David Wragg
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
David Wragg has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Trystan Watson
Swansea University, Bay Campus, Neath, Skewen SA18EN, Wales
5 shared publications David A. Worsley
SPECIFIC, Swansea University
2 shared publications- Kirsi Yliniemi
Aalto University
2 shared publications - Matthew J. Carnie
Swansea University
2 shared publications - Benjamin Paul Wilson
School of Chemical Engineering, Aalto University
1 shared publication Bruce Philip
SPECIFIC, College of Engineering; Swansea University, Baglan Bay Innovation and Knowledge Centre; Central Avenue Baglan Port Talbot SA12 7AX UK
1 shared publication
Latest Publications
- 10 October 2013
- Published by The Electrochemical Society in ECS Transactions
- Vol. 53 (24) , 39-46
Low Cost TCO Less Counter Electrodes for Dye-Sensitized Solar Cell Application
This paper introduces a novel counter electrode material featuring a coating based on the incorporation of electrically conducting titanium nitride (TiN) particles into a polyimide (PI) matrix. The resulting hybrid system can be applied onto transparent substrates such as plain glass. The resulting composite coating is characterized with electrical conducting properties close to fluorine doped tin oxide (FTO) coated glass, a transparent conductive material widely used as a substrate in the fabrication of dye-sensitized solar cells (DSCs). This study investigates the use of TiN/PI coatings as an alternative to FTO-coated glass for the preparation of DSC counter electrodes. Platinization of the counter electrodes, a critical step aimed at catalyzing the reduction of the I3 - into I- within the electrolyte, is applied according to different techniques. DSC devices prepared on TiN/PI-coated glass counter electrodes show similar photovoltaic performance to DSCs prepared on commercial FTO-coated glass.
- 10 October 2013
- Published by The Electrochemical Society in ECS Transactions
- Vol. 53 (24) , 39-46
Low Cost TCO Less Counter Electrodes for Dye-Sensitized Solar Cell Application
This paper introduces a novel counter electrode material featuring a coating based on the incorporation of electrically conducting titanium nitride (TiN) particles into a polyimide (PI) matrix. The resulting hybrid system can be applied onto transparent substrates such as plain glass. The resulting composite coating is characterized with electrical conducting properties close to fluorine doped tin oxide (FTO) coated glass, a transparent conductive material widely used as a substrate in the fabrication of dye-sensitized solar cells (DSCs). This study investigates the use of TiN/PI coatings as an alternative to FTO-coated glass for the preparation of DSC counter electrodes. Platinization of the counter electrodes, a critical step aimed at catalyzing the reduction of the I3 - into I- within the electrolyte, is applied according to different techniques. DSC devices prepared on TiN/PI-coated glass counter electrodes show similar photovoltaic performance to DSCs prepared on commercial FTO-coated glass.
- 10 October 2013
- Published by The Electrochemical Society in ECS Transactions
- Vol. 53 (24) , 11-17
Platinized Counter Electrodes for Dye Sensitized Solar Cells through the Redox Replacement of a Low Power Electrodeposited Lead Sacrificial Template
The mass production of photovoltaics, such as dye sensitized solar cells (DSCs), is of great interest to the renewable energy generation industry. DSCs are low cost, photoelectrochemical devices that use sensitized-TiO2, to generate electricity. Due to the need for an efficient platinum redox catalyst to facilitate electron return to the oxidized dye after electron injection this communication presents a fast, high performing, low cost platinisation process, leading to a viable in-line method of applying catalytic platinum. This method entails a low power deposition of Pb onto FTO-glass followed by the redox replacement of Pb by Pt ions in solution. When applied as a DSC counter electrode, the resulting cells gave efficiencies of 3% compared with standard cells using thermally platinized counter electrodes at 3.9%.
- 10 October 2013
- Published by The Electrochemical Society in ECS Transactions
- Vol. 53 (24) , 11-17
Platinized Counter Electrodes for Dye Sensitized Solar Cells through the Redox Replacement of a Low Power Electrodeposited Lead Sacrificial Template
The mass production of photovoltaics, such as dye sensitized solar cells (DSCs), is of great interest to the renewable energy generation industry. DSCs are low cost, photoelectrochemical devices that use sensitized-TiO2, to generate electricity. Due to the need for an efficient platinum redox catalyst to facilitate electron return to the oxidized dye after electron injection this communication presents a fast, high performing, low cost platinisation process, leading to a viable in-line method of applying catalytic platinum. This method entails a low power deposition of Pb onto FTO-glass followed by the redox replacement of Pb by Pt ions in solution. When applied as a DSC counter electrode, the resulting cells gave efficiencies of 3% compared with standard cells using thermally platinized counter electrodes at 3.9%.
- 10 October 2013
- Published by The Electrochemical Society in ECS Transactions
- Vol. 53 (24) , 19-28
Monitoring the Corrosion Inhibition of Nitrogen-Containing Heterocyclic Compounds in Dye Sensitized Solar Cells
A challenge facing the successful commercialization of dye sensitized solar cells (DSCs) is in the choice of substrates used in their construction. Previous studies have shown that titanium is the current best choice for mass produced liquid state DSC due to the corrosive nature of the electrolyte, however this is an expensive material for use in large scale production. Other industrial metal substrates such as steel, nickel or aluminium have been shown previously to be prone to corrosion by the aggressive triiodide species contained in the electrolyte. In this study we show that nitrogen containing heterocyclics (NHCs) present in the electrolyte for enhancement of photovoltaic performance can also provide an additional effect of inhibiting corrosion on certain metal substrates.
- 10 October 2013
- Published by The Electrochemical Society in ECS Transactions
- Vol. 53 (24) , 19-28
Monitoring the Corrosion Inhibition of Nitrogen-Containing Heterocyclic Compounds in Dye Sensitized Solar Cells
A challenge facing the successful commercialization of dye sensitized solar cells (DSCs) is in the choice of substrates used in their construction. Previous studies have shown that titanium is the current best choice for mass produced liquid state DSC due to the corrosive nature of the electrolyte, however this is an expensive material for use in large scale production. Other industrial metal substrates such as steel, nickel or aluminium have been shown previously to be prone to corrosion by the aggressive triiodide species contained in the electrolyte. In this study we show that nitrogen containing heterocyclics (NHCs) present in the electrolyte for enhancement of photovoltaic performance can also provide an additional effect of inhibiting corrosion on certain metal substrates.
- 7 March 2013
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 22 (12) , 1267-1272
Rapid radiative platinisation for dye-sensitised solar cell counter electrodes
- 7 March 2013
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 22 (12) , 1267-1272
Rapid radiative platinisation for dye-sensitised solar cell counter electrodes
- Open Access
- 1 January 2013
- Published by Wiley in International Journal of Photoenergy
- Vol. 2013, 1-8
Corrosion Monitoring of Flexible Metallic Substrates for Dye-Sensitized Solar Cells
Two techniques for monitoring corrosion within a dye-sensitized solar cell (DSC) system are presented, which enable continuous, high sensitivity, in situ measurement of electrolyte breakdown associated with DSCs fabricated on metals. The first method uses UV/Vis reflectance spectrophotometry in conjunction with encapsulation cells, which incorporate a 25 m thick electrolyte layer, to provide highly resolved triiodide absorption data. The second method uses digital image capture to extract colour intensity data. Whilst the two methods provide very similar kinetic data on corrosion, the photographic method has the advantage that it can be used to image multiple samples in large arrays for rapid screening and is also relatively low cost. This work shows that the triiodide electrolyte attacks most metals that might be used for structural applications. Even a corrosion resistant metal, such as aluminium, can be induced to corrode through surface abrasion. This result should be set in the context with the finding reported here that certain nitrogen containing heterocyclics used in the electrolyte to enhance performance also act as corrosion inhibitors with significant stabilization for metals such as iron. These new techniques will be important tools to help develop corrosion resistant metal surfaces and corrosion inhibiting electrolytes for use in industrial scale devices.- 1 January 2013
- Published by Wiley in International Journal of Photoenergy
- Vol. 2013, 1-8
Open AccessCorrosion Monitoring of Flexible Metallic Substrates for Dye-Sensitized Solar Cells
Two techniques for monitoring corrosion within a dye-sensitized solar cell (DSC) system are presented, which enable continuous, high sensitivity, in situ measurement of electrolyte breakdown associated with DSCs fabricated on metals. The first method uses UV/Vis reflectance spectrophotometry in conjunction with encapsulation cells, which incorporate a 25 m thick electrolyte layer, to provide highly resolved triiodide absorption data. The second method uses digital image capture to extract colour intensity data. Whilst the two methods provide very similar kinetic data on corrosion, the photographic method has the advantage that it can be used to image multiple samples in large arrays for rapid screening and is also relatively low cost. This work shows that the triiodide electrolyte attacks most metals that might be used for structural applications. Even a corrosion resistant metal, such as aluminium, can be induced to corrode through surface abrasion. This result should be set in the context with the finding reported here that certain nitrogen containing heterocyclics used in the electrolyte to enhance performance also act as corrosion inhibitors with significant stabilization for metals such as iron. These new techniques will be important tools to help develop corrosion resistant metal surfaces and corrosion inhibiting electrolytes for use in industrial scale devices. - 1 January 2013
- Published by Elsevier in Electrochimica Acta
- Vol. 88, 278-286
Formation of Pt/Pb nanoparticles by electrodeposition and redox replacement cycles on fluorine doped tin oxide glass
- 1 January 2013
- Published by Elsevier in Electrochimica Acta
- Vol. 88, 278-286
Formation of Pt/Pb nanoparticles by electrodeposition and redox replacement cycles on fluorine doped tin oxide glass