David M. Benton
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
David M. Benton has a total of 114 co-authors. Here are the top co-authors by number of shared publications:
- Andrew D. Ellis
Aston University
9 shared publications - Yiming Li
Aston University
9 shared publications Mohammed Patel
Aston University
7 shared publications- Zhouyi Hu
Beijing Jiaotong University
5 shared publications G. Tungate
University of Birmingham
4 shared publicationsJ. A. R. Griffith
University of Birmingham
4 shared publications
Latest Publications
- 10 November 2026
- Published by SPIE-Intl Soc Optical Eng
Wavelength independent detection and discrimination of a laser with a sensitivity of 140fW using self-coherence
Wavelength independent detection and discrimination of laser radiation has been performed by detecting the ‘self-coherence’ of an incoming light source using interferometry with photon sensitive detectors. The system successfully discriminates between coherent and incoherent sources. Detection of scattered laser light has been performed across the visible spectrum with no filters, internal or external source comparisons. The ultimate detection sensitivity was shown to be 140fW for a continuous wave (CW) HeNe laser at 632nm. We believe this to be the most sensitive wavelength independent detection of a CW laser so far reported.
- 10 November 2026
- Published by SPIE-Intl Soc Optical Eng
Wavelength independent detection and discrimination of a laser with a sensitivity of 140fW using self-coherence
Wavelength independent detection and discrimination of laser radiation has been performed by detecting the ‘self-coherence’ of an incoming light source using interferometry with photon sensitive detectors. The system successfully discriminates between coherent and incoherent sources. Detection of scattered laser light has been performed across the visible spectrum with no filters, internal or external source comparisons. The ultimate detection sensitivity was shown to be 140fW for a continuous wave (CW) HeNe laser at 632nm. We believe this to be the most sensitive wavelength independent detection of a CW laser so far reported.
- Open Access
- 4 September 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (18) , 38898-38908
System calibration for single-wavelength multi-terabit mode-division multiplexing free-space optical communication systems
In this paper, we propose a optical calibration strategy to support a single-wavelength mode-division multiplexing multiple-input multiple-output free-space optical communication system utilising 6 Hermite-Gaussian modes. To minimise the inter-mode crosstalk, higher-order modes at the receiver were exploited to calibrate the optical setup. The signal distortions were minimised for 80 GBaud signals by employing Volterra pre-distortion. Probabilistically-shaped 256-QAM signals were transmitted to maximise the achievable information rate. As a result, this system obtained a record-high achievable information rate of 4.49 Tbit/s/λ in free-space optical communications.
- 4 September 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (18) , 38898-38908
Open AccessSystem calibration for single-wavelength multi-terabit mode-division multiplexing free-space optical communication systems
In this paper, we propose a optical calibration strategy to support a single-wavelength mode-division multiplexing multiple-input multiple-output free-space optical communication system utilising 6 Hermite-Gaussian modes. To minimise the inter-mode crosstalk, higher-order modes at the receiver were exploited to calibrate the optical setup. The signal distortions were minimised for 80 GBaud signals by employing Volterra pre-distortion. Probabilistically-shaped 256-QAM signals were transmitted to maximise the achievable information rate. As a result, this system obtained a record-high achievable information rate of 4.49 Tbit/s/λ in free-space optical communications.
- 4 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (13) , 6029-6036
Beaconless Auto-Alignment for Single-Wavelength 4.18 Tbit/s Mode-Division Multiplexing Free-Space Optical Communications
Mode-division multiplexing has shown its ability to significantly increase the capacity of free-space optical communications. Accurate alignment of transmitter and receiver is crucial in maintaining performance, because a sub-optimal beam alignment will induce modal crosstalk. Conventionally, a beacon beam is necessary for system alignment due to multiple local maximums in the mode-division multiplexed beam profile. However, the beacon beam introduces excess system complexity, power consumption, and alignment errors. Here we demonstrate a beaconless system with significantly higher alignment accuracy and faster acquisition. Besides improving energy efficiency, the beaconless method also simplifies the implementation and calibration of pointing, acquisition, and tracking systems, enabling a record-high achievable information rate of 4.187 Tbit/s in a single-wavelength free-space optical link.
- 4 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (13) , 6029-6036
Beaconless Auto-Alignment for Single-Wavelength 4.18 Tbit/s Mode-Division Multiplexing Free-Space Optical Communications
Mode-division multiplexing has shown its ability to significantly increase the capacity of free-space optical communications. Accurate alignment of transmitter and receiver is crucial in maintaining performance, because a sub-optimal beam alignment will induce modal crosstalk. Conventionally, a beacon beam is necessary for system alignment due to multiple local maximums in the mode-division multiplexed beam profile. However, the beacon beam introduces excess system complexity, power consumption, and alignment errors. Here we demonstrate a beaconless system with significantly higher alignment accuracy and faster acquisition. Besides improving energy efficiency, the beaconless method also simplifies the implementation and calibration of pointing, acquisition, and tracking systems, enabling a record-high achievable information rate of 4.187 Tbit/s in a single-wavelength free-space optical link.
- Open Access
Spatial Mode Division Multiplexing of Free-Space Optical Communications Using a Pair of Multiplane Light Converters and a Micromirror Array for Turbulence Emulation
Multi-plane light converters (MPLC) are a means of deconstructing a wavefront into constituent modes that are focused at specific spatial locations, and the reverse—that specific inputs result in controlled modal output. We have used a pair of MPLCs with 21 Hermite–Gaussian modes to represent a free-space optical connection. The effects of strong atmospheric turbulence (Cn2 = 10−13 m−2/3) are emulated using a micromirror array producing a time sequence of aberrating frames. The modal crosstalk between transmitter and receiver modes induced by the turbulence is presented by measuring the intensity in receiver channels for the same turbulence. Six receiver modes are used for optical communication channels with a rate of 137 Gbits/s displaying the benefits of single input multiple output (SIMO) operation for overcoming the deleterious effects of turbulence.
Open AccessSpatial Mode Division Multiplexing of Free-Space Optical Communications Using a Pair of Multiplane Light Converters and a Micromirror Array for Turbulence Emulation
Multi-plane light converters (MPLC) are a means of deconstructing a wavefront into constituent modes that are focused at specific spatial locations, and the reverse—that specific inputs result in controlled modal output. We have used a pair of MPLCs with 21 Hermite–Gaussian modes to represent a free-space optical connection. The effects of strong atmospheric turbulence (Cn2 = 10−13 m−2/3) are emulated using a micromirror array producing a time sequence of aberrating frames. The modal crosstalk between transmitter and receiver modes induced by the turbulence is presented by measuring the intensity in receiver channels for the same turbulence. Six receiver modes are used for optical communication channels with a rate of 137 Gbits/s displaying the benefits of single input multiple output (SIMO) operation for overcoming the deleterious effects of turbulence.
- 27 June 2023
- Published by Optica Publishing Group in Optics Letters
- Vol. 48 (13) , 3575-3578
Single-wavelength polarization- and mode-division multiplexing free-space optical communication at 689 Gbit/s in strong turbulent channels
We experimentally demonstrated, for, it is believed, the first time, high-capacity polarization- and mode-division multiplexing free-space optical transmission with adequate strong turbulence resiliency. A compact spatial light modulator–based polarization multiplexing multi-plane light conversion module was employed to emulate strong turbulent links. By employing advanced successive interference cancellation multiple-input multiple-output decoder and redundant receive channels, the strong turbulence resiliency was significantly improved in a mode-division multiplexing system. As a result, we achieved a record-high line rate of 689.2 Gbit/s, channel number of 10, and net spectral efficiency of 13.9 bit/(s Hz) in a single-wavelength mode-division multiplexing system with strong turbulence.
- 27 June 2023
- Published by Optica Publishing Group in Optics Letters
- Vol. 48 (13) , 3575-3578
Single-wavelength polarization- and mode-division multiplexing free-space optical communication at 689 Gbit/s in strong turbulent channels
We experimentally demonstrated, for, it is believed, the first time, high-capacity polarization- and mode-division multiplexing free-space optical transmission with adequate strong turbulence resiliency. A compact spatial light modulator–based polarization multiplexing multi-plane light conversion module was employed to emulate strong turbulent links. By employing advanced successive interference cancellation multiple-input multiple-output decoder and redundant receive channels, the strong turbulence resiliency was significantly improved in a mode-division multiplexing system. As a result, we achieved a record-high line rate of 689.2 Gbit/s, channel number of 10, and net spectral efficiency of 13.9 bit/(s Hz) in a single-wavelength mode-division multiplexing system with strong turbulence.
- Open Access
- 1 June 2023
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 62 (06) , 064101-14
Laser beam wavelength determination algorithm using a digital micromirror device
An approach for wavelength characterization whereby dynamic Fresnel zone plate (FZP) patterns are written to a digital micromirror device (DMD) and used to focus incoming light onto a camera is proposed. The incoming wavelength is then assessed by scanning the focal length. Rectangular basis Zernike modes are implemented to match the rectangular geometry of the DMD, we believe for the first time. A procedure is developed to correct for inherent aberrations of the optical system by adjusting the Zernike mode amplitudes, thus improving focal spot quality. The aberration corrected FZPs are used to assess the focusing conditions needed for four lasers of different visible wavelengths ranging from blue (405 nm) to near infrared (760 nm). The system is able to produce focused beams with a width of twice the diffraction limit and achieve a wavelength resolution of 3 nm. The operational wavelength of the system is ultimately limited by the spectral bandwidth of the detector.
- 1 June 2023
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 62 (06) , 064101-14
Open AccessLaser beam wavelength determination algorithm using a digital micromirror device
An approach for wavelength characterization whereby dynamic Fresnel zone plate (FZP) patterns are written to a digital micromirror device (DMD) and used to focus incoming light onto a camera is proposed. The incoming wavelength is then assessed by scanning the focal length. Rectangular basis Zernike modes are implemented to match the rectangular geometry of the DMD, we believe for the first time. A procedure is developed to correct for inherent aberrations of the optical system by adjusting the Zernike mode amplitudes, thus improving focal spot quality. The aberration corrected FZPs are used to assess the focusing conditions needed for four lasers of different visible wavelengths ranging from blue (405 nm) to near infrared (760 nm). The system is able to produce focused beams with a width of twice the diffraction limit and achieve a wavelength resolution of 3 nm. The operational wavelength of the system is ultimately limited by the spectral bandwidth of the detector.
- 3 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (11) , 3397-3406
Adaptive Transceiver Design for High-Capacity Multi-Modal Free-Space Optical Communications With Commercial Devices and Atmospheric Turbulence
In this paper, to achieve higher robustness against atmospheric turbulence for high-capacity free-space optical (FSO) communications, an adaptive multi-modal FSO transceiver has been designed and experimentally demonstrated. We show that based on the dynamically estimated channel state information, modulation formats and power for different transmit modes can be adaptively allocated at the transmitter side. Meanwhile, at the receiver side, we show that the most suitable multi-input/multi-output decoder can be selected and employed to meet the requirement of forward error correction at the minimal expense of power consumption. By employing time-division multiplexed transmitter and receiver emulation and a spatial light modulator for turbulence emulation, an aggregate data rate of 590 Gbit/s/wavelength has been achieved when suffering from strong atmospheric turbulence, verifying the feasibility of the proposed adaptive transceiver over a turbulent FSO link. Moreover, to demonstrate practical applicability, all key devices such as transponder, multiplexer, and demultiplexer are commercially available in this work.
- 3 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (11) , 3397-3406
Adaptive Transceiver Design for High-Capacity Multi-Modal Free-Space Optical Communications With Commercial Devices and Atmospheric Turbulence
In this paper, to achieve higher robustness against atmospheric turbulence for high-capacity free-space optical (FSO) communications, an adaptive multi-modal FSO transceiver has been designed and experimentally demonstrated. We show that based on the dynamically estimated channel state information, modulation formats and power for different transmit modes can be adaptively allocated at the transmitter side. Meanwhile, at the receiver side, we show that the most suitable multi-input/multi-output decoder can be selected and employed to meet the requirement of forward error correction at the minimal expense of power consumption. By employing time-division multiplexed transmitter and receiver emulation and a spatial light modulator for turbulence emulation, an aggregate data rate of 590 Gbit/s/wavelength has been achieved when suffering from strong atmospheric turbulence, verifying the feasibility of the proposed adaptive transceiver over a turbulent FSO link. Moreover, to demonstrate practical applicability, all key devices such as transponder, multiplexer, and demultiplexer are commercially available in this work.
- Open Access
- 1 November 2022
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 61 (11) , 114108-13
Temporal and spectral dispersion of an optical source using a micromirror array-based streak camera
The digital micromirror device (DMD) is an array of tilting micromirrors, capable of high frame rates that are made possible by rapid changes of angular state. The rapid angular change of the mirrors is used to sweep an optical signal across a camera sensor, resulting in a version of a streak camera, capable of temporal dispersion of an optical signal. Using a single pixel or single line of pixels can produce a continuous temporal track, whereas a two-dimensional array of mirrors scans an intensity envelope across discrete diffraction orders. Temporal resolutions of 10nS have been achieved and used to measure laser pulse widths. Combining with a diffraction grating oriented orthogonally to the temporal dispersion enables temporal and spectral dispersion to be obtained simultaneously.
- 1 November 2022
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 61 (11) , 114108-13
Open AccessTemporal and spectral dispersion of an optical source using a micromirror array-based streak camera
The digital micromirror device (DMD) is an array of tilting micromirrors, capable of high frame rates that are made possible by rapid changes of angular state. The rapid angular change of the mirrors is used to sweep an optical signal across a camera sensor, resulting in a version of a streak camera, capable of temporal dispersion of an optical signal. Using a single pixel or single line of pixels can produce a continuous temporal track, whereas a two-dimensional array of mirrors scans an intensity envelope across discrete diffraction orders. Temporal resolutions of 10nS have been achieved and used to measure laser pulse widths. Combining with a diffraction grating oriented orthogonally to the temporal dispersion enables temporal and spectral dispersion to be obtained simultaneously.
- Open Access
- 19 October 2022
- Published by IOP Publishing in Engineering Research Express
- Vol. 4 (4) , 045004
Emulating atmospheric turbulence effects on a micro-mirror array: assessing the DMD for use with free-space-to-fibre optical connections
Emulated atmospheric turbulence effects constructed from a set of 22 Zernike modes have been written upon a DMD micromirror array operating as a binary amplitude spatial light modulator. Sequences of aberrated frames with controlled amounts of turbulence have been produced and can be operated at controlled rates that can exceed 1 kHz rates which can be seen in strong turbulence. In this case 400 Hz was chosen and the scintillation levels observed for the same turbulence sequence with single, few and multi-mode fibres at a receiver. Resulting scintillation levels are consistent with standard turbulence models. Increased received intensity and reduced scintillation was observed with larger core fibres and related to aberration-induced focal spot size. Correlation between the received intensity variation and the amplitude variations for individual Zernike modes demonstrates specifically the effect of atmospheric induced beam wander when focusing into a receive fibre. The DMD is thus shown to be able to generate both the necessary frequency content and range of scintillation required for atmospheric emulation.
- 19 October 2022
- Published by IOP Publishing in Engineering Research Express
- Vol. 4 (4) , 045004
Open AccessEmulating atmospheric turbulence effects on a micro-mirror array: assessing the DMD for use with free-space-to-fibre optical connections
Emulated atmospheric turbulence effects constructed from a set of 22 Zernike modes have been written upon a DMD micromirror array operating as a binary amplitude spatial light modulator. Sequences of aberrated frames with controlled amounts of turbulence have been produced and can be operated at controlled rates that can exceed 1 kHz rates which can be seen in strong turbulence. In this case 400 Hz was chosen and the scintillation levels observed for the same turbulence sequence with single, few and multi-mode fibres at a receiver. Resulting scintillation levels are consistent with standard turbulence models. Increased received intensity and reduced scintillation was observed with larger core fibres and related to aberration-induced focal spot size. Correlation between the received intensity variation and the amplitude variations for individual Zernike modes demonstrates specifically the effect of atmospheric induced beam wander when focusing into a receive fibre. The DMD is thus shown to be able to generate both the necessary frequency content and range of scintillation required for atmospheric emulation.
- 30 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 40 (24) , 7769-7778
Enhanced Atmospheric Turbulence Resiliency With Successive Interference Cancellation DSP in Mode Division Multiplexing Free-Space Optical Links
We experimentally demonstrate the enhanced atmospheric turbulence resiliency in a 137.8 Gbit/s/mode mode-division multiplexing free-space optical communication link through the application of a successive interference cancellation digital signal processing algorithm. The turbulence resiliency is further enhanced through redundant receive channels in the mode-division multiplexing link. The proof of concept demonstration is performed using commercially available mode-selective photonic lanterns, a commercial transponder, and a spatial light modulator based turbulence emulator. In this link, 5 spatial modes with each mode carrying 34.46 GBaud dual-polarization quadrature phase shift keying signals are successfully transmitted with an average bit error rate lower than the hard-decision forward error correction limit. As a result, we achieved a record-high mode- and polarization-division multiplexing channel number of 10, a record-high line rate of 689.23 Gbit/s, and a record-high net spectral efficiency of 13.9 b/s/Hz in emulated turbulent links in a mode-division multiplexing free-space optical system.
- 30 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 40 (24) , 7769-7778
Enhanced Atmospheric Turbulence Resiliency With Successive Interference Cancellation DSP in Mode Division Multiplexing Free-Space Optical Links
We experimentally demonstrate the enhanced atmospheric turbulence resiliency in a 137.8 Gbit/s/mode mode-division multiplexing free-space optical communication link through the application of a successive interference cancellation digital signal processing algorithm. The turbulence resiliency is further enhanced through redundant receive channels in the mode-division multiplexing link. The proof of concept demonstration is performed using commercially available mode-selective photonic lanterns, a commercial transponder, and a spatial light modulator based turbulence emulator. In this link, 5 spatial modes with each mode carrying 34.46 GBaud dual-polarization quadrature phase shift keying signals are successfully transmitted with an average bit error rate lower than the hard-decision forward error correction limit. As a result, we achieved a record-high mode- and polarization-division multiplexing channel number of 10, a record-high line rate of 689.23 Gbit/s, and a record-high net spectral efficiency of 13.9 b/s/Hz in emulated turbulent links in a mode-division multiplexing free-space optical system.