformación de las muestras (pellets) por extrusión,se utilizó como aglutinantes carboximetilcelulosa (CMC) y fécula de maíz, mientras que la humectación se llevó a cabo usando una solución líquida comercial con 15% de NPK,en concentración baja, media y alta, lacual se agregódurante el proceso de conformado de los pellets.La caracterización química de las muestras se realizó usando espectroscopía de absorción atómica(AA), y microanálisis mediante espectroscopia de energías dispersas(EDS), la morfología superficial se estudió usando microscopia electrónica de barrido (MEB).El comportamiento de la capacidad de devolución de los macronutrientes aun medio acuoso se llevó a cabo por medio del análisis de la conductividadeléctrica(EC)y sólidos totales disueltos (TDS)en función del tiempo mediante el multiparámetro SI Analytics 680 K. Se encontró que la muestra que no presentó pérdida de su estructuraen medio acuosofue la conformada por 60% de diatomita, 10% de CMC y 30% de fécula de maíz(%w/w). También se evidenció un incrementoen el tiempo de la EC y TDS de la solución acuosa cuando se sumergían los pellets activados, infiriéndose que éstos son un buen medio se trasporte de macronutrientes, los cuales podrán ser usados como abono en aplicaciones agrícolas coadyuvando al medio ambiente.