Eduard Muslimov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Eduard Muslimov has a total of 252 co-authors. Here are the top co-authors by number of shared publications:
- Nadezhda Konstantinovna Pavlycheva
Kazan National Research Technical University named after A. N. Tupolev—KAI, Kazan, Russia
20 shared publications Emmanuel Hugot
Aix Marseille Univ, CNRS, CNES, LAM, Marseille, France
18 shared publicationsMarc Ferrari
Aix Marseille University, CNRS, CNES, LAM, Marseille, France
11 shared publicationsSimona Lombardo
Aix Marseille Univ, CNRS, CNES, LAM, Marseille, France
10 shared publicationsThibault Behaghel
Aix Marseille Univ, CNRS, CNES, LAM, Marseille, France
7 shared publications- Oleg Gennadievich Morozov
Казанский национальный исследовательский технический университет им. А.Н. Туполева-КАИ
6 shared publications
Latest Publications
- Open Access
- 15 October 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 714, A286
On-sky demonstration of a vector Zernike wavefront sensor in a cascaded adaptive optics system
Context. Future high-contrast instruments aim to directly image and characterise Earth-like exoplanets. Achieving the required contrast requires exquisite image quality, and in particular a high-performance correction of the optical aberrations. Hence, future instruments will use adaptive optics (AO) systems operating at increasingly high loop frequencies in order to reduce temporal errors. However, increasing the loop frequency decreases the number of photons available per wavefront-sensor frame, motivating the use of highly sensitive wavefront sensors. Among the available concepts, the Zernike wavefront sensor (ZWFS) approaches the theoretical sensitivity limit of Fourier-filtering wavefront sensors. To extend the limited dynamic range of the classical ZWFS, the vector ZWFS (v-ZWFS) has been proposed as an alternative solution to mitigate this limitation. Although ZWFSs have already been employed for non-common-path aberration compensation and segment phasing, they have not yet been demonstrated in an on-sky closed-loop AO system. Aims. We aim to demonstrate the operation as well as the performance of a ZWFS in an on-sky AO loop and to evaluate its potential as a second-stage wavefront sensor in a cascaded AO architecture. Methods. We implemented a second-stage AO system, named OZIRIIS, on the PAPYRUS AO platform installed on the 1.52 m telescope of the Observatoire de Haute-Provence. OZIRIIS combines a v-ZWFS and a 97-actuator deformable mirror operating at 400 Hz downstream of the first-stage, pyramid-based AO system. We used one single ZWFS signal for real-time control. The full v-ZWFS was only used a posteriori to analyse the telemetry. We developed a complete calibration strategy based on a numerical model of the sensor to generate synthetic reference signals and interaction matrices for both laboratory and on-sky operation. The performance of the system was assessed through point spread function (PSF) image analysis and wavefront sensor telemetry and was then compared with simulations using a numerical twin of the bench. Results. We present the on-sky demonstration of a v-ZWFS operating within an AO system, together with on-sky closed-loop results obtained using one of the ZWFS signals for real-time control. The second-stage correction provides an improvement in the measured Strehl ratio (SR) of up to 16 percentage points during the observing night presented here. The analysis of the telemetry using the full v-ZWFS to reconstruct residuals reveals the optical-gain effects affecting the ZWFS at a low SR. This demonstrates that the v-ZWFS can improve the dynamic range and performance of the ZWFS in regimes with larger aberrations. We show that an accurate model of the sensor enables the generation of synthetic reference signals and interaction matrices suitable for on-sky operation. We further show that the observed behaviour is consistent with numerical simulations and that the impact of optical gain can be quantified directly from the telemetry.
- 15 October 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 714, A286
Open AccessOn-sky demonstration of a vector Zernike wavefront sensor in a cascaded adaptive optics system
Context. Future high-contrast instruments aim to directly image and characterise Earth-like exoplanets. Achieving the required contrast requires exquisite image quality, and in particular a high-performance correction of the optical aberrations. Hence, future instruments will use adaptive optics (AO) systems operating at increasingly high loop frequencies in order to reduce temporal errors. However, increasing the loop frequency decreases the number of photons available per wavefront-sensor frame, motivating the use of highly sensitive wavefront sensors. Among the available concepts, the Zernike wavefront sensor (ZWFS) approaches the theoretical sensitivity limit of Fourier-filtering wavefront sensors. To extend the limited dynamic range of the classical ZWFS, the vector ZWFS (v-ZWFS) has been proposed as an alternative solution to mitigate this limitation. Although ZWFSs have already been employed for non-common-path aberration compensation and segment phasing, they have not yet been demonstrated in an on-sky closed-loop AO system. Aims. We aim to demonstrate the operation as well as the performance of a ZWFS in an on-sky AO loop and to evaluate its potential as a second-stage wavefront sensor in a cascaded AO architecture. Methods. We implemented a second-stage AO system, named OZIRIIS, on the PAPYRUS AO platform installed on the 1.52 m telescope of the Observatoire de Haute-Provence. OZIRIIS combines a v-ZWFS and a 97-actuator deformable mirror operating at 400 Hz downstream of the first-stage, pyramid-based AO system. We used one single ZWFS signal for real-time control. The full v-ZWFS was only used a posteriori to analyse the telemetry. We developed a complete calibration strategy based on a numerical model of the sensor to generate synthetic reference signals and interaction matrices for both laboratory and on-sky operation. The performance of the system was assessed through point spread function (PSF) image analysis and wavefront sensor telemetry and was then compared with simulations using a numerical twin of the bench. Results. We present the on-sky demonstration of a v-ZWFS operating within an AO system, together with on-sky closed-loop results obtained using one of the ZWFS signals for real-time control. The second-stage correction provides an improvement in the measured Strehl ratio (SR) of up to 16 percentage points during the observing night presented here. The analysis of the telemetry using the full v-ZWFS to reconstruct residuals reveals the optical-gain effects affecting the ZWFS at a low SR. This demonstrates that the v-ZWFS can improve the dynamic range and performance of the ZWFS in regimes with larger aberrations. We show that an accurate model of the sensor enables the generation of synthetic reference signals and interaction matrices suitable for on-sky operation. We further show that the observed behaviour is consistent with numerical simulations and that the impact of optical gain can be quantified directly from the telemetry.
- Open Access
Wave Aberration Correction Algorithm for Unobscured Two-Mirror Telescope Designs
In the present work, we propose a simple analytical algorithm for unobscured two-mirror telescope designs. It is based on fitting of the closest aberration-free surface for each field position and allows for computation of the wave aberration distribution over a large aperture. All the equations necessary for the algorithm implementation are expressed in a general form allowing its application for complex freeform mirrors. It is shown using the example of a small telescope with mm, and field of view, that the algorithm allows us to find a good starting point, and reach a high spatial resolution in comparison with off-axis Ritchey–Chrétien and Schiefspiegler telescopes. The algorithm can be of a specific interest for the development of highly specialized imaging systems of several types.Open AccessWave Aberration Correction Algorithm for Unobscured Two-Mirror Telescope Designs
In the present work, we propose a simple analytical algorithm for unobscured two-mirror telescope designs. It is based on fitting of the closest aberration-free surface for each field position and allows for computation of the wave aberration distribution over a large aperture. All the equations necessary for the algorithm implementation are expressed in a general form allowing its application for complex freeform mirrors. It is shown using the example of a small telescope with mm, and field of view, that the algorithm allows us to find a good starting point, and reach a high spatial resolution in comparison with off-axis Ritchey–Chrétien and Schiefspiegler telescopes. The algorithm can be of a specific interest for the development of highly specialized imaging systems of several types. - Open Access
- 13 March 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 707, L13
Eccentric and cool: A high-spectral-resolution view of 51 Eri b with VLT/HiRISE
Discovered almost ten years ago, the giant planet 51 Eridani b is one of the least separated (≈0.2″) and faintest ( J ≈ 19.74 mag) directly imaged exoplanets known to date. Its atmospheric properties have been thoroughly investigated through low- and medium-resolution spectroscopic observations, enabling the robust characterization of the planet’s bulk parameters. However, the planet’s intrinsically high contrast renders high-resolution spectroscopic observations difficult, despite their potential to yield key measurements essential for a more comprehensive characterization. This study sought to constrain the planet’s radial velocity, enabling a full 3D orbital solution when integrated with previous measurements. We obtained four high-contrast, high-resolution ( R ≈ 140 000) spectroscopic datasets of the planet, collected over a two-year interval with the HiRISE visitor instrument at the VLT to derive the planet’s radial velocity. Using self-consistent models of atmosphere, we were able to derive the radial velocity of the planet at each of the four epochs. These radial-velocity measurements were then used in combination with all existing relative astrometry in order to constrain the orbit of the planet. Our radial velocity measurements allowed us to break the degeneracy along the line of sight, making the unambiguous interpretation of the phase curve of the companion possible. We further constrained the orbital parameters, and particularly the eccentricity, for which we derive e = 0.55 +0.03 −0.07 . The relatively high eccentricity indicates that the system has experienced dynamical interactions induced by an external perturber. We place constraints on the mass and semimajor axis of a hypothetical, unseen outer planet capable of producing the observed high eccentricities.
- 13 March 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 707, L13
Open AccessEccentric and cool: A high-spectral-resolution view of 51 Eri b with VLT/HiRISE
Discovered almost ten years ago, the giant planet 51 Eridani b is one of the least separated (≈0.2″) and faintest ( J ≈ 19.74 mag) directly imaged exoplanets known to date. Its atmospheric properties have been thoroughly investigated through low- and medium-resolution spectroscopic observations, enabling the robust characterization of the planet’s bulk parameters. However, the planet’s intrinsically high contrast renders high-resolution spectroscopic observations difficult, despite their potential to yield key measurements essential for a more comprehensive characterization. This study sought to constrain the planet’s radial velocity, enabling a full 3D orbital solution when integrated with previous measurements. We obtained four high-contrast, high-resolution ( R ≈ 140 000) spectroscopic datasets of the planet, collected over a two-year interval with the HiRISE visitor instrument at the VLT to derive the planet’s radial velocity. Using self-consistent models of atmosphere, we were able to derive the radial velocity of the planet at each of the four epochs. These radial-velocity measurements were then used in combination with all existing relative astrometry in order to constrain the orbit of the planet. Our radial velocity measurements allowed us to break the degeneracy along the line of sight, making the unambiguous interpretation of the phase curve of the companion possible. We further constrained the orbital parameters, and particularly the eccentricity, for which we derive e = 0.55 +0.03 −0.07 . The relatively high eccentricity indicates that the system has experienced dynamical interactions induced by an external perturber. We place constraints on the mass and semimajor axis of a hypothetical, unseen outer planet capable of producing the observed high eccentricities.
- 1 March 2025
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 64 (03) , 035102-15
Experimental study of the first telescope with a toroidal curved detector
We describe a practical implementation of the anamorphically curved detector concept. To demonstrate its advantages, a telescope lab prototype was developed, built, and tested. It is based on a four-mirror all-spherical unobscured design, similar to that proposed by D. Shafer. The telescope is open at F/#=5.5, and its extended field of view is 10.6 deg× 8 deg. We explore the design parameter space to demonstrate the change in gain introduced by the curved detector and to substantiate the chosen parameters. If the image surface is curved to the shape of a toroid, the image quality reaches the diffraction limit over the entire field by design. The design was optimized to use standard concave spherical mirrors. The detector was curved down toroidally with an exquisite surface precision of ≈11-μm peak-to-valley. The experimental tests of the prototype have shown that the use of the toroidally curved detector allows to increase the contrast in the field corner by ≈0.3 units, which is in good agreement with the modeling results. We also propose a few prospective applications of the demonstrated concept.
- 1 March 2025
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 64 (03) , 035102-15
Experimental study of the first telescope with a toroidal curved detector
We describe a practical implementation of the anamorphically curved detector concept. To demonstrate its advantages, a telescope lab prototype was developed, built, and tested. It is based on a four-mirror all-spherical unobscured design, similar to that proposed by D. Shafer. The telescope is open at F/#=5.5, and its extended field of view is 10.6 deg× 8 deg. We explore the design parameter space to demonstrate the change in gain introduced by the curved detector and to substantiate the chosen parameters. If the image surface is curved to the shape of a toroid, the image quality reaches the diffraction limit over the entire field by design. The design was optimized to use standard concave spherical mirrors. The detector was curved down toroidally with an exquisite surface precision of ≈11-μm peak-to-valley. The experimental tests of the prototype have shown that the use of the toroidally curved detector allows to increase the contrast in the field corner by ≈0.3 units, which is in good agreement with the modeling results. We also propose a few prospective applications of the demonstrated concept.
- 1 September 2024
- Published by Pleiades Publishing Ltd in Astrophysical Bulletin
- Vol. 79 (3) , 525-534
A Prototype Slitless Spectrograph with a Composite Grism
We report the results of laboratory studies of the main optical properties of the slitless spectrograph developed for a small telescope with a 0.5 m-diameter primary mirror and a focal ratio of \(1:6.8\). The spectrograph operates in the 450–950 nm wavelength interval and has a field of \(35\overset{\prime}{.}6\times 7\overset{\prime}{.}2\). Its distinctive feature is the use of a composite grism subdivided into two subapertures with independently optimized parameters. Measurements show that the use of such a grism makes it possible to achieve a spectral resolving power \(R\) from 461 to 1041 with the grating diffraction efficiency as high as 45\(\%\). We demonstrate that our solution provides better optical characteristics compared to the classical grism and that our measurements agree well with the results of modeling.- 1 September 2024
- Published by Pleiades Publishing Ltd in Astrophysical Bulletin
- Vol. 79 (3) , 525-534
A Prototype Slitless Spectrograph with a Composite Grism
We report the results of laboratory studies of the main optical properties of the slitless spectrograph developed for a small telescope with a 0.5 m-diameter primary mirror and a focal ratio of \(1:6.8\). The spectrograph operates in the 450–950 nm wavelength interval and has a field of \(35\overset{\prime}{.}6\times 7\overset{\prime}{.}2\). Its distinctive feature is the use of a composite grism subdivided into two subapertures with independently optimized parameters. Measurements show that the use of such a grism makes it possible to achieve a spectral resolving power \(R\) from 461 to 1041 with the grating diffraction efficiency as high as 45\(\%\). We demonstrate that our solution provides better optical characteristics compared to the classical grism and that our measurements agree well with the results of modeling.- 1 May 2023
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 90 (5) , 262-270
Comparative analysis of design algorithms for optical systems using composite holographic optical elements
Subject of study. Two algorithms for designing an optical scheme based on a composite hologram optical element aimed at optimizing the diffraction efficiency are presented. The first algorithm is based on the successive partitioning of the hologram element, and the second is based on averaging locally the optimized hologram parameters. Aim of study. The aim of this study is to achieve high and uniform diffraction efficiency in the working spectral range using design and modeling techniques to determine the parameters of a composite hologram. This is realized by selecting the optimal configuration of the composite hologram and its parameters in each sub-aperture. Methods. The algorithms are based on the application of the Welford equation for ray tracing through a hologram and Kogelnik theory for simultaneous calculation of diffraction efficiency in several sub-apertures. Main results. As a demonstrative example, the design and analysis of a spectrograph optical scheme operating in the near-infrared region with a high angular dispersion are presented. A diverging beam with a numerical aperture of 0.14 is fed to the input of the spectrograph. The spectrograph operates in the wavelength range from 830 to 870 nm, the center of which corresponds to the emission wavelength of a standard laser source. The optical system comprises a collimator, two volume-phase transmission holographic gratings, a camera lens, and a photodetector. It is shown that the highest gain in diffraction efficiency for a composite hologram comprising three rectangular sub-apertures reaches 5.1 times that of a single hologram grating without parameter optimization, observed at the long-wavelength edge of the spectrum. Practical significance. The proposed algorithms will allow one to determine the optimal number, shape, and location of composite hologram sub-apertures. The obtained results will make it possible to design a spectrograph characterized by an increased and more uniform image brightness over the entire working range.
- 1 May 2023
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 90 (5) , 262-270
Comparative analysis of design algorithms for optical systems using composite holographic optical elements
Subject of study. Two algorithms for designing an optical scheme based on a composite hologram optical element aimed at optimizing the diffraction efficiency are presented. The first algorithm is based on the successive partitioning of the hologram element, and the second is based on averaging locally the optimized hologram parameters. Aim of study. The aim of this study is to achieve high and uniform diffraction efficiency in the working spectral range using design and modeling techniques to determine the parameters of a composite hologram. This is realized by selecting the optimal configuration of the composite hologram and its parameters in each sub-aperture. Methods. The algorithms are based on the application of the Welford equation for ray tracing through a hologram and Kogelnik theory for simultaneous calculation of diffraction efficiency in several sub-apertures. Main results. As a demonstrative example, the design and analysis of a spectrograph optical scheme operating in the near-infrared region with a high angular dispersion are presented. A diverging beam with a numerical aperture of 0.14 is fed to the input of the spectrograph. The spectrograph operates in the wavelength range from 830 to 870 nm, the center of which corresponds to the emission wavelength of a standard laser source. The optical system comprises a collimator, two volume-phase transmission holographic gratings, a camera lens, and a photodetector. It is shown that the highest gain in diffraction efficiency for a composite hologram comprising three rectangular sub-apertures reaches 5.1 times that of a single hologram grating without parameter optimization, observed at the long-wavelength edge of the spectrum. Practical significance. The proposed algorithms will allow one to determine the optimal number, shape, and location of composite hologram sub-apertures. The obtained results will make it possible to design a spectrograph characterized by an increased and more uniform image brightness over the entire working range.
- Open Access
Optical Design of a Slitless Astronomical Spectrograph with a Composite Holographic Grism
In the present work, we consider an optical design of a slitless spectrograph for an existing 0.5 m-class telescope. This design concept has a number of advantages such as compact size, simplicity, and simultaneous coverage of a large field of view. A challenge with this design is correcting aberrations caused by placing a dispersing element in a converging beam. To overcome this issue, we propose to use a composite grism, which represents a combination of a prism and a volume-phase holographic grating, the latter which is split into zones with independently optimized parameters. We demonstrate two designs of such a grism. In both designs, the spectrograph operates in the range of 450–950 nm in an beam and covers a field of view of 35.6 × 7.2. Through advanced modeling, it is shown that a composite grism having four rectangular zones with different thickness and index modulation depth of the hologram and recorded with an auxiliary deformable mirror decreases the astigmatic elongation by a factor of 85, increases the spectral resolving power by 4.4 times, and reaches while increasing the average diffraction efficiency by a factor of . If we reduce the number of zones to only two, replace the deformable mirror with two static corrector plates, and fix the hologram thickness, the corresponding performance gains still remain high: the astigmatism is reduced by a factor of 61, the spectral resolving power is up to times higher, reaching , and the efficiency is increased by a factor of . This shows that the proposed design allows the construction of a simple and compact instrument, providing high performance over the entire field of view and spectral range.Open AccessOptical Design of a Slitless Astronomical Spectrograph with a Composite Holographic Grism
In the present work, we consider an optical design of a slitless spectrograph for an existing 0.5 m-class telescope. This design concept has a number of advantages such as compact size, simplicity, and simultaneous coverage of a large field of view. A challenge with this design is correcting aberrations caused by placing a dispersing element in a converging beam. To overcome this issue, we propose to use a composite grism, which represents a combination of a prism and a volume-phase holographic grating, the latter which is split into zones with independently optimized parameters. We demonstrate two designs of such a grism. In both designs, the spectrograph operates in the range of 450–950 nm in an beam and covers a field of view of 35.6 × 7.2. Through advanced modeling, it is shown that a composite grism having four rectangular zones with different thickness and index modulation depth of the hologram and recorded with an auxiliary deformable mirror decreases the astigmatic elongation by a factor of 85, increases the spectral resolving power by 4.4 times, and reaches while increasing the average diffraction efficiency by a factor of . If we reduce the number of zones to only two, replace the deformable mirror with two static corrector plates, and fix the hologram thickness, the corresponding performance gains still remain high: the astigmatism is reduced by a factor of 61, the spectral resolving power is up to times higher, reaching , and the efficiency is increased by a factor of . This shows that the proposed design allows the construction of a simple and compact instrument, providing high performance over the entire field of view and spectral range. - Open Access
- 1 December 2022
- Published by ITMO University in Scientific and Technical Journal of Information Technologies, Mechanics and Optics
- Vol. 22 (6) , 1037
Modelling of a composite waveguide holographic display
Optical designs of waveguide-type augmented reality displays are investigated. Displays based on volume phase holograms are notable for their small size, large exit pupil and high transmittance both in the projected image channel and in the direct vision channel. However, with an increase of the aperture, field of view and working spectral range, the spread of the values of the beam angle of incidence and the wavelength increases when solving the diffraction problem at different points on the hologram surface which imposes restrictions on spatial resolution and diffraction efficiency. To overcome this phenomenon, it is proposed to use a composite hologram which represents a volume phase grating divided into zones with independently varying parameters of the fringes tilt, their shape, the holographic layer thickness and the refraction index modulation depth. We propose an algorithm that allows ray tracing through a hologram recorded by two coherent point sources using an auxiliary aspherical mirror. The initial ray tracing in the hologram recording scheme is performed using the error function minimization by the orthogonal descent and golden section methods. Based on the results obtained, the directional vectors of the diffracted beam are calculated using the Welford equation. Using the tracing results, the hologram diffraction efficiency is computed with the Kogelnik’s coupled wave theory. The proposed algorithms are implemented in the Zemax Optics Studio software. The application of the proposed composite hologram element and the tools for operation modeling are shown on an example of display operating in the range of 510–530 nm with the field of view of 7°36ʹ × 5°48ʹ and the exit pupil diameter of 8 mm. It is shown that the proposed solutions make it possible to increase the diffraction efficiency by 3.45 times. At the same time, the spatial resolution increases by 12.7 % varying across the field of view in the range of 0ʹ44ʺ–1ʹ6ʺ. The use of composite holograms allows one to create displays with higher spatial resolution and brightness of the projected image as well as uniformity of the characteristics across the field of view.
- 1 December 2022
- Published by ITMO University in Scientific and Technical Journal of Information Technologies, Mechanics and Optics
- Vol. 22 (6) , 1037
Open AccessModelling of a composite waveguide holographic display
Optical designs of waveguide-type augmented reality displays are investigated. Displays based on volume phase holograms are notable for their small size, large exit pupil and high transmittance both in the projected image channel and in the direct vision channel. However, with an increase of the aperture, field of view and working spectral range, the spread of the values of the beam angle of incidence and the wavelength increases when solving the diffraction problem at different points on the hologram surface which imposes restrictions on spatial resolution and diffraction efficiency. To overcome this phenomenon, it is proposed to use a composite hologram which represents a volume phase grating divided into zones with independently varying parameters of the fringes tilt, their shape, the holographic layer thickness and the refraction index modulation depth. We propose an algorithm that allows ray tracing through a hologram recorded by two coherent point sources using an auxiliary aspherical mirror. The initial ray tracing in the hologram recording scheme is performed using the error function minimization by the orthogonal descent and golden section methods. Based on the results obtained, the directional vectors of the diffracted beam are calculated using the Welford equation. Using the tracing results, the hologram diffraction efficiency is computed with the Kogelnik’s coupled wave theory. The proposed algorithms are implemented in the Zemax Optics Studio software. The application of the proposed composite hologram element and the tools for operation modeling are shown on an example of display operating in the range of 510–530 nm with the field of view of 7°36ʹ × 5°48ʹ and the exit pupil diameter of 8 mm. It is shown that the proposed solutions make it possible to increase the diffraction efficiency by 3.45 times. At the same time, the spatial resolution increases by 12.7 % varying across the field of view in the range of 0ʹ44ʺ–1ʹ6ʺ. The use of composite holograms allows one to create displays with higher spatial resolution and brightness of the projected image as well as uniformity of the characteristics across the field of view.
- 1 October 2022
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 89 (10) , 633-641
Modeling and optimization of optical designs with composite holographic elements
Subject of study. Optical designs based on composite holographic elements composed of several zones with independently optimized parameters are investigated in this study. Aim of study. Generalized methods for the design and modeling of schemes for the determination of the parameters of the composite hologram and the characteristics of the optical design obtained using this hologram are considered. Method. The methods are based on using the Welford equation and Kogelnik’s theory for the simultaneous calculation of aberrations and diffraction efficiency in several zones. Main results. An optical design of an augmented reality holographic display of the waveguide type operating in the range of 480–620 nm with a field of view of 8∘×6∘ and an exit pupil of 8 mm is presented as a test case. An increase in the minimum diffraction efficiency over the field of view by 13.8% and a reduction in the angular size of the spot diagram by 0.4′ owing to the use of the proposed methods are demonstrated for a holographic element divided into four zones. The visual effect of using such an element in the display scheme is also demonstrated. Practical significance. The obtained results enable new optical systems with enhanced and more uniform brightness and spatial resolution of the formed image, increased field of view, and extended operating spectral range to be designed.
- 1 October 2022
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 89 (10) , 633-641
Modeling and optimization of optical designs with composite holographic elements
Subject of study. Optical designs based on composite holographic elements composed of several zones with independently optimized parameters are investigated in this study. Aim of study. Generalized methods for the design and modeling of schemes for the determination of the parameters of the composite hologram and the characteristics of the optical design obtained using this hologram are considered. Method. The methods are based on using the Welford equation and Kogelnik’s theory for the simultaneous calculation of aberrations and diffraction efficiency in several zones. Main results. An optical design of an augmented reality holographic display of the waveguide type operating in the range of 480–620 nm with a field of view of 8∘×6∘ and an exit pupil of 8 mm is presented as a test case. An increase in the minimum diffraction efficiency over the field of view by 13.8% and a reduction in the angular size of the spot diagram by 0.4′ owing to the use of the proposed methods are demonstrated for a holographic element divided into four zones. The visual effect of using such an element in the display scheme is also demonstrated. Practical significance. The obtained results enable new optical systems with enhanced and more uniform brightness and spatial resolution of the formed image, increased field of view, and extended operating spectral range to be designed.
- Open Access
- 27 April 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (9) , 4427
Digital Holographic Positioning Sensor for a Small Deployable Space Telescope
We propose a system and a technique to measure misalignments of individual optical elements in a deployable telescope for a small satellite, and we demonstrate its application for a 2230 mm F10.3 Ritchey–Chretien type telescope. The system uses laser point sources at the edge of each of the deploying segments to form an interference pattern at the telescope image sensor. By processing the interferograms in the Fourier domain and comparing them to the computed ones, it becomes possible to measure the position of the primary mirror segments with a precision of m and the axial displacement of the secondary mirror with the precision of nm. Such a system would allow to build a deployable telescope fitting in a 1U CubeSat and align it in space with a sufficient accuracy, thus providing a gain in collecting power, reaching a factor of 2.49 with respect to a single mirror telescope fitting on a 1U CubeSat.- 27 April 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (9) , 4427
Open AccessDigital Holographic Positioning Sensor for a Small Deployable Space Telescope
We propose a system and a technique to measure misalignments of individual optical elements in a deployable telescope for a small satellite, and we demonstrate its application for a 2230 mm F10.3 Ritchey–Chretien type telescope. The system uses laser point sources at the edge of each of the deploying segments to form an interference pattern at the telescope image sensor. By processing the interferograms in the Fourier domain and comparing them to the computed ones, it becomes possible to measure the position of the primary mirror segments with a precision of m and the axial displacement of the secondary mirror with the precision of nm. Such a system would allow to build a deployable telescope fitting in a 1U CubeSat and align it in space with a sufficient accuracy, thus providing a gain in collecting power, reaching a factor of 2.49 with respect to a single mirror telescope fitting on a 1U CubeSat.