WZWei Zhou

Wei Zhou

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wei Zhou has a total of 50 co-authors. Here are the top co-authors by number of shared publications:

  • Junhao Xie

    Department of Electronic Engineering, Harbin Institute of Technology, Harbin, China

    10 shared publications
  • Baiqiang Zhang

    Department of Electronic Engineering Harbin Institute of Technology Harbin China

    4 shared publications
  • Gaopeng Li

    Key Laboratory of Marine Environmental Monitoring and Information Processing, Ministry of Industry and Information Technology, Harbin Institute of Technology, Harbin, China

    4 shared publications
  • Junhao Xie

    4 shared publications
  • Yuhan Du

    Key Laboratory of Marine Environmental Monitoring and Information Processing Ministry of Industry and Information Technology Harbin Institute of Technology Harbin People's Republic of China

    4 shared publications
  • Shaobin Li

    Department of Electronic Engineering Harbin Institute of Technology Harbin 150001 People's Republic of China

    3 shared publications

Latest Publications

  • CARL-RTDETR: A Lightweight Real-Time Detection Transformer for SAR Object Detection in Complex Scenarios

    by Wei Chen, Zhaoyu Liu, Zheng Li, Yuan Ji, Qingqing Deng, Wei Zhou, Yong Bo, Lixia Yang, Zhixiang Huang, Xianliang Wu, et al.

    To meet the real-time requirements of synthetic aperture radar (SAR) target detection on resource-constrained embedded platforms, a Compact Adaptive Representation Learning Real-Time Detection Transformer (CARL-RTDETR) model is proposed. The model is tailored to SAR image characteristics, incorporating a cross-stage spectral convolution mixer module that suppresses background interference and noise while enhancing features of small targets. An anchor-free downsampling module is employed to avoid the loss of small target information. Furthermore, a reparameterized context anchor aggregation module is designed to substantially reduce model parameters and computational costs, while improving the robustness of multi-scale features. The model further integrates a layer-adaptive magnitude-based pruning algorithm to enable structured compression. Evaluated on the SARDet-100K dataset, CARL-RTDETR reduces parameters by 47.2% relative to the baseline RT-DETR50, and achieves an average precision (AP) of 56.1% and AP75 of 61.0%, representing improvements of 3.0 and 4.6 percentage points, respectively. These results demonstrate the model’s suitability for real-time embedded deployment of SAR target detection in complex environments while maintaining high accuracy.

  • Performance Analysis of a Readout Circuit With Oscillator and Diode Feedback Rectifier for Capacitive Proximity Sensor

    by Yong Ye, Yi Fei, Yuting Liu, Jiahao Deng, Wei Zhou, Weihan Yin, Yong Bo

    Enhancing the sensitivity and resolution of the readout circuit is a pivotal technological approach to extending the detection range of capacitive proximity sensors (CPS). This paper introduces a novel high-sensitivity readout circuit that leverages the resonant amplification effect of the LC network in an oscillator to generate high-voltage excitation signals. By incorporating a feedback diode rectifier circuit, the circuit achieves a significant boost in sensitivity and resolution. Experimental results demonstrate an ultra-high sensitivity of 55.8 V/pF and a resolution of 0.45 fF, far surpassing conventional methods. In various detection scenarios with different electrode sizes, the proposed circuit exhibits a superior detection distance compared to commercial CDC chips and capacitive proximity switches. Furthermore, the paper systematically investigates the influence of circuit parameters on its performance. With its simple structure, low cost, and exceptional performance, this circuit is well-suited for applications in capacitive proximity switches and smart environmental monitoring.

  • Open Access

    Fully Electronic 2D DDM‐MIMO Near‐Field Imaging Array

    by Qun Zhang, Zongming Duan, Bing Wu, Bowen Wu, Wei Zhou, Zhixiang Huang

    A fully electronic two‐dimensional Doppler division multiplexing multiple‐input and multiple‐output near‐field imaging array is firstly proposed. The array is motivated by transmitting signal multiplexing in the Doppler domain and real aperture imaging, which can reduce the scanning time and thus reduce the impact of motion errors on the image reconstruction of dangerous objects. Simulation and experimental results are utilised to verify the effectiveness of the proposed array.

  • Development of Leakage Current Monitoring Senors of MOV for URV/ERV Series Capacitors

    by Zhiyuan Li, Mo Chen, He Liu, Wei Zhou, Hui Yu, Yuqiu Lei

    According to the requirements of monitoring high-voltage equipment and monitoring leakage current of MOVs in series capacitors, double core compensation methods was adopted in this paper, and large window or diameter of micro-current sensor was developed. The developed sensor coil has an outer diameter D=160mm, an inner diameter d=120mm, and a thickness H=10mm. The maximum measurement error is −2.9% in the range of 0.2mA to 5mA. It is difficult for the sensor to measure the current below 0.2mA, because of the interference of background noise. Using the same compensation circuit, the larger the diameter of sensor will be, the worse the measurement accuracy will be. The transient voltage suppressor (TVS) and thyristor surge protection device (TSPD) were adopted in the aspect of impulse current protection design. The test results showed that the sensor developed worked normally under the impact of 8/20µs1@10kA and 2mA@2.5kA square wave and after the test the measured amplitude was still accurate. The sensor presented various of transient processes under the impact of 8/20µs and 2ms square wave current. The sensor had certain ability of self-recovery and self-adjustment, and it can be restored to normal after about 120ms~ 165ms. The transient process of the sensor is related to the material, dimension of the core, coil turns and the dynamic characteristics of the compensation circuit.

  • Impulsive Noise Excision Using Robust Smoothing

    by Baiqiang Zhang, Junhao Xie, Minglei Sun, Wei Zhou

    The impulsive noise originated from regional lightning discharges can dramatically degrade the performance of skywave over-the-horizon radar (OTHR) target detection with generally 10–20-dB increase of noise level in the Doppler domain. As a result, it is necessary to excise impulsive noise in corrupted data while preserving the useful echo signal. Traditional techniques first locate the impulsive noise in slow-time data with a high-pass finite-duration impulse response (FIR) notch filter and then restore the contaminated samples by neighboring good data. However, the effect of impulsive noise is propagated into the subsequent filtered residuals, which will mislead the impulsive noise detection. Instead of the conventional detection-interpolation methods, we propose a novel impulsive noise excision approach based on robust smoothing. The proposed method can robustly smooth the corrupted data and determine the position of impulsive noise with a preset threshold against the residuals of corrupted data subtracting the smoothed signal. The contaminated data at last are replaced by the smoothed signal. Experimental results have demonstrated the effectiveness of our proposed method.


  • Open Access

    Robust low‐rank Hankel matrix recovery for skywave radar slow‐time samples

    by Baiqiang Zhang, Junhao Xie, Wei Zhou

    In skywave radar, the slow‐time samples received in a certain range‐azimuth cell are usually processed for signal analysis and target detection. Particularly, to extract the principal components, such as sea clutter and target signal, in slow‐time samples, the Hankel matrix structure and subspace‐based methods are often applied, which can also reduce the additive Gaussian noise. In the real environment, the slow‐time samples sometimes are seriously contaminated by the transient interference, affecting the performance of useful signal reconstruction. The robust low‐rank matrix recovery methods have been applied to solve this problem, where the transient interference is assumed to be sparse, following the Laplace distribution. However, the Hankel structures of useful signal and transient interference have not been fully utilized in the conventional methods, which can enhance the reconstruction performance. Here, the robust low‐rank Hankel matrix recovery problems is reformulated for skywave radar slow‐time samples and solve them with the inexact augmented Lagrange multiplier method. Additionally, the low‐rank Hankel matrix completion problem is discussed, where the location of the transient interference is determined. The experimental results have demonstrated the good performance of our proposed methods and also some interesting conclusions are obtained.


  • ISAR Imaging for Low-Earth-Orbit Target Based on Coherent Integrated Smoothed Generalized Cubic Phase Function

    by Yuhan Du, Yicheng Jiang, Yong Wang, Wei Zhou, Zitao Liu

    In the high-resolution inverse synthetic aperture radar (ISAR) imaging of low-earth-orbit space targets, the received signal from one range bin can be modeled as a multicomponent cubic phase signal (CPS) after motion compensation. The chirp rates and the quadratic chirp rates of the multicomponent CPS need to be estimated with parameter estimation algorithms to obtain the focused ISAR image. In this article, a new parametric range-instantaneous-Doppler ISAR imaging method is proposed, which introduces a new algorithm for parameter estimation of multicomponent CPSs. The cross terms of the generalized cubic phase function (GCPF) are analyzed. By eliminating the cross terms in the ambiguity function domain, the coherent integrated smoothed GCPF (CISGCPF) is proposed to estimate the quadratic chirp rates. Numerical examples are provided to verify the accuracy of the parameter estimation and the effectiveness of the cross-term suppression for CISGCPF in processing multicomponent signals. Simulated and real data imaging results demonstrate the performance of the CISGCPF-based ISAR imaging method. Comparisons with the existing algorithms show that the proposed method is effective in reconstructing focused images with less fake scatterers.


  • A Robust Two-Parameter CFAR Detector for Skywave Radar Ship Detection

    by Baiqiang Zhang, Junhao Xie, Minglei Sun, Wei Zhou

    Ship detection with constant false alarm rate (CFAR) detection is a key problem in skywave radar. This paper proposes a robust two-parameter CFAR detector for ship detection in nonhomogeneous Weibull distributed clutter, where the scale parameter is estimated by the weighted amplitude iteration (WAI) of samples in the reference window and the shape parameter is calculated using the empirical formula related to the scale parameter. Considering that the detection process of skywave radar is performed in the range Doppler (RD) map, a cross-shape window with greatest-of method is applied in this paper. The superiority of the proposed CFAR detector, which is applicable to the nonstationary and heterogenous Weibull distributed clutter, is investigated and verified by simulations and experimental data.