Zaher Hashisho
Research Subjects
Zaher Hashisho has a total of 118 co-authors. Here are the top co-authors by number of shared publications:
James E. Anderson
Ford Motor Company, Research and Advanced Engineering, Dearborn, MI 48121, United States
13 shared publicationsJohn H. Phillips
10 shared publicationsMark Nichols
Research & Advanced Engineering, Ford Motor Company, Dearborn, Michigan 48121 United States
9 shared publicationsJohn D. Atkinson
University at Buffalo, Buffalo, NY 14260, USA
8 shared publicationsPooya Shariaty
Department of Civil and Environmental Engineering, University of Alberta, Edmonton, AB, Canada
8 shared publicationsArman Peyravi
Department of Civil and Environmental Engineering, University of Alberta, Edmonton, AB T6G 2W2, Canada
7 shared publications
Latest Publications
- Open Access
- 18 September 2026
- Published by Elsevier in Process Safety and Environmental Protection
- Vol. 220
CFD-based assessment of welders’ exposure to welding fumes in a real-world booth
- 18 September 2026
- Published by Elsevier in Process Safety and Environmental Protection
- Vol. 220
Open AccessCFD-based assessment of welders’ exposure to welding fumes in a real-world booth
- 8 March 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (10) , 5612-5621
Cyclic Adsorption–Regeneration of Polar and Nonpolar Volatile Organic Compounds on Honeycomb Zeolite Adsorbents
- 8 March 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (10) , 5612-5621
Cyclic Adsorption–Regeneration of Polar and Nonpolar Volatile Organic Compounds on Honeycomb Zeolite Adsorbents
- Open Access
- 6 September 2025
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 348
Electrothermal regeneration of carbon-modified CuBTC for volatile organic compound adsorption
- 6 September 2025
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 348
Open AccessElectrothermal regeneration of carbon-modified CuBTC for volatile organic compound adsorption
- Open Access
- 14 February 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (8) , 4525-4533
Microwave-Assisted Remediation of Nonaqueous Oil Sand Gangue: Effects of Solvent, Fines, and Water Content
- 14 February 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (8) , 4525-4533
Open AccessMicrowave-Assisted Remediation of Nonaqueous Oil Sand Gangue: Effects of Solvent, Fines, and Water Content
- Open Access
- 5 December 2024
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 15 (1) , 219-220
Correction: Integrated adsorption and photocatalytic degradation of VOCs using a TiO2/diatomite composite: effects of relative humidity and reaction atmosphere
Correction for ‘Integrated adsorption and photocatalytic degradation of VOCs using a TiO2/diatomite composite: effects of relative humidity and reaction atmosphere’ by Guangxin Zhang et al., Catal. Sci. Technol., 2020, 10, 2378–2388, https://doi.org/10.1039/D0CY00168F.
- 5 December 2024
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 15 (1) , 219-220
Open AccessCorrection: Integrated adsorption and photocatalytic degradation of VOCs using a TiO2/diatomite composite: effects of relative humidity and reaction atmosphere
Correction for ‘Integrated adsorption and photocatalytic degradation of VOCs using a TiO2/diatomite composite: effects of relative humidity and reaction atmosphere’ by Guangxin Zhang et al., Catal. Sci. Technol., 2020, 10, 2378–2388, https://doi.org/10.1039/D0CY00168F.
- 2 October 2024
- Published by Taylor & Francis in Journal of Occupational and Environmental Hygiene
- Vol. 21 (10) , 709-720
Evaluation of masks and mask material suitability for bioaerosol capture
Non-medical masks such as disposable non-medical, commercially produced cloth, and homemade masks are not regulated like surgical masks. Their performance, in terms of filtration efficiency and breathability, is variable and unreliable. This research provides a quantitative evaluation of various non-medical masks, assesses their fabrics' potential for the reduction of transmission of bioaerosols such as the SARS-CoV-2 virus, and compares them to surgical masks and N95 filtering facepiece respirators. Using a testing line with a NaCl challenge aerosol, four types of commercial reusable cloth masks, two types of disposable non-medical masks, three types of surgical or N95 masks, and seven types of commonly available materials were tested individually and in combinations. The testing line and procedure were adapted from the ASTM F2299-03: Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres testing method used for testing surgical masks. Filtration efficiencies at 0.15 mu m particle diameter at a face velocity of 25 cm/sec for commercial cloth masks, disposable non-medical masks, surgical masks, commercial mask combinations, and homemade combinations ranged from 16-29%, 39-76%, 91-97%, 51-95%, and 45-94%, respectively. The pressure drop results for the different masks and material combinations were all under 3 mm H2O/cm2 except for one material configuration. This study builds on other research that looks at individual materials and masks by testing combinations alongside the individual masks and materials. With proper layering, household materials can achieve the filtration efficiency and low pressure drop requirements of surgical masks. The filtration capabilities of disposable and cloth mask fabrics vary considerably meaning that they are not a reliable or consistent facemask option, regardless of fit.
- 2 October 2024
- Published by Taylor & Francis in Journal of Occupational and Environmental Hygiene
- Vol. 21 (10) , 709-720
Evaluation of masks and mask material suitability for bioaerosol capture
Non-medical masks such as disposable non-medical, commercially produced cloth, and homemade masks are not regulated like surgical masks. Their performance, in terms of filtration efficiency and breathability, is variable and unreliable. This research provides a quantitative evaluation of various non-medical masks, assesses their fabrics' potential for the reduction of transmission of bioaerosols such as the SARS-CoV-2 virus, and compares them to surgical masks and N95 filtering facepiece respirators. Using a testing line with a NaCl challenge aerosol, four types of commercial reusable cloth masks, two types of disposable non-medical masks, three types of surgical or N95 masks, and seven types of commonly available materials were tested individually and in combinations. The testing line and procedure were adapted from the ASTM F2299-03: Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres testing method used for testing surgical masks. Filtration efficiencies at 0.15 mu m particle diameter at a face velocity of 25 cm/sec for commercial cloth masks, disposable non-medical masks, surgical masks, commercial mask combinations, and homemade combinations ranged from 16-29%, 39-76%, 91-97%, 51-95%, and 45-94%, respectively. The pressure drop results for the different masks and material combinations were all under 3 mm H2O/cm2 except for one material configuration. This study builds on other research that looks at individual materials and masks by testing combinations alongside the individual masks and materials. With proper layering, household materials can achieve the filtration efficiency and low pressure drop requirements of surgical masks. The filtration capabilities of disposable and cloth mask fabrics vary considerably meaning that they are not a reliable or consistent facemask option, regardless of fit.
- 25 July 2024
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 476
A guide for JHM authors focusing on advanced oxidation and reduction processes for environmental applications
- 25 July 2024
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 476
A guide for JHM authors focusing on advanced oxidation and reduction processes for environmental applications
- Open Access
- 20 July 2024
- Published by Elsevier in Separation and Purification Technology
- Vol. 354, 128846
Modeling of adsorption process on monolith adsorbents: A mini-review
- 20 July 2024
- Published by Elsevier in Separation and Purification Technology
- Vol. 354, 128846
Open AccessModeling of adsorption process on monolith adsorbents: A mini-review
- 22 January 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 482
Experimental and modeling study of volatile organic compounds adsorption over zeolitic monolith adsorbent
- 22 January 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 482
Experimental and modeling study of volatile organic compounds adsorption over zeolitic monolith adsorbent