EIElena Evgenievna Illarionova

Elena Evgenievna Illarionova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Elena Evgenievna Illarionova has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Milk protein and peptide profiles under different heat loads: Molecular analysis

    by Irina Barkovskaya, Polina Koroleva, Svetlana Turovskaya, Elena Illarionova, Vladimir Kondratenko, Vladimir Bliadze, Vladislav Yaryshev, Andrey Petrov

    Heat treatment induces structural changes in milk proteins, thus affecting the processing suitability of milk powder. Identifying new molecular markers of heat load helps to develop rapid and efficient approaches to milk powder assessment. This study utilized molecular analysis to investigate the impact of thermal treatment on the proteome and peptidome of skim milk. The skim milk samples were subjected to heat treatment at 70, 80, and 90°C for 30 s, while skim milk maintained at 45°C served as control. Two-dimensional electrophoresis made it possible to separate and evaluate protein structural changes. Peptide identification relied on matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS), preceded by trypsinolysis. A combination of Raman spectroscopy and principal component analysis visualized the heat-induced spectral responses to evaluate the potential of Raman spectroscopy for tracing the thermal history of milk powder. High pasteurization temperature reduced the number of protein fractions. MALDI-TOF MS identified 30 peptides belonging to seven major milk proteins. Peptide fragments of αS1-casein and β-casein were absent in the control but present in the experimental samples, indicating heat-induced protein transformation. The intermolecular interactions and disruption of the secondary structure of proteins resulted in differences in the isoelectric points. Raman spectroscopy revealed heat-induced changes in the wavenumber ranges of 900–1097, 1328–1437, and 1475–1546 cm–1, attributed to the transformed carbohydrate and proteomic milk profiles. The principal component analysis made it possible to visualize the differences and identify the regions that make the highest contribution to the response. Raman spectroscopy proved to be a reliable technique for developing and validating a rapid approach to assess the degree of heat load in milk.

  • Mathematical Assessment of Carbohydrate and Protein Profiles of Milk under Thermal Stress

    by Irina Barkovskaya, Vladislav Yaryshev, Vladimir Bliadze, Svetlana Turovskaya, Elena Illarionova, Vladimir Kondratenko, Aram Galstyan

    The dairy industry needs new methods for food quality assessment at all stages of production and storage. Mathematical methods offer efficient tools of product quality control. This article introduces a mathematical approach to assessing the kinetics of protein and carbohydrate profiles of milk powder to predict their transformations throughout production and storage. The study featured milk at different processing temperatures and exposure times. The analysis focused on the concentrations of compounds that mark the changes in the carbohydrate and protein profiles of milk during heat treatment. The equation of pseudo-zero-order and the Arrhenius equation were applied to carbohydrates while a first-order equation made it possible to assess the changes in proteins. The calculation algorithm was processed in Python. The lactulose, hydroxymethylfurfural, and furosine accumulations proved to depend on the integral heat load. The activation energies that provided the linearity maximum were as follows: 130 kJ/mol for lactulose and furosine; 85 kJ/mol for hydroxymethylfurfural. The calculation model failed to assess the accumulation of carbohydrate profile products during prolonged thermal exposure due to more profound product changes. β-lactoglobulin appeared to be more susceptible to thermal effects than α-lactalbumin. The activation energies for whey proteins were 72.1 and 85.1–85.7 kJ/mol, respectively. The new mathematical approach provided a reliable quantitative assessment of thermal stress that can be used for food quality control and shelf-life adjustments, e.g., in milk powder production.


  • Comparison of IR and Raman spectroscopy methods for assessing structural changes in milk during heat treatment

    by Irina A. Barkovskaya, Svetlana N. Turovskaya, Elena E. Illarionova, Vladislav Yu. Yaryshev, Vladimir G. Bliadze, Vladimir V. Kondratenko

    Introduction: Quality control of dairy products requires fast, accurate, and simple analytical methods. Infrared spectroscopy, often using imported instruments, is widely used, necessitating the development of Russian equivalents and the search for alternative control methods. One such method is Raman spectroscopy, which offers advantages such as lower sensitivity to water contamination in samples, high information yield, and the ability to convert spectral metrics into quantitative data. In Russia, this method is rarely used for milk quality analysis, making research into its adaptation and comparative evaluation with traditional approaches crucial. Purpose: A comparison of infrared and Raman spectroscopy in the analysis of skim pasteurized milk obtained under different temperature loads, and the determination of spectral ranges most sensitive to temperature for improving quality control methods for dairy products in Russian practice. Materials and Methods: Spectra were recorded on samples of skim pasteurized milk heated to 70, 80, and 90°C and held for 30 seconds. Milk heated to 45°C served as a control. Russian equipment was used: an Infraspek-1201 infrared spectrometer and an RS-IK785 Raman spectrometer. The spectra were analyzed using principal component analysis. Results: For the infrared spectra of the samples, changes were recorded in the regions of amides I-III (1640-1660 cm -1 , 1530-1550 cm -1 and 1230-1300 cm -1 , respectively), lactose (1040-1150 cm -1 ), lipid-protein complexes (2850-2950 cm -1 ) and water (3200-3400 cm -1 ). Visual differences in the spectral parameters were minimal visually and in terms of absorption (relative units). The principal component analysis allowed us to identify the contribution of the listed wavenumber ranges to the differences between the samples. Raman spectroscopy recorded pronounced differences in the zones of 280-520 cm -1 , 800-850 cm -1 , 1450 cm -1 , 1660 cm -1 and 2850-2950 cm -1 , characterizing the main components of the dairy system. A clear trend of decreasing intensity of the characteristic bands with increasing processing temperature was revealed. Principal component analysis revealed the contribution of milk components (proteins, carbohydrates, and lipids) to the differences between the samples. Conclusion: The obtained data demonstrate the higher sensitivity of Raman spectroscopy in detecting thermally induced transformations of milk components compared to infrared spectroscopy. The results confirm the potential of using the Russian Raman spectrometer for assessing the quality of dairy products.


  • Open Access

    Spoilage of Milk Powder: Mechanisms, Markers, and Detection

    by Irina Barkovskaya, Svetlana Turovskaya, Vladimir Bliadze, Elena Illarionova, Ekaterina Bolshakova

    Spoilage markers that appear during food processing and storage are important quality and safety indicators. Canned milk powder is a popular raw material used in the food industry. The identification and assessment of changes occurring at each stage of its shelf life are an important food safety issue. This review systematizes the current scientific knowledge on spoilage types, markers, mechanisms, and detection. The results may help to improve the current quality control strategy for long shelf-life dairy products. The review covered Russian and English-language publications registered in eLIBRARY.RU, Google Scholar, CyberLeninka, PubMed, and ScienceDirect in 2015-2024. The article describes the degradation of carbohydrates, fats, and proteins, as well as the most effective methods of its detection. The main processes affecting the quality of milk powder are protein-carbohydrate interactions, e.g., the Maillard reaction, as well as various forms of hydrolytic and oxidative spoilage. Despite the recent progress in the early detection of milk powder spoilage, this field of food science has some unresolved tasks, e.g., detection and monitoring of marker compounds that develop during technological processing. The data can be used to strategize the quality control, increase the stability, and extend the shelf life of canned milk powder.


  • Heat Transfer Modeling in Sweetened Condensed Milk

    by Ekaterina I. Bolshakova, Sergey V. Motylev, Vladislav C. Semipyatny, Aleksandr G. Kruchinin, Svetlana N. Turovskaya, Elena E. Illarionova

    Introduction: Sweetened condensed whole milk (SCM) is a highly demanded product among consumers and processing plants. The study of temperature profiles is essential for optimizing its logistics under extreme temperature conditions to prevent quality defects and minimize costs associated with specialized transport when delivering to regions with hot climates and the Far North, considering the absolute temperature range in Russia, which is approximately 90°C. Previously, this aspect of transportation had not been studied. The maximum allowable storage temperature for the product was set at 25°C, while the minimum temperature was not regulated. Purpose: To investigate the temperature profiles of SCM in transport packaging under various ambient conditions. Materials and Methods : A simulation of the heating and cooling processes of SCM in transport packaging, modeled as a one-dimensional multilayer system, was conducted. To describe heat transfer within the temperature ranges of 5°C to 35°C and 5°C to -35°C, a system of differential equations was formulated, with specified initial and boundary conditions. Results: According to the proposed model, the duration of heating SCM from 5°C to 35°C is 36.7 hours, while cooling from 5°C to -35°C takes 41.1 hours. Based on the study results, software was developed to calculate the duration of SCM temperature changes depending on the initial and final ambient temperatures. Conclusion: A new approach has been developed for theoretically predicting the duration of temperature changes in SCM within transport packaging during storage and transportation. This approach can be utilized in specialized business software solutions for logistics route planning, transportation cost estimation, and consideration of ambient conditions during shipping. Additionally, the proposed solution can be adapted for other food products.

  • Effect of enzymatic degradation of proteins on technological properties of whey powdered products

    by Aleksandr Kruchinin, Irina Barkovskaya, Elena Illarionova, Ekaterina Bolshakova, Svetlana Turovskaya, Aram Galstyan

    Whey protein hydrolysates (WPH) possess unique functional properties, including bioactivity, improved solubility and enhanced heat stability. These characteristics make them valuable for food applications. While it is known that enzymatic hydrolysis and heat denaturation influence the technological properties of WPH, their impact on functional characteristics has not been fully explored. This study aimed to comprehensively evaluate the technological properties of WPH obtained through enzymatic hydrolysis of native and heat‐denatured whey protein concentrates (WPC). WPC was hydrolysed using a protease complex (subtilisin, chymotrypsin) under varying conditions. The study assessed particle size, wettability, solubility, hygroscopicity and heat stability of the produced WPH. The influence of hydrolysis time, pH conditions and preliminary heat denaturation of proteins on these properties was analysed. Enzymatic hydrolysis improved WPH wettability and solubility but increased hygroscopicity at 65% and 85% relative humidity. The highest heat stability was observed after 90–180 min of hydrolysis at neutral pH, allowing WPH to withstand 95°C for 60 min and 137°C for 10 min. Lowering pH to 4.5 reduced heat stability. Preliminary heat denaturation of proteins before hydrolysis enhanced peptide bond accessibility but promoted protein aggregation, leading to decreased solubility, increased hydrophobicity and alterations in heat stability and water interactions. These findings suggest that both enzymatic hydrolysis and heat denaturation play an important role in modulating the functional properties of WPH. Optimising the balance between these processes could help tailor WPH properties for specific food applications, such as heat‐stable protein formulations. Further research is needed to refine processing conditions and enhance the functional performance of WPH in industrial applications.


  • STUDYING PROTEIN PROFILE EFFECT ON CRYSTAL FORMATION IN MODEL DAIRY SYSTEMS WITH INTERMEDIATE MOISTURE CONTENT

    by Svetlana Turovskaya, Alexandr Kruchinin, Elena Illarionova, Alana Bigaeva

    The purpose of research is to study the influence of the protein profile of model dairy systems with intermediate moisture content on the process of crystal formation of milk sugar (lactose). Research objectives: selection of formulation components for compiling a protein profile and study of its influence on the process of formation and growth of lactose crystals in model systems during storage. The objects of research were model systems with targeted adjustment of pH values in each of them, imitating skimmed condensed milk with sugar, in which the complete or partial replacement of the protein phase with whey proteins was carried out through the use of dry whey protein concentrate, dry hydrolyzed whey protein (obtained in native or denaturing conditions), dry cheese whey. Studies of microstructural changes in consistency were carried out using the method for determining the size of lactose crystals according to GOST 29245-91. It has been established that a change in the protein profile towards an increase in the content of native and transformed whey proteins in model systems led to a slowdown in the process of lactose crystal formation. At the same time, hydrolyzed whey proteins had a higher degree of crystal growth restriction. The complete replacement of the protein phase with dry whey protein concentrate and dry cheese whey contributed to the intensive growth of crystals at their initial minimum average size (relative to other samples). However, after 14 days of storage, the average crystal size in this model system was comparable to the rest of the samples (including the control), except for the sample using hydrolyzed whey proteins. Regularities of the influence of the active acidity of the medium on the size of the crystals were also revealed. A decrease in pH from 6.2 to 5.6 leads to the formation of lactose crystals of a smaller average size by 1.9–3.3 times.

  • Open Access

    Effects provided by sugar substitutes upon the quality indicators of model systems of sweetened condensed milk in storage

    by E.I. Bolshakova, A.G. Kruchinin, S.N. Turovskaya, E.E. Illarionova, E.A. Yurova, I.A. Barkovskaya, A.G. Galstyan

    Sweetened condensed milk (SCM) is a product widely used by both consumers and other food production branches. However, it contains a lot of sucrose. This study aimed to examine the effects provided by sugar substitutes, such as trehalose, isomaltulose, and polydextrose, upon the SCM sensory profile and valuable quality indicators, such as water activity, viscosity, acidity, crystals size, and Maillard reaction potential (browning index, color change, loss of free amino acids). The study was performed by making model systems of SCM (MSCMs) using the method of reconstitution of powdered ingredients. All the presented carbohydrate compositions in MSCMs provided Aw value typical of intermediate-moisture food, which contributes to the long-term shelf-life of the product. However, only 2 MSCMs with compositions consisted of isomaltulose, trehalose (22.55% and 22.55%); trehalose (28.19%), sucrose (5.64%), polydextrose (5.64%), isomaltulose (5.64%) showed the stability of Aw within 14-d storage period. Trehalose and polydextrose in MSCMs with mono-carbohydrate added fraction demonstrated their high structure-forming ability expressed in high values of dynamic viscosity (>30 Pa·s), provided not by crystallization. MSCMs containing trehalose in predominant amount in the carbohydrate compositions (≥50%) showed lower average crystal size (<16 μm) compared with other MSCMs with di- and tetra-carbohydrate added fractions with predominant amount of isomaltulose and polydextrose. Isomaltulose and polydextrose added to MSCMs led to pronounced browning, while trehalose and sucrose reduced this effect in MSCMs with di- and tetra-carbohydrate added fractions. Addition of 22.55% of polydextrose to carbohydrate fraction of MSCMs caused bitterness, while 5.64% didn't affect the taste. Based on the results of all the research conducted the most optimal carbohydrate compositions to produce SCM with lower calorie, sucrose contents and stable adequate values of processing and sensory properties were trehalose (22.55%) with isomaltulose (22.55%) and trehalose (28.19%) with sucrose (5.64%), polydextrose (5.64%), isomaltulose (5.64%).


  • Open Access

    The Influence of Storage Conditions on the Color Profile of Sweetened Condensed Whole Milk

    by Екатерина Ивановна Большакова, Irina A. Barkovskaya, Александр Геннадьевич Кручинин, Svetlana N. Turovskaya, Елена Евгеньевна Илларионова, Елена Сергеевна Орлова

    Влияние условий хранения на цветовой профиль цельного сгущенного молока с сахаром


  • Open Access

    Sweet Condensed Milk: Effect of Critical Storage Conditions on Metal Can Seams

    by Alexandr Kruchinin, Ekaterina Bolshakova, Elena Illarionova, Svetlana Turovskaya, Irina Barkovskaya