Volodymyr Kyryliv
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Volodymyr Kyryliv has a total of 146 co-authors. Here are the top co-authors by number of shared publications:
- O. V. Maksymiv
Karpenko Physico-Mechanical Institute of the National Academy of Sciences of Ukraine, Lviv, Ukraine
29 shared publications - Hryhoriy Nykyforchyn
Karpenko Physico-Mechanical Institute of the National Academy of Sciences of Ukraine, Lviv, Ukraine
11 shared publications - Bohdan Tsizh
Kazimierz Wielki University; Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv
7 shared publications - Olha Zvirko
Karpenko Physico-Mechanical Institute of the National Academy of Sciences of Ukraine, Lviv, Ukraine
7 shared publications - Yaroslav Kyryliv
Department of Organization of Scientific and Research Activities of the Scientific Research Center, Lviv State University of Life Safety, Lviv, Ukraine
7 shared publications - Yuriy Kulyk
Ivan Franko National University of Lviv
7 shared publications
Latest Publications
- 4 November 2026
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Physicochemical Mechanics of Materials
- Vol. 62 (5) , 84-90
Elastic hysteresis of 40Kh steel with a surface nanostructured layer
The elastic hysteresis of 40Kh steel with a surface nanocrystalline structure (NCS) obtained by severe plastic deformation using energy of high-speed friction during mechanical-pulse treatment (MPT) was studied. An increase in the elastic threshold of this steel to 90 MPa comparing to 60 MPa for steel without it, is shown. This effect is explained by enhanced defectiveness of the nanostructure. The obtained results correlate with increased fatigue life of steels with a surface nanostructure formed by MPT.
- 4 November 2026
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Physicochemical Mechanics of Materials
- Vol. 62 (5) , 84-90
Elastic hysteresis of 40Kh steel with a surface nanostructured layer
The elastic hysteresis of 40Kh steel with a surface nanocrystalline structure (NCS) obtained by severe plastic deformation using energy of high-speed friction during mechanical-pulse treatment (MPT) was studied. An increase in the elastic threshold of this steel to 90 MPa comparing to 60 MPa for steel without it, is shown. This effect is explained by enhanced defectiveness of the nanostructure. The obtained results correlate with increased fatigue life of steels with a surface nanostructure formed by MPT.
- 9 March 2026
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Physicochemical Mechanics of Materials
- Vol. 62 (1) , 57-61
The influence of chrome and nickel in alloyed medium carbon steels on surface nanostructure formation
The influence of chrome and nickel in medium carbon steels on formation of surface nanocrystalline structure by severe plastic deformation during mechanical-pulse treatment was studied. It was established that nickel and chrome changed structural-phase state of created nanocrystalline structure, raised the relative deformation of the lattice, dislocation density and microhardness of the surface layer. It was assumed that those available alloying elements in the steels would promote wear resistance increase of their surface nanocrystalline layers.
- 9 March 2026
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Physicochemical Mechanics of Materials
- Vol. 62 (1) , 57-61
The influence of chrome and nickel in alloyed medium carbon steels on surface nanostructure formation
The influence of chrome and nickel in medium carbon steels on formation of surface nanocrystalline structure by severe plastic deformation during mechanical-pulse treatment was studied. It was established that nickel and chrome changed structural-phase state of created nanocrystalline structure, raised the relative deformation of the lattice, dislocation density and microhardness of the surface layer. It was assumed that those available alloying elements in the steels would promote wear resistance increase of their surface nanocrystalline layers.
- 10 November 2025
- Published by Springer Nature in Materials Science
- Vol. 61 (3) , 323-329
Wear resistance of nanostructural layer alloyed with nickel and chrome on the steel 45 surface
- 10 November 2025
- Published by Springer Nature in Materials Science
- Vol. 61 (3) , 323-329
Wear resistance of nanostructural layer alloyed with nickel and chrome on the steel 45 surface
- 17 October 2025
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Physicochemical Mechanics of Materials
- Vol. 61 (5) , 38-43
Influence of surface nanostructure alloying on ShKh15 steel contact fatigue
The influence of the surface alloying during formation of the surface nanocrystalline structure by severe plastic deformation on contact fatigue of ShKh15 steel in oil and corrosive-abrasive medium was studied. The alloying of the surface nanostructure increases the contact fatigue resistance while the degree of influence depends on the ratio of “useful”, “neutral” and “harmful” alloying elements as segregations on the grain boundaries. Specimens alloyed with carbon, silicium and nickel have the highest contact fatigue resistance: their contact fatigue life in oil increases in 1.9 times compared with thermal treated ones, and in corro¬sive-agressive mediun – in 4.7 times.
- 17 October 2025
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Physicochemical Mechanics of Materials
- Vol. 61 (5) , 38-43
Influence of surface nanostructure alloying on ShKh15 steel contact fatigue
The influence of the surface alloying during formation of the surface nanocrystalline structure by severe plastic deformation on contact fatigue of ShKh15 steel in oil and corrosive-abrasive medium was studied. The alloying of the surface nanostructure increases the contact fatigue resistance while the degree of influence depends on the ratio of “useful”, “neutral” and “harmful” alloying elements as segregations on the grain boundaries. Specimens alloyed with carbon, silicium and nickel have the highest contact fatigue resistance: their contact fatigue life in oil increases in 1.9 times compared with thermal treated ones, and in corro¬sive-agressive mediun – in 4.7 times.
- 1 October 2025
- Published by Springer Nature in Materials Science
- Vol. 61 (5) , 607-613
Influence of surface nanostructure alloying on ShKh15 steel contact fatigue
- 1 October 2025
- Published by Springer Nature in Materials Science
- Vol. 61 (5) , 607-613
Influence of surface nanostructure alloying on ShKh15 steel contact fatigue
- 10 June 2025
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Physicochemical Mechanics of Materials
- Vol. 61 (3) , 41-46
Wear resistance of nanostructural layer alloyed with nickel and chrome on the steel 45 surface
The wear resistance of steel 45 in oil-abrasive medium with surface nanocrystalline structure formed by severe plastic deformation using energy of high-speed friction with additional alloying with chrome and nickel from special technological media during mechanical-pulse treatment is studied. The increase of the wear resistance of steel due to surface alloying during mechanical pulse treatment comparing with the same treatment without surface alloying is shown. This is explained by the formation of the nanostructure with less grain size and higher microhardness, as well as the effect of alloying elements on the structure formation with lower electrochemical potentials, which are more favourable for secondary structures formation due to surface activation during wear resistance tests.
- 10 June 2025
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Physicochemical Mechanics of Materials
- Vol. 61 (3) , 41-46
Wear resistance of nanostructural layer alloyed with nickel and chrome on the steel 45 surface
The wear resistance of steel 45 in oil-abrasive medium with surface nanocrystalline structure formed by severe plastic deformation using energy of high-speed friction with additional alloying with chrome and nickel from special technological media during mechanical-pulse treatment is studied. The increase of the wear resistance of steel due to surface alloying during mechanical pulse treatment comparing with the same treatment without surface alloying is shown. This is explained by the formation of the nanostructure with less grain size and higher microhardness, as well as the effect of alloying elements on the structure formation with lower electrochemical potentials, which are more favourable for secondary structures formation due to surface activation during wear resistance tests.
- 6 June 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (24) , 29182-29192
Impact of Deformation Force by Vibration-Centrifugal Hardening on the Properties of the Surface Nanostructure of Steel 40Kh
- 6 June 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (24) , 29182-29192
Impact of Deformation Force by Vibration-Centrifugal Hardening on the Properties of the Surface Nanostructure of Steel 40Kh
- 1 March 2025
- Published by Springer Nature in Materials Science
- Vol. 60 (5) , 557-564
The influence of hydrogen charging on surface acoustic waves propagation in structural steel with a nanocrystalline layer
- 1 March 2025
- Published by Springer Nature in Materials Science
- Vol. 60 (5) , 557-564
The influence of hydrogen charging on surface acoustic waves propagation in structural steel with a nanocrystalline layer
- 1 January 2025
- Published by Springer Nature
- p. 79-84
Factors Affecting Nanograin Formation During Mechanical-Pulse Treatment
- 1 January 2025
- Published by Springer Nature
- p. 79-84
Factors Affecting Nanograin Formation During Mechanical-Pulse Treatment
- 1 January 2025
- Published by Springer Nature in Materials Science
- Vol. 60 (4) , 513-519
Corrosion fatigue endurance of steel 45 after surface nanostructuring by mechanical pulse treatment in different environments
- 1 January 2025
- Published by Springer Nature in Materials Science
- Vol. 60 (4) , 513-519
Corrosion fatigue endurance of steel 45 after surface nanostructuring by mechanical pulse treatment in different environments