Rakesh K. Hooda
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rakesh K. Hooda has a total of 166 co-authors. Here are the top co-authors by number of shared publications:
Antti-Pekka Hyvärinen
Finnish Meteorological Institute, Helsinki, FI-00560, Finland
11 shared publications- Vijay Punjaji Kanawade
Climate and Atmosphere Research Center (CARE-C), The Cyprus Institute, Nicosia, Cyprus
10 shared publications - Aki Virkkula
Finnish Meteorological Institute (FMI), Erik Palménin aukio 1, 00560, Helsinki, Finland
9 shared publications - Chandan Sarangi
Department of Civil Engineering, Indian Institute of Technology Madras, Chennai, 600036, India
9 shared publications - Bhishma Tyagi
Department of Earth and Atmospheric Sciences, National Institute of Technology Rourkela, Rourkela, India
7 shared publications Harendra S. Negi
Defence Geoinformatics Research Establishment, Chandigarh, 160036, India
7 shared publications
Latest Publications
- Open Access
- 18 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-41
Reply on RC4
A polluted dust episode over the western Himalaya was characterized using in situ optical measurements, size-resolved aerosol sampling, single-particle analysis, and spectroscopic techniques. During the event, coarse-mode mass increased substantially, accompanied by elevated fine-mode particle number and black carbon concentrations. In situ observations revealed a threefold enhancement in the scattering coefficient and a 2–2.5-fold increase in the absorption coefficient relative to background conditions. Beyond these extrinsic property changes, intrinsic optical properties shifted markedly. Single scattering albedo and scattering Ångström exponent increased, and absorption Ångström exponent decreased, indicating compositional changes toward dust dominance with embedded anthropogenic absorbing aerosols. Single-particle analysis confirmed internal mixing of Fe-bearing mineral dust with carbonaceous material and secondary inorganic species. These compositional and morphological changes were reflected in the refractive index, which increased by approximately 4–6 % in the real part and 30–35 % in the imaginary part across visible wavelengths. The results demonstrate that polluted dust differs fundamentally from pure mineral dust and exhibits enhanced optical efficiency per unit mass and altered aerosol radiation interactions due to chemical transformation during transport. Accurate representation of such region-specific intrinsic properties is essential for quantifying aerosol radiative effects and boundary-layer interactions over the Himalayas.
- 18 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-41
Open AccessReply on RC4
A polluted dust episode over the western Himalaya was characterized using in situ optical measurements, size-resolved aerosol sampling, single-particle analysis, and spectroscopic techniques. During the event, coarse-mode mass increased substantially, accompanied by elevated fine-mode particle number and black carbon concentrations. In situ observations revealed a threefold enhancement in the scattering coefficient and a 2–2.5-fold increase in the absorption coefficient relative to background conditions. Beyond these extrinsic property changes, intrinsic optical properties shifted markedly. Single scattering albedo and scattering Ångström exponent increased, and absorption Ångström exponent decreased, indicating compositional changes toward dust dominance with embedded anthropogenic absorbing aerosols. Single-particle analysis confirmed internal mixing of Fe-bearing mineral dust with carbonaceous material and secondary inorganic species. These compositional and morphological changes were reflected in the refractive index, which increased by approximately 4–6 % in the real part and 30–35 % in the imaginary part across visible wavelengths. The results demonstrate that polluted dust differs fundamentally from pure mineral dust and exhibits enhanced optical efficiency per unit mass and altered aerosol radiation interactions due to chemical transformation during transport. Accurate representation of such region-specific intrinsic properties is essential for quantifying aerosol radiative effects and boundary-layer interactions over the Himalayas.
- Open Access
- 18 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-41
Reply on RC3
A polluted dust episode over the western Himalaya was characterized using in situ optical measurements, size-resolved aerosol sampling, single-particle analysis, and spectroscopic techniques. During the event, coarse-mode mass increased substantially, accompanied by elevated fine-mode particle number and black carbon concentrations. In situ observations revealed a threefold enhancement in the scattering coefficient and a 2–2.5-fold increase in the absorption coefficient relative to background conditions. Beyond these extrinsic property changes, intrinsic optical properties shifted markedly. Single scattering albedo and scattering Ångström exponent increased, and absorption Ångström exponent decreased, indicating compositional changes toward dust dominance with embedded anthropogenic absorbing aerosols. Single-particle analysis confirmed internal mixing of Fe-bearing mineral dust with carbonaceous material and secondary inorganic species. These compositional and morphological changes were reflected in the refractive index, which increased by approximately 4–6 % in the real part and 30–35 % in the imaginary part across visible wavelengths. The results demonstrate that polluted dust differs fundamentally from pure mineral dust and exhibits enhanced optical efficiency per unit mass and altered aerosol radiation interactions due to chemical transformation during transport. Accurate representation of such region-specific intrinsic properties is essential for quantifying aerosol radiative effects and boundary-layer interactions over the Himalayas.
- 18 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-41
Open AccessReply on RC3
A polluted dust episode over the western Himalaya was characterized using in situ optical measurements, size-resolved aerosol sampling, single-particle analysis, and spectroscopic techniques. During the event, coarse-mode mass increased substantially, accompanied by elevated fine-mode particle number and black carbon concentrations. In situ observations revealed a threefold enhancement in the scattering coefficient and a 2–2.5-fold increase in the absorption coefficient relative to background conditions. Beyond these extrinsic property changes, intrinsic optical properties shifted markedly. Single scattering albedo and scattering Ångström exponent increased, and absorption Ångström exponent decreased, indicating compositional changes toward dust dominance with embedded anthropogenic absorbing aerosols. Single-particle analysis confirmed internal mixing of Fe-bearing mineral dust with carbonaceous material and secondary inorganic species. These compositional and morphological changes were reflected in the refractive index, which increased by approximately 4–6 % in the real part and 30–35 % in the imaginary part across visible wavelengths. The results demonstrate that polluted dust differs fundamentally from pure mineral dust and exhibits enhanced optical efficiency per unit mass and altered aerosol radiation interactions due to chemical transformation during transport. Accurate representation of such region-specific intrinsic properties is essential for quantifying aerosol radiative effects and boundary-layer interactions over the Himalayas.
- Open Access
- 18 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-41
Reply on RC1
A polluted dust episode over the western Himalaya was characterized using in situ optical measurements, size-resolved aerosol sampling, single-particle analysis, and spectroscopic techniques. During the event, coarse-mode mass increased substantially, accompanied by elevated fine-mode particle number and black carbon concentrations. In situ observations revealed a threefold enhancement in the scattering coefficient and a 2–2.5-fold increase in the absorption coefficient relative to background conditions. Beyond these extrinsic property changes, intrinsic optical properties shifted markedly. Single scattering albedo and scattering Ångström exponent increased, and absorption Ångström exponent decreased, indicating compositional changes toward dust dominance with embedded anthropogenic absorbing aerosols. Single-particle analysis confirmed internal mixing of Fe-bearing mineral dust with carbonaceous material and secondary inorganic species. These compositional and morphological changes were reflected in the refractive index, which increased by approximately 4–6 % in the real part and 30–35 % in the imaginary part across visible wavelengths. The results demonstrate that polluted dust differs fundamentally from pure mineral dust and exhibits enhanced optical efficiency per unit mass and altered aerosol radiation interactions due to chemical transformation during transport. Accurate representation of such region-specific intrinsic properties is essential for quantifying aerosol radiative effects and boundary-layer interactions over the Himalayas.
- 18 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-41
Open AccessReply on RC1
A polluted dust episode over the western Himalaya was characterized using in situ optical measurements, size-resolved aerosol sampling, single-particle analysis, and spectroscopic techniques. During the event, coarse-mode mass increased substantially, accompanied by elevated fine-mode particle number and black carbon concentrations. In situ observations revealed a threefold enhancement in the scattering coefficient and a 2–2.5-fold increase in the absorption coefficient relative to background conditions. Beyond these extrinsic property changes, intrinsic optical properties shifted markedly. Single scattering albedo and scattering Ångström exponent increased, and absorption Ångström exponent decreased, indicating compositional changes toward dust dominance with embedded anthropogenic absorbing aerosols. Single-particle analysis confirmed internal mixing of Fe-bearing mineral dust with carbonaceous material and secondary inorganic species. These compositional and morphological changes were reflected in the refractive index, which increased by approximately 4–6 % in the real part and 30–35 % in the imaginary part across visible wavelengths. The results demonstrate that polluted dust differs fundamentally from pure mineral dust and exhibits enhanced optical efficiency per unit mass and altered aerosol radiation interactions due to chemical transformation during transport. Accurate representation of such region-specific intrinsic properties is essential for quantifying aerosol radiative effects and boundary-layer interactions over the Himalayas.
- Open Access
- 20 July 2026
- Published by Copernicus GmbH in EGUsphere
- p. 1-40
A 21-year global dataset of particle number concentrations for aerosol-cloud interaction studies
Aerosol particles larger than roughly 50–100 nm in diameter are climatically important because they can act as cloud condensation nuclei (CCN), making their global number concentrations essential for understanding aerosol–cloud interactions. However, observationally constrained, long-term global datasets of particle number concentrations in this size range remain scarce. In this investigation, we present a global dataset of ground-level particle number concentrations for the period 2003–2024, produced by combining in situ observations with a machine-learning approach. The dataset includes two variables: the number concentrations for particles larger than 100 nm (N100) and larger than 50 nm (N50), provided at 0.75° × 0.75° spatial resolution and daily temporal resolution. To generate this dataset, we trained an eXtreme Gradient Boosting (XGB) model using measurements from 62 in situ stations as targets and reanalysis variables as predictors, enabling a data-driven representation of particle number concentrations at the global scale. We evaluated the dataset against independent observations from 12 additional stations. At 2/3 of these stations, the dataset shows good performance, capturing the median concentrations within a factor of 1.5 from the observations. Furthermore, we describe the main characteristics of the dataset in terms of global spatial patterns, temporal variability, and seasonal cycles, and demonstrate its ability to capture long-term trends in particle number concentrations, including both increasing and decreasing tendencies reported in the literature. This work provides the first observation-constrained, machine-learning-based global dataset of N50 and N100 at daily resolution over two decades, bridging the gap between sparse measurements and computationally expensive process-based models. The dataset, publicly available at https://doi.org/10.5281/zenodo.20202080, offers a valuable resource for evaluating model simulations, improving CCN-related parameterizations, and supporting weather and climate studies without the need for explicit knowledge of the aerosol particle microphysics.
- 20 July 2026
- Published by Copernicus GmbH in EGUsphere
- p. 1-40
Open AccessA 21-year global dataset of particle number concentrations for aerosol-cloud interaction studies
Aerosol particles larger than roughly 50–100 nm in diameter are climatically important because they can act as cloud condensation nuclei (CCN), making their global number concentrations essential for understanding aerosol–cloud interactions. However, observationally constrained, long-term global datasets of particle number concentrations in this size range remain scarce. In this investigation, we present a global dataset of ground-level particle number concentrations for the period 2003–2024, produced by combining in situ observations with a machine-learning approach. The dataset includes two variables: the number concentrations for particles larger than 100 nm (N100) and larger than 50 nm (N50), provided at 0.75° × 0.75° spatial resolution and daily temporal resolution. To generate this dataset, we trained an eXtreme Gradient Boosting (XGB) model using measurements from 62 in situ stations as targets and reanalysis variables as predictors, enabling a data-driven representation of particle number concentrations at the global scale. We evaluated the dataset against independent observations from 12 additional stations. At 2/3 of these stations, the dataset shows good performance, capturing the median concentrations within a factor of 1.5 from the observations. Furthermore, we describe the main characteristics of the dataset in terms of global spatial patterns, temporal variability, and seasonal cycles, and demonstrate its ability to capture long-term trends in particle number concentrations, including both increasing and decreasing tendencies reported in the literature. This work provides the first observation-constrained, machine-learning-based global dataset of N50 and N100 at daily resolution over two decades, bridging the gap between sparse measurements and computationally expensive process-based models. The dataset, publicly available at https://doi.org/10.5281/zenodo.20202080, offers a valuable resource for evaluating model simulations, improving CCN-related parameterizations, and supporting weather and climate studies without the need for explicit knowledge of the aerosol particle microphysics.
- Open Access
- 20 July 2026
- Published by Copernicus GmbH
Supplementary material to "A 21-year global dataset of particle number concentrations for aerosol-cloud interaction studies"
- 20 July 2026
- Published by Copernicus GmbH
Open AccessSupplementary material to "A 21-year global dataset of particle number concentrations for aerosol-cloud interaction studies"
- Open Access
- 20 May 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-41
Comment on egusphere-2026-424
A polluted dust episode over the western Himalaya was characterized using in situ optical measurements, size-resolved aerosol sampling, single-particle analysis, and spectroscopic techniques. During the event, coarse-mode mass increased substantially, accompanied by elevated fine-mode particle number and black carbon concentrations. In situ observations revealed a threefold enhancement in the scattering coefficient and a 2–2.5-fold increase in the absorption coefficient relative to background conditions. Beyond these extrinsic property changes, intrinsic optical properties shifted markedly. Single scattering albedo and scattering Ångström exponent increased, and absorption Ångström exponent decreased, indicating compositional changes toward dust dominance with embedded anthropogenic absorbing aerosols. Single-particle analysis confirmed internal mixing of Fe-bearing mineral dust with carbonaceous material and secondary inorganic species. These compositional and morphological changes were reflected in the refractive index, which increased by approximately 4–6 % in the real part and 30–35 % in the imaginary part across visible wavelengths. The results demonstrate that polluted dust differs fundamentally from pure mineral dust and exhibits enhanced optical efficiency per unit mass and altered aerosol radiation interactions due to chemical transformation during transport. Accurate representation of such region-specific intrinsic properties is essential for quantifying aerosol radiative effects and boundary-layer interactions over the Himalayas.
- 20 May 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-41
Open AccessComment on egusphere-2026-424
A polluted dust episode over the western Himalaya was characterized using in situ optical measurements, size-resolved aerosol sampling, single-particle analysis, and spectroscopic techniques. During the event, coarse-mode mass increased substantially, accompanied by elevated fine-mode particle number and black carbon concentrations. In situ observations revealed a threefold enhancement in the scattering coefficient and a 2–2.5-fold increase in the absorption coefficient relative to background conditions. Beyond these extrinsic property changes, intrinsic optical properties shifted markedly. Single scattering albedo and scattering Ångström exponent increased, and absorption Ångström exponent decreased, indicating compositional changes toward dust dominance with embedded anthropogenic absorbing aerosols. Single-particle analysis confirmed internal mixing of Fe-bearing mineral dust with carbonaceous material and secondary inorganic species. These compositional and morphological changes were reflected in the refractive index, which increased by approximately 4–6 % in the real part and 30–35 % in the imaginary part across visible wavelengths. The results demonstrate that polluted dust differs fundamentally from pure mineral dust and exhibits enhanced optical efficiency per unit mass and altered aerosol radiation interactions due to chemical transformation during transport. Accurate representation of such region-specific intrinsic properties is essential for quantifying aerosol radiative effects and boundary-layer interactions over the Himalayas.
- Open Access
- 6 April 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-41
Reply on RC1
A polluted dust episode over the western Himalaya was characterized using in situ optical measurements, size-resolved aerosol sampling, single-particle analysis, and spectroscopic techniques. During the event, coarse-mode mass increased substantially, accompanied by elevated fine-mode particle number and black carbon concentrations. In situ observations revealed a threefold enhancement in the scattering coefficient and a 2–2.5-fold increase in the absorption coefficient relative to background conditions. Beyond these extrinsic property changes, intrinsic optical properties shifted markedly. Single scattering albedo and scattering Ångström exponent increased, and absorption Ångström exponent decreased, indicating compositional changes toward dust dominance with embedded anthropogenic absorbing aerosols. Single-particle analysis confirmed internal mixing of Fe-bearing mineral dust with carbonaceous material and secondary inorganic species. These compositional and morphological changes were reflected in the refractive index, which increased by approximately 4–6 % in the real part and 30–35 % in the imaginary part across visible wavelengths. The results demonstrate that polluted dust differs fundamentally from pure mineral dust and exhibits enhanced optical efficiency per unit mass and altered aerosol radiation interactions due to chemical transformation during transport. Accurate representation of such region-specific intrinsic properties is essential for quantifying aerosol radiative effects and boundary-layer interactions over the Himalayas.
- 6 April 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-41
Open AccessReply on RC1
A polluted dust episode over the western Himalaya was characterized using in situ optical measurements, size-resolved aerosol sampling, single-particle analysis, and spectroscopic techniques. During the event, coarse-mode mass increased substantially, accompanied by elevated fine-mode particle number and black carbon concentrations. In situ observations revealed a threefold enhancement in the scattering coefficient and a 2–2.5-fold increase in the absorption coefficient relative to background conditions. Beyond these extrinsic property changes, intrinsic optical properties shifted markedly. Single scattering albedo and scattering Ångström exponent increased, and absorption Ångström exponent decreased, indicating compositional changes toward dust dominance with embedded anthropogenic absorbing aerosols. Single-particle analysis confirmed internal mixing of Fe-bearing mineral dust with carbonaceous material and secondary inorganic species. These compositional and morphological changes were reflected in the refractive index, which increased by approximately 4–6 % in the real part and 30–35 % in the imaginary part across visible wavelengths. The results demonstrate that polluted dust differs fundamentally from pure mineral dust and exhibits enhanced optical efficiency per unit mass and altered aerosol radiation interactions due to chemical transformation during transport. Accurate representation of such region-specific intrinsic properties is essential for quantifying aerosol radiative effects and boundary-layer interactions over the Himalayas.
- Open Access
- 5 April 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-41
Comment on egusphere-2026-424
A polluted dust episode over the western Himalaya was characterized using in situ optical measurements, size-resolved aerosol sampling, single-particle analysis, and spectroscopic techniques. During the event, coarse-mode mass increased substantially, accompanied by elevated fine-mode particle number and black carbon concentrations. In situ observations revealed a threefold enhancement in the scattering coefficient and a 2–2.5-fold increase in the absorption coefficient relative to background conditions. Beyond these extrinsic property changes, intrinsic optical properties shifted markedly. Single scattering albedo and scattering Ångström exponent increased, and absorption Ångström exponent decreased, indicating compositional changes toward dust dominance with embedded anthropogenic absorbing aerosols. Single-particle analysis confirmed internal mixing of Fe-bearing mineral dust with carbonaceous material and secondary inorganic species. These compositional and morphological changes were reflected in the refractive index, which increased by approximately 4–6 % in the real part and 30–35 % in the imaginary part across visible wavelengths. The results demonstrate that polluted dust differs fundamentally from pure mineral dust and exhibits enhanced optical efficiency per unit mass and altered aerosol radiation interactions due to chemical transformation during transport. Accurate representation of such region-specific intrinsic properties is essential for quantifying aerosol radiative effects and boundary-layer interactions over the Himalayas.
- 5 April 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-41
Open AccessComment on egusphere-2026-424
A polluted dust episode over the western Himalaya was characterized using in situ optical measurements, size-resolved aerosol sampling, single-particle analysis, and spectroscopic techniques. During the event, coarse-mode mass increased substantially, accompanied by elevated fine-mode particle number and black carbon concentrations. In situ observations revealed a threefold enhancement in the scattering coefficient and a 2–2.5-fold increase in the absorption coefficient relative to background conditions. Beyond these extrinsic property changes, intrinsic optical properties shifted markedly. Single scattering albedo and scattering Ångström exponent increased, and absorption Ångström exponent decreased, indicating compositional changes toward dust dominance with embedded anthropogenic absorbing aerosols. Single-particle analysis confirmed internal mixing of Fe-bearing mineral dust with carbonaceous material and secondary inorganic species. These compositional and morphological changes were reflected in the refractive index, which increased by approximately 4–6 % in the real part and 30–35 % in the imaginary part across visible wavelengths. The results demonstrate that polluted dust differs fundamentally from pure mineral dust and exhibits enhanced optical efficiency per unit mass and altered aerosol radiation interactions due to chemical transformation during transport. Accurate representation of such region-specific intrinsic properties is essential for quantifying aerosol radiative effects and boundary-layer interactions over the Himalayas.
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
Meteorology Induced New Particle Formation over India - A modelling approach
Atmospheric particles strongly influence air quality, climate, and human health, and understanding how new particles form in the atmosphere is essential for improving predictions of these impacts. New particle formation (NPF) is one of the key processes that creates fresh aerosol particles, but its behaviour varies widely across regions and seasons. Winter conditions, with shallow boundary layers and high aerosol loading, usually suppress NPF. However, in Hyderabad, India, we observed frequent winter NPF events that occur despite these unfavourable conditions occurring on about 30% of the days. This study combines long-term particle size distribution measurements with meteorological reanalysis and high-resolution WRF-Chem simulations to investigate the meteorological drivers behind these winter events.Particle number size distributions (10–600 nm) were collected at the University of Hyderabad between 2019 and 2022. Large-scale atmospheric conditions were analysed using ERA-5 and MERRA-2 reanalysis, and a detailed WRF-Chem simulation was conducted for a one-week period in February 2020, during which three consecutive NPF events occurred. The reanalysis data show that a persistent high-pressure system developed during these days, producing calm winds, stable conditions, and strong vertical subsidence. Under these conditions, we observed both high aerosol loading and high levels of precursor gases, which helped support NPF even during winter pollution episodes.WRF-Chem results reveal elevated SO2 and PM2.5 concentrations up to 2–3 km altitude on NPF event days. Despite high PM2.5, the SO2/PM2.5 ratio was much higher compared to non-event days, indicating a more favourable chemical environment for nucleation. Importantly, the simulations also show that these favourable meteorological and chemical conditions extend over a large spatial region around Hyderabad covering around 500 Kms, suggesting that winter NPF is not only a local phenomenon but part of a wider regional process. Overall, the findings highlight that winter NPF in Hyderabad is strongly controlled by high-pressure-driven meteorology, vertical subsidence, enhanced precursor availability, and large-scale regional influence. These results improve our understanding of particle formation mechanisms in polluted urban environments.
- 13 March 2026
- Published by Copernicus GmbH
Open AccessMeteorology Induced New Particle Formation over India - A modelling approach
Atmospheric particles strongly influence air quality, climate, and human health, and understanding how new particles form in the atmosphere is essential for improving predictions of these impacts. New particle formation (NPF) is one of the key processes that creates fresh aerosol particles, but its behaviour varies widely across regions and seasons. Winter conditions, with shallow boundary layers and high aerosol loading, usually suppress NPF. However, in Hyderabad, India, we observed frequent winter NPF events that occur despite these unfavourable conditions occurring on about 30% of the days. This study combines long-term particle size distribution measurements with meteorological reanalysis and high-resolution WRF-Chem simulations to investigate the meteorological drivers behind these winter events.Particle number size distributions (10–600 nm) were collected at the University of Hyderabad between 2019 and 2022. Large-scale atmospheric conditions were analysed using ERA-5 and MERRA-2 reanalysis, and a detailed WRF-Chem simulation was conducted for a one-week period in February 2020, during which three consecutive NPF events occurred. The reanalysis data show that a persistent high-pressure system developed during these days, producing calm winds, stable conditions, and strong vertical subsidence. Under these conditions, we observed both high aerosol loading and high levels of precursor gases, which helped support NPF even during winter pollution episodes.WRF-Chem results reveal elevated SO2 and PM2.5 concentrations up to 2–3 km altitude on NPF event days. Despite high PM2.5, the SO2/PM2.5 ratio was much higher compared to non-event days, indicating a more favourable chemical environment for nucleation. Importantly, the simulations also show that these favourable meteorological and chemical conditions extend over a large spatial region around Hyderabad covering around 500 Kms, suggesting that winter NPF is not only a local phenomenon but part of a wider regional process. Overall, the findings highlight that winter NPF in Hyderabad is strongly controlled by high-pressure-driven meteorology, vertical subsidence, enhanced precursor availability, and large-scale regional influence. These results improve our understanding of particle formation mechanisms in polluted urban environments.
- Open Access
- 23 February 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-41
Characterization of the complex refractive index of a polluted dust storm over the Western Himalayas
A polluted dust episode over the western Himalaya was characterized using in situ optical measurements, size-resolved aerosol sampling, single-particle analysis, and spectroscopic techniques. During the event, coarse-mode mass increased substantially, accompanied by elevated fine-mode particle number and black carbon concentrations. In situ observations revealed a threefold enhancement in the scattering coefficient and a 2–2.5-fold increase in the absorption coefficient relative to background conditions. Beyond these extrinsic property changes, intrinsic optical properties shifted markedly. Single scattering albedo and scattering Ångström exponent increased, and absorption Ångström exponent decreased, indicating compositional changes toward dust dominance with embedded anthropogenic absorbing aerosols. Single-particle analysis confirmed internal mixing of Fe-bearing mineral dust with carbonaceous material and secondary inorganic species. These compositional and morphological changes were reflected in the refractive index, which increased by approximately 4–6 % in the real part and 30–35 % in the imaginary part across visible wavelengths. The results demonstrate that polluted dust differs fundamentally from pure mineral dust and exhibits enhanced optical efficiency per unit mass and altered aerosol radiation interactions due to chemical transformation during transport. Accurate representation of such region-specific intrinsic properties is essential for quantifying aerosol radiative effects and boundary-layer interactions over the Himalayas.
- 23 February 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-41
Open AccessCharacterization of the complex refractive index of a polluted dust storm over the Western Himalayas
A polluted dust episode over the western Himalaya was characterized using in situ optical measurements, size-resolved aerosol sampling, single-particle analysis, and spectroscopic techniques. During the event, coarse-mode mass increased substantially, accompanied by elevated fine-mode particle number and black carbon concentrations. In situ observations revealed a threefold enhancement in the scattering coefficient and a 2–2.5-fold increase in the absorption coefficient relative to background conditions. Beyond these extrinsic property changes, intrinsic optical properties shifted markedly. Single scattering albedo and scattering Ångström exponent increased, and absorption Ångström exponent decreased, indicating compositional changes toward dust dominance with embedded anthropogenic absorbing aerosols. Single-particle analysis confirmed internal mixing of Fe-bearing mineral dust with carbonaceous material and secondary inorganic species. These compositional and morphological changes were reflected in the refractive index, which increased by approximately 4–6 % in the real part and 30–35 % in the imaginary part across visible wavelengths. The results demonstrate that polluted dust differs fundamentally from pure mineral dust and exhibits enhanced optical efficiency per unit mass and altered aerosol radiation interactions due to chemical transformation during transport. Accurate representation of such region-specific intrinsic properties is essential for quantifying aerosol radiative effects and boundary-layer interactions over the Himalayas.