GDGuillaume Dramais

Guillaume Dramais

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Guillaume Dramais has a total of 178 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Utilisation de vidéos amateur pour documenter une inondation urbaine. Exemple de la crue du Gier à Rive-de-Gier le 17 octobre 2024

    by Guillaume Dramais, Jérôme Le Coz, Delphine Rouchon, David Perratone

    1. 1.1. La rivière le Gier prend sa source à la Jasserie (altitude 1300 m) dans le parc naturel régional du Pilat et se jette dans le Rhône, après un parcours d’environ 50 kilomètres. Le Gier a été...

  • Observation et modélisation des flux de sable dans les grands cours d’eau

    by Guillaume Dramais

    Disposer de bilans de flux de sable dans les cours d'eau est important. Les enjeux socio-économiques sont multiples avec des aspects écologiques, industriels et de sécurité notamment. Les bilans de flux de sable restent actuellement difficiles à établir, du fait de la grande incertitude du peu de données existantes, ce qui ne permet pas un diagnostic et une prise de décision efficaces. Le sable des cours d'eau est transporté par charriage et suspension graduée. Les volumes de sable déplacés sont déterminés par la capacité de transport de l'écoulement et par la disponibilité des matériaux (apports amont, fond, berges). La motivation générale de cette thèse est de quantifier et réduire l'incertitude sur les flux de sable dans les grands cours d'eau par une approche à base physique. Ce travail explore les principales sources d'incertitude des jaugeages solides, liées à la représentativité des prélèvements, aux analyses, au calcul de flux dans la section. Il ressort que sans procédure d'analyse adaptée, la proportion de sable peut être fortement sous-estimée. Un protocole de mesure de terrain et une méthode alternative de calcul de flux sont proposées. La méthode combine des prélèvements ponctuels et des mesures ADCP (Acoustic Doppler Current Profiler). Cette approche est testée sur plusieurs grands fleuves (Colorado, Rhône, Mékong, Amazone). Plusieurs types de courbes de tarage de sable (empiriques ou à base physique) sont ensuite testées. Les résultats de jaugeages solides, combinés à des modèles de courbe de tarage de sable vont ensuite permettre, par une approche bayésienne, de déterminer des séries temporelles et des bilans de flux de sable ainsi que leurs incertitudes associées


  • Open Access

    Improving hydroacoustic methods for monitoring suspended‐sand flux and grain size in sediment‐laden rivers

    by Jessica Marggraf, Jérôme Le Coz, Benoît Camenen, François Lauters, Guillaume Dramais, Gilles Pierrefeu, David J. Topping

    Suspended‐sand concentration and grain‐size data in rivers provide valuable information on the catchment's dynamics for scientists and river managers. Producing continuous measurements of suspended‐sand concentrations remains a scientific challenge due to their high spatial and temporal variability. Traditional methods such as sediment‐rating curves may be highly uncertain, and optical turbidity is insensitive to coarse particles when there are many fine particles. Surrogate hydroacoustic methods aim to improve sand concentration measurements. These single‐ or dual‐frequency acoustic methods use acoustic attenuation and/or backscatter to estimate fine‐sediment (i.e., silt and clay) and/or sand concentration and possibly grain size. New methods have recently been developed and applied in rivers exhibiting a wide range of sediment conditions in North America but not independently tested elsewhere by other researchers. In this article, we apply, adapt and evaluate hydroacoustic methods to continuously estimate suspended‐sand concentration and grain size in an Alpine river with high suspended‐sediment concentrations. From the example of the River Isère at Grenoble Campus, France, we show that the hydroacoustic methods adapted to local conditions may yield valuable sand concentration estimates consistent with traditional measurements. Compared with prior knowledge, limited additional information on the grain size can be obtained due to high uncertainties. Hydroacoustic concentration estimates are more sensitive to real changes in concentration at the event scale than traditional rating‐curve methods that relate concentration to discharge only. These findings open the perspective for facilitated sand concentration monitoring at a higher temporal resolution with decreased field work.


  • Open Access

    River suspended-sand flux computation with uncertainty estimation using water samples and high-resolution ADCP measurements

    by Jessica Marggraf, Guillaume Dramais, Jérôme Le Coz, Blaise Calmel, Benoît Camenen, David J. Topping, William Santini, Gilles Pierrefeu, François Lauters

    Measuring suspended-sand fluxes in rivers remains a scientific challenge due to their high spatial and temporal variability. To capture the vertical and lateral gradients of concentration in the cross-section, measurements with point samples are performed. However, the uncertainty related to these measurements is rarely evaluated, as few studies of the major sources of error exist. Therefore, the aim of this study is to develop a method to determine the cross-sectional sand flux and estimate its uncertainty. This SDC (for sand discharge computing) method combines suspended-sand concentrations from point samples with ADCP (acoustic Doppler current profiler) high-resolution depth and velocity measurements. The MAP (for multitransect averaged profile) method allows obtaining an average of several ADCP transects on a regular grid, including the unmeasured areas. The suspended-sand concentrations are integrated vertically by fitting a theoretical exponential suspended-sand profile to the data using Bayesian modeling. The lateral integration is based on the water depth as a proxy for the local bed shear stress to evaluate the bed concentration and sediment diffusion along the river cross-section. The estimation of uncertainty combines ISO standards and semi-empirical methods with a Bayesian approach to estimate the uncertainty due to the vertical integration. The new method is applied to data collected in four rivers under various hydro-sedimentary conditions: the Colorado, Rhône, Isère, and Amazon rivers, with computed flux uncertainties ranging between 18 % and 32 %. The relative difference between the suspended-sand flux in 21 cases calculated with the proposed SDC method compared to the International Organization for Standardization (ISO) 4363 standard method ranges between −40 % and +23 %. This method that comes with a flexible, open-source code is the first to propose an applicable uncertainty estimation that could be adapted to other flux computation methods.


  • Open Access

    Comment on egusphere-2023-2348

    by Jessica Laible, Guillaume Dramais, Jérôme Le Coz, Blaise Calmel, Benoît Camenen, David J. Topping, William Santini, Gilles Pierrefeu, François Lauters

    Measuring suspended-sand fluxes in rivers remains a scientific challenge due to their high spatial and temporal variability. To capture the vertical and lateral gradients of concentration in the cross section, measurements with point samples are performed. However, the uncertainty related to these measurements is rarely evaluated, as few studies of the major sources of error exist. Therefore, the aim of this study is to develop a method determining the cross sectional sand flux and estimating its uncertainty. This SDC (for Sand Discharge Computing) method combines suspended-sand concentrations from point samples with ADCP (Acoustic Doppler Current Profiler) high-resolution depth and velocity measurements. The MAP (for Multitransect Averaged Profile) method allows to obtain an average of several ADCP transects on a regular grid, including the unmeasured areas. The suspended-sand concentrations are integrated vertically by fitting a theoretical exponential suspended-sand profile to the data using Bayesian modelling. The lateral integration is based on the water depth as a proxy for the local bed shear stress to evaluate the bed concentration and sediment diffusion along the river cross-section to evaluate the bed concentration and sediment diffusion along the river cross-section. The estimation of uncertainty combines ISO standards and semi-empirical methods with a Bayesian approach to estimate the uncertainty due to the vertical integration. The new method is applied to data collected in four rivers under various hydro-sedimentary conditions: the Colorado, Rhône, Isère and Amazon Rivers, with computed flux uncertainties ranging between 18 and 32 %. The relative difference between the suspended-sand flux in 21 cases calculated with the proposed SDC method compared to the ISO 4363 method ranges between -16 and +3 %. This method, which comes with a flexible, open-source code, is the first proposing an applicable uncertainty estimation, that could be adapted to other flux computation methods.

  • Open Access

    Comment on egusphere-2023-2348

    by Jessica Laible, Guillaume Dramais, Jérôme Le Coz, Blaise Calmel, Benoît Camenen, David J. Topping, William Santini, Gilles Pierrefeu, François Lauters

    Measuring suspended-sand fluxes in rivers remains a scientific challenge due to their high spatial and temporal variability. To capture the vertical and lateral gradients of concentration in the cross section, measurements with point samples are performed. However, the uncertainty related to these measurements is rarely evaluated, as few studies of the major sources of error exist. Therefore, the aim of this study is to develop a method determining the cross sectional sand flux and estimating its uncertainty. This SDC (for Sand Discharge Computing) method combines suspended-sand concentrations from point samples with ADCP (Acoustic Doppler Current Profiler) high-resolution depth and velocity measurements. The MAP (for Multitransect Averaged Profile) method allows to obtain an average of several ADCP transects on a regular grid, including the unmeasured areas. The suspended-sand concentrations are integrated vertically by fitting a theoretical exponential suspended-sand profile to the data using Bayesian modelling. The lateral integration is based on the water depth as a proxy for the local bed shear stress to evaluate the bed concentration and sediment diffusion along the river cross-section to evaluate the bed concentration and sediment diffusion along the river cross-section. The estimation of uncertainty combines ISO standards and semi-empirical methods with a Bayesian approach to estimate the uncertainty due to the vertical integration. The new method is applied to data collected in four rivers under various hydro-sedimentary conditions: the Colorado, Rhône, Isère and Amazon Rivers, with computed flux uncertainties ranging between 18 and 32 %. The relative difference between the suspended-sand flux in 21 cases calculated with the proposed SDC method compared to the ISO 4363 method ranges between -16 and +3 %. This method, which comes with a flexible, open-source code, is the first proposing an applicable uncertainty estimation, that could be adapted to other flux computation methods.

  • Open Access

    River suspended-sand flux computation with uncertainty estimation, using water samples and high-resolution ADCP measurements

    by Jessica Laible, Guillaume Dramais, Jérôme Le Coz, Blaise Calmel, Benoît Camenen, David J. Topping, William Santini, Gilles Pierrefeu, François Lauters

    Measuring suspended-sand fluxes in rivers remains a scientific challenge due to their high spatial and temporal variability. To capture the vertical and lateral gradients of concentration in the cross section, measurements with point samples are performed. However, the uncertainty related to these measurements is rarely evaluated, as few studies of the major sources of error exist. Therefore, the aim of this study is to develop a method determining the cross sectional sand flux and estimating its uncertainty. This SDC (for Sand Discharge Computing) method combines suspended-sand concentrations from point samples with ADCP (Acoustic Doppler Current Profiler) high-resolution depth and velocity measurements. The MAP (for Multitransect Averaged Profile) method allows to obtain an average of several ADCP transects on a regular grid, including the unmeasured areas. The suspended-sand concentrations are integrated vertically by fitting a theoretical exponential suspended-sand profile to the data using Bayesian modelling. The lateral integration is based on the water depth as a proxy for the local bed shear stress to evaluate the bed concentration and sediment diffusion along the river cross-section to evaluate the bed concentration and sediment diffusion along the river cross-section. The estimation of uncertainty combines ISO standards and semi-empirical methods with a Bayesian approach to estimate the uncertainty due to the vertical integration. The new method is applied to data collected in four rivers under various hydro-sedimentary conditions: the Colorado, Rhône, Isère and Amazon Rivers, with computed flux uncertainties ranging between 18 and 32 %. The relative difference between the suspended-sand flux in 21 cases calculated with the proposed SDC method compared to the ISO 4363 method ranges between -16 and +3 %. This method, which comes with a flexible, open-source code, is the first proposing an applicable uncertainty estimation, that could be adapted to other flux computation methods.


  • Quantification of continuous sand flux time-series downstream of a dam during a flushing event

    by Benoît Camenen, Guillaume Dramais, Jessica Laible, Jérôme Le Coz, Gilles Pierrefeu, Thierry Fretaud, François Lauters


  • Comparing suspended sand samplers and evaluating the uncertainty (Room 322, Wednesday June 28th, 10:30am-12:00pm)

    by Guillaume Dramais, Jessica Laible, Jérôme Le, Benoît Camenen, Francois Lauters, Gilles Pierrefeu, Alexis Pavaux

    **Abstract Text** The understanding of sand dynamics in rivers is a scientific challenge. Sand loads in rivers have been reduced due mostly to da | ORAL

  • Open Access

    Outils pour améliorer la mesure du débit minimum biologique des petits cours d'eau

    by Guillaume Dramais, Jérôme LE Coz, Jean-Maxence Ditche, Fabien Thollet, Benoit Camenen, Mickaël Lagouy, Adrien Bonnefoy, Fanny Courapied

    Dans un contexte de tension sur la ressource en eau, la répartition des usages de l’eau des rivières est réglementée pour permettre le maintien de l’équilibre écologique de nos rivières. En France, le contrôle du respect du débit minimum biologique en aval des aménagements est assuré par les agents en charge de la police de l’eau, majoritairement ceux de l’Office français de la biodiversité (OFB). INRAE est engagé depuis de nombreuses années pour accompagner l’OFB dans cette mission par des formations et la diffusion d’outils pour faciliter et améliorer la mesure du débit des cours d’eau. Cet article présente deux exemples de réalisations récentes issues de la convention OFB-INRAE 2019-2021. Le premier est la réalisation d’un essai interlaboratoire de mesures de débit par la méthode par dilution de traceur, le second est le développement et la diffusion d’un modèle de perche transparente à charge dynamique, un outil de mesure de débit à bas coût.