Misun Cha
Misun Cha has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
Su Hee Kim
R&D Center, Medifab Co. Ltd, Seoul 08584, Republic of Korea
2 shared publicationsBin Xu
Department of Orthopedic Surgery, College of Medicine, Seoul National University, Seoul, Republic of Korea
1 shared publicationChisung Jung
Research Institute of Biotechnology, Medifab Co, Ltd., Seoul, South Korea
1 shared publication- Donghak Kim
Biomaterials Research Center, Korea Institute of Science and Technology (KIST), 5, Hwarang-ro 14-gil, Seongbuk-gu, Seoul 02792, Korea
1 shared publication Hao-Zhen Lyu
Department of Orthopedic Surgery, College of Medicine, Seoul National University, Seoul, South Korea
1 shared publicationHyunsim Lee
1 shared publication
Latest Publications
- 7 September 2023
- Published by Japan Society of Applied Physics
Positive Feedback Field Effect Transistor Based on Vertical NAND Flash Structure for In-Memory Computing
2023 International Conference on Solid State Devices and Materials ,Positive Feedback Field Effect Transistor Based on Vertical NAND Flash Structure for In-Memory Computing
- 7 September 2023
- Published by Japan Society of Applied Physics
Positive Feedback Field Effect Transistor Based on Vertical NAND Flash Structure for In-Memory Computing
2023 International Conference on Solid State Devices and Materials ,Positive Feedback Field Effect Transistor Based on Vertical NAND Flash Structure for In-Memory Computing
- 30 April 2023
- Published by Asia Culture Academy of Incorporated Association in The Journal of Humanities and Social Sciences
- Vol. 14 (2) , 803-818
The Effect of Group Art Therapy Applying Reality Therapy on the Psychological Burnout of Social Workers
학술논문검색사이트 KISS는 학술논문,연구논문,연구자료,학술지 등 다양한 자료를 서비스하며, 주제별, 등재별, 인용지수, 인기논문, 이슈논문 등 다양한 키워드의 논문을 제공하여 빠른 학술검색 및 인용이 가능하도록 서비스합니다.
- 30 April 2023
- Published by Asia Culture Academy of Incorporated Association in The Journal of Humanities and Social Sciences
- Vol. 14 (2) , 803-818
The Effect of Group Art Therapy Applying Reality Therapy on the Psychological Burnout of Social Workers
학술논문검색사이트 KISS는 학술논문,연구논문,연구자료,학술지 등 다양한 자료를 서비스하며, 주제별, 등재별, 인용지수, 인기논문, 이슈논문 등 다양한 키워드의 논문을 제공하여 빠른 학술검색 및 인용이 가능하도록 서비스합니다.
- Open Access
- 20 December 2022
- Published by AccScience Publishing in International Journal of Bioprinting
- Vol. 9 (2) , 39-48
Development of polycaprolactone grafts with improved physical properties and body stability using a screw extrusion-type 3D bioprinter
Three-dimensional (3D) bioprinter including screw extruder was developed, and the polycaprolactone (PCL) grafts fabricated by screw-type and pneumatic pressure-type bioprinters were comparatively evaluated. The density and tensile strength of the single layers printed by the screw-type were 14.07% and 34.76% higher, respectively, than those of the single layers produced by the pneumatic pressure-type. The adhesive force, tensile strength, and bending strength of the PCL grafts printed by the screw-type bioprinter were 2.72 times, 29.89%, and 67.76% higher, respectively, than those of the PCL grafts prepared by the pneumatic pressure-type bioprinter. By evaluating the consistency with the original image of the PCL grafts, we found that it had a value of about 98.35%. The layer width of the printing structure was 485.2 ± 0.004919 µm, which was 99.5% to 101.8% compared to the set value (500 µm), indicating high accuracy and uniformity. The printed graft had no cytotoxicity, and there were no impurities in the extract test. In the in vivo studies, the tensile strength of the sample 12 months after implantation was reduced by 50.37% and 85.43% compared to the initial point of the sample printed by the screw-type and the pneumatic pressure-type, respectively. Through observing the fractures of the samples at 9- and 12-month samples, we found that the PCL grafts prepared by the screw-type had better in vivo stability. Therefore, the printing system developed in this study can be used as a treatment for regenerative medicine.
- 20 December 2022
- Published by AccScience Publishing in International Journal of Bioprinting
- Vol. 9 (2) , 39-48
Open AccessDevelopment of polycaprolactone grafts with improved physical properties and body stability using a screw extrusion-type 3D bioprinter
Three-dimensional (3D) bioprinter including screw extruder was developed, and the polycaprolactone (PCL) grafts fabricated by screw-type and pneumatic pressure-type bioprinters were comparatively evaluated. The density and tensile strength of the single layers printed by the screw-type were 14.07% and 34.76% higher, respectively, than those of the single layers produced by the pneumatic pressure-type. The adhesive force, tensile strength, and bending strength of the PCL grafts printed by the screw-type bioprinter were 2.72 times, 29.89%, and 67.76% higher, respectively, than those of the PCL grafts prepared by the pneumatic pressure-type bioprinter. By evaluating the consistency with the original image of the PCL grafts, we found that it had a value of about 98.35%. The layer width of the printing structure was 485.2 ± 0.004919 µm, which was 99.5% to 101.8% compared to the set value (500 µm), indicating high accuracy and uniformity. The printed graft had no cytotoxicity, and there were no impurities in the extract test. In the in vivo studies, the tensile strength of the sample 12 months after implantation was reduced by 50.37% and 85.43% compared to the initial point of the sample printed by the screw-type and the pneumatic pressure-type, respectively. Through observing the fractures of the samples at 9- and 12-month samples, we found that the PCL grafts prepared by the screw-type had better in vivo stability. Therefore, the printing system developed in this study can be used as a treatment for regenerative medicine.
- 21 June 2022
- Published by Wiley in Macromolecular Bioscience
- Vol. 22 (8) , e2200081
Novel Chitosan Dermal Filler with Enhanced Moldability and Elasticity
Currently, dermal fillers are largely based on commercialized cross‐linked hyaluronic acid (HA) injections, which require a large injection force. Additionally, HA can be easily decomposed by enzymes, and HA‐treated tissues present a risk of developing granuloma. In this study, a chitosan‐based dermal filler is presented that operates on a liquid‐to‐gel transition and allows the injection force to be kept ≈4.7 times lower than that required for HA injections. Evaluation of the physical properties of the chitosan filler indicates high viscoelasticity and recovery rate after gelation at 37 °C. Furthermore, in an in vivo evaluation, the liquid injection‐type chitosan filler transitions to a gel state within 5 min after injection into the body, and exhibits a compressive strength that is ≈2.4 times higher than that of cross‐linked HA. The filler also exhibits higher moldability and maintains a constant volume in the skin for a longer time than the commercial HA filler. Therefore, it is expected that the chitosan filler will be clinically applicable as a novel material for dermal tissue restoration and supplementation.
- 21 June 2022
- Published by Wiley in Macromolecular Bioscience
- Vol. 22 (8) , e2200081
Novel Chitosan Dermal Filler with Enhanced Moldability and Elasticity
Currently, dermal fillers are largely based on commercialized cross‐linked hyaluronic acid (HA) injections, which require a large injection force. Additionally, HA can be easily decomposed by enzymes, and HA‐treated tissues present a risk of developing granuloma. In this study, a chitosan‐based dermal filler is presented that operates on a liquid‐to‐gel transition and allows the injection force to be kept ≈4.7 times lower than that required for HA injections. Evaluation of the physical properties of the chitosan filler indicates high viscoelasticity and recovery rate after gelation at 37 °C. Furthermore, in an in vivo evaluation, the liquid injection‐type chitosan filler transitions to a gel state within 5 min after injection into the body, and exhibits a compressive strength that is ≈2.4 times higher than that of cross‐linked HA. The filler also exhibits higher moldability and maintains a constant volume in the skin for a longer time than the commercial HA filler. Therefore, it is expected that the chitosan filler will be clinically applicable as a novel material for dermal tissue restoration and supplementation.
- Open Access
- 22 November 2021
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 22 (22) , 12560
The Regeneration of Large-Sized and Vascularized Adipose Tissue Using a Tailored Elastic Scaffold and dECM Hydrogels
A dome-shaped elastic poly(l-lactide-co-caprolactone) (PLCL) scaffold with a channel and pore structure was fabricated by a combinative method of 3D printing technology and the gel pressing method (13 mm in diameter and 6.5 mm in thickness) for patient-specific regeneration. The PLCL scaffold was combined with adipose decellularized extracellular matrix (adECM) and heart decellularized extracellular matrix (hdECM) hydrogels and human adipose-derived stem cells (hADSCs) to promote adipogenesis and angiogenesis. These scaffolds had mechanical properties similar to those of native adipose tissue for improved tissue regeneration. The results of the in vitro real-time PCR showed that the dECM hydrogel mixture induces adipogenesis. In addition, the in vivo study at 12 weeks demonstrated that the tissue-engineered PLCL scaffolds containing the hydrogel mixture (hdECM/adECM (80:20)) and hADSCs promoted angiogenesis and adipose tissue formation, and suppressed apoptosis. Therefore, we expect that our constructs will be clinically applicable as material for the regeneration of patient-specific large-sized adipose tissue.
- 22 November 2021
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 22 (22) , 12560
Open AccessThe Regeneration of Large-Sized and Vascularized Adipose Tissue Using a Tailored Elastic Scaffold and dECM Hydrogels
A dome-shaped elastic poly(l-lactide-co-caprolactone) (PLCL) scaffold with a channel and pore structure was fabricated by a combinative method of 3D printing technology and the gel pressing method (13 mm in diameter and 6.5 mm in thickness) for patient-specific regeneration. The PLCL scaffold was combined with adipose decellularized extracellular matrix (adECM) and heart decellularized extracellular matrix (hdECM) hydrogels and human adipose-derived stem cells (hADSCs) to promote adipogenesis and angiogenesis. These scaffolds had mechanical properties similar to those of native adipose tissue for improved tissue regeneration. The results of the in vitro real-time PCR showed that the dECM hydrogel mixture induces adipogenesis. In addition, the in vivo study at 12 weeks demonstrated that the tissue-engineered PLCL scaffolds containing the hydrogel mixture (hdECM/adECM (80:20)) and hADSCs promoted angiogenesis and adipose tissue formation, and suppressed apoptosis. Therefore, we expect that our constructs will be clinically applicable as material for the regeneration of patient-specific large-sized adipose tissue.
- 7 January 2021
- Published by Springer Nature in Tissue Engineering and Regenerative Medicine
- Vol. 18 (3) , 387-397
Osteogenic Response of MC3T3-E1 and Raw264.7 in the 3D-Encapsulated Co-Culture Environment
Background: Three-dimensional (3D) in vitro cultures recapitulate the physiological microenvironment and exhibit high concordance with in vivo conditions. Improving co-culture models with different kind of cell types cultured on a 3D scaffold can closely mimic the in vivo environment. In this study, we examined the osteogenic response of pre-osteoblast MC3T3-E1 cells and Raw264.7 mouse monocytes in a 3D-encapsulated co-culture environment composed of the Cellrix® 3D culture system, which provides a physiologically relevant environment. Methods: The Cellrix® 3D Bio-Gel scaffolds were used to individually culture or co-culture two type cells in 3D microenvironment. Under 3D culture conditions, osteoblastic behavior was evaluated with an ALP assay and staining. ACP assay and TRAP staining were used as osteoclastic behavior indicator. Results: Treatment with osteoblastic induction factors (+3F) and RANKL had on positively effect on alkaline phosphatase activity but significantly inhibited to acid phosphatase activity during osteoclastic differentiation in 3D co-culture. Interestingly, alkaline phosphatase activity or acid phosphatase activity in 3D co-culture was stimulated with opposite differentiation factors at an early stage of differentiation. We guess that these effects may be related to RANK–RANKL signaling, which is important in osteoblast regulation of osteoclasts. Conclusion: In this study, the osteogenic response of 3D encapsulated pre-osteoblast MC3T3-E1 cells and mouse monocyte Raw264.7 cells was successfully demonstrated. Our 3D culture conditions will be able to provide a foundation for developing a high-throughput in vitro bone model to study the effects of various drugs and other agents on molecular pathways.
- 7 January 2021
- Published by Springer Nature in Tissue Engineering and Regenerative Medicine
- Vol. 18 (3) , 387-397
Osteogenic Response of MC3T3-E1 and Raw264.7 in the 3D-Encapsulated Co-Culture Environment
Background: Three-dimensional (3D) in vitro cultures recapitulate the physiological microenvironment and exhibit high concordance with in vivo conditions. Improving co-culture models with different kind of cell types cultured on a 3D scaffold can closely mimic the in vivo environment. In this study, we examined the osteogenic response of pre-osteoblast MC3T3-E1 cells and Raw264.7 mouse monocytes in a 3D-encapsulated co-culture environment composed of the Cellrix® 3D culture system, which provides a physiologically relevant environment. Methods: The Cellrix® 3D Bio-Gel scaffolds were used to individually culture or co-culture two type cells in 3D microenvironment. Under 3D culture conditions, osteoblastic behavior was evaluated with an ALP assay and staining. ACP assay and TRAP staining were used as osteoclastic behavior indicator. Results: Treatment with osteoblastic induction factors (+3F) and RANKL had on positively effect on alkaline phosphatase activity but significantly inhibited to acid phosphatase activity during osteoclastic differentiation in 3D co-culture. Interestingly, alkaline phosphatase activity or acid phosphatase activity in 3D co-culture was stimulated with opposite differentiation factors at an early stage of differentiation. We guess that these effects may be related to RANK–RANKL signaling, which is important in osteoblast regulation of osteoclasts. Conclusion: In this study, the osteogenic response of 3D encapsulated pre-osteoblast MC3T3-E1 cells and mouse monocyte Raw264.7 cells was successfully demonstrated. Our 3D culture conditions will be able to provide a foundation for developing a high-throughput in vitro bone model to study the effects of various drugs and other agents on molecular pathways.
- 2 February 2017
- Published by Royal Society of Chemistry (RSC) in MedChemComm
- Vol. 8 (3) , 625-632
Neuroprotective effect of single-wall carbon nanotubes with built-in peroxidase-like activity against β-amyloid-induced neurotoxicity
Carbon nanotubes (CNTs) have emerged as a leading nanomaterial for biomedical applications because of their extraordinary properties, which make them useful as delivery vehicles for drugs, proteins, and DNA into cells. However, the numerous applications of carbon nanotubes inevitably increase the potential risk of this nanomaterial. To address this issue, it is necessary to develop protocols for the effective and safe degradation of CNTs. In this study, we demonstrate a self-degradation route for single-wall carbon nanotubes mediated by the built-in peroxidase-like activity of bacterial magnetic nanoparticles (BMPs). Biocompatible BMPs which originated from Magnetospirillum sp. AMB-1 were directly conjugated through covalent bonding to functionalized SWNTs (f-SWNTs) without any additional functionalization processes. This SWNT–BMP hybrid was proven to exhibit highly synergetic peroxidase-like activity, and BMPs act as a highly effective intrinsic peroxidase for the self-degradation of BMP-decorated SWNTs. Moreover, it was shown to be an inhibitor that reduces the formation of β-amyloid (Aβ) fibrils, which are considered a key element in Alzheimer's disease. Thereby the SWNT–BMP hybrid exerts neuroprotective effects against β-amyloid (Aβ) fibrillation-induced neurotoxicity in SH-SY5Y human neuroblastoma cells. These results suggest that the SWNT–BMP hybrid could offer a new approach for treating or preventing neurodegenerative diseases.
- 2 February 2017
- Published by Royal Society of Chemistry (RSC) in MedChemComm
- Vol. 8 (3) , 625-632
Neuroprotective effect of single-wall carbon nanotubes with built-in peroxidase-like activity against β-amyloid-induced neurotoxicity
Carbon nanotubes (CNTs) have emerged as a leading nanomaterial for biomedical applications because of their extraordinary properties, which make them useful as delivery vehicles for drugs, proteins, and DNA into cells. However, the numerous applications of carbon nanotubes inevitably increase the potential risk of this nanomaterial. To address this issue, it is necessary to develop protocols for the effective and safe degradation of CNTs. In this study, we demonstrate a self-degradation route for single-wall carbon nanotubes mediated by the built-in peroxidase-like activity of bacterial magnetic nanoparticles (BMPs). Biocompatible BMPs which originated from Magnetospirillum sp. AMB-1 were directly conjugated through covalent bonding to functionalized SWNTs (f-SWNTs) without any additional functionalization processes. This SWNT–BMP hybrid was proven to exhibit highly synergetic peroxidase-like activity, and BMPs act as a highly effective intrinsic peroxidase for the self-degradation of BMP-decorated SWNTs. Moreover, it was shown to be an inhibitor that reduces the formation of β-amyloid (Aβ) fibrils, which are considered a key element in Alzheimer's disease. Thereby the SWNT–BMP hybrid exerts neuroprotective effects against β-amyloid (Aβ) fibrillation-induced neurotoxicity in SH-SY5Y human neuroblastoma cells. These results suggest that the SWNT–BMP hybrid could offer a new approach for treating or preventing neurodegenerative diseases.