Huy Thanh Vo
Huy Thanh Vo has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
Takaya Higuchi
Graduate School of Sciences and Technology for Innovation Yamaguchi University, 2-16-1 Tokiwadai, Ube, Yamaguchi 755-8611, Japan
5 shared publications- Tsuyoshi Imai
Graduate School of Sciences and Technology for Innovation, Yamaguchi University, Yamaguchi 755-8611, Japan
5 shared publications Koichi Yamamoto
Faculty of Engineering, Yamaguchi University, 2-16-1 Tokiwadai, Yamaguchi 755-8611, Japan
4 shared publicationsMasahiko Sekine
Faculty of Engineering, Yamaguchi University, 2-16-1 Tokiwadai, Yamaguchi 755-8611, Japan
4 shared publicationsTsuyoshi Imai
Division of Environmental Science and Engineering, Yamaguchi University, Yamaguchi 755-8611, Japan
4 shared publicationsAriyo Kanno
Faculty of Engineering, Yamaguchi University, 2-16-1 Tokiwadai, Yamaguchi 755-8611, Japan
3 shared publications
Latest Publications
- Open Access
- 1 November 2025
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1556 (1)
Advancing energy-efficient buildings in Vietnam’s coastal urban areas: stakeholder insights and readiness assessment toward nZEB implementation
The transition toward nearly zero-energy buildings (nZEBs) is essential for Vietnam’s building sector under national decarbonisation goals. This study reports a survey of 400 practitioners across eight south-central coastal provinces to assess current practices, awareness, barriers and readiness with respect to the forthcoming Vietnamese energy code (QCVN 04-3:2025/BXD) and area benchmarks. Results show limited deployment of key measures: only 34.5% report an energy-management system (EMS) and rooftop photovoltaics (PV) readiness is 12% (full) and 24% (partial). Normalised energy use intensity (EUI) indicates many existing buildings may not meet the 165kWh/m 2 /yr target, consistent with the 150-175kWh/m 2 /yr ASEAN benchmark band. Barriers are mainly institutional: lack of detailed guidance and enforcement is cited more frequently than upfront cost. A dual-pathway policy package is proposed: mandatory disclosure of operational EUI linked to EMS adoption, and incentives such as green credit lines and floor-area bonuses to accelerate retrofits. These actions would align stakeholder behaviour with regulatory evolution and unlock efficiency potential in rapidly urbanising coastal regions.
- 1 November 2025
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1556 (1)
Open AccessAdvancing energy-efficient buildings in Vietnam’s coastal urban areas: stakeholder insights and readiness assessment toward nZEB implementation
The transition toward nearly zero-energy buildings (nZEBs) is essential for Vietnam’s building sector under national decarbonisation goals. This study reports a survey of 400 practitioners across eight south-central coastal provinces to assess current practices, awareness, barriers and readiness with respect to the forthcoming Vietnamese energy code (QCVN 04-3:2025/BXD) and area benchmarks. Results show limited deployment of key measures: only 34.5% report an energy-management system (EMS) and rooftop photovoltaics (PV) readiness is 12% (full) and 24% (partial). Normalised energy use intensity (EUI) indicates many existing buildings may not meet the 165kWh/m 2 /yr target, consistent with the 150-175kWh/m 2 /yr ASEAN benchmark band. Barriers are mainly institutional: lack of detailed guidance and enforcement is cited more frequently than upfront cost. A dual-pathway policy package is proposed: mandatory disclosure of operational EUI linked to EMS adoption, and incentives such as green credit lines and floor-area bonuses to accelerate retrofits. These actions would align stakeholder behaviour with regulatory evolution and unlock efficiency potential in rapidly urbanising coastal regions.
- Open Access
Utilizing Electricity-Producing Bacteria Flora to Mitigate Hydrogen Sulfide Generation in Sewers through an Electron-Pathway Enabled Conductive Concrete
This study aims to demonstrate the effectiveness of using biological oxidation for hydrogen sulfide (H2S) control. A long-term experiment was conducted using a rod-shaped electrode made of highly conductive concrete, which provided an electron pathway for H2S mitigation. Bacterial flora analysis was conducted using PCR-DGGE and metagenomic analysis by next-generation sequencing to identify electricity-producing bacteria. Results showed that H2S was effectively mitigated, and electricity-producing bacteria, including Geobacter sp. and Pelobacter sp., were found around the inner surface of the anode. The study found that highly conductive concrete can create an electron pathway for biological oxidation of H2S. Oxygen from the air layer near the surface of the water can act as an electron acceptor, even under anaerobic conditions, enabling effective H2S control in sewer systems.
Open AccessUtilizing Electricity-Producing Bacteria Flora to Mitigate Hydrogen Sulfide Generation in Sewers through an Electron-Pathway Enabled Conductive Concrete
This study aims to demonstrate the effectiveness of using biological oxidation for hydrogen sulfide (H2S) control. A long-term experiment was conducted using a rod-shaped electrode made of highly conductive concrete, which provided an electron pathway for H2S mitigation. Bacterial flora analysis was conducted using PCR-DGGE and metagenomic analysis by next-generation sequencing to identify electricity-producing bacteria. Results showed that H2S was effectively mitigated, and electricity-producing bacteria, including Geobacter sp. and Pelobacter sp., were found around the inner surface of the anode. The study found that highly conductive concrete can create an electron pathway for biological oxidation of H2S. Oxygen from the air layer near the surface of the water can act as an electron acceptor, even under anaerobic conditions, enabling effective H2S control in sewer systems.
- Open Access
- 13 January 2023
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 20 (2) , 1459
Enhancing the Biological Oxidation of H2S in a Sewer Pipe with Highly Conductive Concrete and Electricity-Producing Bacteria
Hydrogen sulfide (H2S) generated in sewer systems is problematic to public health and the environment, owing to its corrosive consequences, odor concerns, and poison control issues. In a previous work, conductive concrete, based on amorphous carbon with a mechanism that operates as a microbial fuel cell was investigated. The objective of the present study is to develop additional materials for highly conductive concrete, to mitigate the concentration of H2S in sewer pipes. Adsorption experiments were conducted to elucidate the role of the H2S reduction. Additionally, electricity-producing bacteria (EPB), isolated from a municipal wastewater treatment plant, were inoculated to improve the H2S reduction. The experimental results showed that inoculation with EPB could decrease the concentration of H2S, indicating that H2S was biologically oxidized by EPB. Several types of new materials containing acetylene black, or magnetite were discovered for use as conductive concrete, and their abilities to enhance the biological oxidation of H2S were evaluated. These conductive concretes were more effective than the commercial conductive concrete, based on amorphous carbon, in decreasing the H2S concentration in sewer pipes.
- 13 January 2023
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 20 (2) , 1459
Open AccessEnhancing the Biological Oxidation of H2S in a Sewer Pipe with Highly Conductive Concrete and Electricity-Producing Bacteria
Hydrogen sulfide (H2S) generated in sewer systems is problematic to public health and the environment, owing to its corrosive consequences, odor concerns, and poison control issues. In a previous work, conductive concrete, based on amorphous carbon with a mechanism that operates as a microbial fuel cell was investigated. The objective of the present study is to develop additional materials for highly conductive concrete, to mitigate the concentration of H2S in sewer pipes. Adsorption experiments were conducted to elucidate the role of the H2S reduction. Additionally, electricity-producing bacteria (EPB), isolated from a municipal wastewater treatment plant, were inoculated to improve the H2S reduction. The experimental results showed that inoculation with EPB could decrease the concentration of H2S, indicating that H2S was biologically oxidized by EPB. Several types of new materials containing acetylene black, or magnetite were discovered for use as conductive concrete, and their abilities to enhance the biological oxidation of H2S were evaluated. These conductive concretes were more effective than the commercial conductive concrete, based on amorphous carbon, in decreasing the H2S concentration in sewer pipes.
- Open Access
Application of Conductive Concrete as a Microbial Fuel Cell to Control H2S Emission for Mitigating Sewer Corrosion
Localized biogenic corrosion and extrication of annoying odors caused by hydrogen sulfide (H2S) have long been a big problem in the management of urban sewer systems. H2S emission control in sewers via chemically or biologically normal oxidation processes has also been investigated extensively and is costly. The objective of this work was to develop a new technology to mitigate the concentration of H2S in sewer pipes using conductive concrete. Experimental results after 66 days show that the concentration of hydrogen sulfide significantly decreased when conductive concrete was used as a microbial fuel cell. Both ordinary Portland cement and conductive concrete were utilized for the target experiment. Elemental sulfur was observed in the coating sludge of conductive concrete, whereas this trend was not observed for ordinary Portland cement. These observations demonstrate that conductive concrete provides an electron pathway from deposited sludge in the bottom of sewer pipes to oxygen dissolved in surface water electrons generated from hydrogen sulfide oxidation in an anaerobic environment via conductive concrete. Finally, regarding the mechanism responsible for hydrogen sulfide oxidation, chemical oxidation was the dominant process, and biological processes did not play a significant role.
Open AccessApplication of Conductive Concrete as a Microbial Fuel Cell to Control H2S Emission for Mitigating Sewer Corrosion
Localized biogenic corrosion and extrication of annoying odors caused by hydrogen sulfide (H2S) have long been a big problem in the management of urban sewer systems. H2S emission control in sewers via chemically or biologically normal oxidation processes has also been investigated extensively and is costly. The objective of this work was to develop a new technology to mitigate the concentration of H2S in sewer pipes using conductive concrete. Experimental results after 66 days show that the concentration of hydrogen sulfide significantly decreased when conductive concrete was used as a microbial fuel cell. Both ordinary Portland cement and conductive concrete were utilized for the target experiment. Elemental sulfur was observed in the coating sludge of conductive concrete, whereas this trend was not observed for ordinary Portland cement. These observations demonstrate that conductive concrete provides an electron pathway from deposited sludge in the bottom of sewer pipes to oxygen dissolved in surface water electrons generated from hydrogen sulfide oxidation in an anaerobic environment via conductive concrete. Finally, regarding the mechanism responsible for hydrogen sulfide oxidation, chemical oxidation was the dominant process, and biological processes did not play a significant role.
- 1 March 2022
- Published by Elsevier in Environmental Research
- Vol. 204 (Pt A) , 111924
Phosphorus application enhances alkane hydroxylase gene abundance in the rhizosphere of wild plants grown in petroleum-hydrocarbon-contaminated soil
- 1 March 2022
- Published by Elsevier in Environmental Research
- Vol. 204 (Pt A) , 111924
Phosphorus application enhances alkane hydroxylase gene abundance in the rhizosphere of wild plants grown in petroleum-hydrocarbon-contaminated soil
- Open Access
- 1 January 2020
- Published by International Journal of Agricultural and Biological Engineering (IJABE) in International Journal of Agricultural and Biological Engineering
- Vol. 13 (5) , 93-98
Performance test of organic planting bags for woody plant seedlings
Organic planting bag has been developed to overcome both weaknesses of plastic polybags, contaminating the soil and damaging the plant’s root when transplanting. The improvement in this stage was achieved by inserting coconut fiber to strengthen a bag. The main purpose of this study was to investigate the effectiveness of seedling and transplanting by using organic planting bags, employed, three woody plants, i.e., Albizia (Albizia julibrissin), Cadam (Neolamarckia cadamba) and Gmelina (Gmelina arborea). Performance testing of organic plant bags was conducted on three compositions of coconut fiber and water hyacinth. Two stages of experiments were conducted to know bag performance. First, the testing of organic plant bags during the nursery was conducted for 50 d from day 0 to day 50. Second, the testing of organic plant bags after transplanting and observed on days 60, 70, and 80, after transplanted on the field. The parameters in this study were plant height, a total of roots that penetrate the organic plant bags and a total of leaves and stem diameters of plant grown in the organic bag and transplanting on land. The results showed that organic planting bag with the composition 155 g of coconut fiber and 505 g of water hyacinth (A3B3) has 0.020 kg/cm2 compressive strength and provides the best plant growth rates. Compressive strength affects the number of roots which penetrate the organic bag. Generally, the growth of seed in organic bags is faster than that in polybags. Albizia shows a higher growth rate (0.379 cm/d) compared to Cadam and Gmelina. Keywords: seedling effectiveness, organic planting bag, nursery, transplanting, woody plant DOI: 10.25165/j.ijabe.20201305.4975 Citation: Lutfi M, Agung N W, Vo T H, Djoyowasito G, Ahmad A M, Sandra S. Performance test of organic planting bags for woody plant seedlings. Int J Agric & Biol Eng, 2020; 13(5): 93–98.
- 1 January 2020
- Published by International Journal of Agricultural and Biological Engineering (IJABE) in International Journal of Agricultural and Biological Engineering
- Vol. 13 (5) , 93-98
Open AccessPerformance test of organic planting bags for woody plant seedlings
Organic planting bag has been developed to overcome both weaknesses of plastic polybags, contaminating the soil and damaging the plant’s root when transplanting. The improvement in this stage was achieved by inserting coconut fiber to strengthen a bag. The main purpose of this study was to investigate the effectiveness of seedling and transplanting by using organic planting bags, employed, three woody plants, i.e., Albizia (Albizia julibrissin), Cadam (Neolamarckia cadamba) and Gmelina (Gmelina arborea). Performance testing of organic plant bags was conducted on three compositions of coconut fiber and water hyacinth. Two stages of experiments were conducted to know bag performance. First, the testing of organic plant bags during the nursery was conducted for 50 d from day 0 to day 50. Second, the testing of organic plant bags after transplanting and observed on days 60, 70, and 80, after transplanted on the field. The parameters in this study were plant height, a total of roots that penetrate the organic plant bags and a total of leaves and stem diameters of plant grown in the organic bag and transplanting on land. The results showed that organic planting bag with the composition 155 g of coconut fiber and 505 g of water hyacinth (A3B3) has 0.020 kg/cm2 compressive strength and provides the best plant growth rates. Compressive strength affects the number of roots which penetrate the organic bag. Generally, the growth of seed in organic bags is faster than that in polybags. Albizia shows a higher growth rate (0.379 cm/d) compared to Cadam and Gmelina. Keywords: seedling effectiveness, organic planting bag, nursery, transplanting, woody plant DOI: 10.25165/j.ijabe.20201305.4975 Citation: Lutfi M, Agung N W, Vo T H, Djoyowasito G, Ahmad A M, Sandra S. Performance test of organic planting bags for woody plant seedlings. Int J Agric & Biol Eng, 2020; 13(5): 93–98.
- 6 June 2016
- Published by IWA Publishing in Water Supply
- Vol. 16 (6) , 1735-1744
Disinfection effect of pressurized carbon dioxide on Escherichia coli and Enterococcus sp. in seawater
Ship ballast water should be disinfected before being discharged into the ocean to avoid the dispersal of non-native species into the marine environment. This study presents the results of using pressurized carbon dioxide (CO2) at less than 1.0 MPa for inactivating Escherichia coli and Enterococcus sp. in artificial seawater (3.4% salinity). The bactericidal effects of pressurized CO2 were assessed using a liquid-film-forming apparatus under various conditions of pressure, temperature, and working volume ratio (WVR). Additionally, leakage of proteins and nucleic acids from cells was measured. Cell morphology of untreated cells and cells treated with pressurized CO2 was assessed using scanning electron microscopy (SEM). Pressurized CO2 treatment affected both strains; however, Enterococcus sp. exhibited higher resistance to pressurized CO2 treatment than did E. coli. Under identical treatment conditions (0.7 MPa, 20 °C, and 50% WVR), more than 5.0 log reduction in the load of E. coli and Enterococcus sp. was achieved after treatments for 5 min and 20 min, respectively. Release of intracellular contents occurred during the treatment process and SEM images of E. coli and Enterococcus sp. revealed that morphological changes had occurred after the treatment with pressurized CO2. Hence, pressurized CO2 has potential applications for inactivating pathogens in ballast water.
- 6 June 2016
- Published by IWA Publishing in Water Supply
- Vol. 16 (6) , 1735-1744
Disinfection effect of pressurized carbon dioxide on Escherichia coli and Enterococcus sp. in seawater
Ship ballast water should be disinfected before being discharged into the ocean to avoid the dispersal of non-native species into the marine environment. This study presents the results of using pressurized carbon dioxide (CO2) at less than 1.0 MPa for inactivating Escherichia coli and Enterococcus sp. in artificial seawater (3.4% salinity). The bactericidal effects of pressurized CO2 were assessed using a liquid-film-forming apparatus under various conditions of pressure, temperature, and working volume ratio (WVR). Additionally, leakage of proteins and nucleic acids from cells was measured. Cell morphology of untreated cells and cells treated with pressurized CO2 was assessed using scanning electron microscopy (SEM). Pressurized CO2 treatment affected both strains; however, Enterococcus sp. exhibited higher resistance to pressurized CO2 treatment than did E. coli. Under identical treatment conditions (0.7 MPa, 20 °C, and 50% WVR), more than 5.0 log reduction in the load of E. coli and Enterococcus sp. was achieved after treatments for 5 min and 20 min, respectively. Release of intracellular contents occurred during the treatment process and SEM images of E. coli and Enterococcus sp. revealed that morphological changes had occurred after the treatment with pressurized CO2. Hence, pressurized CO2 has potential applications for inactivating pathogens in ballast water.
- 1 October 2015
- Published by Elsevier in Journal of Environmental Sciences
- Vol. 36, 38-47
Potential application of high pressure carbon dioxide in treated wastewater and water disinfection: Recent overview and further trends
- 1 October 2015
- Published by Elsevier in Journal of Environmental Sciences
- Vol. 36, 38-47
Potential application of high pressure carbon dioxide in treated wastewater and water disinfection: Recent overview and further trends
- 1 June 2014
- Published by Elsevier in Journal of Environmental Sciences
- Vol. 26 (6) , 1301-1306
Inactivation effect of pressurized carbon dioxide on bacteriophage Qβ and ΦX174 as a novel disinfectant for water treatment
- 1 June 2014
- Published by Elsevier in Journal of Environmental Sciences
- Vol. 26 (6) , 1301-1306
Inactivation effect of pressurized carbon dioxide on bacteriophage Qβ and ΦX174 as a novel disinfectant for water treatment
- 1 September 2013
- Published by Elsevier in Water Research
- Vol. 47 (13) , 4286-4293
Comparison of disinfection effect of pressurized gases of CO2, N2O, and N2 on Escherichia coli
- 1 September 2013
- Published by Elsevier in Water Research
- Vol. 47 (13) , 4286-4293
Comparison of disinfection effect of pressurized gases of CO2, N2O, and N2 on Escherichia coli