MDMita Dasog

Mita Dasog

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mita Dasog has a total of 135 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Unpacking SiO 2 precursor effects on aluminothermic reduction in molten NaCl–KCl mixture to yield porous silicon

    by Toren Hynes, Sarah A. Martell, Mita Dasog

    Developing lower-energy routes to silicon-based materials is important for improving the sustainability of chemical processes. Porous silicon (p-Si) is a nontoxic material with applications in CO 2 reduction, photocatalytic water splitting, lithium-ion batteries, and on-demand hydrogen generation, yet conventional silicon production relies on energy-intensive carbothermal reduction of SiO 2 at >1500 °C. Aluminothermic reduction offers a lower-temperature alternative, but many reported methods rely on volatile AlCl 3 salt. Recently, we reported a molten-salt-assisted aluminothermic reduction of fumed SiO 2 using a NaCl–KCl mixture that produces p-Si within 2 h and can yield large quantities of hydrogen on demand. Here, we evaluate the generality of this approach by applying it to additional SiO 2 precursors (−325 mesh and Stöber silica) and investigate the factors governing reduction efficiency. We find that the extent of reduction is strongly dependent on precursor surface area, with high-surface-area fumed SiO 2 undergoing the most complete conversion and Stöber precursor the least. Electron microscopy reveals substantial molten-salt-induced restructuring of SiO 2 , indicating that precursor morphology and surface area play key roles in controlling reduction kinetics. These results establish structure–reactivity relationships for molten-salt aluminothermic reduction and provide guidance for designing more efficient and scalable routes to p-Si.

  • Open Access

    Ultrafast Mechanochemical Synthesis of Plasmonic Transition Metal Nitride Nanoparticles

    by Blaine G. Fiss, Mia Q. Huskilson, Yashar E. Monfared, Mita Dasog

    Refractory plasmonic materials, such as transition metal nitrides and carbides have shown the potential to replace more expensive or oxidatively and thermally unstable materials composed of gold, silver, aluminum, and copper. The synthesis of transition metal nitride nanoparticles typically relies on high‐temperature (>800°C) nitridation of metal halides or oxides, ranging from hours to even days. These methods are slow and consume significant amounts of energy. Herein, a rapid, mechanochemical method with no need for external heating is presented, showing effective formation of plasmonic group 4 transition metal nitride nanoparticles in as little as 60 seconds of grinding. Using this method, both mono‐ (TiN, ZrN, and HfN) and mixed‐metal nitrides (Zr x Hf 1‐x N, 0<x<1) can be achieved. The particles were analyzed using powder x‐ray diffraction, x‐ray photoelectron spectroscopy, electron microscopy, and absorbance spectroscopy. The effect of nitride source, milling time, and milling frequency on the product formation, particle size, crystallinity, and localized surface plasmon resonance were studied.

  • Open Access

    Lighting the Way to Sustainability with Refractory Plasmonic Materials

    by Vanshika Jain, Dreenan Shea, Blaine G. Fiss, Mita Dasog

    The search for plasmonic materials that combine strong light-matter interactions with stability under demanding operating conditions has driven growing interest in transition metal nitrides and carbides. These refractory materials offer tunable optical properties, thermal and chemical stability, and diverse electronic structures that distinguish them from conventional noble-metal plasmonic materials. This Review examines the development of refractory plasmonic materials from their fundamental photophysical properties and synthesis to their use in water-energy systems, climate-resilient infrastructure, and solar-driven chemical transformations. Attention is given to how composition, stoichiometry, particle morphology, and surface chemistry influence localized surface plasmon resonance, hot-carrier dynamics, and photothermal conversion. We critically assess the sustainability of refractory plasmonics beyond noble-metal replacement, considering resource availability and criticality, synthesis and processing requirements, material complexity, and functional lifetime. Finally, we outline key challenges and emerging opportunities in positioning refractory plasmonic materials as the cornerstone of a sustainable economy.

  • Open Access

    Unpacking SiO2 Precursor Effects on Aluminothermic Reduction in Molten NaCl-KCl Mixture to Yield Porous Silicon

    by Toren Hynes, Sarah A. Martell, Mita Dasog

    Developing lower-energy routes to silicon-based materials is important for improving the sustainability of chemical processes. Porous silicon (p-Si) is a nontoxic material with applications in CO 2 reduction, photocatalytic water splitting, lithium-ion batteries, and on-demand hydrogen generation, yet conventional silicon production relies on energy-intensive carbothermal reduction of SiO 2 at >1500 °C. Aluminothermic reduction offers a lower-temperature alternative, but many reported methods rely on volatile AlCl 3 salt. Recently, we reported a molten-salt-assisted aluminothermic reduction of fumed SiO 2 using a NaCl-KCl mixture that produces p-Si within 2 h that can yield large quantities of hydrogen on-demand. Here, we evaluate the generality of this approach by applying it to additional SiO 2 precursors (−325 mesh and Stöber silica) and investigate the factors governing reduction efficiency. We find that the extent of reduction is strongly dependent on precursor surface area, with high-surface-area fumed SiO 2 undergoing the most complete conversion and Stöber precursor the least. Electron microscopy reveals substantial molten-salt-induced restructuring of SiO 2 , indicating that precursor morphology and surface area play key roles in controlling reduction kinetics. These results establish structure–reactivity relationships for molten-salt aluminothermic reduction and provide guidance for designing more efficient and scalable routes to porous silicon.

  • Open Access

    Ultrafast Mechanochemical Synthesis of Plasmonic Transition Metal Nitride Nanoparticles

    by Blaine G Fiss, Mia Q Huskilson, Yashar E Monfared, Mita Dasog

    Refractory plasmonic materials, such as transition metal nitrides (TMN) and carbides (TMC) have shown the potential to replace more expensive or oxidatively unstable materials composed of gold, silver, aluminum and copper. The synthesis of TMN nanoparticles typically relies on high-temperature (>800 °C) nitridation of metal halides or oxides ranging from hours to even days. These methods are slow and consume significant amounts of energy. Herein, a rapid, room temperature mechanochemical method is presented showing effective formation of plasmonic group 4 TMN nanoparticles in as little as 60 seconds of grinding. Using this method, both mono-(TiN, ZrN, and HfN) and mixed-metal nitrides (Zr x Hf 1-x N, 0<x<1) can be achieved. The particles were analyzed using powder X-ray diffraction, X-ray photoelectron spectroscopy, electron microscopy, and absorbance spectroscopy. The effect of nitride source, milling time, and milling frequency on the product formation, particle size, crystallinity, and localized surface plasmon resonance were studied.

  • Open Access

    Synthesis of Free‐Standing Alloyed Plasmonic Zr x Hf 1‐x N Nanoparticles

    by Blaine G. Fiss, Mita Dasog

    Transition metal nitride nanomaterials are emerging as promising candidates for applications in photochemistry and plasmonics due to their stability and tunable optoelectronic properties. While single transition metal containing nitrides have been extensively studied, experimental reports on mixed‐metal systems remain scarce, especially for plasmonic applications. Here, a bottom‐up synthesis of mixed zirconium–hafnium nitride nanoparticles with the general formula A x B 1‐x N is reported. Precise control over metal composition is achieved by varying the ratios of metal halide precursors, enabling systematic tuning of the resulting nanomaterial composition and their optical properties. This approach offers a pathway toward the rational design of multimetallic plasmonic nitrides for advanced photonic applications.


  • Open Access

    Decoding Plasmonic Enhancement Pathways in Group 4 Metal Nitride‐TiO 2 Composites: Rhodamine B Dye Degradation Case Study

    by Dreenan Shea, Victoria White, Mita Dasog

    Traditional photocatalysis has predominantly focused on TiO 2 due its low cost, chemical stability, and non‐toxicity, however, its wide bandgap (>3 eV) limits solar absorption to under 5%. Plasmonic materials address this by extending light absorption into the visible and near‐infrared range, enhancing catalytic activity through localized electromagnetic fields, hot carriers, and photothermal effects. Plasmonic transition metal nitrides have emerged as promising, cost‐effective alternatives to noble metals due to their strong broadband absorption and chemical stability. While earlier studies attribute their photocatalytic enhancement mainly to hot carrier injection, a more detailed assessment is needed to properly understand the enhancement pathway. This study synthesizes composites of TiN, ZrN, and HfN with commercial P25 TiO 2 and evaluates their photocatalytic performance via Rhodamine B dye degradation. Under 100 mW cm −2 illumination, the 1 wt% ZrN/TiO 2 composite achieves over 99% dye degradation in 50 min, outperforming TiN and HfN, which require 10 wt% loading for similar results. By analyzing reaction temperature profiles and degradation kinetics under different light intensities, the study finds that hot carrier effects dominate in TiN/TiO 2 and ZrN/TiO 2 systems, while photothermal effects play a larger role in HfN/TiO 2 composites. This highlights the distinct mechanisms by which plasmonic nitrides enhance photocatalytic efficiency.


  • Open Access

    Salty Silicon Synthesis: Utilization of NaCl -KCl Salt Mixtures to Assist in the Aluminothermic Reduction of Fumed SiO2

    by Toren Hynes, Sarah Martell, Mita Dasog

    Porous silicon (p-Si) is a promising material for diverse green energy applications, including use as a negative electrode in lithium-ion batteries, solar-driven fuel production, and on-demand hydrogen generation. Conventional production methods involve the use of hydrofluoric acid etching of bulk Si or magnesiothermic reduction of silica which are limited by hazards, wastefulness, or risk of thermal runaway. Aluminum metal offers a safer, more sustainable alternative to magnesium, as it is abundant from scrap sources and easily recycled. However, existing aluminothermic reduction methods typically require AlCl3 salt, which is volatile, difficult to recycle, and demands long reaction times. This study explores a salt-mediated approach using a 1:1 wt mixture of NaCl and KCl to facilitate the reduction of fumed silica with aluminum metal. This process yields p-Si at ~83% in just one hour at 850 °C. The resulting material exhibits high reactivity, producing up to 1476 ± 51 mL of hydrogen per gram of Si within ~5 minutes, using various water sources including seawater. These findings demonstrate a safer, faster, and more scalable route to functional porous silicon for on-demand hydrogen generation and other sustainable energy applications.