Ricardo Garcia-Rosas
Ricardo Garcia-Rosas has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
Ying Tan
5 shared publicationsChris Manzie
4 shared publicationsDenny Oetomo
4 shared publications- Denny Oetomo
Department of Mechanical Engineering, The University of Melbourne, Melbourne, Australia
4 shared publications - Peter F. M. Choong
Department of Surgery, St. Vincents Hospital Melbourne, The University of Melbourne, Fitzroy, VIC, Australia
4 shared publications - Ying Tan
Peking University
4 shared publications
Latest Publications
- 7 January 2025
- Published by Wolters Kluwer Health in Prosthetics and Orthotics International
- Vol. 49 (4) , 408-415
Feasibility study of a game-based virtual reality intervention for functional prosthesis use training: A preclinical assessment
Objective: This paper presents a preclinical feasibility study to investigate the efficacy of a game-based virtual reality (VR) intervention in the functional training of upper-limb prosthesis use. Methods: The study compared the skill of 2 able-bodied groups (intervention and control, 5 participants in each group) using a surface electromyography controlled self-experience prosthetic hand and wrist through the Box and Blocks Test (BBT). The Intervention Group followed the game-based VR intervention for 4 weeks and underwent real-life (RL) BBT assessments before and after the intervention using the self-experience prosthesis. The Control Group performed the RL BBT assessments 4 weeks apart with no VR intervention in between. As a follow-on study, the Control Group then underwent the VR intervention for further validation. The VR intervention consisted of 2 games designed to train the control and use of a surface electromyography–controlled prosthetic hand and an assessment (VR BBT). The VR intervention protocol included three 30-minute sessions per week over a period of 4 weeks. Results: A significantly larger improvement was shown in the BBT scores from the Intervention Group (mean 6.375) compared to the Control Group (1.5). The follow-on study further confirmed the result. Conclusion: The study demonstrated promising outcomes in the use of a game-based VR intervention for training functional prosthesis use, with participants showing significant improvements in prosthesis use skills measured with RL BBT. This motivates further development of VR interventions for prosthesis use training and their validation through clinical trials.
- 7 January 2025
- Published by Wolters Kluwer Health in Prosthetics and Orthotics International
- Vol. 49 (4) , 408-415
Feasibility study of a game-based virtual reality intervention for functional prosthesis use training: A preclinical assessment
Objective: This paper presents a preclinical feasibility study to investigate the efficacy of a game-based virtual reality (VR) intervention in the functional training of upper-limb prosthesis use. Methods: The study compared the skill of 2 able-bodied groups (intervention and control, 5 participants in each group) using a surface electromyography controlled self-experience prosthetic hand and wrist through the Box and Blocks Test (BBT). The Intervention Group followed the game-based VR intervention for 4 weeks and underwent real-life (RL) BBT assessments before and after the intervention using the self-experience prosthesis. The Control Group performed the RL BBT assessments 4 weeks apart with no VR intervention in between. As a follow-on study, the Control Group then underwent the VR intervention for further validation. The VR intervention consisted of 2 games designed to train the control and use of a surface electromyography–controlled prosthetic hand and an assessment (VR BBT). The VR intervention protocol included three 30-minute sessions per week over a period of 4 weeks. Results: A significantly larger improvement was shown in the BBT scores from the Intervention Group (mean 6.375) compared to the Control Group (1.5). The follow-on study further confirmed the result. Conclusion: The study demonstrated promising outcomes in the use of a game-based VR intervention for training functional prosthesis use, with participants showing significant improvements in prosthesis use skills measured with RL BBT. This motivates further development of VR interventions for prosthesis use training and their validation through clinical trials.
- 23 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (2) , 1973-1980
Exploiting Inherent Human Motor Behaviour in the Online Personalisation of Human-Prosthetic Interfaces
Human-prosthetic interfaces require their settings to be tuned to individual users. This can potentially be done autonomously while the prosthesis user performs a task by using online personalisation algorithms. These online personalisation algorithms adjust the interface parameters to optimise a given measure of performance. For convergence to be reached, both the human and the personalisation algorithm need to optimise towards the same objective. To date, task-oriented measures of performance have been utilised as the objective, requiring explicit feedback of the measure of performance to the prosthesis user, which is not practical. In this letter, the use of inherent human motor behaviour as the measure of performance for online personalisation algorithms is proposed and investigated. This allows the personalisation procedure to occur without the prosthesis user needing explicit knowledge of the measure of performance. The methodology for formulating inherent human motor behaviour within the framework of online personalisation of human-prosthetic interfaces is presented and validated through an experiment with nine able-bodied subjects. Experimental results demonstrate the efficacy of inherent human motor behaviour-based measures of performance in the design of an intuitive human-prosthetic interface specifically, applicable to human-robot interaction in general.
- 23 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (2) , 1973-1980
Exploiting Inherent Human Motor Behaviour in the Online Personalisation of Human-Prosthetic Interfaces
Human-prosthetic interfaces require their settings to be tuned to individual users. This can potentially be done autonomously while the prosthesis user performs a task by using online personalisation algorithms. These online personalisation algorithms adjust the interface parameters to optimise a given measure of performance. For convergence to be reached, both the human and the personalisation algorithm need to optimise towards the same objective. To date, task-oriented measures of performance have been utilised as the objective, requiring explicit feedback of the measure of performance to the prosthesis user, which is not practical. In this letter, the use of inherent human motor behaviour as the measure of performance for online personalisation algorithms is proposed and investigated. This allows the personalisation procedure to occur without the prosthesis user needing explicit knowledge of the measure of performance. The methodology for formulating inherent human motor behaviour within the framework of online personalisation of human-prosthetic interfaces is presented and validated through an experiment with nine able-bodied subjects. Experimental results demonstrate the efficacy of inherent human motor behaviour-based measures of performance in the design of an intuitive human-prosthetic interface specifically, applicable to human-robot interaction in general.
- 5 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Neural Systems and Rehabilitation Engineering
- Vol. 28 (12) , 2966-2977
Task-Space Synergies for Reaching Using Upper-Limb Prostheses
Synergistic prostheses enable the coordinated movement of the human-prosthetic arm, as required by activities of daily living. This is achieved by coupling the motion of the prosthesis to the human command, such as the residual limb movement in motion-based interfaces. Previous studies demonstrated that developing human-prosthetic synergies in joint-space must consider individual motor behaviour and the intended task to be performed, requiring personalisation and task calibration. In this work, an alternative synergy-based strategy, utilising a synergistic relationship expressed in task-space, is proposed. This task-space synergy has the potential to replace the need for personalisation and task calibration with a model-based approach requiring knowledge of the individual user’s arm kinematics, the anticipated hand motion during the task and voluntary information from the prosthetic user. The proposed method is compared with surface electromyography-based and joint-space synergy-based prosthetic interfaces in a study of motor behaviour and task performance on able-bodied subjects using a VR-based transhumeral prosthesis. Experimental results showed that for a set of forward reaching tasks the proposed task-space synergy achieves comparable performance to joint-space synergies without the need to rely on time-consuming calibration processes or human motor learning. Case study results with an amputee subject motivate the further development of the proposed task-space synergy method.
- 5 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Neural Systems and Rehabilitation Engineering
- Vol. 28 (12) , 2966-2977
Task-Space Synergies for Reaching Using Upper-Limb Prostheses
Synergistic prostheses enable the coordinated movement of the human-prosthetic arm, as required by activities of daily living. This is achieved by coupling the motion of the prosthesis to the human command, such as the residual limb movement in motion-based interfaces. Previous studies demonstrated that developing human-prosthetic synergies in joint-space must consider individual motor behaviour and the intended task to be performed, requiring personalisation and task calibration. In this work, an alternative synergy-based strategy, utilising a synergistic relationship expressed in task-space, is proposed. This task-space synergy has the potential to replace the need for personalisation and task calibration with a model-based approach requiring knowledge of the individual user’s arm kinematics, the anticipated hand motion during the task and voluntary information from the prosthetic user. The proposed method is compared with surface electromyography-based and joint-space synergy-based prosthetic interfaces in a study of motor behaviour and task performance on able-bodied subjects using a VR-based transhumeral prosthesis. Experimental results showed that for a set of forward reaching tasks the proposed task-space synergy achieves comparable performance to joint-space synergies without the need to rely on time-consuming calibration processes or human motor learning. Case study results with an amputee subject motivate the further development of the proposed task-space synergy method.
- Open Access
Task-space Synergies for Reaching using Upper-limb Prostheses
Synergistic prostheses enable the coordinated movement of the human-prosthetic arm, as required by activities of daily living. This is achieved by coupling the motion of the prosthesis to the human command, such as the residual limb movement in motion-based interfaces. Previous studies demonstrated that developing human-prosthetic synergies in joint-space must consider individual motor behaviour and the intended task to be performed, requiring personalisation and task calibration. In this work, an alternative synergy-based strategy, utilising a synergistic relationship expressed in task-space, is proposed. This task-space synergy has the potential to replace the need for personalisation and task calibration with a model-based approach requiring knowledge of the individual user's arm kinematics, the anticipated hand motion during the task and voluntary information from the prosthetic user. The proposed method is compared with surface electromyography-based and joint-space synergy-based prosthetic interfaces in a study of motor behaviour and task performance on able-bodied subjects using a VR-based transhumeral prosthesis. Experimental results showed that for a set of forward reaching tasks the proposed task-space synergy achieves comparable performance to joint-space synergies without the need to rely on time-consuming calibration processes or human motor learning. Case study results with an amputee subject motivate the further development of the proposed task-space synergy method.
Open AccessTask-space Synergies for Reaching using Upper-limb Prostheses
Synergistic prostheses enable the coordinated movement of the human-prosthetic arm, as required by activities of daily living. This is achieved by coupling the motion of the prosthesis to the human command, such as the residual limb movement in motion-based interfaces. Previous studies demonstrated that developing human-prosthetic synergies in joint-space must consider individual motor behaviour and the intended task to be performed, requiring personalisation and task calibration. In this work, an alternative synergy-based strategy, utilising a synergistic relationship expressed in task-space, is proposed. This task-space synergy has the potential to replace the need for personalisation and task calibration with a model-based approach requiring knowledge of the individual user's arm kinematics, the anticipated hand motion during the task and voluntary information from the prosthetic user. The proposed method is compared with surface electromyography-based and joint-space synergy-based prosthetic interfaces in a study of motor behaviour and task performance on able-bodied subjects using a VR-based transhumeral prosthesis. Experimental results showed that for a set of forward reaching tasks the proposed task-space synergy achieves comparable performance to joint-space synergies without the need to rely on time-consuming calibration processes or human motor learning. Case study results with an amputee subject motivate the further development of the proposed task-space synergy method.
- Open Access
Personalized On-line Adaptation of Kinematic Synergies for Human-Prosthesis Interfaces
Synergies have been adopted in prosthetic limb applications to reduce complexity of design, but typically involve a single synergy setting for a population and ignore individual preference or adaptation capacity. However, personalization of the synergy setting is necessary for the effective operation of the prosthetic device. Two major challenges hinder the personalization of synergies in human-prosthesis interfaces. The first is related to the process of human motor adaptation and the second to the variation in motor learning dynamics of individuals. In this paper, a systematic personalization of kinematic synergies for human-prosthesis interfaces using on-line measurements from each individual is proposed. The task of reaching using the upper-limb is described by an objective function and the interface is parameterized by a kinematic synergy. Consequently, personalizing the interface for a given individual can be formulated as finding an optimal personalized parameter. A structure to model the observed motor behavior that allows for the personalized traits of motor preference and motor learning is proposed, and subsequently used in an on-line optimization scheme to identify the synergies for an individual. The knowledge of the common features contained in the model enables on-line adaptation of the human-prosthesis interface to happen concurrently to human motor adaptation without the need to re-tune the personalization algorithm for each individual. Human-in-the-loop experimental results with able-bodied subjects, performed in a virtual reality environment to emulate amputation and prosthesis use, show that the proposed personalization algorithm was effective in obtaining optimal synergies with a fast uniform convergence speed across a group of individuals.
Open AccessPersonalized On-line Adaptation of Kinematic Synergies for Human-Prosthesis Interfaces
Synergies have been adopted in prosthetic limb applications to reduce complexity of design, but typically involve a single synergy setting for a population and ignore individual preference or adaptation capacity. However, personalization of the synergy setting is necessary for the effective operation of the prosthetic device. Two major challenges hinder the personalization of synergies in human-prosthesis interfaces. The first is related to the process of human motor adaptation and the second to the variation in motor learning dynamics of individuals. In this paper, a systematic personalization of kinematic synergies for human-prosthesis interfaces using on-line measurements from each individual is proposed. The task of reaching using the upper-limb is described by an objective function and the interface is parameterized by a kinematic synergy. Consequently, personalizing the interface for a given individual can be formulated as finding an optimal personalized parameter. A structure to model the observed motor behavior that allows for the personalized traits of motor preference and motor learning is proposed, and subsequently used in an on-line optimization scheme to identify the synergies for an individual. The knowledge of the common features contained in the model enables on-line adaptation of the human-prosthesis interface to happen concurrently to human motor adaptation without the need to re-tune the personalization algorithm for each individual. Human-in-the-loop experimental results with able-bodied subjects, performed in a virtual reality environment to emulate amputation and prosthesis use, show that the proposed personalization algorithm was effective in obtaining optimal synergies with a fast uniform convergence speed across a group of individuals.
- 17 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cybernetics
- Vol. 51 (2) , 1070-1084
Personalized Online Adaptation of Kinematic Synergies for Human-Prosthesis Interfaces
Synergies have been adopted in prosthetic limb applications to reduce the complexity of design, but typically involve a single synergy setting for a population and ignore individual preference or adaptation capacity. However, personalization of the synergy setting is necessary for the effective operation of the prosthetic device. Two major challenges hinder the personalization of synergies in human-prosthesis interfaces (HPIs). The first is related to the process of human motor adaptation and the second to the variation in motor learning dynamics of individuals. In this paper, a systematic personalization of kinematic synergies for HPIs using online measurements from each individual is proposed. The task of reaching using the upper limb is described by an objective function and the interface is parameterized by a kinematic synergy. Consequently, personalizing the interface for a given individual can be formulated as finding an optimal personalized parameter. A structure to model the observed motor behavior that allows for the personalized traits of motor preference and motor learning is proposed, and subsequently used in an online optimization scheme to identify the synergies for an individual. The knowledge of the common features contained in the model enables online adaptation of the HPI to happen concurrently to human motor adaptation without the need to retune the personalization algorithm for each individual. Human-in-the-loop experimental results with able-bodied subjects, performed in a virtual reality environment to emulate amputation and prosthesis use, show that the proposed personalization algorithm was effective in obtaining optimal synergies with a fast uniform convergence speed across a group of individuals.
- 17 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cybernetics
- Vol. 51 (2) , 1070-1084
Personalized Online Adaptation of Kinematic Synergies for Human-Prosthesis Interfaces
Synergies have been adopted in prosthetic limb applications to reduce the complexity of design, but typically involve a single synergy setting for a population and ignore individual preference or adaptation capacity. However, personalization of the synergy setting is necessary for the effective operation of the prosthetic device. Two major challenges hinder the personalization of synergies in human-prosthesis interfaces (HPIs). The first is related to the process of human motor adaptation and the second to the variation in motor learning dynamics of individuals. In this paper, a systematic personalization of kinematic synergies for HPIs using online measurements from each individual is proposed. The task of reaching using the upper limb is described by an objective function and the interface is parameterized by a kinematic synergy. Consequently, personalizing the interface for a given individual can be formulated as finding an optimal personalized parameter. A structure to model the observed motor behavior that allows for the personalized traits of motor preference and motor learning is proposed, and subsequently used in an online optimization scheme to identify the synergies for an individual. The knowledge of the common features contained in the model enables online adaptation of the HPI to happen concurrently to human motor adaptation without the need to retune the personalization algorithm for each individual. Human-in-the-loop experimental results with able-bodied subjects, performed in a virtual reality environment to emulate amputation and prosthesis use, show that the proposed personalization algorithm was effective in obtaining optimal synergies with a fast uniform convergence speed across a group of individuals.
- 1 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2018, 3194-3197
On the Relationship Between Human Motor Control Performance and Kinematic Synergies in Upper Limb Prosthetics
Current prosthesis command interfaces only allow for a single degree of freedom to be commanded at a time, making coordinated motion difficult to achieve. Thus it becomes crucial to develop methods that complement these interfaces to allow for intuitive coordinated arm motion. Kinematic synergies have been shown as an alternate method where the motion of the prosthetic device is coordinated with that of the residual limb. In this paper, the mapping between the parameters of a kinematic synergy model and a measure of task performance is established experimentally in order to test the applicability of online optimization methods for the identification of synergies. To achieve this, a cost function that captures the objective of the reaching task and a linear kinematic synergy model were chosen. A human experiment was developed in a Virtual Reality (VR) platform in order to determine the synergy-performance relationship. The experiments were performed on 10 able-bodied subjects. The relationship observed between the synergy parameter and the reaching task cost function suggests existing online optimization methods may be applicable.
- 1 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2018, 3194-3197
On the Relationship Between Human Motor Control Performance and Kinematic Synergies in Upper Limb Prosthetics
Current prosthesis command interfaces only allow for a single degree of freedom to be commanded at a time, making coordinated motion difficult to achieve. Thus it becomes crucial to develop methods that complement these interfaces to allow for intuitive coordinated arm motion. Kinematic synergies have been shown as an alternate method where the motion of the prosthetic device is coordinated with that of the residual limb. In this paper, the mapping between the parameters of a kinematic synergy model and a measure of task performance is established experimentally in order to test the applicability of online optimization methods for the identification of synergies. To achieve this, a cost function that captures the objective of the reaching task and a linear kinematic synergy model were chosen. A human experiment was developed in a Virtual Reality (VR) platform in order to determine the synergy-performance relationship. The experiments were performed on 10 able-bodied subjects. The relationship observed between the synergy parameter and the reaching task cost function suggests existing online optimization methods may be applicable.
- 1 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 21-26
Nonlinear observer based control design for an under-actuated compliant robotic hand
This work aims at designing control algorithms for an under-actuated compliant adaptive prosthetic hand to perform a complex task of grasping and manipulating of an unknown object. As multiple objectives are considered, if one controller is designed for one control objective, a hybrid controller is needed to coordinate different controllers to perform complex tasks. This work thus tries to apply recently developed framework of System of Funnels to the underactuated compliant adaptive prosthetic hand to design this hybrid controller. In order to apply System of Funnels, each controller has to have the flexibility to obtain any given domain of attraction by tuning its parameters. This paper proposed nonlinear observer based PID controllers for Grasp Approach and Grasp Stabilization. The nonlinear observer estimates the needed velocity of the under-actuated compliant adaptive prosthetic hand. By tuning parameters of PID controller and nonlinear observers appropriately, any desired domain of attraction for each control objective can be achieved. Our next step is to design some manipulation controller with adjustable domain of attraction in order to apply the framework of System of Funnels.
- 1 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 21-26
Nonlinear observer based control design for an under-actuated compliant robotic hand
This work aims at designing control algorithms for an under-actuated compliant adaptive prosthetic hand to perform a complex task of grasping and manipulating of an unknown object. As multiple objectives are considered, if one controller is designed for one control objective, a hybrid controller is needed to coordinate different controllers to perform complex tasks. This work thus tries to apply recently developed framework of System of Funnels to the underactuated compliant adaptive prosthetic hand to design this hybrid controller. In order to apply System of Funnels, each controller has to have the flexibility to obtain any given domain of attraction by tuning its parameters. This paper proposed nonlinear observer based PID controllers for Grasp Approach and Grasp Stabilization. The nonlinear observer estimates the needed velocity of the under-actuated compliant adaptive prosthetic hand. By tuning parameters of PID controller and nonlinear observers appropriately, any desired domain of attraction for each control objective can be achieved. Our next step is to design some manipulation controller with adjustable domain of attraction in order to apply the framework of System of Funnels.