Qiwen Zheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qiwen Zheng has a total of 121 co-authors. Here are the top co-authors by number of shared publications:
- Jiangwei Cui
Chinese Academy of Sciences
18 shared publications - Yudong Li
Xinjiang Technical Institute of Physics and Chemistry, Chinese Academy of Sciences
18 shared publications - Qi Guo
Xinjiang Technical Institute of Physics and Chemistry, Chinese Academy of Sciences
17 shared publications Wu Lu
Key Laboratory of Functional Materials and Devices for Special Environments, Xinjiang Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Ürümqi, China
9 shared publicationsXuefeng Yu
Key Laboratory of Functional Materials and Devices for Special Environments, Xinjiang Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Ürümqi, China
9 shared publicationsQi Guo
State Key Laboratory of Functional Materials and Devices for Special Environmental Conditions, Xinjiang Key Laboratory of Extreme Environment Electronics, Xinjiang Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Urumqi, People’s Republic of China
8 shared publications
Latest Publications
- 2 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. PP (00189499) , 1
Effects of Total-Ionizing-Dose Irradiation on Single-Event Upsets for Double-SOI SRAM
The synergistic effects of the total ionizing dose (TID) and single-event upset (SEU) are investigated in a 0.18-μm double silicon-on-insulator (DSOI) static random access memory (SRAM), and the impacts of top silicon-layer thickness (TSOI1) and back-gate bias are discussed. Experimental results show that the TID irradiation significantly enhances the SEU cross-section; specifically, at LET = 86.1 MeV·cm²/mg, a TID of 1000 krad(Si) increases the SEU cross-section by a factor of 2.7. Thanks to reduced charge collection, a 60.7% decrease in SEU cross-section is observed under 181Ta35+ irradiation when TSOI1 is reduced from 65 nm to 45 nm. Moreover, a negative back-gate bias enhances the radiation hardness of the SRAM, achieving a 71% reduction in the SEU cross-section under 181Ta35+ ion exposure following a TID of 1000 krad(Si). Consequently, an optimized biasing scheme is proposed to balance the trade-offs between radiation hardness and key circuit performance metrics, including access time, area, and power consumption. The underlying physical mechanisms are further elucidated through TCAD and HSPICE simulations.
- 2 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. PP (00189499) , 1
Effects of Total-Ionizing-Dose Irradiation on Single-Event Upsets for Double-SOI SRAM
The synergistic effects of the total ionizing dose (TID) and single-event upset (SEU) are investigated in a 0.18-μm double silicon-on-insulator (DSOI) static random access memory (SRAM), and the impacts of top silicon-layer thickness (TSOI1) and back-gate bias are discussed. Experimental results show that the TID irradiation significantly enhances the SEU cross-section; specifically, at LET = 86.1 MeV·cm²/mg, a TID of 1000 krad(Si) increases the SEU cross-section by a factor of 2.7. Thanks to reduced charge collection, a 60.7% decrease in SEU cross-section is observed under 181Ta35+ irradiation when TSOI1 is reduced from 65 nm to 45 nm. Moreover, a negative back-gate bias enhances the radiation hardness of the SRAM, achieving a 71% reduction in the SEU cross-section under 181Ta35+ ion exposure following a TID of 1000 krad(Si). Consequently, an optimized biasing scheme is proposed to balance the trade-offs between radiation hardness and key circuit performance metrics, including access time, area, and power consumption. The underlying physical mechanisms are further elucidated through TCAD and HSPICE simulations.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 73 (2) , 362-371
Radiation Response of H-Gate DSOI nMOSFETs: Channel Size Dependence on TID Degradation
To enable precise application of back-gate biasing for radiation hardening in double silicon-on-insulator (DSOI) technology, it is essential to evaluate the variation in total ionizing dose (TID) response under different channel size conditions. This paper investigates the influence of channel sizes on TID response in H-gate DSOI nMOSFETs. The experimental results indicate that shorter-channel devices exhibit higher TID sensitivity at low-to-medium doses but demonstrate a significant threshold voltage rebound at high doses. Furthermore, under short-channel conditions, increasing the channel width aggravates degradation, resulting in an anomalous radiation-induced wide channel effect. The 3D TCAD simulation is carried out to further analyze the size-dependence phenomena. Simulation results highlight that channel sizes modulate the local electric field distribution within the buried oxide, thereby influencing the density and spatial evolution of radiation-induced trapped charges. Finally, charge extraction via the mid-gap and DCIV techniques confirms the differences in trapped charge density and provides a mechanistic explanation for the rebound effect.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 73 (2) , 362-371
Radiation Response of H-Gate DSOI nMOSFETs: Channel Size Dependence on TID Degradation
To enable precise application of back-gate biasing for radiation hardening in double silicon-on-insulator (DSOI) technology, it is essential to evaluate the variation in total ionizing dose (TID) response under different channel size conditions. This paper investigates the influence of channel sizes on TID response in H-gate DSOI nMOSFETs. The experimental results indicate that shorter-channel devices exhibit higher TID sensitivity at low-to-medium doses but demonstrate a significant threshold voltage rebound at high doses. Furthermore, under short-channel conditions, increasing the channel width aggravates degradation, resulting in an anomalous radiation-induced wide channel effect. The 3D TCAD simulation is carried out to further analyze the size-dependence phenomena. Simulation results highlight that channel sizes modulate the local electric field distribution within the buried oxide, thereby influencing the density and spatial evolution of radiation-induced trapped charges. Finally, charge extraction via the mid-gap and DCIV techniques confirms the differences in trapped charge density and provides a mechanistic explanation for the rebound effect.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (8) , 1-12
TCAD Modeling Methodology for the Simulation of Total Ionizing Dose Effects in Bulk FinFETs
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (8) , 1-12
TCAD Modeling Methodology for the Simulation of Total Ionizing Dose Effects in Bulk FinFETs
- 6 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (12) , 3702-3708
Influence of Substrate Bias on Total Ionizing Dose Degradation of 16-nm n -FinFETs
This work investigates the total ionizing dose (TID) response of 16-nm bulk n-FinFET under different substrate biases after irradiation. Experiments demonstrate that applying a negative substrate bias after irradiation significantly mitigates the TID-induced off-state current (Ioff) and results in a slight positive shift in the threshold voltage (Vth). Technology Computer-Aided Design (TCAD) simulation reveals that the response of these two parameters is attributed to the reduction in electron density under negative substrate bias. We further elucidated the physical mechanism of the disparate response extents exhibited by Vth and Ioff under an identical substrate bias. At low gate voltage conditions, the application of negative substrate bias effectively reduces the electron density in the sub-fin region, resulting in a pronounced reduction of the off-state current. As the gate voltage increases, the peak of the electron density gradually shifts toward the channel. When the gate voltage approaches the threshold voltage, a new parasitic leakage path emerges. Within this path, the electron density remains almost unaffected by the substrate voltage, resulting in an insignificant threshold voltage shift.
- 6 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (12) , 3702-3708
Influence of Substrate Bias on Total Ionizing Dose Degradation of 16-nm n -FinFETs
This work investigates the total ionizing dose (TID) response of 16-nm bulk n-FinFET under different substrate biases after irradiation. Experiments demonstrate that applying a negative substrate bias after irradiation significantly mitigates the TID-induced off-state current (Ioff) and results in a slight positive shift in the threshold voltage (Vth). Technology Computer-Aided Design (TCAD) simulation reveals that the response of these two parameters is attributed to the reduction in electron density under negative substrate bias. We further elucidated the physical mechanism of the disparate response extents exhibited by Vth and Ioff under an identical substrate bias. At low gate voltage conditions, the application of negative substrate bias effectively reduces the electron density in the sub-fin region, resulting in a pronounced reduction of the off-state current. As the gate voltage increases, the peak of the electron density gradually shifts toward the channel. When the gate voltage approaches the threshold voltage, a new parasitic leakage path emerges. Within this path, the electron density remains almost unaffected by the substrate voltage, resulting in an insignificant threshold voltage shift.
- 28 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (10) , 3287-3294
Total Ionizing Dose Effect of CNTFETs and SRAM Cells With Different Bias Conditions
Carbon nanotube (CNT)-based devices and circuits exhibit inherent radiation tolerance, making them promising candidates for harsh environment applications. Examining device characteristics under bias conditions is essential for practical applications. This work investigates total ionizing dose (TID) effects on CNTFET and SRAM performance under various bias conditions. Both transistor IDS-VGS characteristics and SRAM static noise margin (SNM) are evaluated. Experimental results reveal that CNTFET threshold voltage (Vth) shifts strongly depend on irradiation bias conditions. SNM degradation is more severe under biased conditions than under floating conditions. The Vth shifts result from the synergistic effects of bias stress and irradiation, with interface traps and oxide trapped charges in the passivation layer playing dominant roles. Different bias conditions cause varying degrees of transistor degradation within SRAM cells, resulting in SNM variations. Optimizing passivation processes is crucial for mitigating interface traps formation and enhancing device reliability under irradiation, thereby advancing carbon-based circuit applications.
- 28 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (10) , 3287-3294
Total Ionizing Dose Effect of CNTFETs and SRAM Cells With Different Bias Conditions
Carbon nanotube (CNT)-based devices and circuits exhibit inherent radiation tolerance, making them promising candidates for harsh environment applications. Examining device characteristics under bias conditions is essential for practical applications. This work investigates total ionizing dose (TID) effects on CNTFET and SRAM performance under various bias conditions. Both transistor IDS-VGS characteristics and SRAM static noise margin (SNM) are evaluated. Experimental results reveal that CNTFET threshold voltage (Vth) shifts strongly depend on irradiation bias conditions. SNM degradation is more severe under biased conditions than under floating conditions. The Vth shifts result from the synergistic effects of bias stress and irradiation, with interface traps and oxide trapped charges in the passivation layer playing dominant roles. Different bias conditions cause varying degrees of transistor degradation within SRAM cells, resulting in SNM variations. Optimizing passivation processes is crucial for mitigating interface traps formation and enhancing device reliability under irradiation, thereby advancing carbon-based circuit applications.
- 29 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (9) , 4662-4668
Interaction of Total Ionizing Dose Effect and Hot Carrier Degradation in Bulk I/O-FinFETs
In this article, the interaction of total ionizing dose (TID) effect and hot carrier injection (HCI) degradation in bulk I/O-FIN field-effect transistors (FinFETs) is investigated. The results for stress post radiation (SPR) show that the HCI degradation of irradiated devices is greater than that of unirradiated, and the irradiated devices undergo rapid recovery by HCI stress for a very short time. With the increase of stress time, the influence of TID on HCI decreases and the off-state leakage current after irradiation does not recover to the initial value of the device. The electrons injection into the shallow trench isolation (STI) during HCI is suggested as the reason for parameters recovery after irradiation. While the experiment results of radiation post stress (RPS) show that there is no obvious influence of HCI on TID, since there is no electrons injection into STI region during HCI before TID. The irradiation experiment under HCI bias shows that the combination of these two effects causes the change of device characteristics. The mechanism of interaction between TID and HCI is revealed.
- 29 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (9) , 4662-4668
Interaction of Total Ionizing Dose Effect and Hot Carrier Degradation in Bulk I/O-FinFETs
In this article, the interaction of total ionizing dose (TID) effect and hot carrier injection (HCI) degradation in bulk I/O-FIN field-effect transistors (FinFETs) is investigated. The results for stress post radiation (SPR) show that the HCI degradation of irradiated devices is greater than that of unirradiated, and the irradiated devices undergo rapid recovery by HCI stress for a very short time. With the increase of stress time, the influence of TID on HCI decreases and the off-state leakage current after irradiation does not recover to the initial value of the device. The electrons injection into the shallow trench isolation (STI) during HCI is suggested as the reason for parameters recovery after irradiation. While the experiment results of radiation post stress (RPS) show that there is no obvious influence of HCI on TID, since there is no electrons injection into STI region during HCI before TID. The irradiation experiment under HCI bias shows that the combination of these two effects causes the change of device characteristics. The mechanism of interaction between TID and HCI is revealed.
- 26 December 2024
- Published by Taylor & Francis in Radiation Effects and Defects in Solids
- p. 1-10
Impact of gate bias on TID responses of BCD MOSFETs
- 26 December 2024
- Published by Taylor & Francis in Radiation Effects and Defects in Solids
- p. 1-10
Impact of gate bias on TID responses of BCD MOSFETs
- 3 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (10) , 5867-5873
Total Ionizing Dose Effect and Radiation Hardness Analysis on Low-Leakage ESD Devices Fabricated on Double SOI Technology
The impact of the total ionizing dose (TID) on low leakage electrostatic discharge (ESD) protection devices fabricated on the 180-nm double silicon on insulator (DSOI) technology is investigated through experiments and numerical simulations. The devices under tests (DUTs) are MOS-DIO, MOS-SCR, and gate-grounded NMOSFET (GGNMOS). The transmission line pulse (TLP) measurements were carried out before and right after $^{\text{60}}$ Co gamma ray irradiation. The results show that the radiation-induced charges and traps mainly located in the top buried oxide (BOX1) can lead to deterioration of ESD characteristics, such as leakage and triggering voltage. After being irradiated to a dose of 300 krad(Si), the leakage of GGNMOS increases by about three orders of magnitude, and in addition, its snapback characteristic vanishes. Radiation hardness on DSOI-based ESD devices is analyzed based on experiment and simulation results, which implies that the negative voltage on back-gate electrode can mitigate the deterioration of ESD characteristics caused due to irradiation.
- 3 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (10) , 5867-5873
Total Ionizing Dose Effect and Radiation Hardness Analysis on Low-Leakage ESD Devices Fabricated on Double SOI Technology
The impact of the total ionizing dose (TID) on low leakage electrostatic discharge (ESD) protection devices fabricated on the 180-nm double silicon on insulator (DSOI) technology is investigated through experiments and numerical simulations. The devices under tests (DUTs) are MOS-DIO, MOS-SCR, and gate-grounded NMOSFET (GGNMOS). The transmission line pulse (TLP) measurements were carried out before and right after $^{\text{60}}$ Co gamma ray irradiation. The results show that the radiation-induced charges and traps mainly located in the top buried oxide (BOX1) can lead to deterioration of ESD characteristics, such as leakage and triggering voltage. After being irradiated to a dose of 300 krad(Si), the leakage of GGNMOS increases by about three orders of magnitude, and in addition, its snapback characteristic vanishes. Radiation hardness on DSOI-based ESD devices is analyzed based on experiment and simulation results, which implies that the negative voltage on back-gate electrode can mitigate the deterioration of ESD characteristics caused due to irradiation.