Nicholas Honeth
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nicholas Honeth has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Lars Nordstrom
Department of Electric Power and Energy Systems, KTH Royal Institute of Technology, Stockholm, Sweden
10 shared publications Arshad Saleem
Department of Industrial Information and Control Systems, KTH, Stockholm, Sweden
5 shared publicationsLars Nordstrom
Industrial Information and Control Systems, KTH - Royal Institute of Technology, Stockholm, Sweden
4 shared publicationsClaes Sandels
2 shared publications- Geert Deconinck
KU Leuven
2 shared publications Hannes Holm
2 shared publications
Latest Publications
- 27 February 2020
- Published by SAE International in SAE International Journal of Alternative Powertrains
- Vol. 9 (1)
Efficiency of an AC Conductive In-Road Charging System for Electric Vehicles-Analysis of Pilot Project Data
- 27 February 2020
- Published by SAE International in SAE International Journal of Alternative Powertrains
- Vol. 9 (1)
Efficiency of an AC Conductive In-Road Charging System for Electric Vehicles-Analysis of Pilot Project Data
- 17 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 13 (6) , 3206-3215
Distributed Topology Inference for Electric Power Grids
This paper proposes an algorithm, including a multiagent-based system architecture, for distributed inference of power grid topologies. The core algorithm is based on processing measurement time series, or fingerprints, using statistical correlation to determine the connectivity between nodes. Notably, the method and proposed system architecture is completely distributed. The solution has been developed with contemporary IEC 61850 compliant substation automation systems in mind. This paper includes a presentation of the theoretical foundation for the distributed topology inference algorithm as well as the proposed system architecture. A case study utilizing the RBTS bus 4 model is included to demonstrate the capabilities of the method under static as well as transient situations. Furthermore, the results and analysis of the performance and scalability of the algorithm are presented. The main contribution of this paper is an application to infer the electrical connectivity of power grids without central functionality.
- 17 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 13 (6) , 3206-3215
Distributed Topology Inference for Electric Power Grids
This paper proposes an algorithm, including a multiagent-based system architecture, for distributed inference of power grid topologies. The core algorithm is based on processing measurement time series, or fingerprints, using statistical correlation to determine the connectivity between nodes. Notably, the method and proposed system architecture is completely distributed. The solution has been developed with contemporary IEC 61850 compliant substation automation systems in mind. This paper includes a presentation of the theoretical foundation for the distributed topology inference algorithm as well as the proposed system architecture. A case study utilizing the RBTS bus 4 model is included to demonstrate the capabilities of the method under static as well as transient situations. Furthermore, the results and analysis of the performance and scalability of the algorithm are presented. The main contribution of this paper is an application to infer the electrical connectivity of power grids without central functionality.
- 14 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Directional definite-time earth fault protection based on virtual polarisation and COTS components
This paper comprises the development of a directional definite-time earth fault protection based on virtual polarisation and Commercial-off-the-Shelf (COTS) components. The earth fault protection is intended to be sensitive for high-resistive and remote faults. The challenge of those type of faults is the low magnitude of the zero-sequence voltage measured at the relay location, which is often used as the polarising quantity for directional sensing. A conventional approach is to use a current transformer (CT) in the neutral-to-ground path of a wye-connected power transformer at the corresponding substation. Since this approach exposes some additional costs and efforts in terms of CT installations and engineering, a virtual polarisation approach has been implemented, which has been introduced by the IEEE Power System Relay Committee. Thus a reliable polarising quantity is gained. The platform architecture has been design based on standardised hardware and software products, considered as COTS components. This effort has been made in order to yield a cost-efficient solution as well as to reduce the time-to-market of the development process. In the end the functional performance of the protection system has been tested utilising a hardware-in-the-loop (HIL) approach.
- 14 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Directional definite-time earth fault protection based on virtual polarisation and COTS components
This paper comprises the development of a directional definite-time earth fault protection based on virtual polarisation and Commercial-off-the-Shelf (COTS) components. The earth fault protection is intended to be sensitive for high-resistive and remote faults. The challenge of those type of faults is the low magnitude of the zero-sequence voltage measured at the relay location, which is often used as the polarising quantity for directional sensing. A conventional approach is to use a current transformer (CT) in the neutral-to-ground path of a wye-connected power transformer at the corresponding substation. Since this approach exposes some additional costs and efforts in terms of CT installations and engineering, a virtual polarisation approach has been implemented, which has been introduced by the IEEE Power System Relay Committee. Thus a reliable polarising quantity is gained. The platform architecture has been design based on standardised hardware and software products, considered as COTS components. This effort has been made in order to yield a cost-efficient solution as well as to reduce the time-to-market of the development process. In the end the functional performance of the protection system has been tested utilising a hardware-in-the-loop (HIL) approach.
- 1 April 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 4, 1-6
Multi-Agent platform for Grid and communication impact analysis of rapidly deployed demand response algorithms
This paper describes a rapid algorithm deployment platform for Smart Grid research. Accounting for the complex interplay of power system dynamics and communication delays in the network by means of rapid code deployment during algorithm design can improve the evaluation of Smart Grid control schemes and their impact on grid power quality. Our novel approach bridges the gap between the implementation of highly realistic multi-timeframe simulations, and expensive hardwired deployment. The architecture and behavior of the platform is presented for one specific Demand Response algorithm namely Dual Decomposition. Large numbers of distributed agents are efficiently managed by employing FIPA compliant Agent Management Specification (AMS) and Directory Facilitator (DF) functionalities, as well as an efficient SQL database monitoring and logging scheme. The architecture is deployed both on an actual laboratory setup and a virtual OPAL-RT environment. Simulations results show that system latency and computational load increase linearly for increasing numbers of distributed agents. This novel approach provides a realistic and pragmatic solution for evaluating distributed applications for grid management, market applications and advanced monitoring of power quality requirements.
- 1 April 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 4, 1-6
Multi-Agent platform for Grid and communication impact analysis of rapidly deployed demand response algorithms
This paper describes a rapid algorithm deployment platform for Smart Grid research. Accounting for the complex interplay of power system dynamics and communication delays in the network by means of rapid code deployment during algorithm design can improve the evaluation of Smart Grid control schemes and their impact on grid power quality. Our novel approach bridges the gap between the implementation of highly realistic multi-timeframe simulations, and expensive hardwired deployment. The architecture and behavior of the platform is presented for one specific Demand Response algorithm namely Dual Decomposition. Large numbers of distributed agents are efficiently managed by employing FIPA compliant Agent Management Specification (AMS) and Directory Facilitator (DF) functionalities, as well as an efficient SQL database monitoring and logging scheme. The architecture is deployed both on an actual laboratory setup and a virtual OPAL-RT environment. Simulations results show that system latency and computational load increase linearly for increasing numbers of distributed agents. This novel approach provides a realistic and pragmatic solution for evaluating distributed applications for grid management, market applications and advanced monitoring of power quality requirements.
- 1 July 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Software merging unit based IED functional test platform
In Substation Automation Systems, application functions such as monitoring, control, and protection are deployed in intelligent electronic devices (IEDs). Before the IEDs are installed in the substation, functions are tested by the manufactures to ensure that the functions operate properly as designed. A conventional function test platform is made of amplifiers with copper wire connection to the IEDs. It has drawbacks such as high cost, limited flexibility, and limited number of signal channels. With the introduction of the IEC61850 standard, IEDs are able to obtain measurement from merging units (MU) via the process bus. Consequently, using MUs to replace the amplifier for IED function testing has been studied by several research groups. All of them use hardware MUs or power system simulator embedded MUs. These MUs based test platforms have weakness such as limitation of the number of MUs and lower flexibility in MU performance modification, This paper proposes a novel IED functional test platform using software MU (sMU), which mitigates the above limitations. Thanks to the software approach, different MU performance scenarios can be easily configured instead of using a complicated communications simulator. The sMU based test platform concept has been proved by performing accuracy and operate-time tests with transformer differential protection. Comparing with conventional test platform, sMU based test platform has better results in the accuracy tests and similar performance in the operate-time tests. Therefore, it is feasible to use sMU based platform for IED functional tests.
- 1 July 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Software merging unit based IED functional test platform
In Substation Automation Systems, application functions such as monitoring, control, and protection are deployed in intelligent electronic devices (IEDs). Before the IEDs are installed in the substation, functions are tested by the manufactures to ensure that the functions operate properly as designed. A conventional function test platform is made of amplifiers with copper wire connection to the IEDs. It has drawbacks such as high cost, limited flexibility, and limited number of signal channels. With the introduction of the IEC61850 standard, IEDs are able to obtain measurement from merging units (MU) via the process bus. Consequently, using MUs to replace the amplifier for IED function testing has been studied by several research groups. All of them use hardware MUs or power system simulator embedded MUs. These MUs based test platforms have weakness such as limitation of the number of MUs and lower flexibility in MU performance modification, This paper proposes a novel IED functional test platform using software MU (sMU), which mitigates the above limitations. Thanks to the software approach, different MU performance scenarios can be easily configured instead of using a complicated communications simulator. The sMU based test platform concept has been proved by performing accuracy and operate-time tests with transformer differential protection. Comparing with conventional test platform, sMU based test platform has better results in the accuracy tests and similar performance in the operate-time tests. Therefore, it is feasible to use sMU based platform for IED functional tests.
- 1 July 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19325517,p. 1-5
A method to identify exposed nodes in low voltage distribution grids with High PV penetration
The impact of introducing distributed energy resources at the low voltage side of the distribution grid is currently raising new challenges for utilities. In particular, the high penetration of photovoltaic panels (PVs) in radial grids is increasing the active power losses in the branches and the voltage level at some of the nodes. Principally nodes next to PV array installations. This paper presents a methodology based on design of experiments (DOE) to detect such exposed nodes and branches, together with the identification of the main scenarios that cause such problems, characterized by: season, type of day, solar radiation and outdoor temperature levels. The methodology is simulated on a LV network based on the Cigre benchmark Grid with real utility data. The exposed nodes are classified for each feeder from most to least problematic and showed (as expected) sensitivity to seasonality (summertime), characterized by high solar radiation and outdoor temperatures.
- 1 July 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19325517,p. 1-5
A method to identify exposed nodes in low voltage distribution grids with High PV penetration
The impact of introducing distributed energy resources at the low voltage side of the distribution grid is currently raising new challenges for utilities. In particular, the high penetration of photovoltaic panels (PVs) in radial grids is increasing the active power losses in the branches and the voltage level at some of the nodes. Principally nodes next to PV array installations. This paper presents a methodology based on design of experiments (DOE) to detect such exposed nodes and branches, together with the identification of the main scenarios that cause such problems, characterized by: season, type of day, solar radiation and outdoor temperature levels. The methodology is simulated on a LV network based on the Cigre benchmark Grid with real utility data. The exposed nodes are classified for each feeder from most to least problematic and showed (as expected) sensitivity to seasonality (summertime), characterized by high solar radiation and outdoor temperatures.
- 1 July 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19325517,p. 1-5
Development of a laboratory platform for distributed grid management applications
This paper describes practical experiences in the design and implementation of a laboratory platform for developing and evaluating distributed grid management applications. The applications considered here are focused primarily on the implementation of control mechanisms for demand response of a heterogeneous portfolio of loads and distributed energy resources connected at low voltage levels. Lessons learned from the development of interfaces to various devices for integration into complex multi-host distributed control system architectures are described. Additionally, the authors provide reflections on practical aspects of building such systems and propose a set of requirements for the development of larger pilot tests.
- 1 July 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19325517,p. 1-5
Development of a laboratory platform for distributed grid management applications
This paper describes practical experiences in the design and implementation of a laboratory platform for developing and evaluating distributed grid management applications. The applications considered here are focused primarily on the implementation of control mechanisms for demand response of a heterogeneous portfolio of loads and distributed energy resources connected at low voltage levels. Lessons learned from the development of interfaces to various devices for integration into complex multi-host distributed control system architectures are described. Additionally, the authors provide reflections on practical aspects of building such systems and propose a set of requirements for the development of larger pilot tests.
- 1 July 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 297-301
An archimate based analysis of microgrid control system architectures
The architectures containing embedded systems such as microgrid controllers are becoming more complex. While there are several known methodologies for embedded system modeling and design, they mostly cover development related performance issues. There exists a gap in the management of architectures implementing embedded systems for power systems applications. This paper proposes to use enterprise architecture analysis, based on earlier work, to fill that gap. Availability, interoperability and cost analysis are in focus. Enterprise architecture models are important in order to abstract the technical detail for planning and design in order to provide a basis for discussion of technical scalability and cost management amongst stakeholders and technical experts. A microgrid control architecture based example is given to illustrate the analysis possibilities.
- 1 July 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 297-301
An archimate based analysis of microgrid control system architectures
The architectures containing embedded systems such as microgrid controllers are becoming more complex. While there are several known methodologies for embedded system modeling and design, they mostly cover development related performance issues. There exists a gap in the management of architectures implementing embedded systems for power systems applications. This paper proposes to use enterprise architecture analysis, based on earlier work, to fill that gap. Availability, interoperability and cost analysis are in focus. Enterprise architecture models are important in order to abstract the technical detail for planning and design in order to provide a basis for discussion of technical scalability and cost management amongst stakeholders and technical experts. A microgrid control architecture based example is given to illustrate the analysis possibilities.
- 24 June 2013
- Published by Wiley in Expert Systems
- Vol. 31 (4) , 299-318
Indicators of expert judgement and their significance: an empirical investigation in the area of cyber security
In situations when data collection through observations is difficult to perform, the use of expert judgement can be justified. A challenge with this approach is, however, to value the credibility of different experts. A natural and state‐of‐the art approach is to weight the experts' judgements according to their calibration, that is, on the basis of how well their estimates of a studied event agree with actual observations of that event. However, when data collection through observations is difficult to perform, it is often also difficult to estimate the calibration of experts. As a consequence, variables thought to indicate calibration are generally used as a substitute of it in practice. This study evaluates the value of three such indicative variables: consensus, experience and self‐proclamation. The significances of these variables are analysed in four surveys covering different domains in cyber security, involving a total of 271 subjects. Results show that consensus is a reasonable indicator of calibration. The mean Pearson correlation between these two variables across the four studies was 0.407. No significant correlations were found between calibration and experience or calibration and self‐proclamation. However, as a side result, it was discovered that a subject that perceives itself as more knowledgeable than others likely also is more experienced.
- 24 June 2013
- Published by Wiley in Expert Systems
- Vol. 31 (4) , 299-318
Indicators of expert judgement and their significance: an empirical investigation in the area of cyber security
In situations when data collection through observations is difficult to perform, the use of expert judgement can be justified. A challenge with this approach is, however, to value the credibility of different experts. A natural and state‐of‐the art approach is to weight the experts' judgements according to their calibration, that is, on the basis of how well their estimates of a studied event agree with actual observations of that event. However, when data collection through observations is difficult to perform, it is often also difficult to estimate the calibration of experts. As a consequence, variables thought to indicate calibration are generally used as a substitute of it in practice. This study evaluates the value of three such indicative variables: consensus, experience and self‐proclamation. The significances of these variables are analysed in four surveys covering different domains in cyber security, involving a total of 271 subjects. Results show that consensus is a reasonable indicator of calibration. The mean Pearson correlation between these two variables across the four studies was 0.407. No significant correlations were found between calibration and experience or calibration and self‐proclamation. However, as a side result, it was discovered that a subject that perceives itself as more knowledgeable than others likely also is more experienced.
- 1 June 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Development of the IEC 61850–9–2 software merging unit IED test and training platform
The IEC 61850 standard specifies a data model and communication service mapping to facilitate exchange of data and events amongst devices in a substation automation system (SAS). One of the architectural components of an IEC 61850 SAS is the process bus. The process bus is an isolated network segment used for carrying Sampled Value (SV) streams of process data and possibly GOOSE status and command signals between Merging Units (MU) and the IEDs implementing monitoring, protection and control functionality related to the connected secondary equipment. The term MU refers to network-enabled devices that connect to instrument transformers in the switchyard streaming packets of sampled values onto the process bus as defined in IEC 61850-9-2. This paper describes work done to develop an IEC 61850-9-2 implementation and integrate it into a testing environment which can simulate primary and secondary equipment modeled substation scenarios and provide a parametric emulation of the functionality of a MU.
- 1 June 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Development of the IEC 61850–9–2 software merging unit IED test and training platform
The IEC 61850 standard specifies a data model and communication service mapping to facilitate exchange of data and events amongst devices in a substation automation system (SAS). One of the architectural components of an IEC 61850 SAS is the process bus. The process bus is an isolated network segment used for carrying Sampled Value (SV) streams of process data and possibly GOOSE status and command signals between Merging Units (MU) and the IEDs implementing monitoring, protection and control functionality related to the connected secondary equipment. The term MU refers to network-enabled devices that connect to instrument transformers in the switchyard streaming packets of sampled values onto the process bus as defined in IEC 61850-9-2. This paper describes work done to develop an IEC 61850-9-2 implementation and integrate it into a testing environment which can simulate primary and secondary equipment modeled substation scenarios and provide a parametric emulation of the functionality of a MU.