Jiaojing Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jiaojing Zhang has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Hua Song
College of Chemistry & Chemical Engineering, Northeast Petroleum University, Daqing 163318, P.R. China
2 shared publications Tianzhen Hao
Hebei Jingzhi Technology Company Ltd., Cangzhou 061000, China
2 shared publicationsXueqin Wang
Provincial Key Laboratory of Oil & Gas Chemical Technology, College of Chemistry & Chemical Engineering, Northeast Petroleum University, Daqing, 163318, China
2 shared publicationsYanguang Chen
Provincial Key Laboratory of Oil & Gas Chemical Technology, College of Chemistry & Chemical Engineering, Northeast Petroleum University, Daqing 163318, China
2 shared publications- Bolong Jiang
College of Chemistry and Chemical Engineering, Northeast Petroleum University, Daqing 163318, Heilongjiang, China
1 shared publication Dandan Yuan
Provincial Key Laboratory of Oil & Gas Chemical Technology, College of Chemistry & Chemical Engineering, Northeast Petroleum University, 163318 Daqing, China
1 shared publication
Latest Publications
- 23 December 2025
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 50 (5) , 2224-2234
Enhanced performance of nickel-doped porous carbon derived from soybean hulls for supercapacitor applications
Bio-based activated carbon and transition metal oxides, as electrode materials, exhibit excellent electrochemical performance and have broad prospects for application in supercapacitor devices.
- 23 December 2025
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 50 (5) , 2224-2234
Enhanced performance of nickel-doped porous carbon derived from soybean hulls for supercapacitor applications
Bio-based activated carbon and transition metal oxides, as electrode materials, exhibit excellent electrochemical performance and have broad prospects for application in supercapacitor devices.
- 1 April 2023
- Published by Bentham Science Publishers Ltd. in Recent Innovations in Chemical Engineering
- Vol. 16 (2) , 88-98
Preparation and Characterization of Cu(NO3)2 Modified Activated Carbon Adsorbents and Influencing Factors of H2S Adsorption
Background: With the constant development and growth of the world’s economy, the demand for energy continues to rise. However, rising oil prices, increasing carbon emissions, and energy shortages will limit economic development and affect living standards. Therefore, further exploitation and utilization of natural gas are of great significance for the sustainable development of national economies and the improvement of civil life. Objective: Natural gas contains acidic gas, such as hydrogen sulfide (H2S), and can lead to physical safety issues, environmental pollution, equipment corrosion, and catalyst poisoning. Therefore, a desulfurization process, which has practical significance, must be carried out to reduce the H2S content to less than 20 mg•m−3. Methods: Currently, the main desulfurization processes involve dry and wet desulfurization methods. The wet desulfurization methods include physical, chemical, and physico-chemical solvent methods, which have a large processing capacity and involve a continuous operation sequence applied to the purification of natural gas containing a high sulfur content. The dry desulfurization methods, which use a solid as the desulfurizer, have high precision, easy operation, and low energy consumption. This method has been widely applied to advanced treatment. : Activated carbon, which has a large surface area, large pore volume, and complex porous structure, is widely used as an adsorbent for desulfurization. When compared with other adsorbents, activated carbon has several advantages, such as a high adsorption capacity and low cost. The H2S removal performance of the adsorbent can be significantly improved after modification. In this study, using a low concentration of H2S and nitrogen to simulate raw fuel gas, cupric nitrate-modified activated carbon was used as the main adsorbent for desulfurization. The effect of the preparation conditions on the H2S removal performance was studied, and the adsorbents were characterized using a series of methods. Results: In this study, a low concentration of H2S and nitrogen were used to simulate raw fuel gas, and cupric nitrate-modified activated carbon was used as an adsorbent. The results from structural analysis indicated a significant change in the surface structure of AC by introducing Cu(NO3)2. Cu(NO3)2 promoted the transformation of micropores into mesopores or macropores and active substances into the pores of AC for desulfurization. The effects of the preparation conditions on the H2S removal performance were studied using a fixed-bed adsorption column. The best preparation conditions for the Cu(NO3)2 modified activated carbon adsorbent involved: a Cu(NO3)2 impregnation concentration of 5%, impregnation time of 24 h, calcination temperature of 300 °C, and calcination time of 2 h. The H2S saturation capacity and desulfurization rate reached 55.4 mg·g−1 and 98.92%, respectively. The H2S saturation capacity was improved by 38.2 mg·g−1 compared with unmodified activated carbon. Conclusion: In this study, a low concentration of H2S and nitrogen were used to simulate raw fuel gas, and cupric nitrate-modified activated carbon was used as an adsorbent. The experimental results showed that the H2S removal performance of the adsorbent was significantly improved using Cu(NO3)2 impregnated activated carbon.
- 1 April 2023
- Published by Bentham Science Publishers Ltd. in Recent Innovations in Chemical Engineering
- Vol. 16 (2) , 88-98
Preparation and Characterization of Cu(NO3)2 Modified Activated Carbon Adsorbents and Influencing Factors of H2S Adsorption
Background: With the constant development and growth of the world’s economy, the demand for energy continues to rise. However, rising oil prices, increasing carbon emissions, and energy shortages will limit economic development and affect living standards. Therefore, further exploitation and utilization of natural gas are of great significance for the sustainable development of national economies and the improvement of civil life. Objective: Natural gas contains acidic gas, such as hydrogen sulfide (H2S), and can lead to physical safety issues, environmental pollution, equipment corrosion, and catalyst poisoning. Therefore, a desulfurization process, which has practical significance, must be carried out to reduce the H2S content to less than 20 mg•m−3. Methods: Currently, the main desulfurization processes involve dry and wet desulfurization methods. The wet desulfurization methods include physical, chemical, and physico-chemical solvent methods, which have a large processing capacity and involve a continuous operation sequence applied to the purification of natural gas containing a high sulfur content. The dry desulfurization methods, which use a solid as the desulfurizer, have high precision, easy operation, and low energy consumption. This method has been widely applied to advanced treatment. : Activated carbon, which has a large surface area, large pore volume, and complex porous structure, is widely used as an adsorbent for desulfurization. When compared with other adsorbents, activated carbon has several advantages, such as a high adsorption capacity and low cost. The H2S removal performance of the adsorbent can be significantly improved after modification. In this study, using a low concentration of H2S and nitrogen to simulate raw fuel gas, cupric nitrate-modified activated carbon was used as the main adsorbent for desulfurization. The effect of the preparation conditions on the H2S removal performance was studied, and the adsorbents were characterized using a series of methods. Results: In this study, a low concentration of H2S and nitrogen were used to simulate raw fuel gas, and cupric nitrate-modified activated carbon was used as an adsorbent. The results from structural analysis indicated a significant change in the surface structure of AC by introducing Cu(NO3)2. Cu(NO3)2 promoted the transformation of micropores into mesopores or macropores and active substances into the pores of AC for desulfurization. The effects of the preparation conditions on the H2S removal performance were studied using a fixed-bed adsorption column. The best preparation conditions for the Cu(NO3)2 modified activated carbon adsorbent involved: a Cu(NO3)2 impregnation concentration of 5%, impregnation time of 24 h, calcination temperature of 300 °C, and calcination time of 2 h. The H2S saturation capacity and desulfurization rate reached 55.4 mg·g−1 and 98.92%, respectively. The H2S saturation capacity was improved by 38.2 mg·g−1 compared with unmodified activated carbon. Conclusion: In this study, a low concentration of H2S and nitrogen were used to simulate raw fuel gas, and cupric nitrate-modified activated carbon was used as an adsorbent. The experimental results showed that the H2S removal performance of the adsorbent was significantly improved using Cu(NO3)2 impregnated activated carbon.
- 17 February 2022
- Published by Emerald Publishing in Pigment & Resin Technology
- Vol. 52 (4) , 413-421
Highly sensitive electrochemical sensor based on novel Ag Nps/Ppti films for detection of hydrazine
Purpose: A novel semiconducting macromolecule-polyperylene tetraamide (PPTI) was first synthesized with a simple method using 3, 4, 9, 10-perylene tetracarboxylic acid (PTCA) and hydrazine hydrate (N2H4). Design/methodology/approach: The Ag nanoparticle was doped on the surface or inside of the PPTI film to obtain a highly sensitive hydrazine sensor-Ag/PPTI, which was synthesized within one step. The structure of Ag/PPTI was characterized through various techniques such as Fourier transform infrared (FT-IR), thermogravimetric analyzer (TGA), X-ray diffraction (XRD), X-ray photoelectron spectroscopy measurements (XPS) and scanning electronic microscopy (SEM). Findings: According to cyclic voltammetry results, Ag/PPTI/GCE indicated good electrocatalytic activity toward the oxidation of hydrazine. The amperometric detection of hydrazine was then applied on Ag/PPTI/GCE. It exhibited a wide linear range from 0.05 to 50 µM, a low detection limit (S/N = 3) of 0.05 µM and high sensitivity of 0.45 µA/(µM•cm2). Originality/value: In authors’ perception, this approach emerges as an effective technique for developing efficient chemical sensors for environmental pollutants.
- 17 February 2022
- Published by Emerald Publishing in Pigment & Resin Technology
- Vol. 52 (4) , 413-421
Highly sensitive electrochemical sensor based on novel Ag Nps/Ppti films for detection of hydrazine
Purpose: A novel semiconducting macromolecule-polyperylene tetraamide (PPTI) was first synthesized with a simple method using 3, 4, 9, 10-perylene tetracarboxylic acid (PTCA) and hydrazine hydrate (N2H4). Design/methodology/approach: The Ag nanoparticle was doped on the surface or inside of the PPTI film to obtain a highly sensitive hydrazine sensor-Ag/PPTI, which was synthesized within one step. The structure of Ag/PPTI was characterized through various techniques such as Fourier transform infrared (FT-IR), thermogravimetric analyzer (TGA), X-ray diffraction (XRD), X-ray photoelectron spectroscopy measurements (XPS) and scanning electronic microscopy (SEM). Findings: According to cyclic voltammetry results, Ag/PPTI/GCE indicated good electrocatalytic activity toward the oxidation of hydrazine. The amperometric detection of hydrazine was then applied on Ag/PPTI/GCE. It exhibited a wide linear range from 0.05 to 50 µM, a low detection limit (S/N = 3) of 0.05 µM and high sensitivity of 0.45 µA/(µM•cm2). Originality/value: In authors’ perception, this approach emerges as an effective technique for developing efficient chemical sensors for environmental pollutants.
- Open Access
- 17 August 2020
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (50) , 30214-30222
Ultrasonic-assisted preparation of highly active Co3O4/MCM-41 adsorbent and its desulfurization performance for low H2S concentration gas
Co3O4/MCM-41 adsorbent with high surface area and more active sites was successfully prepared by ultrasonic assisted impregnation (UAI) technology and it has been found that the sulfur capacity was improved by 33.2% because of ultrasonication.
- 17 August 2020
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (50) , 30214-30222
Open AccessUltrasonic-assisted preparation of highly active Co3O4/MCM-41 adsorbent and its desulfurization performance for low H2S concentration gas
Co3O4/MCM-41 adsorbent with high surface area and more active sites was successfully prepared by ultrasonic assisted impregnation (UAI) technology and it has been found that the sulfur capacity was improved by 33.2% because of ultrasonication.
- Open Access
- 20 November 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (66) , 38124-38130
Amino-modified molecular sieves for adsorptive removal of H2S from natural gas
Amine-modified MCM-41 adsorbents (APTMS/MCM-41, PEI/MCM-41 and AAPTS/MCM-41) were prepared and characterized by XRD, N2 adsorption–desorption, FT-IR, TEM, SEM and TG-DTA. The performance of each adsorbent in a fixed adsorption bed for H2S removal was measured using a mixture of oxygen, nitrogen and hydrogen sulfide gases. It was found that the specific surface area decreased and the topography changed significantly after the use of each modified adsorbent. Nevertheless, all amine-modified MCM-41 adsorbents retained mesoporous silica of MCM-41. The H2S removal rate and saturated H2S capacity of APTMS/MCM-41 improved from 32.3% to 54.2% and 119.5 to 134.4 mg g−1, respectively, compared with that of MCM-41, and it showed the best performance among all adsorbents. APTMS/MCM-41, PEI/MCM-41 and AAPTS/MCM-41 were regenerated by maintaining at 423, 523 and 373 K in nitrogen for 3 h, respectively, and thus possessed high regenerability.
- 20 November 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (66) , 38124-38130
Open AccessAmino-modified molecular sieves for adsorptive removal of H2S from natural gas
Amine-modified MCM-41 adsorbents (APTMS/MCM-41, PEI/MCM-41 and AAPTS/MCM-41) were prepared and characterized by XRD, N2 adsorption–desorption, FT-IR, TEM, SEM and TG-DTA. The performance of each adsorbent in a fixed adsorption bed for H2S removal was measured using a mixture of oxygen, nitrogen and hydrogen sulfide gases. It was found that the specific surface area decreased and the topography changed significantly after the use of each modified adsorbent. Nevertheless, all amine-modified MCM-41 adsorbents retained mesoporous silica of MCM-41. The H2S removal rate and saturated H2S capacity of APTMS/MCM-41 improved from 32.3% to 54.2% and 119.5 to 134.4 mg g−1, respectively, compared with that of MCM-41, and it showed the best performance among all adsorbents. APTMS/MCM-41, PEI/MCM-41 and AAPTS/MCM-41 were regenerated by maintaining at 423, 523 and 373 K in nitrogen for 3 h, respectively, and thus possessed high regenerability.