Qianjun Xu

Interfaces of cementitious layers have widely existed in construction projects, and they are the weakest part of the whole building. In this article, laser scanning and ultrasonic pulse, splitting tensile, and semi-disc fracture tests were carried out to study the bonding performance of cementitious layers. Different performance metrics, such as splitting tensile bond strength, ultrasonic pulse velocity, and attenuation of first arrival, were used to evaluate the bonding characteristics of the concrete layers. The results revealed that the parameters of the interface curve decreased, and the mechanical properties of the interface became weaker with an increase of the interval time. The amplitude of the first wave was more sensitive to the presence of the interface than the ultrasonic pulse velocity. Finally, the relationships between the performance metrics were analyzed. The fracture toughness of model I and mode II was highly correlated with the parameters of the micromorphology of the layered concrete, and the correlation coefficient is not less than 0.9511. The fracture toughness of mode I was strongly related to the splitting tensile strength, with a correlation coefficient of not less than 0.9744. This study was useful for the future study of the mode I and I fracture performance, the morphology, and other physical properties of cementitious layers.

This article presents a numerical study for the analysis of the moisture-thermal and mechanical behavior of concrete subjected to elevated temperatures. Firstly, the moisture-thermal coupled model, is proposed to better describe the strong coupling between heat and moisture transfer. Secondly, based on the mechanics of partially saturated porous media, a nonlinear elastic damage constitutive model is formulated. The simulation results of the coupled moisture-thermal model at each time step were adopted to simulate the distributions of porous behavior, thermo-chemical damage, and moisture damage within concrete under the corresponding moisture-thermal conditions. Consequently, the evolution of the mechanical properties of concrete at elevated temperatures during the entire drying process could be simulated. Finally, an application concerning drying of concrete samples at elevated temperatures was presented. The results obtained show that the proposed moisture-thermal-mechanical model has potential capacity in numerically modeling the complex coupling process of concrete structures under elevated temperatures.

Non-destructive testing (NDT) methods are an important means to detect and assess rock damage. To better understand the accuracy of NDT methods for measuring damage in sandstone, this study compared three NDT methods, including ultrasonic testing, electrical impedance spectroscopy (EIS) testing, computed tomography (CT) scan testing, and a destructive test method, elastic modulus testing. Sandstone specimens were subjected to different levels of damage through cyclic loading and different damage variables derived from five different measured parameters—longitudinal wave (P-wave) velocity, first wave amplitude attenuation, resistivity, effective bearing area and the elastic modulus—were compared. The results show that the NDT methods all reflect the damage levels for sandstone accurately. The damage variable derived from the P-wave velocity is more consistent with the other damage variables, and the amplitude attenuation is more sensitive to damage. The damage variable derived from the effective bearing area is smaller than that derived from the other NDT measurement parameters. Resistivity provides a more stable measure of damage, and damage derived from the acoustic parameters is less stable. By developing P-wave velocity-to-resistivity models based on theoretical and empirical relationships, it was found that differences between these two damage parameters can be explained by differences between the mechanisms through which they respond to porosity, since the resistivity reflect pore structure, while the P-wave velocity reflects the extent of the continuous medium within the sandstone.

The widely used approach of mesoscale finite element modeling for permeability analysis is to simulate the matrix and cracks with continuum elements (CE), whereas this process brings technical difficulties in generating a satisfying mesh conformity at the interface. In this work, an alternative method based on embedded element (EE) technique is developed for the prediction of water pressure field and effective permeability in the numerical simulation. Based on the mathematical similarity between elasticity and seepage problems, water pressure can derive from the corresponding displacement through “elastic analogy.” To assess the capability of the EE technique, different cases are simulated and compared with the CE model. The results show that there is a satisfactory agreement in water pressures and velocities between the CE and EE modeling. In the CE model, different factors, such as permeability contrast between matrix and cracks (K_crack/K_matrix) and mesh size, are considered. It is obvious to find that results will become stable when K_crack/K_matrix reaches 10⁴, and the mesh size has little impact. The effective permeability of 3D porous media with random cracks is evaluated and the results show that the differential method is accurate for 3D permeability analysis when the crack density is not large.

The fluctuations of reservoir water levels significantly change the hydrogeological conditions of reservoir banks and thus affect the steady state of the bank slope. Reservoir landslide stability is governed by the complex interactions between the rock and the water (both reservoir and pore water). This paper establishes the constitutive coupled model of seepage and stress field for the E20 bank slope in the Haizhou Open Pit Coal Mine hydropower station’s lower reservoir. Using the geotechnical engineering three-dimensional fast Lagrangian analysis of continua (FLAC-3D 4.0) program as a computational analysis tool, the E20 bank slope deformation mechanism was analyzed. The simulation model, calculated by using the Boit consolidation and pore-water continuity principles, was built using FEMs. The numerical simulation results showed that cyclical fluctuations and speeds of the reservoir’s water level affect its bank slope stability. When the water level drops at a speed of 12 m/day, the simulation...