Tobias Klein
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Tobias Klein has a total of 75 co-authors. Here are the top co-authors by number of shared publications:
- Konstantin Schneider
Biochemical Engineering Institute, Saarland University, Saarbrücken, Germany
7 shared publications - Christoph Herwig
Lisalis GmbH, Jenbachgasse 73-2, 1130 Vienna, Austria
4 shared publications Elmar Heinzle
§Biochemical Engineering Institute, Saarland University, 66123 Saarbrücken, Germany
4 shared publications- Alain Walcarius
Université de Lorraine, CNRS, LCPME
2 shared publications - Elmar Heinzle
Biochemical Engineering Institute, Saarland University, Campus A1.5, Saarbrücken, Germany
2 shared publications Gert-Wieland Kohring
Microbiology, Saarland University , Campus, Geb. A1.5, D-66123 Saarbruecken, Germany
2 shared publications
Latest Publications
- 1 January 2023
- Published by VDI Media GmbH
- p. 1017-1026
Digitalization of the Gear Development Process – Chances, Benefits and Risks
Foreword The International Conference on Gears in Garching near Munich, Germany, is an established platform for researchers on and manufacturers of gears and transmission systems. At the 10th issue of the conference in September of 2023, gear experts discussed the latest developments and research results from the powertrain industry and academia. Given the increasing challenges of climate change and its impacts, acting in compliance with the UN Sustainable Development Goals is mandatory for all engineers today. Gear engineers must consider these objectives in their research and development activities and provide solutions that meet the technical requirements and contribute to achieving the UN goals. Greenhouse gas (GHG) emission is a primary driver for climate change. Reducing GHG emissions should be an urgent action for the combat against climate change. Therefore, the research on efficiency is assigned a key role. Several contributions in this report discuss the possibilities for further improvement in efficiency from different points of view, like gear design or lubrication. Other subjects of the conferences are Responsible Consumption and Production. H...
- 1 January 2023
- Published by VDI Media GmbH
- p. 1017-1026
Digitalization of the Gear Development Process – Chances, Benefits and Risks
Foreword The International Conference on Gears in Garching near Munich, Germany, is an established platform for researchers on and manufacturers of gears and transmission systems. At the 10th issue of the conference in September of 2023, gear experts discussed the latest developments and research results from the powertrain industry and academia. Given the increasing challenges of climate change and its impacts, acting in compliance with the UN Sustainable Development Goals is mandatory for all engineers today. Gear engineers must consider these objectives in their research and development activities and provide solutions that meet the technical requirements and contribute to achieving the UN goals. Greenhouse gas (GHG) emission is a primary driver for climate change. Reducing GHG emissions should be an urgent action for the combat against climate change. Therefore, the research on efficiency is assigned a key role. Several contributions in this report discuss the possibilities for further improvement in efficiency from different points of view, like gear design or lubrication. Other subjects of the conferences are Responsible Consumption and Production. H...
- Open Access
- 11 March 2019
- Published by Springer Nature in Microbial Cell Factories
- Vol. 18 (1) , 1-11
Exploring small-scale chemostats to scale up microbial processes: 3-hydroxypropionic acid production in S. cerevisiae
The physiological characterization of microorganisms provides valuable information for bioprocess development. Chemostat cultivations are a powerful tool for this purpose, as they allow defined changes to one single parameter at a time, which is most commonly the growth rate. The subsequent establishment of a steady state then permits constant variables enabling the acquisition of reproducible data sets for comparing microbial performance under different conditions. We performed physiological characterizations of a 3-hydroxypropionic acid (3-HP) producing Saccharomyces cerevisiae strain in a miniaturized and parallelized chemostat cultivation system. The physiological conditions under investigation were various growth rates controlled by different nutrient limitations (C, N, P). Based on the cultivation parameters obtained subsequent fed-batch cultivations were designed. We report technical advancements of a small-scale chemostat cultivation system and its applicability for reliable strain screening under different physiological conditions, i.e. varying dilution rates and different substrate limitations (C, N, P). Exploring the performance of an engineered 3-HP producing S. cerevisiae strain under carbon-limiting conditions revealed the highest 3-HP yields per substrate and biomass of 16.6 %C-mol and 0.43 g gCDW−1, respectively, at the lowest set dilution rate of 0.04 h−1. 3-HP production was further optimized by applying N- and P-limiting conditions, which resulted in a further increase in 3-HP yields revealing values of 21.1 %C-mol and 0.50 g gCDW−1 under phosphate-limiting conditions. The corresponding parameters favoring an increased 3-HP production, i.e. dilution rate as well as C- and P-limiting conditions, were transferred from the small-scale chemostat cultivation system to 1-L bench-top fermenters operating in fed-batch conditions, revealing 3-HP yields of 15.9 %C-mol and 0.45 g gCDW−1 under C-limiting, as well as 25.6 %C-mol and 0.50 g gCDW−1 under phosphate-limiting conditions. Small-scale chemostat cultures are well suited for the physiological characterization of microorganisms, particularly for investigating the effect of changing cultivation parameters on microbial performance. In our study, optimal conditions for 3-HP production comprised (i) a low dilution rate of 0.04 h−1 under carbon-limiting conditions and (ii) the use of phosphate-limiting conditions. Similar 3-HP yields were achieved in chemostat and fed-batch cultures under both C- and P-limiting conditions proving the growth rate as robust parameter for process transfer and thus the small-scale chemostat system as powerful tool for process optimization.
- 11 March 2019
- Published by Springer Nature in Microbial Cell Factories
- Vol. 18 (1) , 1-11
Open AccessExploring small-scale chemostats to scale up microbial processes: 3-hydroxypropionic acid production in S. cerevisiae
The physiological characterization of microorganisms provides valuable information for bioprocess development. Chemostat cultivations are a powerful tool for this purpose, as they allow defined changes to one single parameter at a time, which is most commonly the growth rate. The subsequent establishment of a steady state then permits constant variables enabling the acquisition of reproducible data sets for comparing microbial performance under different conditions. We performed physiological characterizations of a 3-hydroxypropionic acid (3-HP) producing Saccharomyces cerevisiae strain in a miniaturized and parallelized chemostat cultivation system. The physiological conditions under investigation were various growth rates controlled by different nutrient limitations (C, N, P). Based on the cultivation parameters obtained subsequent fed-batch cultivations were designed. We report technical advancements of a small-scale chemostat cultivation system and its applicability for reliable strain screening under different physiological conditions, i.e. varying dilution rates and different substrate limitations (C, N, P). Exploring the performance of an engineered 3-HP producing S. cerevisiae strain under carbon-limiting conditions revealed the highest 3-HP yields per substrate and biomass of 16.6 %C-mol and 0.43 g gCDW−1, respectively, at the lowest set dilution rate of 0.04 h−1. 3-HP production was further optimized by applying N- and P-limiting conditions, which resulted in a further increase in 3-HP yields revealing values of 21.1 %C-mol and 0.50 g gCDW−1 under phosphate-limiting conditions. The corresponding parameters favoring an increased 3-HP production, i.e. dilution rate as well as C- and P-limiting conditions, were transferred from the small-scale chemostat cultivation system to 1-L bench-top fermenters operating in fed-batch conditions, revealing 3-HP yields of 15.9 %C-mol and 0.45 g gCDW−1 under C-limiting, as well as 25.6 %C-mol and 0.50 g gCDW−1 under phosphate-limiting conditions. Small-scale chemostat cultures are well suited for the physiological characterization of microorganisms, particularly for investigating the effect of changing cultivation parameters on microbial performance. In our study, optimal conditions for 3-HP production comprised (i) a low dilution rate of 0.04 h−1 under carbon-limiting conditions and (ii) the use of phosphate-limiting conditions. Similar 3-HP yields were achieved in chemostat and fed-batch cultures under both C- and P-limiting conditions proving the growth rate as robust parameter for process transfer and thus the small-scale chemostat system as powerful tool for process optimization.
- 3 February 2019
- Published by Wiley in Biotechnology and Bioengineering
- Vol. 116 (6) , 1326-1340
Introducing substrate limitations to overcome catabolite repression in a protease producing Bacillus licheniformis strain using membrane‐based fed‐batch shake flasks
To overcome catabolite repression, industrial fermentation processes are usually operated in substrate‐limited fed‐batch mode. Therefore, the implementation of such an operating mode at small scale is crucial to maintain comparable process conditions. In this study, Bacillus licheniformis, a well‐known producer of proteases, was cultivated with carbon (glucose)‐ and nitrogen (ammonium)‐limited fed‐batch conditions using the previously introduced membrane‐based fed‐batch shake flasks. A repression of protease production by glucose and ammonium was thus avoided and yields increased 1.5‐ and 2.1‐fold relative to batch, respectively. An elevated feeding rate of glucose caused depletion of ammonium, which was recognizable within the oxygen transfer rate (OTR) signal measured with the Respiration Activity MOnitoring System (RAMOS). Ammonium limitation was prevented by feeding ammonium simultaneously with glucose. The OTR signal clearly indicated the initiation of the fed‐batch phase and gave direct feedback on the nutrient release kinetics. Increased feeding rates of glucose and ammonium led to an elevated protease activity without affecting the protease yield (YP/Glu). In addition to YP/Glu, protease yields were determined based on the metabolized amount of oxygen . The results showed that the protease production correlated with the amount of consumed glucose as well as with the amount of consumed oxygen. The membrane‐based fed‐batch shake flask in combination with the RAMOS device is a powerful combination to investigate the effect of substrate‐limited fed‐batch conditions.
- 3 February 2019
- Published by Wiley in Biotechnology and Bioengineering
- Vol. 116 (6) , 1326-1340
Introducing substrate limitations to overcome catabolite repression in a protease producing Bacillus licheniformis strain using membrane‐based fed‐batch shake flasks
To overcome catabolite repression, industrial fermentation processes are usually operated in substrate‐limited fed‐batch mode. Therefore, the implementation of such an operating mode at small scale is crucial to maintain comparable process conditions. In this study, Bacillus licheniformis, a well‐known producer of proteases, was cultivated with carbon (glucose)‐ and nitrogen (ammonium)‐limited fed‐batch conditions using the previously introduced membrane‐based fed‐batch shake flasks. A repression of protease production by glucose and ammonium was thus avoided and yields increased 1.5‐ and 2.1‐fold relative to batch, respectively. An elevated feeding rate of glucose caused depletion of ammonium, which was recognizable within the oxygen transfer rate (OTR) signal measured with the Respiration Activity MOnitoring System (RAMOS). Ammonium limitation was prevented by feeding ammonium simultaneously with glucose. The OTR signal clearly indicated the initiation of the fed‐batch phase and gave direct feedback on the nutrient release kinetics. Increased feeding rates of glucose and ammonium led to an elevated protease activity without affecting the protease yield (YP/Glu). In addition to YP/Glu, protease yields were determined based on the metabolized amount of oxygen . The results showed that the protease production correlated with the amount of consumed glucose as well as with the amount of consumed oxygen. The membrane‐based fed‐batch shake flask in combination with the RAMOS device is a powerful combination to investigate the effect of substrate‐limited fed‐batch conditions.
- Open Access
- 1 June 2018
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 93 (8) , 2141-2151
Media photo‐degradation in pharmaceutical biotechnology – impact of ambient light on media quality, cell physiology, and IgG production in CHO cultures
BACKGROUND: Many vital components in bioprocess media are prone to photo‐conversion or photo‐degradation upon exposure to ambient light, with severe negative consequences for biomass yield and overall productivity. However, there is only limited awareness of light irradiation as a potential risk factor when working in transparent glass bioreactors, storage vessels or disposable bag systems. The chemical complexity of most media renders a root‐cause analysis difficult. This study investigated in a novel, holistic approach how light‐induced changes in media composition relate to alterations in radical burden, cell physiology, morphology, and product formation in industrial Chinese hamster ovary (CHO) bioprocesses.RESULTS: Two media formulations from proprietary and commercial sources were tested in a pre‐hoc light exposure scenario prior to cultivation. Using fluorescence excitation/emission (EEM) matrix spectroscopy, a photo‐sensitization of riboflavin was identified as a likely cause for drastically decreased IgG titers (up to −80%) and specific growth rates (−50% to −90%). Up to three‐fold higher radical levels were observed in photo‐degraded medium. On the biological side, this resulted in significant changes in cell morphology and aberrations in the normal IgG biosynthesis/secretion pathway.CONCLUSION: These findings clearly illustrate the underrated impact of room light after only short periods of exposure, occurring accidentally or knowingly during bioprocess development and scale‐ up. The detrimental effects, which may share a common mechanistic cause at the molecular level, correlate well with changes in spectroscopic properties. This offers new perspectives for online monitoring concepts, and improved detectability of such effects in future. © 2018 The Authors. Journal of Chemical Technology & Biotechnology published by JohnWiley & Sons Ltd on behalf of Society of Chemical Industry.
- 1 June 2018
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 93 (8) , 2141-2151
Open AccessMedia photo‐degradation in pharmaceutical biotechnology – impact of ambient light on media quality, cell physiology, and IgG production in CHO cultures
BACKGROUND: Many vital components in bioprocess media are prone to photo‐conversion or photo‐degradation upon exposure to ambient light, with severe negative consequences for biomass yield and overall productivity. However, there is only limited awareness of light irradiation as a potential risk factor when working in transparent glass bioreactors, storage vessels or disposable bag systems. The chemical complexity of most media renders a root‐cause analysis difficult. This study investigated in a novel, holistic approach how light‐induced changes in media composition relate to alterations in radical burden, cell physiology, morphology, and product formation in industrial Chinese hamster ovary (CHO) bioprocesses.RESULTS: Two media formulations from proprietary and commercial sources were tested in a pre‐hoc light exposure scenario prior to cultivation. Using fluorescence excitation/emission (EEM) matrix spectroscopy, a photo‐sensitization of riboflavin was identified as a likely cause for drastically decreased IgG titers (up to −80%) and specific growth rates (−50% to −90%). Up to three‐fold higher radical levels were observed in photo‐degraded medium. On the biological side, this resulted in significant changes in cell morphology and aberrations in the normal IgG biosynthesis/secretion pathway.CONCLUSION: These findings clearly illustrate the underrated impact of room light after only short periods of exposure, occurring accidentally or knowingly during bioprocess development and scale‐ up. The detrimental effects, which may share a common mechanistic cause at the molecular level, correlate well with changes in spectroscopic properties. This offers new perspectives for online monitoring concepts, and improved detectability of such effects in future. © 2018 The Authors. Journal of Chemical Technology & Biotechnology published by JohnWiley & Sons Ltd on behalf of Society of Chemical Industry.
- 19 December 2017
- Published by Wiley in Engineering in Life Sciences
- Vol. 18 (3) , 204-214
Elevated pCO2 affects the lactate metabolic shift in CHO cell culture processes
The shift from lactate production to consumption in CHO cell metabolism is a key event during cell culture cultivations and is connected to increased culture longevity and final product titers. However, the mechanisms controlling this metabolic shift are not yet fully understood. Variations in lactate metabolism have been mainly reported to be induced by process pH and availability of substrates like glucose and glutamine. The aim of this study was to investigate the effects of elevated pCO2 concentrations on the lactate metabolic shift phenomena in CHO cell culture processes. In this publication, we show that at elevated pCO2 in batch and fed‐batch cultures, the lactate metabolic shift was absent in comparison to control cultures at lower pCO2 values. Furthermore, through metabolic flux analysis we found a link between the lactate metabolic shift and the ratio of NADH producing and regenerating intracellular pathways. This ratio was mainly affected by a reduced oxidative capacity of cultures at elevated pCO2. The presented results are especially interesting for large‐scale and perfusion processes where increased pCO2 concentrations are likely to occur. Our results suggest, that so far unexplained metabolic changes may be connected to increased pCO2 accumulation in larger scale fermentations. Finally, we propose several mechanisms through which increased pCO2 might affect the cell metabolism and briefly discuss methods to enable the lactate metabolic shift during cell cultivations.
- 19 December 2017
- Published by Wiley in Engineering in Life Sciences
- Vol. 18 (3) , 204-214
Elevated pCO2 affects the lactate metabolic shift in CHO cell culture processes
The shift from lactate production to consumption in CHO cell metabolism is a key event during cell culture cultivations and is connected to increased culture longevity and final product titers. However, the mechanisms controlling this metabolic shift are not yet fully understood. Variations in lactate metabolism have been mainly reported to be induced by process pH and availability of substrates like glucose and glutamine. The aim of this study was to investigate the effects of elevated pCO2 concentrations on the lactate metabolic shift phenomena in CHO cell culture processes. In this publication, we show that at elevated pCO2 in batch and fed‐batch cultures, the lactate metabolic shift was absent in comparison to control cultures at lower pCO2 values. Furthermore, through metabolic flux analysis we found a link between the lactate metabolic shift and the ratio of NADH producing and regenerating intracellular pathways. This ratio was mainly affected by a reduced oxidative capacity of cultures at elevated pCO2. The presented results are especially interesting for large‐scale and perfusion processes where increased pCO2 concentrations are likely to occur. Our results suggest, that so far unexplained metabolic changes may be connected to increased pCO2 accumulation in larger scale fermentations. Finally, we propose several mechanisms through which increased pCO2 might affect the cell metabolism and briefly discuss methods to enable the lactate metabolic shift during cell cultivations.
- 1 January 2017
- Published by Elsevier in Metabolic Engineering
- Vol. 39, 141-150
Increased production of L-serine in Escherichia coli through Adaptive Laboratory Evolution
- 1 January 2017
- Published by Elsevier in Metabolic Engineering
- Vol. 39, 141-150
Increased production of L-serine in Escherichia coli through Adaptive Laboratory Evolution
- Open Access
- 1 October 2016
- Published by Elsevier in Molecular & Cellular Proteomics
- Vol. 15 (10) , 3090-3106
Comparative Proteome Analysis in Schizosaccharomyces pombe Identifies Metabolic Targets to Improve Protein Production and Secretion
- 1 October 2016
- Published by Elsevier in Molecular & Cellular Proteomics
- Vol. 15 (10) , 3090-3106
Open AccessComparative Proteome Analysis in Schizosaccharomyces pombe Identifies Metabolic Targets to Improve Protein Production and Secretion
- 29 June 2016
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 8 (27) , 17591-17598
Immobilization of Cysteine-Tagged Proteins on Electrode Surfaces by Thiol–Ene Click Chemistry
Thiol-ene click chemistry can be exploited for the immobilization of cysteine-tagged dehydrogenases in an active form onto carbon electrodes (glassy carbon and carbon felt). The electrode surfaces have been first modified with vinylphenyl groups by electrochemical reduction of the corresponding diazonium salts generated in situ from 4-vinylaniline. The grafting process has been optimized in order not to hinder the electrochemical regeneration of NAD+/NADH cofactor and soluble mediators such as ferrocenedimethanol and [Cp*Rh(bpy)Cl]+. Having demonstrated the feasibility of thiol-ene click chemistry for attaching ferrocene moieties onto those carbon surfaces, the same approach was then applied to the immobilization of D-sorbitol dehydrogenases with cysteine tag. These proteins can be effectively immobilized (as pointed out by XPS), and the cysteine tag (either 1 or 2 cysteine moieties at the N terminus of the polypeptide chain) was proven to maintain the enzymatic activity of the dehydrogenase upon grafting. The bioelectrode was applied to electroenzymatic enantioselective reduction of D-fructose to D-sorbitol, as a case study.
- 29 June 2016
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 8 (27) , 17591-17598
Immobilization of Cysteine-Tagged Proteins on Electrode Surfaces by Thiol–Ene Click Chemistry
Thiol-ene click chemistry can be exploited for the immobilization of cysteine-tagged dehydrogenases in an active form onto carbon electrodes (glassy carbon and carbon felt). The electrode surfaces have been first modified with vinylphenyl groups by electrochemical reduction of the corresponding diazonium salts generated in situ from 4-vinylaniline. The grafting process has been optimized in order not to hinder the electrochemical regeneration of NAD+/NADH cofactor and soluble mediators such as ferrocenedimethanol and [Cp*Rh(bpy)Cl]+. Having demonstrated the feasibility of thiol-ene click chemistry for attaching ferrocene moieties onto those carbon surfaces, the same approach was then applied to the immobilization of D-sorbitol dehydrogenases with cysteine tag. These proteins can be effectively immobilized (as pointed out by XPS), and the cysteine tag (either 1 or 2 cysteine moieties at the N terminus of the polypeptide chain) was proven to maintain the enzymatic activity of the dehydrogenase upon grafting. The bioelectrode was applied to electroenzymatic enantioselective reduction of D-fructose to D-sorbitol, as a case study.
- Open Access
- 15 March 2016
- Published by Springer Nature in Microbial Cell Factories
- Vol. 15 (1) , 1-13
Engineering and systems-level analysis of Saccharomyces cerevisiae for production of 3-hydroxypropionic acid via malonyl-CoA reductase-dependent pathway
In the future, oil- and gas-derived polymers may be replaced with bio-based polymers, produced from renewable feedstocks using engineered cell factories. Acrylic acid and acrylic esters with an estimated world annual production of approximately 6 million tons by 2017 can be derived from 3-hydroxypropionic acid (3HP), which can be produced by microbial fermentation. For an economically viable process 3HP must be produced at high titer, rate and yield and preferably at low pH to minimize downstream processing costs. Here we describe the metabolic engineering of baker’s yeast Saccharomyces cerevisiae for biosynthesis of 3HP via a malonyl-CoA reductase (MCR)-dependent pathway. Integration of multiple copies of MCR from Chloroflexus aurantiacus and of phosphorylation-deficient acetyl-CoA carboxylase ACC1 genes into the genome of yeast increased 3HP titer fivefold in comparison with single integration. Furthermore we optimized the supply of acetyl-CoA by overexpressing native pyruvate decarboxylase PDC1, aldehyde dehydrogenase ALD6, and acetyl-CoA synthase from Salmonella enterica SEacs L641P . Finally we engineered the cofactor specificity of the glyceraldehyde-3-phosphate dehydrogenase to increase the intracellular production of NADPH at the expense of NADH and thus improve 3HP production and reduce formation of glycerol as by-product. The final strain produced 9.8 ± 0.4 g L−1 3HP with a yield of 13 % C-mol C-mol−1 glucose after 100 h in carbon-limited fed-batch cultivation at pH 5. The 3HP-producing strain was characterized by 13C metabolic flux analysis and by transcriptome analysis, which revealed some unexpected consequences of the undertaken metabolic engineering strategy, and based on this data, future metabolic engineering directions are proposed. In this study, S. cerevisiae was engineered for high-level production of 3HP by increasing the copy numbers of biosynthetic genes and improving flux towards precursors and redox cofactors. This strain represents a good platform for further optimization of 3HP production and hence an important step towards potential commercial bio-based production of 3HP.
- 15 March 2016
- Published by Springer Nature in Microbial Cell Factories
- Vol. 15 (1) , 1-13
Open AccessEngineering and systems-level analysis of Saccharomyces cerevisiae for production of 3-hydroxypropionic acid via malonyl-CoA reductase-dependent pathway
In the future, oil- and gas-derived polymers may be replaced with bio-based polymers, produced from renewable feedstocks using engineered cell factories. Acrylic acid and acrylic esters with an estimated world annual production of approximately 6 million tons by 2017 can be derived from 3-hydroxypropionic acid (3HP), which can be produced by microbial fermentation. For an economically viable process 3HP must be produced at high titer, rate and yield and preferably at low pH to minimize downstream processing costs. Here we describe the metabolic engineering of baker’s yeast Saccharomyces cerevisiae for biosynthesis of 3HP via a malonyl-CoA reductase (MCR)-dependent pathway. Integration of multiple copies of MCR from Chloroflexus aurantiacus and of phosphorylation-deficient acetyl-CoA carboxylase ACC1 genes into the genome of yeast increased 3HP titer fivefold in comparison with single integration. Furthermore we optimized the supply of acetyl-CoA by overexpressing native pyruvate decarboxylase PDC1, aldehyde dehydrogenase ALD6, and acetyl-CoA synthase from Salmonella enterica SEacs L641P . Finally we engineered the cofactor specificity of the glyceraldehyde-3-phosphate dehydrogenase to increase the intracellular production of NADPH at the expense of NADH and thus improve 3HP production and reduce formation of glycerol as by-product. The final strain produced 9.8 ± 0.4 g L−1 3HP with a yield of 13 % C-mol C-mol−1 glucose after 100 h in carbon-limited fed-batch cultivation at pH 5. The 3HP-producing strain was characterized by 13C metabolic flux analysis and by transcriptome analysis, which revealed some unexpected consequences of the undertaken metabolic engineering strategy, and based on this data, future metabolic engineering directions are proposed. In this study, S. cerevisiae was engineered for high-level production of 3HP by increasing the copy numbers of biosynthetic genes and improving flux towards precursors and redox cofactors. This strain represents a good platform for further optimization of 3HP production and hence an important step towards potential commercial bio-based production of 3HP.
- 6 October 2015
- Published by Wiley in Biotechnology Progress
- Vol. 31 (6) , 1657-1668
Combining mechanistic and data‐driven approaches to gain process knowledge on the control of the metabolic shift to lactate uptake in a fed‐batch CHO process
A growing body of knowledge is available on the cellular regulation of overflow metabolism in mammalian hosts of recombinant protein production. However, to develop strategies to control the regulation of overflow metabolism in cell culture processes, the effect of process parameters on metabolism has to be well understood. In this study, we investigated the effect of pH and temperature shift timing on lactate metabolism in a fed‐batch Chinese hamster ovary (CHO) process by using a Design of Experiments (DoE) approach. The metabolic switch to lactate consumption was controlled in a broad range by the proper timing of pH and temperature shifts. To extract process knowledge from the large experimental dataset, we proposed a novel methodological concept and demonstrated its usefulness with the analysis of lactate metabolism. Time‐resolved metabolic flux analysis and PLS‐R VIP were combined to assess the correlation of lactate metabolism and the activity of the major intracellular pathways. Whereas the switch to lactate uptake was mainly triggered by the decrease in the glycolytic flux, lactate uptake was correlated to TCA activity in the last days of the cultivation. These metabolic interactions were visualized on simple mechanistic plots to facilitate the interpretation of the results. Taken together, the combination of knowledge‐based mechanistic modeling and data‐driven multivariate analysis delivered valuable insights into the metabolic control of lactate production and has proven to be a powerful tool for the analysis of large metabolic datasets. © 2015 American Institute of Chemical Engineers Biotechnol. Prog. , 31:1657–1668, 2015
- 6 October 2015
- Published by Wiley in Biotechnology Progress
- Vol. 31 (6) , 1657-1668
Combining mechanistic and data‐driven approaches to gain process knowledge on the control of the metabolic shift to lactate uptake in a fed‐batch CHO process
A growing body of knowledge is available on the cellular regulation of overflow metabolism in mammalian hosts of recombinant protein production. However, to develop strategies to control the regulation of overflow metabolism in cell culture processes, the effect of process parameters on metabolism has to be well understood. In this study, we investigated the effect of pH and temperature shift timing on lactate metabolism in a fed‐batch Chinese hamster ovary (CHO) process by using a Design of Experiments (DoE) approach. The metabolic switch to lactate consumption was controlled in a broad range by the proper timing of pH and temperature shifts. To extract process knowledge from the large experimental dataset, we proposed a novel methodological concept and demonstrated its usefulness with the analysis of lactate metabolism. Time‐resolved metabolic flux analysis and PLS‐R VIP were combined to assess the correlation of lactate metabolism and the activity of the major intracellular pathways. Whereas the switch to lactate uptake was mainly triggered by the decrease in the glycolytic flux, lactate uptake was correlated to TCA activity in the last days of the cultivation. These metabolic interactions were visualized on simple mechanistic plots to facilitate the interpretation of the results. Taken together, the combination of knowledge‐based mechanistic modeling and data‐driven multivariate analysis delivered valuable insights into the metabolic control of lactate production and has proven to be a powerful tool for the analysis of large metabolic datasets. © 2015 American Institute of Chemical Engineers Biotechnol. Prog. , 31:1657–1668, 2015