Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Madhusree Kundu has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Development of Soft Concentration Sensor for Esterification Reaction Using Electrochemical Features

    by Ashutosh Kumar Pathak, Madhusree Kundu

    Esters are industrially important products with a broad range of applications from flavoring agents to jet fuels. In this study, butyl butyrate ester is produced in a batch reactor at different operating parameters and electrochemical signatures (Cyclic Voltammetry) were recorded for samples taken at certain intervals. Predictive models that is, Multi linear regression (MLR) and Partial least square (PLS) regression for prediction of unconverted butyric acid/conversion were developed. Molar ratio, temperature, and current peak heights were used as input variables for MLR model while reduction current signal was used as input variables for PLS model. The developed soft sensor is advocating as a replacement for physical concentration sensor. As proof of concept, closed loop simulation of the process using PID controller was undertaken to assess the performance of the soft sensor in regulator mode at different ensemble of operating conditions. In closed loop sensing, disturbance rejection is slightly improved when PLS model was used as an estimator.

  • Open Access

    A Unified Framework Using Orthogonal Hybrid Functions for Solving Linear and Nonlinear Fractional Differential Systems

    by Seshu Kumar Damarla, Madhusree Kundu

    This paper presents a novel and computationally efficient numerical method for solving systems of fractional-order differential equations using orthogonal hybrid functions (HFs). The proposed HFs are constructed by combining piecewise constant orthogonal sample-and-hold functions with piecewise linear orthogonal right-handed triangular functions, resulting in a flexible and accurate approximation basis. A central innovation of the method is the derivation of generalized one-shot operational matrices that approximate the Riemann–Liouville fractional integral, enabling direct integration of differential operators of arbitrary order. These matrices act as unified integrators for both integer and non-integer orders, enhancing the method’s applicability and scalability. A rigorous convergence analysis is provided, establishing theoretical guarantees for the accuracy of the numerical solution. The effectiveness and robustness of the approach are demonstrated through several benchmark problems, including fractional-order models related to smoking dynamics, lung cancer progression, and Hepatitis B infection. Comparative results highlight the method’s superior performance in terms of accuracy, numerical stability, and computational efficiency when applied to complex, nonlinear, and high-dimensional fractional-order systems.


  • Open Access

    Novel Hybrid Function Operational Matrices of Fractional Integration: An Application for Solving Multi-Order Fractional Differential Equations

    by Seshu Kumar Damarla, Madhusree Kundu

    Although fractional calculus has evolved significantly since its origin in the 1695 correspondence between Leibniz and L’Hôpital, the numerical treatment of multi-order fractional differential equations remains a challenge. Existing methods are often either computationally expensive or reliant on complex operational frameworks that hinder their broader applicability. In the present study, a novel numerical algorithm is proposed based on orthogonal hybrid functions (HFs), which were constructed as linear combinations of piecewise constant sample-and-hold functions and piecewise linear triangular functions. These functions, belonging to the class of degree-1 orthogonal polynomials, were employed to obtain the numerical solution of multi-order fractional differential equations defined in the Caputo sense. A generalized one-shot operational matrix was derived to explicitly express the Riemann–Liouville fractional integral of HFs in terms of the HFs themselves. This allowed the original multi-order fractional differential equation to be transformed directly into a system of algebraic equations, thereby simplifying the solution process. The developed algorithm was then applied to a range of benchmark problems, including both linear and nonlinear multi-order FDEs with constant and variable coefficients. Numerical comparisons with well-established methods in the literature revealed that the proposed approach not only achieved higher accuracy but also significantly reduced computational effort, demonstrating its potential as a reliable and efficient numerical tool for fractional-order modeling.


  • Esterification of acetic acid with butanol: kinetic study and fuzzy modelling using electrochemical parameters

    by Ashutosh K. Pathak, Madhusree Kundu

    This study explores the esterification of acetic acid with n -butanol using methanesulfonic acid (MSA) as a homogenous catalyst. The experiments were conducted in a batch reactor, kinetic study has been done using an ideal concentration-based model, and an activity-based model. The activity coefficients for species taking part in the reaction are estimated through the UNIFAC model. The effect of various operating variables including temperature (60–90 °C), reactant molar ratio of n -butanol to acetic acid (1–3), and catalyst loading of (0.5–1.5 wt%) on acetic acid conversion was investigated. Both the kinetic models are able to predict the conversion with high accuracy ( R 2 = 0.99). The conversion of acetic acid has been mapped in terms of electrochemical parameters using electrochemical impedance spectroscopy (EIS). A constant phase element (CPE) coupled with diffusion model has been used for ascertaining the impedance parameters. The impedance parameters obtained on fitting the equivalent circuit have been used for developing a fuzzy inference system (FIS) based on Takagi and Sugeno’s approach. The developed FIS exhibits a higher degree of accuracy in predicting the acetic acid conversion/reaction yield. The results obtained through the developed FIS indicated its use as a soft sensor in esterification industries.

  • Electrochemical sensor development for detecting organophosphate pesticide using CuO nanograss electrode

    by Ashirbad Khuntia, Madhusree Kundu, Kamalakanta Mahapatra

    In this work, copper oxide (CuO) nanograss (NGs) were synthesized on copper foil as electrodes through anodization and annealing processes. After the successful synthesis of the CuO NG electrode, it was characterized using field emission scanning electron microscopy (FESEM) and X‐ray diffraction (XRD) analysis. Anodization duration was optimized for NG synthesis and was found to be 20 min with the help of FESEM analysis. The synthesized electrodes were used to analyze the organophosphate pesticides (OPPs), namely ‘malathion’ and ‘chlorpyrifos’, in the absence and presence of interfering molecules using differential pulse voltammetry (DPV). The proposed sensor functions based on the current inhibition ratio. The parameters like pH, accumulation time, and ionic strength of supporting electrolyte were optimized to be 7 pH, 9 min, and 0.1 M potassium chloride (KCl), respectively, for determining the current inhibition ratio (ΔI/I0). The developed sensor was sensitive and selective, with limit of detection (LOD) as low as 1 ppb for both pesticides. The limit of quantification (LOQ) was 1 ppb for chlorpyrifos and 10 ppb for malathion. The sensor's selectivity was also studied by adding Pb(NO3)2, Zn(NO3)2, NiCl2, and carbendazim to a fixed malathion and chlorpyrifos concentration, and minimal interferences were observed in the detection of malathion and chlorpyrifos. The sensor's functionality was validated using an unknown concentration of malathion and chlorpyrifos in water and food samples with an average recovery of 95% when analyzed with the electrochemical method and high performance liquid chromatography (HPLC). The sensitivity of the electrochemical sensor for chlorpyrifos detection was found to be 0.6678 μA/ppb, and for malathion detection, it was found to be 1.139 μA/ppb.


  • Esterification of butyric acid with n‐butanol: Kinetic study using experimental data and modeling

    by Ashutosh Kumar Pathak, Madhusree Kundu

    Present study involves the investigation of the esterification kinetics between butyric acid and n‐butanol. This reaction was conducted in a batch reactor, utilizing homogeneous methanesulfonic acid (MSA) catalyst. Response surface methodology (RSM) was conducted prior to the kinetic study using “Design Expert; version‐11.0” for finding the causal factors influencing the conversion of butyric acid. Most important factors identified with their limits against conversions (during optimization of the process using RSM) were taken up to critically analyze the effect of them on butyric acid conversion. Concentration and activity‐based model of the process were proposed assuming second order reversible reaction scheme using homogeneous MSA catalyst. During the study of non‐ideal behavior of the system, UNIFAC model was adapted for assessing the activity coefficients of species present in equilibrated liquid phase. Experimental data were used to evaluate kinetic and thermodynamic parameters such as rate constants, activation energy, enthalpy, and entropy of the system. The endothermic nature of esterification was confirmed by positive value of enthalpy obtained. The effect of various levels of causal variables like temperature (60–90°C), catalyst concentration (0.5–1.5 wt.%), and molar ratio of n‐butanol to butyric acid (1–3) on conversion kinetics of butyric acid was investigated during transient and equilibrium phase of the reaction. It has been observed that molar ratio of butanol to butyric acid has the highest influence on the conversion. The rate equation derived offered a kinetic and thermodynamic framework to the generated data. It also exhibits a notable degree of conformity of predicted data to the experimental ones and effectively characterizes the system across different reaction temperatures, reactant molar ratio, and catalyst concentration.


  • Classification and authentication of operating conditions in different processes using Partial Least Squares

    by Rubal Chandra, Madhusree Kundu

    Partial Least Squares (PLS) is a supervised multivariate statistical/machine learning technique, which is used for classification and identification/authentication of a variety of operating conditions in tomato juice concentrator/evaporator, yeast fermentation bioreactor and fluid catalytic cracking process plants. Data for the three processes were generated pertaining to different operating conditions (for each of them) including faulty ones by simulating their mechanistic models over 25 h. The simulated data at transient conditions were chosen for further processing. They were divided into training and testing data pools. After training, the developed PLS model could classify various process operating conditions 100 % accurately and identify unknown process operating conditions (simulated using training pool with certain degree of variations in them) pertaining to the processes.


  • Open Access

    Analysis and simulation of fractional-order financial models with and without market confidence using triangular basis functions

    by Shweta Dubey, Madhusree Kundu, S. Chakraverty

    Researchers have long been interested in the dynamics of the financial system, including its stability, periodic and chaotic behaviour, as well as its effects on market confidence. The government, financial institutions, and all other stakeholder groups in a healthy economic system can be better prepared with accurate financial trend predictions. The financial system appears to be best described as having a fractional order because of the long memory effect in market patterns. The study of nonlinear dynamical phenomena, such as equilibrium points, stability, the Lyapunov exponent, the Lyaponov dimension, chaos, the impact of market confidence on financial systems, etc., enhances overall comprehension. The numerical simulation of the fractional-order model of this system has been done using the triangular basis function (TBF).