Chao Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chao Zhang has a total of 104 co-authors. Here are the top co-authors by number of shared publications:
- Zhiguo Lv
State Key Laboratory Base for Eco-Chemical Engineering, College of Chemical Engineering, Qingdao University of Science and Technology, Qingdao 266042, China
22 shared publications Tao Zhuang
Key Laboratory of Rubber‐Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber‐plastics Qingdao University of Science & Technology Qingdao Shandong China
11 shared publicationsDelu Zhang
Xinjiang Key Laboratory of High Value Green Utilization of Low‐rank Coal Changji University Changji Xinjiang 831100 P. R. China
10 shared publicationsZhenmei Guo
State Key Laboratory Base for Eco-Chemical Engineering, College of Chemical Engineering, Qingdao University of Science and Technology, Qingdao, 266042, China
10 shared publicationsZhiguo Lv
State Key Laboratory Base for Eco‐Chemical Engineering, College of Chemical Engineering Qingdao University of Science and Technology Qingdao China
9 shared publicationsBaoquan Liu
Qingdao Univ Sci & Technol, Sch Chem Engn, State Key Lab Base Ecochem Engn, Key Lab Multiphase Flow React & Separat Engn Shan, Qingdao 266042, Peoples R China
7 shared publications
Latest Publications
- Open Access
- 13 March 2026
- Published by Wiley in Carbon Energy
KI‐Doped α‐Mo 2 C Stably Catalyze Near‐Equilibrium CO 2 to CO Beyond 1000 Hours
α‐Mo 2 C has demonstrated excellent potential in the catalytic conversion of CO 2 to CO. However, it tends to be reduced to thermodynamically stable β‐Mo 2 C under H 2 atmosphere, leading to deactivation during reverse water–gas shift (RWGS) reaction. In addition, α‐Mo 2 C cannot achieve an equilibrium CO yield below 500°C. This work first found that KI‐doped α‐Mo 2 C can achieve near‐equilibrium CO yields beyond 1000 h at 400°C, 4 bar in the RWGS reaction while maintaining the original α‐Mo 2 C crystal structure. Further research indicates that the doped KI effectively stabilized the oxygen content in α‐Mo 2 C, which is critical for stable catalytic activity. This modification not only reduces the formation‐desorption energy barriers for CO and H 2 O, but also markedly suppresses methane side reaction. Moreover, the incorporation of the KI reduces the oxidation state of Mo, thereby enhancing the surface alkalinity. This enhancement leads to an increased CO 2 conversion rate, thereby achieving near‐equilibrium CO yields at 400°C, 4 bar.
- 13 March 2026
- Published by Wiley in Carbon Energy
Open AccessKI‐Doped α‐Mo 2 C Stably Catalyze Near‐Equilibrium CO 2 to CO Beyond 1000 Hours
α‐Mo 2 C has demonstrated excellent potential in the catalytic conversion of CO 2 to CO. However, it tends to be reduced to thermodynamically stable β‐Mo 2 C under H 2 atmosphere, leading to deactivation during reverse water–gas shift (RWGS) reaction. In addition, α‐Mo 2 C cannot achieve an equilibrium CO yield below 500°C. This work first found that KI‐doped α‐Mo 2 C can achieve near‐equilibrium CO yields beyond 1000 h at 400°C, 4 bar in the RWGS reaction while maintaining the original α‐Mo 2 C crystal structure. Further research indicates that the doped KI effectively stabilized the oxygen content in α‐Mo 2 C, which is critical for stable catalytic activity. This modification not only reduces the formation‐desorption energy barriers for CO and H 2 O, but also markedly suppresses methane side reaction. Moreover, the incorporation of the KI reduces the oxidation state of Mo, thereby enhancing the surface alkalinity. This enhancement leads to an increased CO 2 conversion rate, thereby achieving near‐equilibrium CO yields at 400°C, 4 bar.
- 11 February 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (7) , 4046-4054
Regulating *OCHO Intermediate Adsorption via Bi–Sn Orbital Interaction-Induced Electronic Synergy for Selective CO 2 -to-Formate Conversion
Bi exhibits weak *OCHO intermediate adsorption, limiting its catalytic efficiency and requiring further optimization. Herein, an electronically tunable Bi-Sn bimetallic catalyst (denoted as Bi-Sn) was prepared. The electron-donating Bi and electron-accepting Sn undergo significant electronic reconstruction, which effectively stabilizes the *OCHO intermediate to promote formate selectivity. As a result, Bi-Sn accomplishes a high formate Faradaic efficiency (FE) of 93.4% at -0.8 V vs RHE while maintaining selectivity above 80% from -0.7 to -1.0 V vs RHE. XPS analysis reveals a positive binding-energy shift of Bi3+ and a negative shift of Sn4+ in Bi-Sn compared to pure Bi and Sn, confirming electron transfer from Bi to Sn. Furthermore, the PDOS results of Bi-Sn show significant overlap between the Bi-p and Sn-p orbitals, thereby indicating strong orbital hybridization to facilitate charge transfer. In addition, charge-density difference calculations demonstrate remarkable electron redistribution between Bi and Sn, thus stabilizing *OCHO adsorption. This electronic synergy strategy effectively strengthens *OCHO binding (ΔG*OCHO = -0.27 eV) while suppressing H adsorption (ΔG*H = 2.9 eV), thereby accelerating CO2 electroreduction toward formate. Hence, the orbital-overlap-induced Bi/Sn electronic synergy may provide rational guidance for designing high-performance CO2RR catalysts.
- 11 February 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (7) , 4046-4054
Regulating *OCHO Intermediate Adsorption via Bi–Sn Orbital Interaction-Induced Electronic Synergy for Selective CO 2 -to-Formate Conversion
Bi exhibits weak *OCHO intermediate adsorption, limiting its catalytic efficiency and requiring further optimization. Herein, an electronically tunable Bi-Sn bimetallic catalyst (denoted as Bi-Sn) was prepared. The electron-donating Bi and electron-accepting Sn undergo significant electronic reconstruction, which effectively stabilizes the *OCHO intermediate to promote formate selectivity. As a result, Bi-Sn accomplishes a high formate Faradaic efficiency (FE) of 93.4% at -0.8 V vs RHE while maintaining selectivity above 80% from -0.7 to -1.0 V vs RHE. XPS analysis reveals a positive binding-energy shift of Bi3+ and a negative shift of Sn4+ in Bi-Sn compared to pure Bi and Sn, confirming electron transfer from Bi to Sn. Furthermore, the PDOS results of Bi-Sn show significant overlap between the Bi-p and Sn-p orbitals, thereby indicating strong orbital hybridization to facilitate charge transfer. In addition, charge-density difference calculations demonstrate remarkable electron redistribution between Bi and Sn, thus stabilizing *OCHO adsorption. This electronic synergy strategy effectively strengthens *OCHO binding (ΔG*OCHO = -0.27 eV) while suppressing H adsorption (ΔG*H = 2.9 eV), thereby accelerating CO2 electroreduction toward formate. Hence, the orbital-overlap-induced Bi/Sn electronic synergy may provide rational guidance for designing high-performance CO2RR catalysts.
- 16 December 2025
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 13 (4) , 1617-1627
Cu 2 In/In core–shell interface regulating Cu 0/+ enables selective *OCHO capture for efficient CO 2 -to-formate conversion across a wide potential range
This study synthesizes a well-defined Cu 2 In/In core–shell catalyst. The Cu 2 In core and In shell synergistically induce interfacial electronic reconstruction, which precisely regulates Cu 0/+ species, achieving a peak FE formate of 93.6%.
- 16 December 2025
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 13 (4) , 1617-1627
Cu 2 In/In core–shell interface regulating Cu 0/+ enables selective *OCHO capture for efficient CO 2 -to-formate conversion across a wide potential range
This study synthesizes a well-defined Cu 2 In/In core–shell catalyst. The Cu 2 In core and In shell synergistically induce interfacial electronic reconstruction, which precisely regulates Cu 0/+ species, achieving a peak FE formate of 93.6%.
- 8 December 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (50) , 24910-24919
Sn-Induced Stable Cu + in Cu 2 O/Cu 6 Sn 5 Interface System for Stabilizing *OCHO in CO 2 -to-Formate Electroreduction
The rational construction of Cu-based interface with stable Cu+ species is crucial in CO2 electroreduction reactions. Herein, a Sn-induced Cu2O/Cu6Sn5 interface system (denoted as Cu2O/CuSn) with stable Cu+ is ingeniously constructed for the CO2-to-formate electroreduction reaction. At -1.1 V vs RHE, Cu2O/CuSn achieves a high-formate Faradaic efficiency of 91.3% and a partial current density of -53.87 mA cm-2. Cu2O/CuSn maintains formate selectivity above 80% over a wide potential range (-0.8 to -1.2 V vs RHE). Moreover, the Cu+ species exhibits high stability under reaction conditions. Cu-O bonds confirm the presence of oxidized Cu (mainly Cu2O), while Cu-Cu and Cu-Sn coordination suggests the formation of CuSn alloy. The presence of *OCHO as a key intermediate elucidates the formate formation pathway (*CO2-→ *OCHO → *HCOOH → HCOO-). Density functional theory (DFT) calculations reveal significant electron redistribution at the interface between Cu2O and CuSn alloy, modulating the electronic structure and stabilizing *OCHO adsorption. The synergy effect between Cu2O and CuSn alloy enhances CO2 adsorption, reduces the energy barrier for *OCHO formation, and effectively suppresses hydrogen evolution reaction (HER), enabling efficient CO2-to-formate conversion.
- 8 December 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (50) , 24910-24919
Sn-Induced Stable Cu + in Cu 2 O/Cu 6 Sn 5 Interface System for Stabilizing *OCHO in CO 2 -to-Formate Electroreduction
The rational construction of Cu-based interface with stable Cu+ species is crucial in CO2 electroreduction reactions. Herein, a Sn-induced Cu2O/Cu6Sn5 interface system (denoted as Cu2O/CuSn) with stable Cu+ is ingeniously constructed for the CO2-to-formate electroreduction reaction. At -1.1 V vs RHE, Cu2O/CuSn achieves a high-formate Faradaic efficiency of 91.3% and a partial current density of -53.87 mA cm-2. Cu2O/CuSn maintains formate selectivity above 80% over a wide potential range (-0.8 to -1.2 V vs RHE). Moreover, the Cu+ species exhibits high stability under reaction conditions. Cu-O bonds confirm the presence of oxidized Cu (mainly Cu2O), while Cu-Cu and Cu-Sn coordination suggests the formation of CuSn alloy. The presence of *OCHO as a key intermediate elucidates the formate formation pathway (*CO2-→ *OCHO → *HCOOH → HCOO-). Density functional theory (DFT) calculations reveal significant electron redistribution at the interface between Cu2O and CuSn alloy, modulating the electronic structure and stabilizing *OCHO adsorption. The synergy effect between Cu2O and CuSn alloy enhances CO2 adsorption, reduces the energy barrier for *OCHO formation, and effectively suppresses hydrogen evolution reaction (HER), enabling efficient CO2-to-formate conversion.
- 6 June 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (12) , 8561-8570
Alkynyl Carbon Dots in NiS-CdS: The Unique Electron Current Division Function for Enhanced Photoelectrocatalytic Hydrogen Evolution
- 6 June 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (12) , 8561-8570
Alkynyl Carbon Dots in NiS-CdS: The Unique Electron Current Division Function for Enhanced Photoelectrocatalytic Hydrogen Evolution
- 24 May 2025
- Published by Wiley in Rare Metals
- Vol. 44 (9) , 6232-6245
Core–shell CoPt@C assembled hierarchical catalysts via CH 4 ‐deposition strategy for efficient overall water splitting
This study, a core–shell CoPt@C assembled hierarchical catalyst (named CoPt@C) was prepared using a unique CH 4 deposition strategy for highly efficient overall water splitting. CoPt@C is composed of dense CoPt@C core–shell nanoparticles (NPs) and a minor proportion of curled CoPt@nanotubes (CoPt@CNTs). Moreover, by adjusting the CH 4 deposition time, the carbon shell thickness can be effectively regulated. Benefiting from the synergistic interaction between CoPt alloy and carbon shell, coupled with the high conductivity of the carbon shell, the overpotential of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) for CoPt@C is 15 and 120 mV at 10 mA cm −2 . In addition, CoPt@C requires only 1.58 V to achieve 10 mA cm −2 for overall water splitting and maintains excellent stability over 80 h of continuous electrolysis. Density functional theory (DFT) calculations suggest that electrons transfer from the CoPt alloy NPs to the carbon shell, rendering the carbon shell electron‐rich. Additionally, the hydrogen adsorption energy (Δ G *H ) and the rate‐determining step (Δ G *OOH ) on CoPt@C are only −0.22 and 1.9 eV, respectively.
- 24 May 2025
- Published by Wiley in Rare Metals
- Vol. 44 (9) , 6232-6245
Core–shell CoPt@C assembled hierarchical catalysts via CH 4 ‐deposition strategy for efficient overall water splitting
This study, a core–shell CoPt@C assembled hierarchical catalyst (named CoPt@C) was prepared using a unique CH 4 deposition strategy for highly efficient overall water splitting. CoPt@C is composed of dense CoPt@C core–shell nanoparticles (NPs) and a minor proportion of curled CoPt@nanotubes (CoPt@CNTs). Moreover, by adjusting the CH 4 deposition time, the carbon shell thickness can be effectively regulated. Benefiting from the synergistic interaction between CoPt alloy and carbon shell, coupled with the high conductivity of the carbon shell, the overpotential of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) for CoPt@C is 15 and 120 mV at 10 mA cm −2 . In addition, CoPt@C requires only 1.58 V to achieve 10 mA cm −2 for overall water splitting and maintains excellent stability over 80 h of continuous electrolysis. Density functional theory (DFT) calculations suggest that electrons transfer from the CoPt alloy NPs to the carbon shell, rendering the carbon shell electron‐rich. Additionally, the hydrogen adsorption energy (Δ G *H ) and the rate‐determining step (Δ G *OOH ) on CoPt@C are only −0.22 and 1.9 eV, respectively.
- 21 May 2025
- Published by Wiley in ChemistrySelect
- Vol. 10 (20)
The Construction of g‐C 3 N 4 Coating Layer on CoN‐MoN Fiber via Thermopolymerization Nitriding Strategy for Enhanced Electrocatalytic Alkaline HER
To achieve efficient electrocatalytic alkaline hydrogen evolution (HER), novel preparation methods for dual‐transition metal nitrides, with dense g‐C 3 N 4 /transition metal nitride interface, should be proposed. Herein, a novel g‐C 3 N 4 layer‐coated CoN‐MoN fiber electrocatalyst was prepared on Co foam (CF) via thermopolymerization nitriding strategy. During the fabrication process, CoN‐MoN fiber was prepared facilely on CF, and, meanwhile, a g‐C 3 N 4 layer was successfully coated on CoN‐MoN fiber. The synthesized electrocatalyst (g‐C 3 N 4 @CoN‐MoN/CF) exhibits a low overpotential of 138 mV at 100 mA cm −2 , a small Tafel slope (89 mV dec −1 ) during alkaline HER. The high water splitting capacity could be attributed to the special g‐C 3 N 4 coating structure on the CoN‐MoN fiber. From DFT calculation, an obvious electron transfer occurred at the g‐C 3 N 4 /CoN‐MoN interface, which not only improves the hydrolytic dissociation ability but also optimizes its Gibbs free energy of hydrogen (ΔG H* ). Compared with the ΔG H* of g‐C 3 N 4 and CoN‐MoN/CF, g‐C 3 N 4 @CoN‐MoN/CF showed a suitable ΔG H* of −2.97 eV, which is relatively close to the ideal ΔG H* (0 eV). Moreover, the H─O─H bond angle of adsorbed water on g‐C 3 N 4 @CoN‐MoN/CF increased to 105.47°, and the H─O bond was extended to 1.009 Å, which facilitates the breaking of the H─O bond, thus reducing H* to H 2 .
- 21 May 2025
- Published by Wiley in ChemistrySelect
- Vol. 10 (20)
The Construction of g‐C 3 N 4 Coating Layer on CoN‐MoN Fiber via Thermopolymerization Nitriding Strategy for Enhanced Electrocatalytic Alkaline HER
To achieve efficient electrocatalytic alkaline hydrogen evolution (HER), novel preparation methods for dual‐transition metal nitrides, with dense g‐C 3 N 4 /transition metal nitride interface, should be proposed. Herein, a novel g‐C 3 N 4 layer‐coated CoN‐MoN fiber electrocatalyst was prepared on Co foam (CF) via thermopolymerization nitriding strategy. During the fabrication process, CoN‐MoN fiber was prepared facilely on CF, and, meanwhile, a g‐C 3 N 4 layer was successfully coated on CoN‐MoN fiber. The synthesized electrocatalyst (g‐C 3 N 4 @CoN‐MoN/CF) exhibits a low overpotential of 138 mV at 100 mA cm −2 , a small Tafel slope (89 mV dec −1 ) during alkaline HER. The high water splitting capacity could be attributed to the special g‐C 3 N 4 coating structure on the CoN‐MoN fiber. From DFT calculation, an obvious electron transfer occurred at the g‐C 3 N 4 /CoN‐MoN interface, which not only improves the hydrolytic dissociation ability but also optimizes its Gibbs free energy of hydrogen (ΔG H* ). Compared with the ΔG H* of g‐C 3 N 4 and CoN‐MoN/CF, g‐C 3 N 4 @CoN‐MoN/CF showed a suitable ΔG H* of −2.97 eV, which is relatively close to the ideal ΔG H* (0 eV). Moreover, the H─O─H bond angle of adsorbed water on g‐C 3 N 4 @CoN‐MoN/CF increased to 105.47°, and the H─O bond was extended to 1.009 Å, which facilitates the breaking of the H─O bond, thus reducing H* to H 2 .
- 10 March 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 689, 137282
In situ doping Pt single atoms into 3D flower-like 1T-MoS2 via Pt-S bond for efficient hydrogen evolution reaction
- 10 March 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 689, 137282
In situ doping Pt single atoms into 3D flower-like 1T-MoS2 via Pt-S bond for efficient hydrogen evolution reaction
- 24 February 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 688, 233-240
Anchoring Pt single atoms on 3D flower-like NiMoP via Pt Ni bonding with enhanced hydrogen evolution reaction
- 24 February 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 688, 233-240
Anchoring Pt single atoms on 3D flower-like NiMoP via Pt Ni bonding with enhanced hydrogen evolution reaction
- 24 February 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (9) , 4580-4591
Open Hollow Nut-like Co–PtSA Decorated with CoPt@C for Enhanced Hydrogen Evolution Reaction
Constructing an efficient open hollow nut-like Co-MOF/Pt-based electrocatalyst via a partial etching strategy remains challenging. In this study, a novel concurrent thermal polymerization-etching strategy is introduced to prepare a unique open hollow nut-like Co-PtSA decorated with a CoPt@C layer electrocatalyst (denoted as Co-PtSA/CoPt@C), exhibiting outstanding hydrogen evolution reaction performance. In Co-PtSA/CoPt@C, the distinctive open hollow nut-like Co-PtSA structure is encapsulated within a CoPt@C layer. The CoPt@C layer consists of CoPt@CNTs and a CoPt@C core-shell. Electrochemical tests demonstrate that Co-PtSA/CoPt@C exhibits remarkable catalytic performance, requiring only 13 mV of overpotential in 1 M KOH to achieve a current density of 10 mA cm-2. Additionally, the turnover frequency of Co-PtSA/CoPt@C reaches 0.169 s-1 at η = 50 mV, 0.466 s-1 at η = 100 mV, and 1.33 s-1 at η = 200 mV, surpassing the performance of commercial 20% Pt/C. In addition, the adsorption Gibbs free energy for hydrogen on Co-PtSA/CoPt@C is notably low, with a value of -0.65 eV, which promotes efficient H2 formation.
- 24 February 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (9) , 4580-4591
Open Hollow Nut-like Co–PtSA Decorated with CoPt@C for Enhanced Hydrogen Evolution Reaction
Constructing an efficient open hollow nut-like Co-MOF/Pt-based electrocatalyst via a partial etching strategy remains challenging. In this study, a novel concurrent thermal polymerization-etching strategy is introduced to prepare a unique open hollow nut-like Co-PtSA decorated with a CoPt@C layer electrocatalyst (denoted as Co-PtSA/CoPt@C), exhibiting outstanding hydrogen evolution reaction performance. In Co-PtSA/CoPt@C, the distinctive open hollow nut-like Co-PtSA structure is encapsulated within a CoPt@C layer. The CoPt@C layer consists of CoPt@CNTs and a CoPt@C core-shell. Electrochemical tests demonstrate that Co-PtSA/CoPt@C exhibits remarkable catalytic performance, requiring only 13 mV of overpotential in 1 M KOH to achieve a current density of 10 mA cm-2. Additionally, the turnover frequency of Co-PtSA/CoPt@C reaches 0.169 s-1 at η = 50 mV, 0.466 s-1 at η = 100 mV, and 1.33 s-1 at η = 200 mV, surpassing the performance of commercial 20% Pt/C. In addition, the adsorption Gibbs free energy for hydrogen on Co-PtSA/CoPt@C is notably low, with a value of -0.65 eV, which promotes efficient H2 formation.