JDJifu Du

Jifu Du

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jifu Du has a total of 31 co-authors. Here are the top co-authors by number of shared publications:

  • Long Zhao

    State Key Laboratory of Advanced Electromagnetic Technology, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan 430074, China

    9 shared publications
  • Xin Yang

    School of Nuclear Technology and Chemistry & Biology, Hubei University of Science and Technology, Xianning 437100, China

    4 shared publications
  • Manman Zhang

    State Key Laboratory of Advanced Electromagnetic Technology, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan 430074, China

    3 shared publications
  • Zhen Dong

    State Key Laboratory of Advanced Electromagnetic Engineering and Technology, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan 430074, China

    3 shared publications
  • Xin Yang

    2 shared publications
  • Zhen Dong

    2 shared publications

Latest Publications

  • Ionic Liquid Functionalized Tragacanth Gum Hydrogel for Methyl Orange: Radiation Synthesis, Structure–Properties, and Selective Adsorption

    by Xin Yang, Jifu Du, Zhen Dong, Long Zhao

    The selective adsorption of purely targeted dye from mixed dye solutions draws significant attention for potential recovery and reuse. In this work, a series of alkyl substituted ionic liquids (1‐alkyl ‐3‐vinyl‐ imidazolium bromide [C n VIm]Br, n = 4, 6, 8, 10, and 12) modified tragacanth gum (TG‐C n Br) was synthesized by radiation technique. The prepared TG based hydrogel was used to separate the molecules of methyl orange (MO) from the mixed anionic dyes. The correlation between the length of alkyl chain and the adsorption performance was investigated. TG‐C 12 Br demonstrated the highest adsorption performance to MO among all the tested anionic dyes. The selectivity coefficient for MO versus indigo carmine (IC) and acid fuchsin (AF) are 5.856 and 107.5, respectively. The optimal conditions for the adsorption of MO were pH of 6.0, adsorbent dose of 0.6 mg/L, and contact time of 420 min. The maximum adsorption capacity of MO on TG‐C 12 Br at 25, 35 and 50 °C are 389.11, 400.00, and 414.94 mg/g, respectively. The MO removal was enhanced under high salinity condition. The adsorption of MO probably through hydrophobic adsorption, hydrogen bond, electrostatic attraction, and π−π interactions. Therefore, TG‐C 12 Br prepared by radiation technique exhibited a promising application prospect for selective adsorption of MO dye.

  • Open Access

    Ultra-Fast Removal of CBB from Wastewater by Imidazolium Ionic Liquids-Modified Nano-Silica

    by Mengyue Zhang, Fan Yang, Nan Wang, Jifu Du, Juntao Yan, Ya Sun, Manman Zhang, Long Zhao

    The efficient removal of dyes is of significant importance for environmental purification and human health. In this study, a novel material (Si-MPTS-IL) has been synthesized by the immobilization of imidazole ionic liquids (ILs) onto nano-silica using the radiation grafting technique. The adsorption performance of Si-MPTS-IL for Coomassie Brilliant Blue (CBB) removal is studied by a series of static adsorption experiments. It is found that Si-MPTS-IL has ultra-fast adsorption kinetics, reaching equilibrium within 2 min. The adsorption process for CBB conforms to the Langmuir model. In addition, Si-MPTS-IL exhibits a negligible impact on the adsorption efficiency of CBB with the increase in salt concentration. After six cycles of adsorption–desorption, the adsorption efficiency of Si-MPTS-IL remained above 80%, indicating excellent regenerative properties and a promising candidate for the treatment of wastewater containing CBB. A study of the mechanism indicates that the CBB capture by Si-MPTS-IL can be attributed to the synergistic effects of electrostatic interactions and pore filling.


  • Open Access

    Selective and Effective Gold Recovery from Printed Circuit Boards and Gold Slag Using Amino-Acid-Functionalized Cellulose Microspheres

    by Fulai Hao, Jifu Du, Lifang Peng, Manman Zhang, Zhen Dong, Yanbai Shen, Long Zhao

    The hydrometallurgical recovery of gold from electronic waste and gold slag is a hot research topic. To develop a cost-effective and environmentally friendly adsorbent for gold recovery, four types of amino-acid (arginine, histidine, methionine, and cysteine)-functionalized cellulose microspheres were prepared via a radiation technique. The adsorption performance of the amino acid resins toward Au(III) ions was systematically investigated by batch experiments. The amino acid resins could absorb Au(III) ions at a wide pH range. The adsorption process was followed by the pseudo-second-order model and Langmuir model. The theoretical maximum adsorption capacity was calculated as 396.83 mg/g, 769.23 mg/g, 549.45 mg/g, and 636.94 mg/g for ArgR, HisR, MetR, and CysR, respectively. The amino acid resins could effectively and selectively recover trace Au(III) ions from the leaching solutions of printed circuit board and gold slag waste. Lastly, the mechanism underlying amino acid resin’s Au(III) ion recovery capability was investigated by FTIR, XRD, and XPS analyses. This work describes a series of cost-effective gold adsorbents with excellent selectivity and adsorption capacity to boost their practical application.


  • Open Access

    Ethylenediamine and Pentaethylene Hexamine Modified Bamboo Sawdust by Radiation Grafting and Their Adsorption Behavior for Phosphate

    by Jifu Du, Houhua Xiong, Zhen Dong, Xin Yang, Long Zhao, Jun Yang

    Phosphate is an important component for the growth of plants and microorganisms; however, excess phosphate causes serious eutrophication in natural waters. New potential low-loss adsorbents from natural biomass for phosphate removal are desired. Bamboo is one of the most abundant renewable cellulose resources; however, the pure bamboo cellulose is poor to adsorb phosphate. To enhance the adsorption capacity, in this work, bamboo sawdust (BS) was chemically modified by two kinds of amines. First, glycidyl methacrylate (GMA) was grafted on BS using radiation induced graft polymerization. Then, the GMA-grafted BS was further modified by a ring-opening reaction with amines, including ethylenediamine (EDA) and pentaethylene hexamine (PEHA). The amine groups were then quaternized to prepare the BS-GMA-EDA-Q and BS-GMA-PEHA-Q adsorbents. The adsorbents were characterized by FTIR, SEM, TG, and XPS analysis. The adsorption performances of the adsorbents for phosphate were evaluated through batch experiments. The adsorption by BS-GMA-EDA-Q and BS-GMA-PEHA-Q both well obeyed the pseudo-second-order kinetic model and the Langmuir isotherm model, indicating that the adsorption process was chemical monomolecular layer adsorption. The maximum adsorption capacities for BS-GMA-EDA-Q and BS-GMA-PEHA-Q calculated by the Langmuir model were 85.25 and 152.21 mg/g, respectively. A total of 1 mol/L HCl was used to elute the saturated adsorbents. A negligible decrease in adsorption capacity was found after five adsorption–desorption cycles.


  • Open Access

    Radiation Synthesis of Pentaethylene Hexamine Functionalized Cotton Linter for Effective Removal of Phosphate: Batch and Dynamic Flow Mode Studies

    by Jifu Du, Zhen Dong, Zhiyuan Lin, Xin Yang, Long Zhao

    A quaternized cotton linter fiber (QCLF) based adsorbent for removal of phosphate was prepared by grafting glycidyl methacrylate onto cotton linter and subsequent ring-opening reaction of epoxy groups and further quaternization. The adsorption behavior of the QCLF for phosphate was evaluated in a batch and column experiment. The batch experiment demonstrated that the adsorption process followed pseudo-second-order kinetics with an R2 value of 0.9967, and the Langmuir model with R2 value of 0.9952. The theoretical maximum adsorption capacity reached 152.44 mg/g. The experimental data of the fixed-bed column were well fitted with the Thomas and Yoon–Nelson models, and the adsorption capacity of phosphate at 100 mg/L and flow rate 1 mL/min reached 141.58 mg/g. The saturated QCLF could be regenerated by eluting with 1 M HCl.


  • Open Access

    Amphoteric Ion Exchange Membranes Prepared by Preirradiation-Induced Emulsion Graft Copolymerization for Vanadium Redox Flow Battery

    by Yu Cui, Xibang Chen, Yicheng Wang, Jing Peng, Long Zhao, Jifu Du, Maolin Zhai

    A series of poly(vinylidene difluoride)-based amphoteric ion exchange membranes (AIEMs) were prepared by preirradiation-induced graft copolymerization of styrene and dimethylaminoethyl methacrylate in an aqueous emulsion media followed by solution casting, sulfonation, and protonation. The effects of absorbed dose and comonomer concentration on grafting yield (GY) were investigated. The highest GY of 44.5% at a low comonomer concentration of 0.9 M could be achieved. FTIR, TGA, and X-ray photoelectron spectroscopy (XPS) confirmed the successful grafting and sulfonation of the as-prepared AIEMs. Properties of the AIEMs such as water uptake, ion exchange capacity (IEC), ionic conductivity, and crossover behavior of VO2+ ions prepared by this novel technique were systematically investigated and compared with those of the commercial Nafion 115 membrane. It was found that at a GY of 28.4%, the AIEMs showed higher IEC and conductivity, lower permeability of VO2+ ions, and a longer time to maintain open circuit voltage than Nafion 115, which was attributed to their high GY and elaborate amphoteric structure. Consequently, this work has paved the way for the development of green and low-cost AIEMs with good performance for vanadium redox flow battery applications.


  • Open Access

    Fabrication of Cotton Linter-Based Adsorbents by Radiation Grafting Polymerization for Humic Acid Removal from Aqueous Solution

    by Jifu Du, Zhen Dong, Yuxuan Pi, Xin Yang, Long Zhao

    Two kinds of cotton linter-based adsorbents were synthesized by grafting dimethylaminoethyl methacrylate (DMAEMA) on cotton linter via radiation grafting polymerization, followed by further quaternization (QCL) or protonation (PCL). The effect of radiation dose and monomer concentration on grafting yield was optimized. The synthesized adsorbents were characterized by Fourier transform infrared spectrometry (FT-IR), Thermogravimetric Analysis (TGA), scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). The adsorption behaviors of the two adsorbents toward humic acid (HA) were investigated and discussed. pH effect studies showed that QCL was pH-independent, whereas PCL was just suitable for HA adsorption with pH < 6. The adsorption kinetics of the PCL and QCL adsorbent for HA removal were better described by pseudo-second-order kinetic mode and reached equilibrium in 40 min. The adsorption isotherms of the PCL and QCL adsorbent were well fitted with both Langmuir and Freundlich isotherm models, for which adsorption capacity reached 250 mg/g and 333 mg/g at pH 6, respectively. XPS analysis revealed the ratio of two amino group species at different pH, suggesting that the interaction mechanism of the adsorbent and HA was electrostatic adsorption.